{"title":"All Silicones","description":"","products":[{"product_id":"siliconen-condensatie-20-voor-polyurethaan-en-epox","title":"Condensation Silicone 20 Resin – Molding Rubber for Polyurethane \u0026 Epoxy Casting","description":"\u003ch2\u003ePremium Condensation Silicone for Professional Applications\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eCondensation Silicone 20 Shore A\u003c\/strong\u003e is a medium-hardness tin-cure molding rubber, specially developed for making durable molds for polyurethane and epoxy casting. This liquid silicone combines excellent detail reproduction with high tensile strength, making it ideal for both prototyping and production work.\u003c\/p\u003e\n\u003ch3\u003e Key Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExcellent fluidity:\u003c\/strong\u003e Captures finest details and textures effortlessly\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHigh Tensile Strength:\u003c\/strong\u003e Durable molds that can withstand heavy use\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eMedium hardness (20 Shore A):\u003c\/strong\u003e Optimal balance between flexibility and stability\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCompatible with PU and epoxy:\u003c\/strong\u003e No inhibition when used with polyurethane and epoxy systems\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eReliable curing:\u003c\/strong\u003e Predictable processing time and consistent results\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCost-effective:\u003c\/strong\u003e Excellent value for professional use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Typical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Molds for polyurethane casting (PU foam, elastomers, hard resins)\u003c\/li\u003e\n\n\u003cli\u003e Epoxy and acrylic resin casting (Acrylic One, concrete look, decorative objects)\u003c\/li\u003e\n\n\u003cli\u003e Prototyping and production work in design and engineering\u003c\/li\u003e\n\n\u003cli\u003e Props and set construction for film, theatre and events\u003c\/li\u003e\n\n\u003cli\u003e Copying images and ornaments for artists and restorers\u003c\/li\u003e\n\n\u003cli\u003e Jewelry and small-scale reproduction in creative industries\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Technical Features\u003c\/h3\u003e\n\u003cp\u003e This condensation silicone is supplied as a two-component system that is easy to use at room temperature. Its medium hardness of 20 Shore A creates flexible molds that are easy to demould, while its high tensile strength allows for long-term use. Suitable for plaster, concrete, wax, polyurethane, and epoxy.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e Pot life (processing time) and demold time depend heavily on the mixing ratio and humidity. Adding more silicone B (hardener) or increasing humidity will shorten the pot life and demold time.\u003c\/p\u003e\n\u003ch3\u003e Ironing, Smearing or Spatula\u003c\/h3\u003e\n\u003cp\u003e For spreading, spatulating or smoothing silicone you can\u003cmeta charset=\"UTF-8\"\u003e \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-c\" rel=\"noopener\" target=\"_blank\"\u003eThixo C\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e(0.6%-2%, usually 1%)\u003c\/strong\u003e . This thickener makes it possible to spread the silicone. With this processing method, the mold must be provided with a support cap of\u003cmeta charset=\"UTF-8\"\u003e\u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/gips-gipsverband\" rel=\"noopener\" target=\"_blank\"\u003eplaster cast,\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/epoxy-steunkap.html\" rel=\"noopener\" target=\"_blank\"\u003eepoxy support cap,\u003c\/a\u003e \u003cspan\u003eor\u003c\/span\u003e \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/acryl-hars-set\" rel=\"noopener\" target=\"_blank\"\u003eacrylic resin\u003c\/a\u003e \u003cspan\u003ewith\u003c\/span\u003e \u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/a1-thixotrope-a.html\" rel=\"noopener\" target=\"_blank\"\u003ethickener\u003c\/a\u003e \u003cspan\u003eand\u003c\/span\u003e \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/triaxiaal-glasvezeldoek\" rel=\"noopener\" target=\"_blank\"\u003eglass fibre.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e Manufactured by \u003cstrong\u003eSilicones and More\u003c\/strong\u003e , specialists in high-quality moulding rubbers and casting materials for professional makers.\u003c\/p\u003e\n\u003ch3\u003e Professional Support\u003c\/h3\u003e\n\u003cp\u003e Questions about processing time, mixing ratios, or application possibilities? Our technical team is happy to advise you on the right material for your project.\u003c\/p\u003e","brand":"SAM - Silicones and More","offers":[{"title":"1 kg A component + 50 grams T21 B component","offer_id":49489535009109,"sku":"S11409","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"5 Kg A component + 250 grams T21 B component","offer_id":49489535041877,"sku":"S11410","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"20 Kg A component + 1 Kg T21 B component","offer_id":49489535074645,"sku":"S11411","price":344.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/sam-silicones-and-more-siliconen-condensatie-20-resin-vormrubber-v-48037913067861.jpg?v=1768917902"},{"product_id":"siliconen-condensatie-20-139580077","title":"Silicone Condensation 20 Universal Set – Molding rubber for universal molds","description":"\u003ch2\u003ePremium Condensation Silicone for Professional Mold Making\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eSilicone Condensation 20\u003c\/strong\u003e is a tin-cure silicone rubber with a Shore A 20 hardness, specially developed for creating flexible, detailed molds. This medium-hard condensation silicone combines excellent flow properties with high tensile strength, making it ideal for both simple and complex molding applications. Its reliable cure and durable flexibility make this silicone the preferred choice for professionals in plaster, concrete, and wax casting.\u003c\/p\u003e\n\u003ch3\u003e Key Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExcellent detail reproduction:\u003c\/strong\u003e Low viscosity ensures perfect reproduction of fine details and textures\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHigh Tensile Strength:\u003c\/strong\u003e Durable molds that withstand heavy use and repeated pouring\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eDimensionally stable flexibility:\u003c\/strong\u003e Shore A 20 hardness offers optimal balance between flexibility and dimensional stability\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eWide range of applications:\u003c\/strong\u003e Compatible with plaster, concrete, wax, soap and acrylic resin systems\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eReliable curing:\u003c\/strong\u003e Predictable processing time and consistent results at room temperature\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCost-effective:\u003c\/strong\u003e Excellent price-performance ratio for professional and semi-professional applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Typical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePlaster molds:\u003c\/strong\u003e Ornaments, architectural details and decorative elements in plaster and porcelain plaster\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eConcrete casting:\u003c\/strong\u003e Precast concrete parts, garden ornaments and wetcast applications\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCandle and soap molds:\u003c\/strong\u003e Flexible molds for complex shapes and undercuts\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eAcrylic Resin Casting:\u003c\/strong\u003e Molds for Jesmonite, Acrylic One, and Similar Water-Based Resin Systems\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eProps and set construction:\u003c\/strong\u003e Reproductions for theatre, film and events\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eArt Foundry:\u003c\/strong\u003e Lost-wax models and prototype development\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Technical Features\u003c\/h3\u003e\n\u003cp\u003e This condensation silicone is supplied as a two-component system with a simple 100:5 mixing ratio (base:catalyst). The pot life is approximately 30-45 minutes at 23°C, with full cure after 24 hours. The cured rubber exhibits minimal shrinkage and retains its flexibility over a wide temperature range. Suitable for open-mold casting and brush-on applications with thickener.\u003cbr\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e\n\u003ch3\u003e Ironing, Smearing or Spatula\u003c\/h3\u003e\n\u003cp\u003e For spreading, spatulating or smoothing silicone you can use \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-c\" target=\"_blank\"\u003eThixo C\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e(0.6%-2%, usually 1%)\u003c\/strong\u003e . This thickener makes the silicone easy to spread. With this processing method, the mold must be provided with a\u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/gips-gipsverband\" target=\"_blank\"\u003eplaster bandage support cap.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/nl\/epoxy-steunkap.html\" target=\"_blank\"\u003eepoxy support cap,\u003c\/a\u003e \u003cspan\u003eor\u003c\/span\u003e \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/acryl-hars-set\" target=\"_blank\"\u003eacrylic resin\u003c\/a\u003e \u003cspan\u003ewith\u003c\/span\u003e \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/nl\/a1-thixotrope-a.html\" target=\"_blank\"\u003ethickener\u003c\/a\u003e \u003cspan\u003eand\u003c\/span\u003e \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/triaxiaal-glasvezeldoek\" target=\"_blank\"\u003eglass fibre.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eSAM (Silicones and More)\u003c\/strong\u003e develops and supplies high-quality silicone elastomers and molding materials for professional makers, artists, and industrial applications.\u003c\/p\u003e\n\u003ch3\u003e Professional Support\u003c\/h3\u003e\n\u003cp\u003e Questions about processing time, mixing ratios, or material selection for your specific application? Our technical team is happy to advise you on the optimal silicone system and the right processing techniques for your project.\u003c\/p\u003e","brand":"SAM - Silicones and More","offers":[{"title":"0.5 Kg A component + 25 grams B component","offer_id":49489535107413,"sku":"S10056","price":14.95,"currency_code":"EUR","in_stock":true},{"title":"1 kg A component + 50 grams B component","offer_id":49489535140181,"sku":"S10050","price":24.95,"currency_code":"EUR","in_stock":true},{"title":"5 Kg A component + 250 grams B component","offer_id":49489535205717,"sku":"S82021","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"20 Kg A component + 1000 grams B component","offer_id":49489535238485,"sku":"S11703","price":344.95,"currency_code":"EUR","in_stock":true},{"title":"200 kg A component + 10 kg B component","offer_id":49489535304021,"sku":"S10470","price":3249.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/sam-silicones-and-more-siliconen-condensatie-20-universeel-set-vor-48037913133397.png?v=1768403072"},{"product_id":"elastosil-wacker-m4601","title":"Wacker ELASTOSIL® M 4601 A\/B – Pourable Addition Silicone for Molds \u0026 Reproduction","description":"\u003ch2\u003ePremium Pourable Addition-Cure Silicone for Professional Mold Making and Reproduction Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® M 4601 A\/B\u003c\/strong\u003e is a pourable, addition-curing two-component silicone rubber that cures at room temperature, featuring a Shore A hardness of 28, a reddish-brown final product, and exceptional resistance to common casting resins. With a pot life of 90 minutes and a curing time of 24 hours at 23°C, this product offers the process reliability professional mold makers require. The mixing ratio is 9:1 (A:B) by weight, with the platinum catalyst located in component B — important: use only components with the same batch number. ELASTOSIL® M 4601 A\/B is ideally suited for applications where shrink-free reproduction, high tear strength, and durable molds are essential.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTear Strength \u0026gt;30 N\/mm:\u003c\/strong\u003e exceptionally high resistance to tearing – molds with deep undercuts can be used multiple times without damage during demolding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElongation at Break 700%:\u003c\/strong\u003e maximum elasticity – complex geometries and fine details demold without deformation or residual stress in the mold.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLinear Shrinkage \u0026lt;0.1%:\u003c\/strong\u003e addition-curing without chemical shrinkage – dimensionally stable copies with micrometer-level reproduction accuracy.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot Life 90 minutes at 23°C:\u003c\/strong\u003e ample processing time – ideal for large molds and vacuum degassing beforehand without time pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA and BfR compliant for food contact:\u003c\/strong\u003e meets European (EC 1935\/2004, BfR XV) and American (FDA 21 CFR §177.2600) food contact standards – suitable for culinary molds and chocolate molds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcellent resistance to polyurethane:\u003c\/strong\u003e no adhesion issues or degradation with repeated use with PU, epoxy, and gypsum casting resins – no release agent required for well-sealed molds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProduction of precise casting molds for polyurethane, epoxy, and gypsum in art foundries and design studios\u003c\/li\u003e\n  \u003cli\u003eReproduction of sculptures, reliefs, and architectural ornaments in museum and restoration contexts\u003c\/li\u003e\n  \u003cli\u003eManufacturing of food contact molds for chocolate, sugar, and acoustic silicone products\u003c\/li\u003e\n  \u003cli\u003ePrototyping and series production in the automotive sector where dimensional accuracy is critical\u003c\/li\u003e\n  \u003cli\u003eComposite molding for fiber-reinforced materials with complex undercuts\u003c\/li\u003e\n  \u003cli\u003eArtificial stone and decorative concrete casting where repeated molds are required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003eStir component A (white, viscosity 15,000 mPa·s) thoroughly before use. Component B (reddish-brown, 800 mPa·s) should also be mixed well.\u003c\/li\u003e\n  \u003cli\u003eWeigh the components accurately in a ratio of 9 parts A to 1 part B (by weight). Use only components with the same batch number — mixing different batches can lead to curing problems.