Collection

Sanding Paper

€ 0,89 € 0,74 Excl. tax

Water resistant sandpaper. Available in different grain sizes. Excellent for sanding hard surfaces. Silicon carbide with a hard, sharp-edged structure.

5 ltr conical tin can blank/blank UN

€ 12,75 € 10,54 Excl. tax

Conical can for 5 litres. Comes with lid, sealing ring and lock pin.

Silicone Condensation accelerator

€ 12,- € 9,92 Excl. tax

✔ Accelerator for condensation silicone
✔ Shorten the de-mould time
✔ White
✔ 0.1% to 2% addition

Epoxy Support Cap EPOPAST 402/400

€ 338,- € 279,34 Excl. tax

✔ Low odor
✔ Low density
✔ Easy processing
✔ Temperature resistant 70°C

Burst RSD 100

€ 19,95 € 16,49 Excl. tax

Burst 100 Antifoam provides outstanding performance under many different conditions. It is compatible with a wide variety of wetting agents, and can tolerate both alkaline and acidic binder systems.

Polydimethylsiloxane, aminofunctional

€ 27,62 € 22,83 Excl. tax

✔ 100% active amino-functional silicone oil
✔ Lower amine content but higher molecular weight than standard amino oils
✔ Easy to emulsion
✔ Less reactive than other amino-functional silicones/siloxanes
✔ Gloss enhancing

Elastosil RT 602

€ 74,- € 61,16 Excl. tax

✔ All-round potting agent
✔ Addition-hardening
✔ Liquid
✔ Good heat stability
✔ Very transparent
✔ Two-component 9:1
✔ Shore (A) 45

Eccentric Polishing Machine - BTC Line Blue Dual Action

€ 175,- € 144,63 Excl. tax

Easily polish with an eccentric polisher. It does not only rotate, but also rotates on its own axis. This makes polishing even for the novice possible .

Dispenser manual Sulzer Mixpac™ DM 1500-01

€ 629,79 € 520,49 Excl. tax

✔ Professional dispenser
✔ Manual dosing
✔ Suitable for 1:1, 2:1, 3:1, 4:1 ratio cartridges
✔ 1500 ml. capacity
✔ Excluding cartridges and mixing tubes

Wacker Elastosil RT 480 Spreadable silicone

€ 48,95 € 40,45 Excl. tax

✔ Pasty (250,000 mPa s)
✔ Strong
✔ Light gray
✔ Shore (A) 55 (Flexible Stiff)
✔ Low shrinkage (0.25 to 0.5%)
✔ 20 or 120 minutes working time
✔ Mixing ver. (Weight)100:3 or 4

Stensil ECO 50 L Pink

€ 21,- € 17,36 Excl. tax

✔ Kneadable silicone, Strong, pink
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100

Stensil ECO 30 Sand

€ 21,- € 17,36 Excl. tax

✔ Kneadable silicone, Strong, Sand
✔ Shore (A) 30
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100

Sulzer Mixpac™ Quadro™ MFQ 08-32D Mixing Tube

€ 5,- € 4,13 Excl. tax

✔ Inner diameter: 8.7 mm.
✔ Number of elements: 32
✔ Length: 198mm.
✔ Contents full (approx.): 14.75 ml.

Sulzer Mixpac™ Cartridges 1500 ml.

€ 14,52 € 12,- Excl. tax

✔ Cartridges for Sulzer Mixpac™ DM 1500-01 Dispenser - 2K mixing system
✔ Consists of a cartridge with a pre-assembled cap and two separate pistons
✔ Made of Polypropylene plastic

Vacuum pump for casting resins and silicone

-13% Sale

€660,- € 577,- € 476,86 Excl. tax

Compact design with low weight and excellent quality. For venting epoxy, polyester, polyurethane, silicone, etc.

Vinyl Dimethicone 100 cSt

€ 21,25 € 17,56 Excl. tax

A vinyl end capped polydimethylsiloxan (both ends) with a viscosity of 100 cSt.
The building block for many low viscosity silicone formulations

Remasil 50 Aluminosilicate Refractory Flour & Sand

€ 85,- € 70,25 Excl. tax

With Remasil 50 you can produce investment casting shells of excellent refractoriness and high temperature stability, at an incredibly economical rate.

Resi-BLAST Art Dispersion Media

€ 19,95 € 16,49 Excl. tax

With Resi-Blast you can create unique cell structures in epoxy casting resins.

Vinyl D4, retarder for addition curing silicones

€ 52,95 € 43,76 Excl. tax

Retarder to prolong working time of addition curing silicone

Elastosil M 4514 Set

€ 163,05 € 134,75 Excl. tax

✔ Very good flowability and self-deaeration
✔ Low Shore A hardness (approx. 25)
✔ Excellent tear strength
✔ High elongation and flexibility
✔ Outstanding chemical resistance to attack by polyester and polyurethane resins, mold life is s

A1 Thix A

€ 5,95 € 4,92 Excl. tax

A1 Thixotrope A is an additive to thicken the A1 Acrylic resin set. This way you can make gels or paste like material.

T51 B component for condensatie silicone

€ 6,05 € 5,- Excl. tax

✔ 5% dosage
✔ dry, stretchy result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to polyester
✔ Mixing ratio (Weight) 100:5

ELASTOSIL® C 1200 A/B

€ 453,66 € 374,93 Excl. tax

✔ Suitable for the production of reusable silicone vacuum bags.
✔ Fast curing at room temperature
✔ No chemical shrinkage
✔ Resistance to epoxy resins
✔ Resistance to polyester
✔ Two components 1:1
✔ blue / Transparent

Chemlease Mold Cleaner EZ

€ 29,95 € 24,75 Excl. tax

Chemlease® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds.