Collection
Conical aluminium can, 25 liter content
Conical can for 25 litres. Made out of sheet steel . Comes with lid, sealing ring and lock pin.
€ 20,95 € 17,31 Excl. tax
CompareSulzer Mixpac™ Cartridges 1500 ml.
✔ Cartridges for Sulzer Mixpac™ DM 1500-01 Dispenser - 2K mixing system
✔ Consists of a cartridge with a pre-assembled cap and two separate pistons
✔ Made of Polypropylene plastic€ 14,52 € 12,- Excl. tax
CompareTransparent colourant for polyurethane & epoxy resin
Transparent colourant for polyurethane or epoxy resin
€ 4,95 € 4,09 Excl. tax
Compare2-Component Cartridges 900 ml. ± 200 pieces
Volume: 900 ml
Material: PP
Design: piston superior
Length: 65,1:46,0 mm
Ø A-tube : Ø B-tube: 216,5 mm
Mixing ratio: 2:1€ 300,- € 247,93 Excl. tax
Compare3M 4251+ Gas/Vapour and particulate respirator
✔ 3M 4251+ Gas/Vapour and particulate respirator
€ 39,95 € 33,02 Excl. tax
Compare3M 6055 Gas filter A2 set of 2 pieces
✔ Protection against organic vapors and gases (with boiling point above 65 ° C)
✔ Standard: EN 143
✔ Packed per 2 pieces
✔ Compatible with 3M 6000 and 7000 series half and full face masks
✔ A precise and secure lock
✔ Lightweight€ 22,30 € 18,43 Excl. tax
Compare3M Half Face Mask 6502QL MEDIUM
Reusable by replacing filters, protection against organic vapors and gases
€ 48,- € 39,67 Excl. tax
Compare3M Overall 4540+
Meets a protection type CE type 5 and 6 and is soft and light
€ 7,75 € 6,41 Excl. tax
Compare5 ltr conical tin can blank/blank UN
Conical can for 5 litres. Comes with lid, sealing ring and lock pin.
€ 12,75 € 10,54 Excl. tax
CompareA1 Accelerator
A1 Accelerator can be used to reduce the processing time of the A1 Acrylic Resin. Always add the A1 Accelerator to the A1 Liquid. Limit the amount of A1 Accelerator used to a maximum of 1% of the total weight. A1 Accelerator can also be used to correct an
€ 7,25 € 5,99 Excl. tax
CompareA1 Acrylic Resin
A1 Acrylic Resin is strong, eco-friendly and versatile for casting and laminating. Easy to mix, shrink-free and fire-resistant. Suitable for indoor and outdoor use when used with a sealer. Perfect for art, molds and sculptures!
€ 15,95 € 13,18 Excl. tax
CompareA1 Acrylic resin Retarder
✔ Retardant for the A1 acrylic resin
✔ Extend the processing time of acrylic resin to more than 2 hours!
✔ Maximum 1% addition to A1 acrylic resin liquid€ 7,25 € 5,99 Excl. tax
CompareA1 ATP Powder
A1 ATP Powder is a volume thickener. This allows the A1 to be thickened to filling thickness.
€ 9,98 € 8,25 Excl. tax
CompareA1 Diluent
A1 Diluent reduces the viscosity of A1. This allows for casting of complex products or adding more filler. It can affect the processing time. Use a maximum of 5% relative to the total weight.
€ 4,96 € 4,10 Excl. tax
CompareA1 Sealer Plus - Gloss
✔ 1 component
✔ solvent free
✔ water-based
✔ quick drying
✔ easy to apply
✔ good UV resistance
✔ excellent adhesion
✔ protection against dirt absorption
✔ good protection against moisture€ 11,50 € 9,50 Excl. tax
CompareA1 Sealer Plus - Matt
✔ 1 component
✔ solvent free
✔ water-based
✔ quick drying
✔ easy to apply
✔ good UV resistance
✔ excellent adhesion
✔ protection against dirt absorption
✔ good protection against moisture€ 11,50 € 9,50 Excl. tax
CompareA1 Sealer Plus - Satin
✔ 1 component
✔ solvent free
✔ water-based
✔ quick drying
✔ easy to apply
✔ good UV resistance
✔ excellent adhesion
✔ protection against dirt absorption
✔ good protection against moisture€ 11,50 € 9,50 Excl. tax
CompareA1 Thixotropic A
A1 Thix A is an additive to thicken the product into a gel.
€ 7,50 € 6,20 Excl. tax
CompareA1 Triaxial glass fibre fabric
✔ For reinforcement in acrylic resin, silicone or polyester.
✔ Easier to drape than a regular fabric.
✔ 160 g / m²€ 6,50 € 5,37 Excl. tax
CompareAcrylic resin color paste
Color your acrylic resin cast thoroughly with beautiful vibrant colors.
€ 6,95 € 5,74 Excl. tax
CompareAdbond Advantage
Remasol Adbond Advantage has an increased adhesion to wax surfaces making it an ideal primary binder. A ready to use solution, optimised for the best performance.
€ 146,45 € 121,03 Excl. tax
CompareAlginat 3D-Gel - Slow - 0.5 kg
✔ 100% Natural, 100% Safe
✔ Discolored from Purple to Blue
✔ Suitable for bust, belly print, face
✔ Relatively strong after gelling
✔ 9 minutes de-mold time at 21 ° C Water
✔ Mixing ratio (Weight) [gel: water] 1: 4€ 11,50 € 9,50 Excl. tax
Compare