\u003c\/li\u003e\n  \u003cli\u003eMix slowly and carefully in a figure-8 motion or with a slow-speed mixer to minimize air entrapment. Mix until a completely homogeneous, streak-free mass.\u003c\/li\u003e\n  \u003cli\u003eOptionally degas the mixture in a vacuum chamber for 5–10 minutes to remove residual air bubbles. This is recommended for fine reproduction details.\u003c\/li\u003e\n  \u003cli\u003ePour the mixture slowly and from a single point into the mold within the 90-minute pot life to prevent air entrapment.\u003c\/li\u003e\n  \u003cli\u003eAllow the silicone to cure for 24 hours at 23°C. Curing can be accelerated by applying heat. After full curing, the mold is ready for use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eManufactured by \u003cstrong\u003eWacker Chemie AG\u003c\/strong\u003e, global market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Warning: Inhibition with Addition-Cure Silicones\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-cure silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the materials you are using (gloves, spatulas, molds) contain these substances, perform a small test first. Inhibiting substances are found in latex gloves, some plasticines, condensation-cure silicones, 1-component silicone sealants, and certain 3D printing materials. If in doubt, apply a layer of polyvinyl alcohol (PVA) as a release layer.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\n\u003cp\u003eELASTOSIL® M 4601 A\/B is a proven choice for professional mold makers who require precisely reproducible results for high volumes and complex geometries. Contact us for technical datasheets, processing manuals, or product advice.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1 Kg Set","offer_id":49489537958229,"sku":"S10032","price":39.95,"currency_code":"EUR","in_stock":false},{"title":"5 Kg Set","offer_id":49489537990997,"sku":"S10356","price":199.0,"currency_code":"EUR","in_stock":false},{"title":"25 Kg Set","offer_id":49489538023765,"sku":"S11327","price":932.0,"currency_code":"EUR","in_stock":false},{"title":"Quotation for outside BeNeLux and Germany","offer_id":49489538056533,"sku":"S11347","price":8223.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4600-ab-fda-goedgekeurd-platinum-silicone-52722852364629.jpg?v=1773846332"},{"product_id":"siliconen-additie-kleurloos-50-hard","title":"Silicone Addition Colorless 50 – Hard Platinum Silicone for Concrete \u0026 Heavy Casting Materials","description":"\u003cul\u003e\n\n\u003cli\u003e\n\n\u003ch2\u003ePremium Hard Silicone for Professional Molds and Heavy-Duty Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilicone Addition Colorless 50\u003c\/strong\u003e is a 2-component, platinum-cure (addition-curing) casting silicone with Shore A 50 hardness, specifically developed for sturdy, flexible molds for concrete, cement, and other heavy casting materials. This high-quality silicone combines high mechanical strength (8 N\/mm² tensile strength) with minimal shrinkage (\u0026lt;0.1%) and good flow properties, ideal for durable molds that can handle high-density materials. Easy 1:1 mixing ratio and adjustable hardness by mixing with Shore A 5 variant.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eShore A 50 hardness:\u003c\/strong\u003e Relatively hard, sturdy molds with excellent dimensional stability for heavy casting materials\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eHigh mechanical strength:\u003c\/strong\u003e 8 N\/mm² tensile strength and 14 N\/mm tear strength for durable molds that can withstand high pressure\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eSuitable for high-density materials:\u003c\/strong\u003e Ideal for concrete, cement, and other heavy casting materials without deformation\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003ePlatinum-cure technology:\u003c\/strong\u003e Minimal shrinkage (\u0026lt;0.1%), no inhibition with most substrates, long pot life\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eGood flow and self-deaerating:\u003c\/strong\u003e 13,000 mPa·s viscosity for good detail reproduction without vacuum treatment\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eAdjustable hardness:\u003c\/strong\u003e Mixable with Silicone Addition Colorless 5 for any desired hardness between Shore A 5-50\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eConcrete molds for precast elements, WetCast, and decorative concrete applications\u003c\/li\u003e\n\n\u003cli\u003eCement and plaster molds for architectural ornaments and restoration\u003c\/li\u003e\n\n\u003cli\u003eCandle molds for large, heavy candles and decorative wax objects\u003c\/li\u003e\n\n\u003cli\u003ePad printing stamps and flexible printing applications where hardness is required\u003c\/li\u003e\n\n\u003cli\u003eIndustrial molds for heavy casting materials and high-pressure applications\u003c\/li\u003e\n\n\u003cli\u003eProps and design objects where strength and flexibility are combined\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\n\u003cli\u003eMix components A and B thoroughly in a 100:100 ratio (1:1 by weight) manually or mechanically\u003c\/li\u003e\n\n\u003cli\u003eStir slowly in a figure-8 motion to prevent air entrapment\u003c\/li\u003e\n\n\u003cli\u003eProcess the mixture within the 30-minute pot life\u003c\/li\u003e\n\n\u003cli\u003eWait for complete curing before demolding (3-6 hours at 20°C)\u003c\/li\u003e\n\n\u003cli\u003eCuring can be accelerated by heating - every 10°C temperature increase roughly halves the time\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eAdjust hardness:\u003c\/strong\u003e Mix with \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-additie-kleurloos-5\" target=\"_blank\"\u003eSilicone Addition Colorless 5\u003c\/a\u003e for any desired hardness between Shore A 5-50. Example: for Shore A 18.5, mix 70% Shore 5 (35g A + 35g B) with 30% Shore 50 (15g A + 15g B)\u003c\/li\u003e\n\n\u003cli\u003e\u003cimg src=\"https:\/\/static.webshopapp.com\/shops\/100888\/files\/142517117\/grafiek-5-50-nl.jpg\" width=\"594\" height=\"334\"\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eReduce hardness:\u003c\/strong\u003e Add silicone oil (note: migrates to the surface over time)\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eThicken for troweling:\u003c\/strong\u003e Add \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-a\" target=\"_blank\"\u003eSilicone Thixo A\u003c\/a\u003e or \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/vulstof-fumed-silica\" target=\"_blank\"\u003efumed silica\u003c\/a\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eColoring:\u003c\/strong\u003e Use \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-kleurstof\" target=\"_blank\"\u003esilicone dye\u003c\/a\u003e for intense colors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilicones and More\u003c\/strong\u003e supplies high-quality silicones for professional mold making, concrete molds, WetCast, and industrial applications.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Warning: Inhibition with Addition-Cure Silicones\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-cure silicone (platinum-cure). These silicones can be poisoned by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you are using (including gloves, spatulas, and cups) contain these ingredients, please perform a small test first. These substances are found in many latex gloves, some plastilines, paints and glues, condensation-cure silicones, 1-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography). If you still wish to use these, you will need to apply a protective layer of \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\"\u003epolyvinyl alcohol (PVA)\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\n\u003cp\u003eOur technical specialists advise on material selection, hardness adjustments, processing techniques, and optimal results for your specific concrete or heavy casting material application. Contact us for technical datasheets, processing guidelines, or advice on inhibition prevention for addition-cure silicones.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49489538842965,"sku":"S10168","price":28.95,"currency_code":"EUR","in_stock":true},{"title":"2 kg set","offer_id":49489538875733,"sku":"S10167","price":53.75,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49489538908501,"sku":"S10166","price":262.0,"currency_code":"EUR","in_stock":true},{"title":"50 kg set","offer_id":49489539006805,"sku":"S10169","price":1196.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-additie-kleurloos-50-harde-platinum-silicon-48037917524309.jpg?v=1772190384"},{"product_id":"wacker-elastosil-vario-15-catalyst-vario","title":"Wacker Elastosil Vario 15 Normal – Translucent Platinum Silicone for Molds \u0026 Prototyping","description":"\u003ch2\u003ePremium Translucent Silicone for Professional Molds\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eWacker Elastosil Vario 15 Normal\u003c\/strong\u003e is a two-component, platinum-cure (addition-crosslinking) casting silicone with translucent, colorless properties and a Shore A 15 softness rating. This high-performance silicone combines very low viscosity (5,000 mPa·s) with minimal shrinkage and excellent mechanical properties, specifically developed for dimensionally accurate copies and reproduction molds. The Normal version (Hardener VARIO) offers a processing time of 150 minutes, ideal for larger projects. Food-safe according to BfR and FDA guidelines.\u003c\/p\u003e\n\u003ch3\u003e Key Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTranslucent and colorless:\u003c\/strong\u003e Molded objects remain visible for accurate positioning and precision cutting of reproduction molds\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVery low viscosity:\u003c\/strong\u003e 3,000 mPa·s after mixing for excellent flow around components and self-venting properties\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eFlexible processing time:\u003c\/strong\u003e 150 minutes pot life with Hardener VARIO (Normal) or 2 minutes with Hardener VARIO F (Fast)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eShore A 15 softness:\u003c\/strong\u003e Very flexible and soft for easy demolding and delicate details\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExcellent mechanical properties:\u003c\/strong\u003e 6.5 N\/mm² tensile strength, 900% elongation, tear strength 15 N\/mm (ASTM D 624 B)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eShrink-free vulcanisation:\u003c\/strong\u003e No chemical shrinkage for dimensionally accurate reproduction\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eModular system:\u003c\/strong\u003e Can be mixed with Elastosil Vario 40 for any desired hardness between 15-40 Shore A\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eFood safe \u0026amp; BfR\/FDA compliant:\u003c\/strong\u003e Suitable for food contact and culinary applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Typical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Prototype manufacturing and rapid prototyping for dimensionally accurate copies\u003c\/li\u003e\n\n\u003cli\u003e Reproduction molds for cast resin, concrete, plaster and all common reproduction materials\u003c\/li\u003e\n\n\u003cli\u003e Food-safe molds for chocolate, sugar, fondant, and culinary creations\u003c\/li\u003e\n\n\u003cli\u003e SFX and prosthetics: molds for masks, facial applications and special effects\u003c\/li\u003e\n\n\u003cli\u003e Podiatry and medical simulation for anatomical models and training phantoms\u003c\/li\u003e\n\n\u003cli\u003e Molds for polyurethane, epoxy, polyester and acrylic resins (Jesmonite, A1)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Technical Features\u003c\/h3\u003e\n\u003cp\u003e Elastosil Vario 15 Normal is supplied as a two-component system with a mixing ratio of 10:1 (base:hardener by weight). The Normal B component (Hardener VARIO) has a pot life of 150 minutes at 23°C and is demoldable after 6 hours at room temperature. For faster projects, Hardener VARIO F can be used (2-minute pot life, 15 minutes demoldable) or a mix of both hardeners for intermediate curing times. Hardness can be adjusted by mixing Vario 15 (Shore A 15) and Vario 40 (Shore A 40) base components—for example, a 50\/50 mix gives approximately Shore A 27.5. Full vulcanization: 24 hours at 23°C. Curing can be accelerated by heating. Density: 1.06 g\/cm³. Coloring can be done with 1-4% Elastosil Color Paste FL. Note: The total hardening component must always be 10% of the base component by weight.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for professional mold making, prototyping, and industrial applications, with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003e Important Warning: Inhibition with Addition-Cure Silicones\u003c\/h3\u003e\n\u003cp\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e This is an addition silicone (addition cross-linking\/platinum cure). These silicones can be poisoned by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you use (including gloves, spatulas, and cups) contain these ingredients, perform a small test first. These substances are found in many latex gloves, some plastilines, paints and adhesives, condensation silicones, one-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography). If you do want to use it, you will need to apply a protective layer of polyvinyl alcohol (PVA).\u003c\/p\u003e\n\u003cdiv style=\"background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;\"\u003e\n\u003ch3 style=\"color: #856404; margin-top: 0;\"\u003e⚠️ What the compliance statements do and do not say\u003c\/h3\u003e\n\u003cp\u003eWacker states compliance for this product for \u003cstrong\u003efood contact\u003c\/strong\u003e: EC 1935\/2004, BfR XV Silicones (volatiles max 0.5 %, extractables max 0.5 %) and FDA 21 CFR 175.300 and 177.2600. Wacker further declares that phthalates, bisphenols, PVC, PFAS, SCCP, heavy metals, latex and fragrances, among others, are not intentionally introduced, that the product is not of animal or human origin, is not derived from GMOs and does not undergo irradiation, and that the substances listed in the toy standards EN 71-3 and EN 71-9 and in CPSIA are not intentionally introduced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not a statement about skin contact or biocompatibility.