Collection
Sanding Paper
Water resistant sandpaper. Available in different grain sizes. Excellent for sanding hard surfaces. Silicon carbide with a hard, sharp-edged structure.
€ 0,89 € 0,74 Excl. tax
Compare5 ltr conical tin can blank/blank UN
Conical can for 5 litres. Comes with lid, sealing ring and lock pin.
€ 12,75 € 10,54 Excl. tax
CompareSilicone Condensation accelerator
✔ Accelerator for condensation silicone
✔ Shorten the de-mould time
✔ White
✔ 0.1% to 2% addition€ 12,- € 9,92 Excl. tax
CompareEpoxy Support Cap EPOPAST 402/400
✔ Low odor
✔ Low density
✔ Easy processing
✔ Temperature resistant 70°C€ 338,- € 279,34 Excl. tax
CompareBurst RSD 100
Burst 100 Antifoam provides outstanding performance under many different conditions. It is compatible with a wide variety of wetting agents, and can tolerate both alkaline and acidic binder systems.
€ 19,95 € 16,49 Excl. tax
ComparePolydimethylsiloxane, aminofunctional
✔ 100% active amino-functional silicone oil
✔ Lower amine content but higher molecular weight than standard amino oils
✔ Easy to emulsion
✔ Less reactive than other amino-functional silicones/siloxanes
✔ Gloss enhancing€ 27,62 € 22,83 Excl. tax
CompareElastosil RT 602
✔ All-round potting agent
✔ Addition-hardening
✔ Liquid
✔ Good heat stability
✔ Very transparent
✔ Two-component 9:1
✔ Shore (A) 45€ 74,- € 61,16 Excl. tax
CompareEccentric Polishing Machine - BTC Line Blue Dual Action
Easily polish with an eccentric polisher. It does not only rotate, but also rotates on its own axis. This makes polishing even for the novice possible .
€ 175,- € 144,63 Excl. tax
CompareDispenser manual Sulzer Mixpac™ DM 1500-01
✔ Professional dispenser
✔ Manual dosing
✔ Suitable for 1:1, 2:1, 3:1, 4:1 ratio cartridges
✔ 1500 ml. capacity
✔ Excluding cartridges and mixing tubes€ 629,79 € 520,49 Excl. tax
CompareWacker Elastosil RT 480 Spreadable silicone
✔ Pasty (250,000 mPa s)
✔ Strong
✔ Light gray
✔ Shore (A) 55 (Flexible Stiff)
✔ Low shrinkage (0.25 to 0.5%)
✔ 20 or 120 minutes working time
✔ Mixing ver. (Weight)100:3 or 4€ 48,95 € 40,45 Excl. tax
CompareStensil ECO 50 L Pink
✔ Kneadable silicone, Strong, pink
✔ Shore (A) 50
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100€ 21,- € 17,36 Excl. tax
CompareStensil ECO 30 Sand
✔ Kneadable silicone, Strong, Sand
✔ Shore (A) 30
✔ Low shrinkage (< 0.1 %)
✔ 90 Seconds working time @ 20°C
✔ Mixing Ver. (Weight)100:100€ 21,- € 17,36 Excl. tax
CompareSulzer Mixpac™ Quadro™ MFQ 08-32D Mixing Tube
✔ Inner diameter: 8.7 mm.
✔ Number of elements: 32
✔ Length: 198mm.
✔ Contents full (approx.): 14.75 ml.€ 5,- € 4,13 Excl. tax
CompareSulzer Mixpac™ Cartridges 1500 ml.
✔ Cartridges for Sulzer Mixpac™ DM 1500-01 Dispenser - 2K mixing system
✔ Consists of a cartridge with a pre-assembled cap and two separate pistons
✔ Made of Polypropylene plastic€ 14,52 € 12,- Excl. tax
CompareVacuum pump for casting resins and silicone
Compact design with low weight and excellent quality. For venting epoxy, polyester, polyurethane, silicone, etc.
-13% Sale
660,- € 577,- € 476,86 Excl. tax
CompareVinyl Dimethicone 100 cSt
A vinyl end capped polydimethylsiloxan (both ends) with a viscosity of 100 cSt.
The building block for many low viscosity silicone formulations€ 21,25 € 17,56 Excl. tax
CompareRemasil 50 Aluminosilicate Refractory Flour & Sand
With Remasil 50 you can produce investment casting shells of excellent refractoriness and high temperature stability, at an incredibly economical rate.
€ 85,- € 70,25 Excl. tax
CompareResi-BLAST Art Dispersion Media
With Resi-Blast you can create unique cell structures in epoxy casting resins.
€ 19,95 € 16,49 Excl. tax
CompareVinyl D4, retarder for addition curing silicones
Retarder to prolong working time of addition curing silicone
€ 52,95 € 43,76 Excl. tax
CompareElastosil M 4514 Set
✔ Very good flowability and self-deaeration
✔ Low Shore A hardness (approx. 25)
✔ Excellent tear strength
✔ High elongation and flexibility
✔ Outstanding chemical resistance to attack by polyester and polyurethane resins, mold life is significantly ex€ 163,05 € 134,75 Excl. tax
CompareT51 B component for condensatie silicone
✔ 5% dosage
✔ dry, stretchy result
✔ Can be used neat or mixed
✔ Low shrinkage (< 0.3%)
✔ Better resistance to polyester
✔ Mixing ratio (Weight) 100:5€ 6,05 € 5,- Excl. tax
CompareELASTOSIL® C 1200 A/B
✔ Suitable for the production of reusable silicone vacuum bags.
✔ Fast curing at room temperature
✔ No chemical shrinkage
✔ Resistance to epoxy resins
✔ Resistance to polyester
✔ Two components 1:1
✔ blue / Transparent€ 453,66 € 374,93 Excl. tax
CompareChemlease Mold Cleaner EZ
Chemlease® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds.
€ 29,95 € 24,75 Excl. tax
Compare
