Jewellery
Molds for jewelery or materials such as synthetic resins for casting jewelry.
Porcelain gypsum plaster
✔ Fine ceramic powder with high density
✔ White, paintable
✔ Exceptionally hard
✔ Powder: water = 4: 1
✔ Working time: 6 minutes
✔ De-mold time: 30 minutes€ 5,95 € 4,92 Excl. tax
CompareSilicone Condensation 20 universal Set
✔ Flexible, Strong, Universal
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 20 minutes working time
✔ Mix ratio (Weight) 100:5€ 14,48 € 11,97 Excl. tax
CompareApoxie Sculpt
✔ Kneading mass, water resistant ✔ Smooth consistency ✔ Many different colours ✔ 0% shrinkage/breakage ✔ 2-3 hours working time ✔ Mixing ratio (weight) 100:100
€ 14,75 € 12,19 Excl. tax
CompareEbalta SG 2000 L Polyurethane Casting Resin D80 Set
✔ Very Hard, Medium Castings
✔ Beige, Strong, High details
✔ Shore D 70-75 Unfilled
✔ Castings 1mm <> 100mm
✔ 6-8 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 27,18 € 22,46 Excl. tax
CompareSilicone Addition Colorless 5 (very soft)
✔ Flexible, Strong
✔ Translucent
✔ Shore (A) 5 (Very soft)
✔ Low shrinkage (<0.1%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 28,95 € 23,93 Excl. tax
ComparePolyurethane / Epoxy dye
✔ Gives a color to polyurethane and epoxy
✔ Choice of many colors
✔ Very concentrated, colors strongly€ 4,95 € 4,09 Excl. tax
CompareSilicone Addition Colorless 50 (hard)
✔ Flexible, Strong
✔ Translucent
✔ Shore (A) 50 (Hard)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100€ 28,95 € 23,93 Excl. tax
CompareApoxie Clay
✔ Kneading compound, water resistant
✔ Clay-like texture / Grainy
✔ Colors: white or native
✔ 0% shrinkage / breakage
✔ 1-3 hours working time
✔ Mixing ratio (volume) = 100: 100€ 17,75 € 14,67 Excl. tax
CompareSilicone Addition Pink 10
✔ Flexible, Strong
✔ Pink
✔ Shore (A) 10 (Soft)
✔ Low shrinkage (<0.1%)
✔ 40 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 36,25 € 29,96 Excl. tax
ComparePlaster bandage
This plaster is perfect for making support caps for molds from alginate or silicone
€ 9,95 € 8,22 Excl. tax
CompareMicrocrystalline wax LMP slab
✔ Basic wax, Mixed wax, Shell wax
✔ Natural, Flexible, Plate, Soft
✔ A lot of shrinkage
✔ Pour point 64 ° C
✔ Melting point 68 ° C
✔ Ash content after combustion <0.03%€ 4.116,42 € 3.402,- Excl. tax
CompareCasting wax for Jewellery
✔ Small jewelry, lots of detail
✔ Blue, Pastilles, slightly flexible
✔ Low shrinkage
✔ Pour point 66 ° C
✔ Melting point 75 ° C
✔ Ash content after combustion <0.03%€ 21,59 € 17,84 Excl. tax
CompareStensil ECO 70 Blue
✔ Kneadable silicone, Strong, Blue
✔ Shore (A) 70
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100€ 21,- € 17,36 Excl. tax
CompareUltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C
✔ Heat resistant up to 95 ° C
✔ Crystal clear UV-resistant
✔ Shore D75-80
✔ Casting thickness 0.5 mm <> 5mm
✔ 90 minutes working time
✔ Mixing ratio (Weight) 100: 50€ 29,99 € 24,79 Excl. tax
CompareSilicone Addition Colorless 25 (average hardness)
✔ Flexible, Strong
✔ Translucent
✔ Shore (A) 25 (average hardness)
✔ Low shrinkage (< 0.1 %)
✔30 minutes working time
✔ Mixing ratio by weight: 100:100€ 28,95 € 23,93 Excl. tax
CompareSilicone Condensation 20 for PU and epoxy
✔ Flexible, Strong, good resistance to pu and epoxy
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100: 5€ 19,45 € 16,07 Excl. tax
CompareSilicone Condensation 20 A component
✔ Flexible, Strong, Universal
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 20 minutes working time
✔ Mix ratio (Weight) 100:5€ 18,- € 14,88 Excl. tax
ComparePolyurethane Casting Resin D70 Fast
✔ Perfect for molds & models – High level of detail ✔ Easy to process – Easy to mix & pour ✔ Fast curing – De-moulding time from 15 min ✔ With or without filler – Up to 40 mm thick ✔ Mixing ratio – A:B = 1:1 / A:B:V = 1:1:3
€ 27,18 € 22,46 Excl. tax
CompareSilicone Condensation 5 A component - Soft
✔ Flexible, Strong, Universal
✔ White, Good Flow, Bleeding
✔ Shore (A) 3-7 soft
✔ Stretchable > 400%
✔ Low shrinkage (< 0.3 %)€ 13,31 € 11,- Excl. tax
CompareAll-Round Epoxy Casting Resin
✔ Very strong and impact resistant
✔ Clear and highly UV-resistant
✔ Shore D85
✔ Castings 1mm <> 50mm
✔ 20-25 minutes working time
✔ Mixing ratio (Weight) 100: 50€ 10,50 € 8,68 Excl. tax
CompareImpact-resistant polyurethane D75 / Neukadur Multicast 11
✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100€ 15,50 € 12,81 Excl. tax
CompareSilicone Addition Green 30 Set
✔ Flexible, Strong
✔ Green
✔ Shore (A) 30 (Hard)
✔ Low shrinkage (<0.1%)
✔ 60 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 31,50 € 26,03 Excl. tax
CompareApoxie Super White
✔ Kneading compound, water resistant
✔ Very fine grain
✔ Very white
✔ 0% shrinkage / breakage
✔ 1 hour working time
✔ Mixing ratio (Weight) 100: 100€ 13,70 € 11,32 Excl. tax
CompareB 5 - B component for Silicone Condensation 5, 20 and 35 universal
✔ Low dosage (5%)
✔ Low shrinkage (< 0.3 %)
✔ Mixing ratio (Weight) 100:5
✔ Works on most condensation curing silicones€ 4,78 € 3,95 Excl. tax
Compare
Small jewelery of silver and gold etc are traditionally made using the lost wax method. For this we have beautiful wash our range. Of course we can also supply the gypsum used in cuvettes.
Jewellery can of course also be made of transparent materials, or even flexible. Our clear resins are nice to work and are suitable to pour something in or just to create a nice shape. Use for example the crystal clear epoxy or PU casting systems.