\u003c\/strong\u003e We do not use the term skin-friendly as a certification, because no such certification exists at raw material level. Wacker itself notes that regulatory sanctioning of the ingredients does not imply the finished product is considered safe, and that responsibility for the finished article and for migration, extraction and volatile testing rests with its manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote for body-contact applications:\u003c\/strong\u003e the WACKER SILICONES HEALTH CARE POLICY generally does not permit use in contact with the genital mucosa, generally excludes applications of more than 30 days, and assesses contraceptive and reproductive devices case by case. If you are working on such a product, contact us before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003e Professional Support\u003c\/h3\u003e\n\u003cp\u003e Our technical specialists advise on material selection, processing techniques, hardener selection, hardness adjustments, and optimal results for your specific reproduction molding application. Contact us for technical data sheets, processing guidelines, or advice on inhibition prevention with addition silicones.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"0:55 Kg Set","offer_id":49489539826005,"sku":"S10722","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"1.1 Kg Set","offer_id":49489539858773,"sku":"S10098","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5.5 Kg Set","offer_id":49489539891541,"sku":"S11353","price":174.95,"currency_code":"EUR","in_stock":true},{"title":"22 Kg Set","offer_id":49489539924309,"sku":"S10995","price":659.0,"currency_code":"EUR","in_stock":true},{"title":"220 Kg. Kit","offer_id":49489539957077,"sku":"S11357","price":6255.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-vario-15-normaal-translucente-platinum-sil-49320249852245.png?v=1777972001"},{"product_id":"siliconen-additie-yellow-25","title":"Silicone Addition Yellow 25 Set – Soft Addition Mold Rubber for Molds \u0026 Prototypes","description":"\u003ch2\u003ePremium Soft Addition Mold Rubber for Professional Mold and Prototype Applications\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSilicone Addition Yellow 25\u003c\/strong\u003e is a pourable, addition-curing (platinum) RTV-2 mold rubber that cures at room temperature. Thanks to added silicone oil, this rubber is softer and more free-flowing than our Green 30: the hardness is Shore A 22 and the viscosity 6,000 mPa·s. The components are mixed 1:1 by weight. The pot life is 60 minutes, the mold can be demolded after 6 hours at 20 °C and reaches full strength after 1 day. The yellow rubber has a tensile strength of 3.9 N\/mm² and is suitable for molds with undercuts and for casting epoxy, polyurethane and polyester.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHardness Shore A 22\u003c\/strong\u003e – soft rubber from which models with undercuts are easy to demold.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eViscosity 6,000 mPa·s\u003c\/strong\u003e – flows easily around fine details and degasses well.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTensile strength 3.9 N\/mm²\u003c\/strong\u003e – sufficient strength for repeated demolding.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMixing ratio 1:1 by weight\u003c\/strong\u003e – easy to weigh and process.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePot life 60 minutes\u003c\/strong\u003e – ample time to pour and degas carefully.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFull strength after 1 day\u003c\/strong\u003e – quickly ready for the first casts.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eMolds of models with undercuts.\u003c\/li\u003e\u003cli\u003eMolds for casting resins such as epoxy, polyurethane and polyester.\u003c\/li\u003e\u003cli\u003eSoft, flexible molds for fine details.\u003c\/li\u003e\u003cli\u003ePrototypes and decorative pieces.\u003c\/li\u003e\u003cli\u003eMolds for ornaments and jewelry.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\u003col\u003e\u003cli\u003eStir component A and component B separately and thoroughly first.\u003c\/li\u003e\u003cli\u003eWeigh A and B in a 1:1 ratio by weight. Only use components with the same lot number.\u003c\/li\u003e\u003cli\u003eMix slowly and carefully in a figure-8 motion, without whipping in air.\u003c\/li\u003e\u003cli\u003ePreferably degas the mixture in a vacuum chamber immediately after mixing.\u003c\/li\u003e\u003cli\u003ePour within the 60-minute pot life.\u003c\/li\u003e\u003cli\u003eAllow the mold to cure for at least 6 hours at room temperature. A slight temperature increase speeds up curing; air bubbles then have less time to escape.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eIf you want to apply the rubber with a spatula instead of pouring it, add \u003ca href=\"\/en\/products\/thixo-a\"\u003eSilicone Thixo A\u003c\/a\u003e (not Thixo C).\u003c\/p\u003e\u003ch3\u003eGood to Know: Silicone Oil\u003c\/h3\u003e\u003cp\u003eThis mold rubber contains silicone oil. It does not crosslink and can bleed out slightly over time, which may cause a greasy layer on the mold surface and slight shrinkage. Clean cast parts thoroughly before painting or bonding them.\u003c\/p\u003e\u003ch3\u003eImportant Warning: Inhibition of Addition Silicones\u003c\/h3\u003e\u003cp\u003eThis is an addition-curing silicone (platinum cure). Curing can be disrupted by sulfur, nitrogen, amine compounds and metal salts. These substances are found in, among others, latex gloves, some modelling clays, paints and adhesives, condensation silicones, 1-component silicone sealant, natural rubber and certain 3D printing materials. If in doubt, run a small test first or apply a separating layer of polyvinyl alcohol.\u003c\/p\u003e\u003cp\u003eSilicones and More, specialist in high-quality mold rubbers and casting materials for professional makers.\u003c\/p\u003e\u003ch3\u003eProfessional Support\u003c\/h3\u003e\u003cp\u003eNeed a firmer mold with higher tear strength and no oil? Take a look at \u003ca href=\"\/en\/products\/silicone-addition-green-30-set\"\u003eSilicone Addition Green 30\u003c\/a\u003e. Unsure which mold rubber best suits your application? Contact us at info@siliconesandmore.com, we are happy to help.\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 Kg Set","offer_id":49489540022613,"sku":"S10220","price":32.95,"currency_code":"EUR","in_stock":true},{"title":"2 Kg Set","offer_id":49489540055381,"sku":"S10221","price":59.95,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49489540088149,"sku":"S10222","price":274.95,"currency_code":"EUR","in_stock":false},{"title":"40 kg set","offer_id":49489540120917,"sku":"S10223","price":1099.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-additie-yellow-25-set-middelharde-additie-v-48037921390933.png?v=1781251586"},{"product_id":"siliconen-additie-pink-10","title":"Wacker CENUSIL® M 810 A\/B “Pink 10” – Soft Addition-Cure Mould-Making Rubber for Candle Moulds \u0026 Soap Moulds","description":"\u003ch2\u003ePremium Soft Addition-Cure Mould-Making Rubber for Professional Candle and Soap Mould Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker CENUSIL® M 810 A\/B (“Pink 10”)\u003c\/strong\u003e is a pourable, addition-cure (platinum-cure) RTV-2 mould-making silicone rubber that vulcanises shrink-free at room temperature. The two-component product is mixed 1:1 by weight, is free-flowing with excellent self-deaeration and reaches a soft hardness of Shore A 10. The pink final colour (we colour the A component pink) makes visual mixing control easy. With approximately 40 minutes pot life and a tack-free cure time of 4 hours, the material is suited to moulds where a long service life and a high number of castings are desired, with good resistance to more aggressive reproduction materials such as epoxy, polyurethane and polyester.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSoft Shore A 10 – \u003c\/strong\u003eextremely supple rubber that demoulds fragile objects such as candles and soaps without damage.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFree-flowing (3,000 mPa·s mixed) – \u003c\/strong\u003eflows easily around fine detail and largely self-deaerates.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShrink-free (\u0026lt; 0.1 % shrinkage) – \u003c\/strong\u003eaddition cure without chemical shrinkage for dimensionally accurate castings.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh tear propagation resistance (15 N\/mm) – \u003c\/strong\u003ewithstands repeated demoulding of models with undercuts.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh tensile strength (3.5 N\/mm²) and elongation at break (600 %) – \u003c\/strong\u003estrong and stretchable rubber with long mould life.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e40 minutes pot life – \u003c\/strong\u003eample working time for careful pouring and deaeration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCandle moulds for wax and paraffin\u003c\/li\u003e\n\u003cli\u003eSoap moulds and cast soap\u003c\/li\u003e\n\u003cli\u003eReproduction moulds for plaster and concrete stucco\u003c\/li\u003e\n\u003cli\u003eMoulds for epoxy, polyurethane and polyester casting resins\u003c\/li\u003e\n\u003cli\u003eGlove moulds and one-piece skin moulds with strong undercuts\u003c\/li\u003e\n\u003cli\u003eModel making, ornaments and design prototypes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFirst stir component A and component B separately and thoroughly.\u003c\/li\u003e\n\u003cli\u003eMix A and B by weight in a 1:1 ratio (100:100). Use only A and B components with the same batch number.\u003c\/li\u003e\n\u003cli\u003eMix slowly and carefully in a figure-8 motion to limit air entrapment.\u003c\/li\u003e\n\u003cli\u003ePreferably vacuum-degas the mixture immediately after mixing to remove air bubbles.\u003c\/li\u003e\n\u003cli\u003ePour within the pot life of approximately 40 minutes.\u003c\/li\u003e\n\u003cli\u003eAllow to cure for approximately 4 hours at room temperature. A slight increase in temperature accelerates curing; note that air bubbles then have less time to escape.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you wish to lower the hardness, you can add \u003ca href=\"https:\/\/www.siliconesandmore.com\/collections\/siliconen-olie-polydimethylsiloxanen-olie\" target=\"_blank\" rel=\"noopener\"\u003esilicone oil\u003c\/a\u003e. The disadvantage of oil is that it does not cross-link and can sweat out over time (years), causing a greasy layer and shrinkage. If you wish to apply the silicone with a spatula instead of pouring, add \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-a\" target=\"_blank\" rel=\"noopener\"\u003eSilicone Thixo A\u003c\/a\u003e (note: not Silicone Thixo C).\u003c\/p\u003e\n\u003cdiv style=\"background:#fff3cd;border:2px solid #ffc107;color:#856404;padding:15px;border-radius:8px;margin:20px 0\"\u003e\n\u003cstrong\u003e⚠️ Caution: inhibition with addition-cure silicones\u003c\/strong\u003e\u003cbr\u003eThese addition-cure silicones can be poisoned (inhibited) by sulphur, nitrogen, amino compounds and metal salts, causing the cure to fail. These substances occur among others in many latex gloves, some plasticines, paints and adhesives, condensation silicones, 1-component silicone sealant, natural rubbers and 3D-printing material (especially stereolithography). If you are unsure whether your materials (including gloves, spatulas and cups) contain these substances, first carry out a small test or apply a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e.\u003c\/div\u003e\n\u003cp\u003eFor larger pack sizes, please contact us via the website. Also available in white.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003cbr\u003eStored cool, frost-free and in closed packaging, the shelf life is at least 1 year.\u003c\/p\u003e\n\u003cp\u003eWacker Chemie AG is a world market leader in the development and production of silicones for industrial and technical applications. Do you have questions about the right choice or processing of CENUSIL® M 810 A\/B (“Pink 10”)? Please feel free to contact us; we are glad to think along with your project.\u003c\/p\u003e","brand":"Wacker Chemie AG","offers":[{"title":"1 Kg Set","offer_id":49489540153685,"sku":"S10069","price":36.25,"currency_code":"EUR","in_stock":true},{"title":"2 Kg Set","offer_id":49489540186453,"sku":"S10068","price":70.75,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49489540219221,"sku":"S10067","price":327.0,"currency_code":"EUR","in_stock":false},{"title":"40 kg set","offer_id":49489540251989,"sku":"S10066","price":1207.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-chemie-ag-wacker-cenusil-m-810-ab-pink-10-zachte-additie-48037921128789.jpg?v=1780905909"},{"product_id":"wacker-elastosil-vario-40-catalyst-vario-normaal","title":"Wacker ELASTOSIL® VARIO 40 Normal – Transparent Platinum Silicone for Molds \u0026 Prototyping","description":"\u003ch2\u003ePremium Transparent Platinum Silicone for Professional Mold and Prototyping Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® VARIO 40 Normal\u003c\/strong\u003e is a 2-component, addition-curing (platinum-cure) pourable silicone with Shore A 40 hardness and fully transparent color, specially developed for molds where visibility of the cast object is essential. The \u003cem\u003eNormal\u003c\/em\u003e variant offers a pot life of 60 minutes and a demolding time of 6 hours at 20°C – ideal for careful processing of complex molds without time pressure. This professional silicone combines excellent flowability (10,000 mPa·s), high tensile strength (8 N\/mm²), food safety, and broad chemical resistance with unique adaptability via the VARIO system. Mixing ratio 10:1 (A:B).