In the world of art and design silicones are more and more used as an end product because of their properties. Of course silicones are still very often used as a mold for detailed objects too. If silicone material is intended to be the final product, we advise to use...
A1 Acrylic Resin is strong, eco-friendly and versatile for casting and laminating. Easy to mix, shrink-free and fire-resistant. Suitable for indoor and outdoor use when used with a sealer. Perfect for art, molds and sculptures!
✔ Very strong and impact resistant
✔ Clear and highly UV-resistant
✔ Shore D85
✔ Castings 1mm <> 50mm
✔ 20-25 minutes working time
✔ Mixing ratio (Weight) 100: 50
Ebalta SG 2000 L is a fast-curing polyurethane casting resin for strong, detailed castings up to 80 mm. Ideal for molds, prototypes, and models. Use with or without filler. Easy 1:1 mix ratio, high Shore D hardness, and excellent heat resistance.
✔ Heat resistant up to 95 ° C
✔ Crystal clear UV-resistant
✔ Shore D75-80
✔ Casting thickness 0.5 mm <> 5mm
✔ 90 minutes working time
✔ Mixing ratio (Weight) 100: 50
Fast-curing, high-strength polyurethane casting resin for precise molds, models, and prototypes. Cures in just 15 minutes, low shrinkage, excellent detail. Ideal for professionals, engineers, and makers.
✔ Hard, Retains its shape quickly
✔ Beige, Strong, Very fluid
✔ Shore D 77 Unfilled
✔ Castings max 10mm unfilled to 40mm filled
✔ 2.5 minutes working time
✔ Mixing ratio (Weight) 100: 100
✔ Glass temperature 112°C
✔ Especially for casting thick objects
✔ Can be processed up to 20 kg ** in one go
✔ Clear, colorless, UV blocker
✔ Temperature resistant up to 80 ° C
✔ Shore D 75
✔ Castings 5 cm <> 20 cm
✔ 40 minutes working time *
✔ Mixer. (Weight) 100:33
✔ Moderately Hard Modeling Wax, Not grainy
✔ Copper colored, Block
✔ No shrinkage
✔ Pour point 61 ° C
✔ Melting point 65 ° C
✔ Ash content after combustion <0.03%
✔ Flexible, Crystal Clear
✔ Suitable for potting
✔ Shore A 25 (Medium Hard)
✔ Low shrinkage (<0.1%)
✔ 130 minutes of working time
✔ Mixing ratio (Weight) 100: 100
The C-Glass fabric can be applied in different processes (e. g. by using low pressure) in order to achieve visually and chemically improved surfaces. The binder disperses quickly in the resin, therefore it is possible to handle complex geometries and curves.
✔ Elastic, Strong, High details
✔ Amber, Fast, High pulling power
✔ Shore A 40
✔ Castings 1mm <> 60 mm.
✔ 23-27 minutes handling time
✔ Mixing ratio (Weight) 100:50
✔ Elastic, Strong, High details
✔ Pale yellow, High tear strength
✔ Shore A 60
✔ Castings 1mm <> 60 mm.
✔ 12 minutes handling time
✔ Mixing ratio (Weight) 100:50
✔ Very high stretch
Apoxie Sculpt is a self-hardening, waterproof epoxy clay perfect for sculpting, modeling, and repairs. Easy to mix and shape, adheres to most surfaces, and cures rock-hard. Sand, paint or drill after curing. Ideal for artists and professionals alike.
✔ For medium-sized objects
✔ Clear, colorless, With the best UV stability available in Epoxy
✔ Temperature resistant up to 46°C
✔ Shore D 85 to D 21
✔ Castings 1 cm - 9 cm
✔ 19 hours @23 °C* demould ime
✔ Mix ratio. (Weight)100:40
✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100
✔ Very good adhesion to silicone substrates
✔ High elongation
✔ High reactivity
✔ Neutral odour and taste (FDA)
✔ Excellent stability and flexibility at low temperatures
✔ Suitable for compliance with the food contact regulations
✔ High-quality silicone from Wacker
✔ Fast and non-shrink curing at room temperature
✔ Shore A 55
✔ Food safe (FDA / BfR compliant)
✔ High tear strength
✔ Stable mechanical properties
✔ Excellent resistance to casting resins
✔ Foam factor 6
✔ Hardness Shore C 4
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 2 hours
✔ Density 0.193 g/cm³
In the world of art and design silicones are more and more used as an end product because of their properties. Of course silicones are still very often used as a mold for detailed objects too.
If silicone material is intended to be the final product, we advise to use addition curing silicone. These kind of silicones are stable over many years and do not degrade because of UV or weather influences.
There are many types of silicones, with different hardness and ductility. Some silicones are even transparent or crystal clear which makes coloring them easier or which makes them suitable to be used in lighting projects.
Silicones are used for example as flexible lampshades or in beautiful bright objects in which LEDs are used.
Also you can use silicon as a mold for casting acrylic resins, PU or epoxy or concrete. So you can achieve cool or quirky designs. For example, create your own concrete frame or lamp, or create decorative pillars with acrylic resin.
