Additives
Various additives to apply to acrylic resin or plaster. Slow down, accelerate, seal or lighten / aggravate.
Aluminum powder
€ 15,95 € 13,18 Excl. tax
100% Aluminum powder can be used as a filler in paints, lacquers, epoxies, polyester and polyurethanes. Grain size: 0,009- 0,100 mm.
CompareIron powder
€ 14,50 € 11,98 Excl. tax
100% Iron powder can be used as a filler in paints, lacquers, epoxies, polyester and polyurethanes. Grain size: <0.063 mm.
CompareFiller glass beads (hollow)
€ 5,05 € 4,17 Excl. tax
✔ Microscopic small glass beads
Compare
✔ Makes the end product lighter
✔ Increases the maximum casting thickness
✔ Extends the processing timeCopper powder
€ 84,95 € 70,21 Excl. tax
✔ 100% Copper powder can be used as a filler in paints, lacquers, epoxies, polyester and polyurethanes. Grain size: <0.063 mm.
CompareA1 ATP Powder
€ 9,98 € 8,25 Excl. tax
A1 ATP Powder is a volume thickener. This allows the A1 to be thickened to filling thickness.
CompareBronze powder Yellow
€ 49,25 € 40,70 Excl. tax
100% Bronze powder can be used as a filler in paints, lacquers, epoxies, polyester and polyurethanes. Grain size: <0.063 mm. Yellow color
CompareBrass powder
€ 335,- € 276,86 Excl. tax
100% Brass powder can be used as a filler in paints, lacquers, epoxies, polyester and polyurethanes. Grain size: <0.063 mm.
CompareA1 Acrylic resin Retarder
€ 7,25 € 5,99 Excl. tax
✔ Retardant for the A1 acrylic resin
Compare
✔ Extend the processing time of acrylic resin to more than 2 hours!
✔ Maximum 1% addition to A1 acrylic resin liquidA1 Thixotropic A
€ 7,50 € 6,20 Excl. tax
A1 Thix A is an additive to thicken the product into a gel.
CompareA1 Accelerator
€ 7,25 € 5,99 Excl. tax
A1 Accelerator can be used to reduce the processing time of the A1 Acrylic Resin. Always add the A1 Accelerator to the A1 Liquid. Limit the amount of A1 Accelerator used to a maximum of 1% of the total weight. A1 Accelerator can also be used to corre
CompareA1 Diluent
€ 4,96 € 4,10 Excl. tax
A1 Diluent reduces the viscosity of A1. This allows for casting of complex products or adding more filler. It can affect the processing time. Use a maximum of 5% relative to the total weight.
Compare