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully transparent:\u003c\/strong\u003e The cast object remains visible in the mold for precise and correctly positioned cutting – ideal for prototyping and complex geometries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 minutes pot life (Normal):\u003c\/strong\u003e Ample processing time for careful pouring, degassing, and positioning of complex molds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable hardness via VARIO system:\u003c\/strong\u003e Mix VARIO 15 and VARIO 40 A-components for any desired Shore A hardness between 15 and 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable curing speed:\u003c\/strong\u003e Combine Normal and Fast B-component for any desired curing time – total B always 10% of A-weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood-contact compliant:\u003c\/strong\u003e Platinum-cure technology without by-products, compliant with BfR XV and FDA 21 CFR 177.2600, suitable for culinary molds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical strength:\u003c\/strong\u003e 8 N\/mm² tensile strength and 15 N\/mm tear strength for durable, long-lasting molds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrototyping and rapid tooling: transparent molds for precise cutting of complex models\u003c\/li\u003e\n\u003cli\u003eCulinary molds for chocolate, confectionery, and food-safe applications (FDA compliant)\u003c\/li\u003e\n\u003cli\u003eStamps and pad printing industry: high detail reproduction and chemical resistance\u003c\/li\u003e\n\u003cli\u003ePodiatry and medical simulation: molds and anatomical models\u003c\/li\u003e\n\u003cli\u003eMolds for polyurethane, polyester, epoxy, and acrylic resin\u003c\/li\u003e\n\u003cli\u003eRobotics, animatronics and set building: flexible silicone objects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix A and B components in a 10:1 ratio by weight\u003c\/li\u003e\n\u003cli\u003eMix slowly in a figure-8 motion to minimize air entrapment\u003c\/li\u003e\n\u003cli\u003eOptional: vacuum immediately after mixing to remove air bubbles\u003c\/li\u003e\n\u003cli\u003ePour within 60 minutes pot life\u003c\/li\u003e\n\u003cli\u003eAllow 6 hours to cure at 20°C (or accelerated in an oven)\u003c\/li\u003e\n\u003cli\u003eRecommended: post-bake at 100°C for 2-3 hours for complete outgassing\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"silicone-mengcalculator\" style=\"max-width: 100%; margin: 30px 0; padding: 20px; background: #f8f9fa; border: 3px solid #0a4a8a; border-radius: 12px; box-shadow: 0 4px 15px rgba(10,74,138,0.12); font-family: inherit;\"\u003e\n\u003cdiv style=\"display: flex; align-items: center; gap: 12px; margin-bottom: 16px; flex-wrap: wrap;\"\u003e\n\u003cdiv style=\"background: #0a4a8a; color: white; padding: 8px 16px; border-radius: 9999px; font-weight: bold; font-size: 1.05rem; white-space: nowrap;\"\u003e🧪 EL ASTOSIL VARIO MIX\u003c\/div\u003e\n\u003ch2 style=\"margin: 0; font-size: 1.55rem; color: #0a4a8a; flex: 1;\"\u003eMixing Calculator for Your Perfect Silicone\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #333; line-height: 1.4; margin-bottom: 20px; max-width: 680px; font-size: 0.98rem;\"\u003eCalculate exactly how much \u003cstrong\u003eElastosil Vario 15\u003c\/strong\u003e, \u003cstrong\u003eVario 40\u003c\/strong\u003e, \u003cstrong\u003eCatalyst Vario F (fast)\u003c\/strong\u003e and \u003cstrong\u003eNormal\u003c\/strong\u003e you need.\u003cbr\u003e\u003csmall style=\"color: #e74c3c;\"\u003eAll values at 20 °C. Temperature has a big influence!\u003c\/small\u003e\u003c\/p\u003e\n\u003c!-- Hoofd-layout: 2 kolommen --\u003e\n\u003cdiv style=\"display: flex; gap: 20px; align-items: flex-start;\"\u003e\n\u003c!-- Kolom 1: 3 inputcellen onder elkaar --\u003e\n\u003cdiv style=\"flex: 1; display: flex; flex-direction: column; gap: 12px;\"\u003e\n\u003c!-- CEL 1: Hardheid --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e1. Desired hardness (Shore A)\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n\u003cinput type=\"number\" id=\"shoreInput\" value=\"40\" min=\"15\" max=\"40\" step=\"0.1\" style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eShore A\u003c\/span\u003e\n\u003c\/div\u003e\n\u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003e15 = very soft • 40 = firm\u003c\/small\u003e\n\u003c\/div\u003e\n\u003c!-- CEL 2: Verwerkingstijd (potlife) --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e2. Desired pot life\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n\u003cinput type=\"number\" id=\"potlifeInput\" value=\"150\" min=\"3\" max=\"150\" step=\"1\" style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eminutes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- CEL 3: Alleen totale gewenste mengwaarde (A + B) – uithardtijd-output verwijderd --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e3. Total desired mix amount (A + B in grams)\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\u003cinput type=\"number\" id=\"totalMix\" value=\"1100\" min=\"110\" step=\"50\" style=\"width: 220px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e\u003c\/div\u003e\n\u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003eB-component = always 10% of A-component\u003c\/small\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Kolom 2: Jouw perfecte menging (rechts) --\u003e\n\u003cdiv id=\"finalResult\" style=\"flex: 1; padding: 20px; background: #0a4a8a; color: white; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.1); min-height: 100%; display: none;\"\u003e\n\u003ch3 style=\"color: white; margin: 0 0 14px 0; font-size: 1.5 rem;\"\u003e✅ Your perfect mix\u003c\/h3\u003e\n\u003cdiv id=\"finalContent\" style=\"display: flex; flex-direction: column; gap: 14px; font-size: 1.3rem;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- DISCLAIMER --\u003e\n\u003cdiv style=\"margin-top: 24px; padding: 14px 20px; background: #fff3cd; border: 1px solid #ffeaa7; border-radius: 8px; color: #856404; font-size: 1.1rem; line-height: 1.45; text-align: center;\"\u003e\n\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e This calculator is merely a tool and provides an estimate based on the graph from the manual. Actual pot life and curing time may vary due to temperature, mixing technique, humidity, or other factors. Siliconesandmore accepts no liability for divergent results. Always perform a small test mix first and consult the official manual.\u003c\/div\u003e\n\u003cdiv style=\"margin-top: 18px; text-align: center; font-size: 0.9rem; color: #555;\"\u003eTip: Buy the kits separately if you want to adjust both hardness and speed.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\n  \/\/ ====================== DATA UIT GRAFIEK (Wacker TDS + jouw screenshot) ======================\n  \/\/ Waarden gecontroleerd aan de hand van de bijgevoegde grafiek:\n  \/\/ Potlife (blauwe lijn): 155 → 60 → 38 → 18 → 8 min\n  \/\/ Curing time (rode lijn): 6.0 → 3.0 → 1.8 → 1.0 → 0.25 uur\n  \/\/ 100% F = 15 min uitharding (0.25 uur) zoals in de grafiek. (Jouw eerdere opmerking over 3 min is niet terug te vinden in de grafiek; we houden ons aan de officiële Wacker-grafiek.)\n  const bMixData = [\n    { p: 0,   pot: 155, dem: 6.0 },\n    { p: 30,  pot:  60, dem: 3.0 },\n    { p: 50,  pot:  38, dem: 1.8 },\n    { p: 70,  pot:  18, dem: 1.0 },\n    { p: 100, pot:   8, dem: 0.25 }\n  ];\n\n  function getPercentFromTime(target, key) {\n    const data = bMixData;\n    if (target \u003e= data[0][key]) return 0;\n    if (target \u003c= data[data.length-1][key]) return 100;\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (target \u003c= data[i][key] \u0026\u0026 target \u003e= data[i+1][key]) {\n        const frac = (data[i][key] - target) \/ (data[i][key] - data[i+1][key]);\n        return data[i].p + frac * (data[i+1].p - data[i].p);\n      }\n    }\n    return 50;\n  }\n\n  function getTimeFromPercent(percent, key) {\n    const data = bMixData;\n    const p = Math.max(0, Math.min(100, percent));\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (p \u003e= data[i].p \u0026\u0026 p \u003c= data[i+1].p) {\n        const frac = (p - data[i].p) \/ (data[i+1].p - data[i].p);\n        return data[i][key] + frac * (data[i+1][key] - data[i][key]);\n      }\n    }\n    return p \u003c= 0 ? data[0][key] : data[data.length-1][key];\n  }\n\n  function updateCalculator() {\n    const totalMix = parseFloat(document.getElementById('totalMix').value) || 1100;\n    const totalA = Math.round(totalMix \/ 1.1);\n    const totalB = Math.round(totalMix - totalA);\n\n    const shore = parseFloat(document.getElementById('shoreInput').value) || 15;\n\n    const frac40 = (shore - 15) \/ 25;\n    const a15 = Math.round((1 - frac40) * totalA);\n    const a40 = Math.round(frac40 * totalA);\n\n    const potTarget = parseFloat(document.getElementById('potlifeInput').value) || 15;\n    const percentFast = getPercentFromTime(potTarget, 'pot');\n    const calculatedDem = getTimeFromPercent(percentFast, 'dem');\n\n    const bFast = Math.round((percentFast \/ 100) * totalB);\n    const bNormal = totalB - bFast;\n\n    const finalHTML = `\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eA-component (total ${totalA} g)\u003c\/strong\u003e\u003cbr\u003e\n        Vario 15: \u003cstrong\u003e${a15} g\u003c\/strong\u003e\u003cbr\u003e\n        Vario 40: \u003cstrong\u003e${a40} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eB-component (total ${totalB} g)\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Vario F: \u003cstrong\u003e${bFast} g\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Normal: \u003cstrong\u003e${bNormal} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eWorking times\u003c\/strong\u003e\u003cbr\u003e\n        Pot life: \u003cstrong\u003e${potTarget.toFixed(0)} min\u003c\/strong\u003e\u003cbr\u003e\n        Demold time: \u003cstrong\u003e${calculatedDem.toFixed(2)} hours\u003c\/strong\u003e\n      \u003c\/div\u003e\n    `;\n    document.getElementById('finalContent').innerHTML = finalHTML;\n    document.getElementById('finalResult').style.display = 'block';\n  }\n\n  function copyMix() {\n    const final = document.getElementById('finalContent').innerText;\n    navigator.clipboard.writeText(final).then(() =\u003e {\n      const btn = document.querySelector('#finalResult button');\n      if (btn) {\n        const orig = btn.innerHTML;\n        btn.innerHTML = '✅ Copied!';\n        setTimeout(() =\u003e { btn.innerHTML = orig; }, 2000);\n      }\n    });\n  }\n\n  function initCalculator() {\n    const elements = ['shoreInput', 'potlifeInput', 'totalMix'];\n    elements.forEach(id =\u003e {\n      const el = document.getElementById(id);\n      if (el) {\n        el.addEventListener('input', updateCalculator);\n        el.addEventListener('change', updateCalculator);\n      }\n    });\n    updateCalculator();\n  }\n\n  if (document.readyState === 'loading') {\n    document.addEventListener('DOMContentLoaded', initCalculator);\n  } else {\n    initCalculator();\n  }\n\u003c\/script\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for professional mold making, prototyping, and food-safe applications with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003eImportant Warning: Inhibition in Addition-Curing Silicones\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-curing (platinum-cure) silicone. These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you are using (including gloves, spatulas, and cups) contain these ingredients, please perform a small test first. These substances can be found in many latex gloves, some plastilines, paints and glues, condensation-curing silicones, 1-component silicone sealants, natural rubbers, and 3D printing material (especially stereolithography). If you wish to use these, you will need to apply a protective layer of polyvinyl alcohol (PVA).\u003c\/p\u003e\n\n\u003cdiv style=\"background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;\"\u003e\n\u003ch3 style=\"color: #856404; margin-top: 0;\"\u003e⚠️ What the compliance statements do and do not say\u003c\/h3\u003e\n\u003cp\u003eWacker states compliance for this product for \u003cstrong\u003efood contact\u003c\/strong\u003e: EC 1935\/2004, BfR XV Silicones (volatiles max 0.5 %, extractables max 0.5 %) and FDA 21 CFR 175.300 and 177.2600. Wacker further declares that phthalates, bisphenols, PVC, PFAS, SCCP, heavy metals, latex and fragrances, among others, are not intentionally introduced, that the product is not of animal or human origin, is not derived from GMOs and does not undergo irradiation, and that the substances listed in the toy standards EN 71-3 and EN 71-9 and in CPSIA are not intentionally introduced.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not a statement about skin contact or biocompatibility.\u003c\/strong\u003e We do not use the term skin-friendly as a certification, because no such certification exists at raw material level. Wacker itself notes that regulatory sanctioning of the ingredients does not imply the finished product is considered safe, and that responsibility for the finished article and for migration, extraction and volatile testing rests with its manufacturer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote for body-contact applications:\u003c\/strong\u003e the WACKER SILICONES HEALTH CARE POLICY generally does not permit use in contact with the genital mucosa, generally excludes applications of more than 30 days, and assesses contraceptive and reproductive devices case by case. If you are working on such a product, contact us before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on hardness mixing, curing speed, vacuum techniques, and optimal results for your specific mold, prototype, or stamp application. Contact us for technical datasheets, processing instructions, or advice on the VARIO system.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"0:55 Kg Set","offer_id":49489540317525,"sku":"S11310","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"1.1 Kg Set","offer_id":49489540350293,"sku":"S11307","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5.5 Kg Set","offer_id":49489540383061,"sku":"S82013","price":174.95,"currency_code":"EUR","in_stock":true},{"title":"22 Kg Set","offer_id":49489540415829,"sku":"S11311","price":659.0,"currency_code":"EUR","in_stock":true},{"title":"220 Kg. Kit","offer_id":49489540448597,"sku":"S82014","price":6255.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-vario-40-normaal-transparante-platinum-sil-49320249590101.png?v=1778659609"},{"product_id":"elastosil-vario-15-catalyst-vario-f","title":"Wacker Elastosil Vario 15 Fast – Fast Translucent Platinum Silicone for Prototyping \u0026 Molds","description":"\u003ch2\u003ePremium Fast Translucent Silicone for Professional Prototyping\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Elastosil Vario 15 Fast\u003c\/strong\u003e is a 2-component, platinum-cure (addition-curing) casting silicone with exceptional softness (Shore A 15) and very fast curing (15 minutes demoldable). This high-quality translucent silicone combines very low viscosity (5,000 mPa·s) with minimal shrinkage (\u003c0.1%) and excellent mechanical properties, specifically developed for rapid prototyping where visual control is essential. Food-contact compliant according to BfR and FDA guidelines. Easy 10:1 mixing ratio.