design with silicones and casting materials
totalCAST Clear coating and casting jewelry
✔ Coating, sealing, Good liquid
✔ Crystal clear, UV resistant
✔ Shore D70-75
✔ Casting thickness 1 mm <> 20 mm
✔ 10-15 @23°C minutes working time
✔ Mixing ratio (Weight) 100: 100€ 42,95 € 35,50 Excl. tax
ComparePolyurethane Casting Resin A75 Flexible Kit
✔ Elastic, Strong, High details
✔ Beige, Fast, High tensile strength
✔ Shore A75
✔ Castings 1mm <> 30mm
✔ 15 minutes working time
✔ Mixing ratio (Weight) 100: 40€ 39,95 € 33,02 Excl. tax
ComparePT Flex 97
✔ Elastic, Strong, High details
✔ Yellow/Amber colored
✔ Shore A97
✔ Castings 1mm <>20mm
✔ 4 minutes working time
✔ Mixing ratio (Weight)100:100€ 38,50 € 31,82 Excl. tax
CompareCarbonfibre tape unidirectional UD 300g/m² , 50 mm
Carbon fabric tape for easy finishing of objects and as reinforcement of corners and seams. Direction of tensile force can be easily determined by the direction of the fibers.
€ 22,40 € 18,51 Excl. tax
CompareSilicone Addition Green 30 Set
✔ Flexible, Strong
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareSilicone Addition Gel 840 Water Clear
✔ Gel, Very Clear, Shock Absorbent
✔ Suitable for potting
✔ Shore (OO) 0 (Gel)
✔ Low shrinkage (<0.3%)
✔ 80 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 26,95 € 22,27 Excl. tax
CompareApoxie Super White
✔ Kneading compound, water resistant
✔ Very fine grain
✔ Very white
✔ 0% shrinkage / breakage
✔ 1 hour working time
✔ Mixing ratio (Weight) 100: 100€ 13,70 € 11,32 Excl. tax
ComparePolyurethane foam flexible 50 liquid
✔ Flexible foam
✔ Brownish
✔ Up to 20X volume increase
✔ Final density 50 kg/m³
✔ Mixing ratio by weight: 100:50€ 33,61 € 27,78 Excl. tax
CompareImpact-resistant polyurethane D75 / Neukadur Multicast 11
✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100€ 15,50 € 12,81 Excl. tax
CompareSilicone Addition Clear 25
✔ Flexible, Crystal Clear
✔ Suitable for potting
✔ Shore A 25 (Medium Hard)
✔ Low shrinkage (<0.1%)
✔ 130 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 102,92 € 85,06 Excl. tax
CompareLSR Topcoat HE
✔ Very good adhesion to silicone substrates
✔ High elongation
✔ High reactivity
✔ Neutral odour and taste (FDA)
✔ Excellent stability and flexibility at low temperatures
✔ Suitable for compliance with the food contact regulations€ 32,50 € 26,86 Excl. tax
CompareSilicone foam Closed Cell 3 - Spreadable
✔ Foam factor 3
✔ Spreadable
✔ Hardness Shore C 2-50
✔ Flame retardant UL94-HB
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 3 minutes
✔ Curing time 50 min @ 60°C
✔ Density 0.352 g/cm³€ 272,92 € 225,55 Excl. tax
CompareSilicone Addition Clear 5 (very soft)
✔ Flexible, Crystal clear
✔ Suitable for potting
✔ Shore (A) 5 (Very Soft)
✔ Low shrinkage (<0.1%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 66,50 € 54,96 Excl. tax
CompareSilicone Addition Colorless 25 (average hardness)
✔ Flexible, Strong
✔ Translucent
✔ Shore (A) 25 (average hardness)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100€ 28,95 € 23,93 Excl. tax
CompareSilicone foam Open Cell 6
✔ Foam factor 6
✔ Hardness Shore C 4
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 2 hours
✔ Density 0.193 g/cm³€ 272,92 € 225,55 Excl. tax
CompareWax Modeling Wax Medium Hard
✔ Moderately Hard Modeling Wax, Not grainy
✔ Copper colored, Block
✔ No shrinkage
✔ Pour point 61 ° C
✔ Melting point 65 ° C
✔ Ash content after combustion <0.03%€ 19,95 € 16,49 Excl. tax
CompareSilicone Addition Yellow 25 Set
✔ Flexible, Strong
✔ Yellow
✔ Shore (A) 25 (Moderately Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareSilicone foam Open Cell 7 - Spreadable
✔ Foam factor 7
✔ Spreadable
✔ Hardness Shore C 5-10
✔ Flame retardant UL94-V0
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 70 min @ 60°C
✔ Density 0.162 g/cm³€ 272,92 € 225,55 Excl. tax
CompareCarbon fabric Twill 200 g/m2
Carbon Twill weave is mainly used for its high stiffness, especially in motorsport, aircraft construction and yacht building.
€ 39,95 € 33,02 Excl. tax
CompareCarbonfibre tape 200g/m² , 100 mm
Carbon fabric tape for easy finishing of objects and for reinforcement of corners and seams. Can also be used for winding / reinforcing pipes, rackets and hockey sticks.
€ 4,50 € 3,72 Excl. tax
CompareMini Polishing machine - BTC Line Blue 12V
✔ Compact polisher
✔ Includes bag, battery and discs
✔ Very useful for small surfaces and complex shapes€ 84,50 € 69,83 Excl. tax
CompareEpoxy Resin Art Kit
✔ Complete Epoxy Resin Art kit
✔ Including four colors
✔ Easy to use€ 36,95 € 30,54 Excl. tax
CompareElastosil M 4670
✔ High-quality silicone from Wacker
✔ Fast and non-shrink curing at room temperature
✔ Shore A 55
✔ Food safe (FDA / BfR compliant)
✔ High tear strength
✔ Stable mechanical properties
✔ Excellent resistance to casting resins€ 281,75 € 232,85 Excl. tax
Compare
In the world of art and design silicones are more and more used as an end product because of their properties. Of course silicones are still very often used as a mold for detailed objects too.
If silicone material is intended to be the final product, we advise to use addition curing silicone. These kind of silicones are stable over many years and do not degrade because of UV or weather influences.
There are many types of silicones, with different hardness and ductility. Some silicones are even transparent or crystal clear which makes coloring them easier or which makes them suitable to be used in lighting projects.
Silicones are used for example as flexible lampshades or in beautiful bright objects in which LEDs are used.
Also you can use silicon as a mold for casting acrylic resins, PU or epoxy or concrete. So you can achieve cool or quirky designs. For example, create your own concrete frame or lamp, or create decorative pillars with acrylic resin.