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery fast curing:\u003c\/strong\u003e 2 minutes pot life, 15 minutes demoldable at 20°C for rapid production and short lead times\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranslucent for visual control:\u003c\/strong\u003e Cast objects remain visible for precise positioning and precision cutting during prototyping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 15 softness:\u003c\/strong\u003e Very flexible and soft for easy demolding and delicate details\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum-cure technology:\u003c\/strong\u003e Minimal shrinkage (\u003c0.1%), no inhibition with most substrates, food-contact compliant to BfR and FDA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery fluid and self-deaerating:\u003c\/strong\u003e 5,000 mPa·s viscosity for perfect detail reproduction without vacuum treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable properties:\u003c\/strong\u003e Hardness and speed adjustable by mixing with Vario 40 and\/or Normal catalyst - see mixing charts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRapid prototyping where visual control during mold cutting is essential\u003c\/li\u003e\n\u003cli\u003eFood-safe molds for chocolate, confectionery, fondant, and culinary creations (after post-curing)\u003c\/li\u003e\n\u003cli\u003eSFX and prosthetics: molds for masks, facial applications, and special effects\u003c\/li\u003e\n\u003cli\u003ePodiatry applications and medical models where softness and speed are required\u003c\/li\u003e\n\u003cli\u003ePad printing pads and flexible printing applications in the graphic industry\u003c\/li\u003e\n\u003cli\u003eMolds for polyurethane, epoxy, polyester, and acrylic resins where transparency is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCarefully mix component A and B in a 10:1 ratio (by weight) manually or mechanically\u003c\/li\u003e\n\u003cli\u003eStir slowly in a figure-8 motion to prevent air entrapment\u003c\/li\u003e\n\u003cli\u003eProcess the mixture within the 2-minute pot life\u003c\/li\u003e\n\u003cli\u003eWait to demold until fully cured (15 minutes at 20°C)\u003c\/li\u003e\n\u003cli\u003eFor food-safe applications: post-cure for 2-3 hours at 100-140°C to fully outgas\u003c\/li\u003e\n\u003cli\u003eCuring can be accelerated by heating - note: air bubbles have less time to escape\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"max-width: 100%; margin: 30px 0; padding: 20px; background: #f8f9fa; border: 3px solid #0a4a8a; border-radius: 12px; box-shadow: 0 4px 15px rgba(10,74,138,0.12); font-family: inherit;\" class=\"silicone-mengcalculator\"\u003e\n  \u003cdiv style=\"display: flex; align-items: center; gap: 12px; margin-bottom: 16px; flex-wrap: wrap;\"\u003e\n    \u003cdiv style=\"background: #0a4a8a; color: white; padding: 8px 16px; border-radius: 9999px; font-weight: bold; font-size: 1.05rem; white-space: nowrap;\"\u003e🧪 EL ASTOSIL VARIO MIX\u003c\/div\u003e\n    \u003ch2 style=\"margin: 0; font-size: 1.55rem; color: #0a4a8a; flex: 1;\"\u003eMixing Calculator for Your Perfect Silicone\u003c\/h2\u003e\n  \u003c\/div\u003e\n  \u003cp style=\"color: #333; line-height: 1.4; margin-bottom: 20px; max-width: 680px; font-size: 0.98rem;\"\u003eCalculate exactly how much \u003cstrong\u003eElastosil Vario 15\u003c\/strong\u003e, \u003cstrong\u003eVario 40\u003c\/strong\u003e, \u003cstrong\u003eCatalyst Vario F (fast)\u003c\/strong\u003e and \u003cstrong\u003eNormal\u003c\/strong\u003e you need.\u003cbr\u003e\u003csmall style=\"color: #e74c3c;\"\u003eAll values at 20 °C. Temperature has a big influence!\u003c\/small\u003e\u003c\/p\u003e\n\n  \u003c!-- Main layout: 2 columns --\u003e\n  \u003cdiv style=\"display: flex; gap: 20px; align-items: flex-start;\"\u003e\n    \u003c!-- Column 1: 3 input cells stacked --\u003e\n    \u003cdiv style=\"flex: 1; display: flex; flex-direction: column; gap: 12px;\"\u003e\n\n      \u003c!-- CELL 1: Hardness --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e1. Desired hardness (Shore A)\u003c\/h3\u003e\n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"0.1\" max=\"40\" min=\"15\" value=\"15\" id=\"shoreInput\" type=\"number\"\u003e \n          \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eShore A\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003e15 = very soft • 40 = firm\u003c\/small\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CELL 2: Pot life --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e2. Desired processing time (pot life)\u003c\/h3\u003e\n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"1\" max=\"150\" min=\"3\" value=\"3\" id=\"potlifeInput\" type=\"number\"\u003e \n          \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eminutes\u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CELL 3: Only total desired mix value (A + B) – curing time output removed --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e3. Total desired mix value (A + B in grams)\u003c\/h3\u003e\n        \n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 220px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"50\" min=\"110\" value=\"1100\" id=\"totalMix\" type=\"number\"\u003e\n        \u003c\/div\u003e\n        \u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003eB-component = always 10% of A-component\u003c\/small\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n\n    \u003c!-- Column 2: Your perfect mix (right) --\u003e\n    \u003cdiv style=\"flex: 1; padding: 20px; background: #0a4a8a; color: white; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.1); min-height: 100%; display: none;\" id=\"finalResult\"\u003e\n      \u003ch3 style=\"color: white; margin: 0 0 14px 0; font-size: 1.5 rem;\"\u003e✅ Your perfect mix\u003c\/h3\u003e\n      \u003cdiv style=\"display: flex; flex-direction: column; gap: 14px; font-size:1.3rem;\" id=\"finalContent\"\u003e\u003c\/div\u003e\n      \n\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- DISCLAIMER --\u003e\n  \u003cdiv style=\"margin-top: 24px; padding: 14px 20px; background: #fff3cd; border: 1px solid #ffeaa7; border-radius: 8px; color: #856404; font-size: 1.1rem; line-height: 1.45; text-align: center;\"\u003e\n    \u003cstrong\u003eDisclaimer:\u003c\/strong\u003e This calculator is merely a tool and provides an estimate based on the graph from the manual. Actual processing time and curing time may vary due to temperature, mixing technique, humidity, or other factors. Siliconesandmore accepts no liability for differing results. Always perform a small test mix first and consult the official manual.\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"margin-top: 18px; text-align: center; font-size: 0.9rem; color: #555;\"\u003eTip: Purchase the kits separately if you want to adjust both hardness and speed.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\n  \/\/ ====================== DATA FROM GRAPH (Wacker TDS + your screenshot) ======================\n  \/\/ Values checked against the attached graph:\n  \/\/ Potlife (blue line): 155 → 60 → 38 → 18 → 8 min\n  \/\/ Curing time (red line): 6.0 → 3.0 → 1.8 → 1.0 → 0.25 hours\n  \/\/ 100% F = 15 min curing (0.25 hours) as in the graph. (Your earlier note about 3 min is not found in the graph; we adhere to the official Wacker graph.)\n  const bMixData = [\n    { p: 0,   pot: 155, dem: 6.0 },\n    { p: 30,  pot:  60, dem: 3.0 },\n    { p: 50,  pot:  38, dem: 1.8 },\n    { p: 70,  pot:  18, dem: 1.0 },\n    { p: 100, pot:   8, dem: 0.25 }\n  ];\n\n  function getPercentFromTime(target, key) {\n    const data = bMixData;\n    if (target \u003e= data[0][key]) return 0;\n    if (target \u003c= data[data.length-1][key]) return 100;\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (target \u003c= data[i][key] \u0026\u0026 target \u003e= data[i+1][key]) {\n        const frac = (data[i][key] - target) \/ (data[i][key] - data[i+1][key]);\n        return data[i].p + frac * (data[i+1].p - data[i].p);\n      }\n    }\n    return 50;\n  }\n\n  function getTimeFromPercent(percent, key) {\n    const data = bMixData;\n    const p = Math.max(0, Math.min(100, percent));\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (p \u003e= data[i].p \u0026\u0026 p \u003c= data[i+1].p) {\n        const frac = (p - data[i].p) \/ (data[i+1].p - data[i].p);\n        return data[i][key] + frac * (data[i+1][key] - data[i][key]);\n      }\n    }\n    return p \u003c= 0 ? data[0][key] : data[data.length-1][key];\n  }\n\n  function updateCalculator() {\n    const totalMix = parseFloat(document.getElementById('totalMix').value) || 1100;\n    const totalA = Math.round(totalMix \/ 1.1);\n    const totalB = Math.round(totalMix - totalA);\n\n    const shore = parseFloat(document.getElementById('shoreInput').value) || 15;\n\n    const frac40 = (shore - 15) \/ 25;\n    const a15 = Math.round((1 - frac40) * totalA);\n    const a40 = Math.round(frac40 * totalA);\n\n    const potTarget = parseFloat(document.getElementById('potlifeInput').value) || 15;\n    const percentFast = getPercentFromTime(potTarget, 'pot');\n    const calculatedDem = getTimeFromPercent(percentFast, 'dem');\n\n    const bFast = Math.round((percentFast \/ 100) * totalB);\n    const bNormal = totalB - bFast;\n\n    const finalHTML = `\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eA-component (total ${totalA} g)\u003c\/strong\u003e\u003cbr\u003e\n        Vario 15: \u003cstrong\u003e${a15} g\u003c\/strong\u003e\u003cbr\u003e\n        Vario 40: \u003cstrong\u003e${a40} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eB-component (total ${totalB} g)\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Vario F: \u003cstrong\u003e${bFast} g\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Normal: \u003cstrong\u003e${bNormal} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eWorking Times\u003c\/strong\u003e\u003cbr\u003e\n        Pot life: \u003cstrong\u003e${potTarget.toFixed(0)} min\u003c\/strong\u003e\u003cbr\u003e\n        Curing time: \u003cstrong\u003e${calculatedDem.toFixed(2)} hours\u003c\/strong\u003e\n      \u003c\/div\u003e\n    `;\n    document.getElementById('finalContent').innerHTML = finalHTML;\n    document.getElementById('finalResult').style.display = 'block';\n  }\n\n  function copyMix() {\n    const final = document.getElementById('finalContent').innerText;\n    navigator.clipboard.writeText(final).then(() =\u003e {\n      const btn = document.querySelector('#finalResult button');\n      if (btn) {\n        const orig = btn.innerHTML;\n        btn.innerHTML = '✅ Copied!';\n        setTimeout(() =\u003e { btn.innerHTML = orig; }, 2000);\n      }\n    });\n  }\n\n  function initCalculator() {\n    const elements = ['shoreInput', 'potlifeInput', 'totalMix'];\n    elements.forEach(id =\u003e {\n      const el = document.getElementById(id);\n      if (el) {\n        el.addEventListener('input', updateCalculator);\n        el.addEventListener('change', updateCalculator);\n      }\n    });\n    updateCalculator();\n  }\n\n  if (document.readyState === 'loading') {\n    document.addEventListener('DOMContentLoaded', initCalculator);\n  } else {\n    initCalculator();\n  }\n\u003c\/script\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjusting Hardness:\u003c\/strong\u003e Mix A-component of Vario 15 with Vario 40 for any desired hardness between Shore A 15-40 (e.g., 50\/50 mix = approx. Shore A 27.5)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjusting Speed:\u003c\/strong\u003e Mix Fast B-component (15 min) with Normal B-component (6 hours) for intermediate curing times - see graph in datasheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e Total B-component must always be 10% of the weight of the total A-component\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a world leader in silicone technologies for professional mold making, prototyping, and food-safe applications with over 100 years of expertise.\u003c\/p\u003e\n\u003cdiv style=\"background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;\"\u003e\n\u003ch3 style=\"color: #856404; margin-top: 0;\"\u003e⚠️ What the compliance statements do and do not say\u003c\/h3\u003e\n\u003cp\u003eWacker states BfR and FDA compliance for Elastosil Vario 15. That is a food-contact statement. It is explicitly not a statement of skin safety, biocompatibility or suitability for prolonged contact with mucous membranes. We do not use the term skin-friendly as a certification, because no such certification exists at raw material level.\u003c\/p\u003e\n\u003cp\u003eIf you are manufacturing a product with prolonged body contact, the assessment sits with you as the manufacturer of the finished article. Have the cured finished product tested by an accredited laboratory, as a minimum to ISO 10993-5 and ISO 10993-10. Contact us if you would like to discuss this.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch3\u003eImportant Warning: Inhibition with Addition-Cure Silicones\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-cure silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you are using (including gloves, spatulas, and cups) contain these ingredients, first conduct a small test. These substances are found, among other things, in many latex gloves, some plasticines, paints and glues, condensation-cure silicones, 1-component silicone sealant, natural rubbers, and 3D printing material (especially stereolithography). If you wish to use these, you will need to apply a protective layer of polyvinyl alcohol (PVA).\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on material selection, hardness adjustments, speed adjustments, and optimal results for your specific rapid prototyping or mold application. Contact us for technical datasheets, processing guidelines, or advice on the Wacker Vario modular system.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"0:55 Kg Set","offer_id":49489540514133,"sku":"S10071","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"1.1 Kg Set","offer_id":49489540546901,"sku":"S10720","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5.5 Kg Set","offer_id":49489540579669,"sku":"S10721","price":174.95,"currency_code":"EUR","in_stock":true},{"title":"22 Kg Set","offer_id":49489540612437,"sku":"S10998","price":659.0,"currency_code":"EUR","in_stock":false},{"title":"220 Kg. Kit","offer_id":49489540645205,"sku":"S11356","price":6255.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-vario-15-snel-snelle-translucente-platinum-49320249721173.png?v=1777907165"},{"product_id":"siliconen-condensatie-ht-60-hard","title":"Wacker Elastosil® M 4470 + Catalyst T 40 – Hard Condensation Silicone for Metal Casting \u0026 Industrial Moulding","description":"\u003ch2\u003eHeat-Resistant Hard Condensation Silicone for Molds for Low-Melting Metal Alloys and Industrial Reproduction Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® M 4470\u003c\/strong\u003e is a pourable, room-temperature curing condensation silicone (tin-cure) for the production of molds for casting low-melting metal alloys such as tin, lead, and zamak (max. melting point 300°C). The product cures into a firm rubber mold with a Shore A hardness of 60, a reddish-brown color, and excellent thermal stability and heat conductivity. The linear shrinkage is 0.8% — inherent to condensation curing. With Catalyst T 40, the processing time is approximately 40 minutes, and the mold is tack-free after 3–4 hours at 23°C and 50% relative humidity. The mixing ratio is 100:2 (base:catalyst) by weight.\u003c\/p\u003e\n\n\u003cp\u003eELASTOSIL® M 4470 is particularly suitable for applications where dimensional flexibility is more important than zero shrinkage, and where high temperature resistance, high hardness, and good heat dissipation are essential. Not suitable for food-safe applications (no BfR\/FDA conformity).\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShore A hardness 60 – high and rigid:\u003c\/strong\u003e The high hardness ensures dimensionally stable molds with minimal distortion during demolding, ideal for molds with few undercuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermally stable for metal casting up to 300°C melting point:\u003c\/strong\u003e Its excellent thermal stability makes the product suitable for casting low-melting metal alloys. This concerns short contact with the molten alloy in a thin-walled mold on an aluminium plate, not continuous exposure. For continuous service the limit is around 180 to 200°C. Before use, the mold should be post-cured at 150°C for several hours for optimal outgassing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThermally conductive – rapid heat dissipation:\u003c\/strong\u003e The high filler content (quartz 40–50%) ensures efficient heat dissipation, which shortens cycle times in metal casting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh swelling resistance to casting resins:\u003c\/strong\u003e Excellent resistance to polyesters, epoxies, and polyurethanes makes the product versatile for reproduction molds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot life ~40 min (with T 40) – workable processing time:\u003c\/strong\u003e Sufficient time for careful mixing, degassing, and pouring, even for larger mold volumes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGood flowability and self-deaeration:\u003c\/strong\u003e Low viscosity of 15,000 mPa·s and self-venting properties ensure bubble-free molds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eMolds for casting tin miniatures, sinkers, fishing lures, and fishing hooks\u003c\/li\u003e\n  \u003cli\u003eMolds for low-melting metal alloys (tin, lead, zamak, maximum melting point 300°C)\u003c\/li\u003e\n  \u003cli\u003eThin-walled molds placed on an aluminum plate for optimal heat dissipation during metal casting\u003c\/li\u003e\n  \u003cli\u003eReproduction molds with high rigidity for foam resin casting (PU foam; recommended: apply a barrier layer)\u003c\/li\u003e\n  \u003cli\u003eMolds with high swelling resistance for polyester casting resins\u003c\/li\u003e\n  \u003cli\u003eIndustrial molds and mold inserts where high temperature resistance is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\n\u003col\u003e\n  \u003cli\u003eStir the base component ELASTOSIL® M 4470 thoroughly before use — the quartz filler may settle.\u003c\/li\u003e\n  \u003cli\u003eWeigh 100 parts by weight of base and add 2 parts by weight of Catalyst T 40. At 2% T 40 the pot life is approximately 40 minutes and the mold is tack-free after 3 to 4 hours. A higher dosage shortens the pot life. For a longer processing time, use Catalyst T 37 at 3%, which gives a pot life of approximately 80 to 100 minutes with a cure time of 10 to 12 hours.\u003c\/li\u003e\n  \u003cli\u003eMix slowly and thoroughly for at least 3 minutes. Scrape the sides and bottom of the mixing container.\u003c\/li\u003e\n  \u003cli\u003eOptional: degas in a vacuum chamber (10–20 mbar) for 5–10 minutes.\u003c\/li\u003e\n  \u003cli\u003ePour within the pot life into the mold from the lowest possible height to minimize air entrapment.\u003c\/li\u003e\n  \u003cli\u003eAllow to cure at room temperature (23°C, min. 40% RH) for 3–4 hours (tack-free) up to 24 hours for full mechanical properties.\u003c\/li\u003e\n  \u003cli\u003ePost-curing recommended before metal casting: several hours at 150°C to release residual gases. The first castings may have a pimply surface due to residual gases — these should be removed.\u003c\/li\u003e\n  \u003cli\u003eOptional for metal casting: apply a thin layer of silicon carbide, graphite powder, or acetylene black to the mold surface for better wetting by the liquid metal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eThin-walled molds are most suitable for metal casting and should be placed on an aluminum plate or other heat-conductive material.\u003c\/p\u003e\n\n\u003cp\u003eManufactured by \u003cstrong\u003eWacker Chemie AG\u003c\/strong\u003e, a global market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Warning: Condensation Silicone – Shrinkage and Humidity\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is a condensation silicone (tin-cure). Unlike addition silicones, condensation silicones exhibit a linear shrinkage of 0.4–0.8% due to the alcohol released during crosslinking. For dimensionally critical applications, an addition silicone is the better choice. Ensure a relative humidity of at least 40% during processing — at lower humidity, the surface may remain sticky. Do not add water to the mixture. The catalyst T 40 contains a tetraorganotin compound, is flammable and can cause eye and skin irritation — consult the catalyst's SDS for complete safety measures.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\n\u003cp\u003eELASTOSIL® M 4470 is available in a kit format including Catalyst T 40. For longer pot lives, you can also use Catalyst T 37 (3% dosage, pot life 80–100 minutes, cure time 10–12 hours). Please contact us for technical datasheets, processing instructions, or product advice.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1.02 Kg Set","offer_id":49489541267797,"sku":"S10094","price":45.95,"currency_code":"EUR","in_stock":true},{"title":"5.1 Kg. Set","offer_id":49489541300565,"sku":"S11059","price":222.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4470-catalyst-t-40-harde-condensatie-si-48037920964949.jpg?v=1779800679"},{"product_id":"siliconen-schuim-gesloten-cel-2","title":"Silicone foam Closed Cell 2","description":"\u003cp\u003eThe Silicone Foam Closed Cell 2 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 2 times the volume. This silicone can of course also be colored with silicone dye.\u003cbr \/\u003e\u003cbr \/\u003eThis silicone is used for filling seat cushions, for props and decor and for filling flexible objects and bras, pillows and mattresses, etc. Foam plates\/foam mats are also made with this silicone. Silicone foam is also suitable for sealing electronics and lithium batteries (application testing is necessary).\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh frothing\u003c\/li\u003e\r\n\u003cli\u003eReturns well to intended shape after pressing\u003c\/li\u003e\r\n\u003cli\u003eHigh temperature and chemical resistance\u003c\/li\u003e\r\n\u003cli\u003eEasy to process\u003c\/li\u003e\r\n\u003cli\u003eUniform\/well distributed density over the entire casting.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio by weight: A:B = 100:100\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (pot life) at 25°C: 9 minutes\u003c\/li\u003e\r\n\u003cli\u003eDemoulding time at 25°C: 4 hours\u003c\/li\u003e\r\n\u003cli\u003eViscosity at 20°C: 4,000 mPa S\u003c\/li\u003e\r\n\u003cli\u003eColour: Whitish, colourless\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore C 12 depending on foaming\u003c\/li\u003e\r\n\u003cli\u003eDensity at 20°C: 0.54 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eFrothing factor in volume: 2\u003c\/li\u003e\r\n\u003cli\u003eClosed Cells\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003ePlease note: Pot life\/demoulding time is highly dependent on temperature! At a higher temperature, the processing time and demoulding time become shorter. Frothing factor is highly dependent on temperature. Process the product at the indicated temperature to obtain the described properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThese silicones can easily be mixed by hand or machine. Mix the A and B components carefully and in the indicated ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and wait until it has completely hardened before demoulding. You can possibly speed up the curing process by heating the whole thing. Every 10 degrees the time roughly halves. Please note that in this case air bubbles will have less time to escape.\u003cbr \/\u003e\u003cbr \/\u003ePlease note, the faster the silicone hardens, the less the foam effect. The silicone hardens faster at higher temperatures, so the foam effect cannot fully occur. Silicone that is too cold also gives a less good result because the foam formation starts to collapse again.\u003cbr \/\u003eSo preferably process the silicone at room temperature.\u003c\/p\u003e\r\n\u003cp\u003eWorking in a closed mold produces a more uniform foam mass.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can color the silicone intensely with \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-kleurstof\"\u003esilicone dye\u003c\/a\u003e .\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note: This is a silicone addition. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you are using (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and glues, condensation silicone, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e .\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least one year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you frequently work with silicone, it is recommended to wear gloves during processing and to ventilate the area well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"DE - Produktinformationen Silikonzusatz Farblos 5\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Siliconen Additie Kleurloos 5.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Silicone foam Closed Cell 2.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product information Silicone foam Closed Cell 2.pdf\" rel=\"noreferrer\"\u003eEN - Product information Silicone foam Closed Cell 2.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49531856027989,"sku":"S11666","price":35.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg set","offer_id":49531856093525,"sku":"S11667","price":67.17,"currency_code":"EUR","in_stock":false},{"title":"10 kg set","offer_id":49531856126293,"sku":"S11668","price":313.09,"currency_code":"EUR","in_stock":false},{"title":"40 kg (20 kg A + 20 kg B)","offer_id":50636971180373,"sku":"S82028","price":1208.04,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-schuim-gesloten-cel-2-48098032320853.png?v=1757509637"},{"product_id":"t37-harder-voor-siliconen-condensatie-bestand-tege","title":"Wacker Catalyst T 37® – Hardener for ELASTOSIL® M Condensation Silicones \u0026 Mold Making","description":"\u003ch2\u003ePremium Tin Catalyst Hardener for Professional Condensation Silicone and Mold Making Applications\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWacker® Catalyst T 37\u003c\/strong\u003e is the standard hardener (B-component) for condensation-curing ELASTOSIL® M silicone rubbers, including M 4400, M 4440, and M 4470. It is a colorless, low-viscosity tin catalyst with a density of 0.94 g\/cm³ and a viscosity of approximately 2 mPa·s. T 37 is distinguished by the excellent resistance it imparts to the cured silicone against polyurethane casting resins, increasing the number of castings per mold. The standard dosage is 3 to 4% by weight of the A-component: at 3%, you achieve a working time of approximately 80–100 minutes and a curing time of 10–12 hours; at 4%, this shortens to 50–70 minutes working time and 8–10 hours curing time. Less hardener prolongs the curing time and gives air bubbles more time to escape; more hardener accelerates curing but increases shrinkage and aging of the mold.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDosage 3–4% by weight\u003c\/strong\u003e – precisely adjustable working and curing time as desired.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 0.94 g\/cm³\u003c\/strong\u003e – low-viscosity catalyst (approx. 2 mPa·s) that can be easily and uniformly mixed in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life 80–100 minutes at 3%\u003c\/strong\u003e – ample working time for large and complex molds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh polyurethane resistance\u003c\/strong\u003e – significantly increases the number of castings with polyurethane casting resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash point 70 °C\u003c\/strong\u003e – for safe processing under normal workshop conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixable with fast catalyst\u003c\/strong\u003e – can be combined with T 47 to further accelerate the curing speed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHardener for ELASTOSIL® M 4400, M 4440, and M 4470 condensation silicones.\u003c\/li\u003e\n\u003cli\u003eMold making for casting polyurethane and polyester resins.\u003c\/li\u003e\n\u003cli\u003eReproduction of statues, ornaments, and decorative elements.\u003c\/li\u003e\n\u003cli\u003eArt casting, model making, and prop and set construction.\u003c\/li\u003e\n\u003cli\u003eMixing with other Wacker T-catalysts for a desired curing speed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir the condensation silicone (A-component) thoroughly in its packaging before use.\u003c\/li\u003e\n\u003cli\u003eWeigh out Catalyst T 37 by weight: 3 to 4 grams per 100 grams of A-component. Less hardener prolongs curing time, more hardener accelerates it but increases shrinkage.\u003c\/li\u003e\n\u003cli\u003eMix A and B components slowly and thoroughly until a homogeneous mixture is achieved; scrape the sides and bottom of the mixing container.\u003c\/li\u003e\n\u003cli\u003eProcess the mixture within the pot life and never prepare more than you can process within that time.\u003c\/li\u003e\n\u003cli\u003eAllow the silicone to fully cure according to the specifications of the chosen ELASTOSIL® M product before demolding.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003ePlease note: pot life and curing time are highly dependent on the mixing ratio and humidity. With more hardener or higher humidity, both will be shorter.\u003c\/p\u003e\u003cp\u003eWacker Chemie AG is a world market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\u003ch3\u003eProfessional Support\u003c\/h3\u003e\u003cp\u003eNot sure which catalyst or dosage is right for your silicone and desired processing time? Our specialists will gladly advise you on the correct choice and possible combinations with other Wacker T-catalysts. Feel free to contact us.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"50 gram bottle of WACKER® Catalyst T-37","offer_id":49531856814421,"sku":"S11636","price":5.95,"currency_code":"EUR","in_stock":true},{"title":"250 gram bottle of WACKER® Catalyst T-37","offer_id":49531856847189,"sku":"S11635","price":20.95,"currency_code":"EUR","in_stock":true},{"title":"800grams bottle WACKER® Catalyst T-37","offer_id":49531856879957,"sku":"S11634","price":50.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-catalyst-t-37-verharder-voor-elastosil-m-condensatie-48449798865237.jpg?v=1780056286"},{"product_id":"wacker-elastosil-rt-480-smeerbare-siliconen","title":"Wacker ELASTOSIL® RT 480 + T37 – Spatula-Applicable Condensation Silicone for Spatula Molds \u0026 FIPG Gaskets","description":"\u003ch2\u003ePremium Spreadable Condensation Silicone for Professional Mold Making and Sealing Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® RT 480\u003c\/strong\u003e is a high-quality 2-component condensation-curing (tin-cure) spreadable silicone with Shore A 55 hardness, specially developed for making spatula molds on vertical and inclined surfaces and for formed-in-place gaskets (FIPG). This professional product combines high viscosity (250,000 mPa·s) for spatula applications with excellent mechanical strength (4.5 N\/mm² tensile strength) and flexible curing speed through choice of hardener. \u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpreadability on vertical surfaces:\u003c\/strong\u003e High viscosity (250,000 mPa·s) prevents sagging on inclined and vertical surfaces for spatula molds and brush-on molds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible curing speed:\u003c\/strong\u003e Choice between hardener T 37 (120 min pot life, 9 hours demolding) or T 40 (20 min pot life, 3 hours demolding) for optimal production efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical strength:\u003c\/strong\u003e 4.5 N\/mm² tensile strength and \u003e7 N\/mm tear strength for durable, long-lasting molds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 55 hardness:\u003c\/strong\u003e Flexible-rigid for dimensionally stable molds that retain their geometry for complex castings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal shrinkage:\u003c\/strong\u003e 0.25% (with T 40) to 0.5% (with T 37) for dimensionally accurate reproductions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWacker quality:\u003c\/strong\u003e Reliable condensation silicone from a world leader in silicone technology.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpatula molds and brush-on molds for ornaments, statues and architectural elements on vertical surfaces\u003c\/li\u003e\n\u003cli\u003eFIPG (Formed-In-Place Gaskets): in-situ formed seals for industrial components\u003c\/li\u003e\n\u003cli\u003eMolds for art casting, sculptures and decorative objects\u003c\/li\u003e\n\u003cli\u003eModel making and prototyping where dimensionally stable, stiffer molds are required\u003c\/li\u003e\n\u003cli\u003eO-rings and seals for technical applications\u003c\/li\u003e\n\u003cli\u003eHorse hooves and veterinary impressions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAccurately weigh components A and B in the correct ratio\u003c\/li\u003e\n\u003cli\u003eMix both components until a homogeneous color is achieved\u003c\/li\u003e\n\u003cli\u003eApply with a spatula or brush to the model\u003c\/li\u003e\n\u003cli\u003eProcess within the pot life and wait until fully cured before demolding\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note – humidity dependence:\u003c\/strong\u003e Pot life and demolding time are highly dependent on the amount of component B and humidity. Higher humidity shortens processing time and demolding time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot suitable for:\u003c\/strong\u003e Food-safe applications (for these, use our \u003ca title=\"Food-safe silicones\" href=\"https:\/\/www.siliconesandmore.com\/collections\/voedselveilige-siliconen-geschikt-voor-culinaire-voedselmallen\"\u003eFood-safe silicones\u003c\/a\u003e) and skin contact\/SFX (for these, use our \u003ca href=\"https:\/\/www.siliconesandmore.com\/collections\/siliconen-voor-maskers-en-sfx\"\u003eSFX silicones\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a world leader in silicone technologies for professional mold making, industrial sealing and technical applications with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on hardener selection, processing techniques, support shell construction and optimal results for your specific spatula mold or FIPG application. Contact us for technical datasheets, processing guidelines or advice on condensation silicones.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1 kg A component + 50 grams T37","offer_id":49531856945493,"sku":"S11641","price":55.0,"currency_code":"EUR","in_stock":true},{"title":"5 kg A component + 250 grams T37","offer_id":49531856978261,"sku":"S10033","price":234.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-rt-480-t40-spatelbare-condensatie-silicon-48098032517461.webp?v=1775035603"},{"product_id":"siliconen-condensatie-35-matig-hard","title":"Silicone Condensation 35 A component","description":"\u003cp\u003eThese silicones have good fluidity, provide a lot of detail and have a high tensile strength and are soft. The silicone Condensation 35 is a 2-component cast silicone that hardens at room temperature. Excellent for casting molds for detailed and heavy objects such as plaster, cement and concrete molds\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDON'T FORGET THE B component.\u003c\/strong\u003e\u003c\/span\u003e You must order this separately. For standard use, condensation B 5% is recommended as a B component.\u003c\/p\u003e\r\n\u003cp\u003eIf you want to process polyester in these molds, we recommend using the special B component: Wacker T51 (5%)\u003c\/p\u003e\r\n\u003cp\u003eIf you want to use epoxy or polyurethane in these molds, we recommend using the special B component: Wacker T21 (5%)\u003c\/p\u003e\r\n\u003cp\u003eIf you want to work very quickly, we recommend using the special B component: Wacker T47 (1-2%). This B component may also be mixed with the original or above B components to achieve a speed of your choice with the properties of the above B components.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can easily mix the silicone Condensation 35 by hand or machine. Mix the A and B components carefully and in the stated ratio.\u003c\/p\u003e\r\n\u003cp\u003eCondensation B = 5%, so for 100 grams of A you use 5 grams of B 5.\u003c\/p\u003e\r\n\u003cp\u003eT21 = 5%, so for 100 grams of A you use 5 grams of T21\u003c\/p\u003e\r\n\u003cp\u003eT51 = 5%, so for 100 grams of A you use 5 grams of T51\u003c\/p\u003e\r\n\u003cp\u003eT47 = 1-2%, so for 100 grams of A you use 1 to 2 grams of T47\u003c\/p\u003e\r\n\u003cp\u003eYou can use 0.5% less or more hardener. If you use less hardener, curing takes longer and air bubbles have more time to escape. Be careful not to use too little hardener, as the silicone may no longer harden (properly). With more hardener, curing will proceed faster, meaning the mold will be ready sooner. The disadvantage is that the mold will also age sooner and shrink more.\u003c\/p\u003e\r\n\u003cp\u003eProcess the mixture within the pot life (processing time) and never make more than you can process within the pot life. Wait until the mold has completely hardened before removing the mold.\u003c\/p\u003e\r\n\u003cp\u003ePlease note: Pot life (processing time) and demoulding time are highly dependent on the mixing ratio and humidity! When adding more silicone B (harder) or at higher humidity, the pot life and demoulding time become shorter!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIron, spread or spatula\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you want to spread\/spread\/iron the silicone on something, you can add \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-c\" target=\"_blank\" rel=\"noopener\"\u003eThixo C\u003c\/a\u003e (0.6%-2%) (usually 1%). \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-c\" target=\"_blank\" rel=\"noopener\"\u003eThixo C\u003c\/a\u003e is a thickener and makes it possible to spread the silicone. You should take into account that in this case the mold must be provided with a support cap. This support cap can consist of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/gips-gipsverband\" target=\"_blank\" rel=\"noopener\"\u003eplaster cast,\u003c\/a\u003e an \u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/epoxy-steunkap.html\" target=\"_blank\" rel=\"noopener\"\u003eepoxy support cap,\u003c\/a\u003e or \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/acryl-hars-set\" target=\"_blank\" rel=\"noopener\"\u003eacrylic resin\u003c\/a\u003e with \u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/a1-thixotrope-a.html\" target=\"_blank\" rel=\"noopener\"\u003ethickener\u003c\/a\u003e and \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/triaxiaal-glasvezeldoek\" target=\"_blank\" rel=\"noopener\"\u003eglass fabric\u003c\/a\u003e \/\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003cbr \/\u003e\u003c\/strong\u003e Provided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least 1 year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003cbr \/\u003e\u003c\/strong\u003e Use splash goggles, suitable liquid-tight gloves, an apron and work in a well-ventilated area. See Safety Data Sheet for more information\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Handleiding%20eendelige%20strijk%20spatelmal,%20sierstrip.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Silicone Condensation 35.pdf\"\u003eEN - Product Information Silicone Condensation 35.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Handleiding%20eendelige%20strijk%20spatelmal,%20sierstrip.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e Instructions for use: one-piece ironing spatula template, decorative strip\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Handleiding%20kopieren%20van%20een%20kaars.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e Copy manual of a candle\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Handleiding%20voor%20het%20kopieren%20van%20een%20ornament%20of%20sierbeton.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e Manual for copying an ornament or decorative concrete\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Handleiding%20eendelige%20gietmal%20penning.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e Manual one-piece casting mold medal\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"0.5 kg A (Note: order B separately!)","offer_id":49531857011029,"sku":"S11619","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"1 kg A component (Note: order B separately!)","offer_id":49531857043797,"sku":"S11620","price":18.5,"currency_code":"EUR","in_stock":true},{"title":"5 Kg A component (Note: order B separately!)","offer_id":49531857076565,"sku":"S11621","price":90.0,"currency_code":"EUR","in_stock":true},{"title":"20 Kg A component (Note: order B separately!)","offer_id":49531857109333,"sku":"S11622","price":322.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-condensatie-35-a-component-48098032615765.png?v=1757509637"},{"product_id":"t21-harder-voor-siliconen-condensatie-bestand-tege","title":"Wacker Catalyst T 21® – Catalyst for ELASTOSIL® M Condensation Silicones \u0026 PU and Epoxy Casting","description":"\u003ch2\u003eStandard condensation catalyst for PU- and epoxy-resistant silicone molds\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Catalyst T 21\u003c\/strong\u003e is the standard catalyst (B-component) for the condensation-curing ELASTOSIL® M silicone rubbers for mold making: Elastosil M 4511, M 4512, M 4514, and M 4541. This colorless, low-viscosity catalyst based on an organotin compound has a density of 0.96 g\/cm³ and a dynamic viscosity of 15 mPa·s at 23 °C. According to Wacker, T 21 provides excellent chemical resistance to polyurethane resins, significantly extending the mold's lifespan. For Elastosil M 4514, Wacker also specifies T 21 for casting epoxy. The standard dosage is 5 weight percent of the A-component (100:5 ratio). At a 5% dosage with Elastosil M 4514, the pot life is approximately 60 to 90 minutes and the demolding time is 8 to 12 hours at 23 °C and 50% relative humidity.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDosage 5% (100:5)\u003c\/strong\u003e – fixed, easy-to-measure weight ratio to the A-component for reliable curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent PU resistance\u003c\/strong\u003e – Wacker positions T 21 for a high number of casts in polyurethane casting resin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso for epoxy\u003c\/strong\u003e – with Elastosil M 4514, the specified catalyst for casting epoxy resins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 0.96 g\/cm³ and viscosity 15 mPa·s\u003c\/strong\u003e – very low-viscosity, mixes quickly into the base component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixable with Catalyst T 47\u003c\/strong\u003e – at 95:5 (T 21 : T 47), the pot life drops to 20 to 40 minutes and the mold can be demolded after 4 to 6 hours; at 90:10, the pot life is approximately 20 minutes and the demolding time 2 to 4 hours.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColorless\u003c\/strong\u003e – the catalyst does not discolor the mold.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCuring Elastosil M 4511, M 4512, M 4514, and M 4541 condensation silicones.\u003c\/li\u003e\n\u003cli\u003eMold making for casting polyurethane casting resin.\u003c\/li\u003e\n\u003cli\u003eMold making for casting epoxy resins.\u003c\/li\u003e\n\u003cli\u003eCatalyst for our \u003ca href=\"\/en\/products\/silicone-condensation-20-for-polyurethane-and-epox\"\u003eSilicone Condensation 20 Resin\u003c\/a\u003e, which comes with T 21 as standard.\u003c\/li\u003e\n\u003cli\u003eMixing with Catalyst T 47 for accelerated curing in time-critical production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStir the condensation silicone (A-component) thoroughly before use to distribute any sedimentation.\u003c\/li\u003e\n\u003cli\u003eWeigh the catalyst at 5% of the A-component's weight, so 5 grams of T 21 per 100 grams of silicone. You can use 0.5% less or more: less extends curing (more time for de-aeration), more accelerates it but increases shrinkage. Never use too little catalyst, otherwise the silicone will not cure (properly).\u003c\/li\u003e\n\u003cli\u003eFor faster curing, you can mix T 21 with \u003ca href=\"\/en\/products\/t47-fast-hardener-for-silicone-condensation-20-med\"\u003eCatalyst T 47\u003c\/a\u003e, for example in a 95:5 ratio (per 100 grams of A: 4.75 grams of T 21 with 0.25 grams of T 47).\u003c\/li\u003e\n\u003cli\u003eMix the catalyst carefully and evenly into the silicone, scraping the walls and bottom of the mixing container. T 21 is colorless, so you cannot tell by color when the catalyst is evenly distributed; therefore, mix thoroughly.\u003c\/li\u003e\n\u003cli\u003eProcess the mixture within the pot life and never prepare more than you can process within that time.\u003c\/li\u003e\n\u003cli\u003eWait until the mixture is fully cured before demolding.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eNote: pot life (working time) and demolding time are highly dependent on the mixing ratio and humidity. With more catalyst or higher humidity, both pot life and demolding time will be shorter. Below 40% relative humidity, the silicone surface may remain tacky; in this case, increase the humidity in the room.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCasting epoxy:\u003c\/strong\u003e Wacker recommends post-curing condensation molds for epoxy for a few hours at approximately 150 °C before first use. \u003cstrong\u003eCasting polyester?\u003c\/strong\u003e Then use \u003ca href=\"\/en\/products\/t51-harder-for-silicone-condensation\"\u003eCatalyst T 51\u003c\/a\u003e, which Wacker developed specifically for polyester resins. More explanation about the right combination can be found at \u003ca href=\"\/en\/collections\/i-want-to-pour-an-aggressive-resin-epoxy-polyurethane-polyester-into-the-mold\"\u003esilicones for aggressive resins\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWacker Chemie AG is a global market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e if stored in sealed packaging, dry and cool, the shelf life is at least the period stated on the label. Exceeding this does not automatically render the product unusable; check its properties before use.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis product is intended for the business market. For larger quantities or customized products, please contact us at info@siliconesandmore.com.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you undecided between T 21 and T 51, or unsure about mixing with T 47 for faster curing? Our specialists are happy to advise you on the best catalyst combination for your resin and application. Feel free to contact us.\u003c\/p\u003e\n","brand":"Wacker","offers":[{"title":"50 gram bottle of WACKER® Catalyst T-21","offer_id":49531857142101,"sku":"S11329","price":6.05,"currency_code":"EUR","in_stock":true},{"title":"250 gram bottle of WACKER® Catalyst T-21","offer_id":49531857207637,"sku":"S11330","price":20.11,"currency_code":"EUR","in_stock":true},{"title":"800grams bottle WACKER® Catalyst T-21","offer_id":49531857240405,"sku":"S11633","price":55.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-t21-b-component-voor-condensatie-siliconen-48098032550229.png?v=1730788672"},{"product_id":"t51-harder-voor-siliconen-condensatie","title":"Wacker Catalyst T 51® – Catalyst for ELASTOSIL® M Condensation Silicones \u0026 Polyester Casting","description":"\u003ch2\u003ePremium condensation catalyst for professional mold making and reproduction applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Catalyst T 51\u003c\/strong\u003e is the standard catalyst (B-component) for the condensation-curing ELASTOSIL® M silicone rubbers, such as Elastosil M 4511, M 4512, M 4514, and M 4541. This reddish-brown, low-viscosity catalyst based on an organotin compound and silicic acid ester has a density of 0.92 g\/cm³ and a dynamic viscosity of 50 mPa·s at 23 °C. T 51 is specifically optimized for excellent chemical resistance to polyester resins, significantly extending the mold's lifespan. The standard dosage is 5 weight percent of the A-component (100:5 ratio). Less catalyst extends the pot life and demolding time and allows air bubbles more time to escape; more catalyst accelerates curing but increases shrinkage and mold aging. At a 5% dosage with Elastosil M 4514, the pot life is approximately 60 to 90 minutes and the demolding time is 8 to 12 hours at 23 °C and 50% relative humidity.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDosage 5% (100:5)\u003c\/strong\u003e – fixed, easy-to-measure weight ratio to the A-component for reliable curing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eDensity 0.92 g\/cm³ and viscosity 50 mPa·s\u003c\/strong\u003e – low-viscosity, mixes quickly and evenly with the base component.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eExcellent polyester resistance\u003c\/strong\u003e – significantly extends mold life when casting polyester resins.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eMixable with Catalyst T 47\u003c\/strong\u003e – pot life and demolding time precisely adjustable; at 95:5 (T 51 : T 47), the pot life drops to approximately 30 minutes, and the mold can be demolded after about 4 hours.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eReddish-brown color\u003c\/strong\u003e – provides visual mixing control, so you can see when the catalyst is evenly distributed.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eLong shelf life\u003c\/strong\u003e – stable storage, even in larger quantities, if stored dry and cool.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eCuring Elastosil M 4511, M 4512, M 4514, and M 4541 condensation silicones.\u003c\/li\u003e\n\n\u003cli\u003eMold making for casting polyester resins.\u003c\/li\u003e\n\n\u003cli\u003eReproduction molds for plaster, concrete, and artificial stone.\u003c\/li\u003e\n\n\u003cli\u003eMolds for wax, candles, and low-melting metal alloys.\u003c\/li\u003e\n\n\u003cli\u003eMixing with Catalyst T 47 for accelerated curing in time-critical production.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\n\u003cli\u003eStir the condensation silicone (A-component) thoroughly before use to distribute any sedimentation.\u003c\/li\u003e\n\n\u003cli\u003eWeigh the catalyst at 5% of the A-component's weight, so 5 grams of T 51 per 100 grams of silicone. You can use 0.5% less or more: less extends curing (more time for de-aeration), more accelerates it but increases shrinkage. Never use too little catalyst, otherwise the silicone will not cure (properly).\u003c\/li\u003e\n\n\u003cli\u003eFor faster curing, you can mix T 51 with Catalyst T 47, for example, in a 95:5 ratio (per 100 grams of A: 4.75 grams of T 51 with 0.25 grams of T 47).\u003c\/li\u003e\n\n\u003cli\u003eMix the catalyst carefully and evenly into the silicone until the color is uniform.\u003c\/li\u003e\n\n\u003cli\u003eProcess the mixture within the pot life and never prepare more than you can process within that time.\u003c\/li\u003e\n\n\u003cli\u003eWait until the mixture is fully cured before demolding.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\u003cp\u003eNote: pot life (working time) and demolding time are highly dependent on the mixing ratio and humidity. With more catalyst or higher humidity, both pot life and demolding time will be shorter. Below 40% relative humidity, the silicone surface may remain tacky; in this case, increase the humidity in the room.\u003c\/p\u003e\n\u003cp\u003eWacker Chemie AG is a global market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e if stored in sealed packaging, dry and cool, the shelf life is at least the period stated on the label. Exceeding this does not automatically render the product unusable; check its properties before use.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThis product is intended for the business market. For larger quantities or customized products, please contact us at info@siliconesandmore.com.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you unsure about the correct dosage or mixing with T 47 for faster curing? Our specialists are happy to advise you on the best catalyst combination for your application. Feel free to contact us.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Wacker","offers":[{"title":"50 gram bottle of WACKER® Catalyst T-51","offer_id":49531857305941,"sku":"S11333","price":6.05,"currency_code":"EUR","in_stock":true},{"title":"250 gram bottle of WACKER® Catalyst T-51","offer_id":49531857338709,"sku":"S10433","price":20.11,"currency_code":"EUR","in_stock":true},{"title":"800grams bottle WACKER® Catalyst T-51","offer_id":49531857371477,"sku":"S10143","price":57.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-catalyst-t-51-verharder-voor-elastosil-m-condensatie-48098033041749.png?v=1780052735"},{"product_id":"siliconen-condensatie-5-zacht","title":"Silicone Condensation 5 A component - Soft","description":"\u003cp\u003eThese silicones have good fluidity, provide a lot of detail and have a high tensile strength and are soft. The silicone Condensation 5 is a 2-component cast silicone that cures at room temperature. Excellent for casting molds for fragile objects such as candle molds, soap molds and many other casting materials.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eDON'T FORGET THE B component.\u003c\/strong\u003e\u003c\/span\u003e You must order this separately. For standard use, \u003ca href=\"https:\/\/www.siliconesandmore.com\/en\/products\/b-5-separate-hardener-for-silicone-condensation-un\"\u003econdensation B 5%\u003c\/a\u003e is recommended as a B component.\u003c\/p\u003e\r\n\u003cp\u003eIf you want to process polyester in these molds, we recommend using the special B component: Wacker T51 (5%)\u003c\/p\u003e\r\n\u003cp\u003eIf you want to use epoxy or polyurethane in these molds, we recommend using the special B component: Wacker T21 (5%)\u003c\/p\u003e\r\n\u003cp\u003eIf you want to work very quickly, we recommend using the special B component: Wacker T47 (1-2%). This B component may also be mixed with the original or above B components to achieve a speed of your choice with the properties of the above B components.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can easily mix the silicone Condensation 5 by hand or machine. Mix the A and B components carefully and in the stated ratio.\u003c\/p\u003e\r\n\u003cp\u003eCondensation B = 5%, so for 100 grams of A you use 5 grams of B 5.\u003c\/p\u003e\r\n\u003cp\u003eT21 = 5%, so for 100 grams of A you use 5 grams of T21\u003c\/p\u003e\r\n\u003cp\u003eT51 = 5%, so for 100 grams of A you use 5 grams of T51\u003c\/p\u003e\r\n\u003cp\u003eT47 = 1-2%, so for 100 grams of A you use 1 to 2 grams of T47\u003c\/p\u003e\r\n\u003cp\u003eYou can use 0.5% less or more hardener. If you use less hardener, curing takes longer and air bubbles have more time to escape. Be careful not to use too little hardener, as the silicone may no longer harden (properly). With more hardener, curing will proceed faster, meaning the mold will be ready sooner. The disadvantage is that the mold will also age sooner and shrink more.\u003c\/p\u003e\r\n\u003cp\u003eProcess the mixture within the pot life (processing time) and never make more than you can process within the pot life. Wait until the mold has completely hardened before removing the mold.\u003c\/p\u003e\r\n\u003cp\u003ePlease note: Pot life (processing time) and demoulding time are highly dependent on the mixing ratio and humidity! When adding more silicone B (harder) or at higher humidity, the pot life and demoulding time become shorter!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eIron, spread or spatula\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you want to spread\/spread\/iron the silicone on something, you can add \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-c\" target=\"_blank\" rel=\"noopener\"\u003eThixo C\u003c\/a\u003e (0.6%-2%) (usually 1%). \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-c\" target=\"_blank\" rel=\"noopener\"\u003eThixo C\u003c\/a\u003e is a thickener and makes it possible to spread the silicone. You should take into account that in this case the mold must be provided with a support cap. This support cap can consist of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/gips-gipsverband\" target=\"_blank\" rel=\"noopener\"\u003eplaster cast,\u003c\/a\u003e an \u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/epoxy-steunkap.html\" target=\"_blank\" rel=\"noopener\"\u003eepoxy support cap,\u003c\/a\u003e or \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/acryl-hars-set\" target=\"_blank\" rel=\"noopener\"\u003eacrylic resin\u003c\/a\u003e with \u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/a1-thixotrope-a.html\" target=\"_blank\" rel=\"noopener\"\u003ethickener\u003c\/a\u003e and \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/triaxiaal-glasvezeldoek\" target=\"_blank\" rel=\"noopener\"\u003eglass fabric\u003c\/a\u003e \/\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003cbr \/\u003e\u003c\/strong\u003e Provided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least 1 year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003cbr \/\u003e\u003c\/strong\u003e Use splash goggles, suitable liquid-tight gloves, an apron and work in a well-ventilated area. See Safety Data Sheet for more information\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Manual%20One%20piece%20brush-on%20mould,%20brick%20slip.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Silicone Condensation 5.pdf\"\u003eEN - Product Information Silicone Condensation 5.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Manual%20One%20piece%20brush-on%20mould,%20brick%20slip.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eManual One piece brush-on mould, brick slip\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Manual%20Making%20a%20two%20piece%20mould.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eManual Making a two piece mould\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Product%20Information%20Silicone%20Condensation%2020%20Starter%20kit.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eManual Mould in one part, badge\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"0.5 kg A (Note: order B separately!)","offer_id":49531857404245,"sku":"S11615","price":9.95,"currency_code":"EUR","in_stock":true},{"title":"1 kg A component (Note: order B separately!)","offer_id":49531857437013,"sku":"S11616","price":18.5,"currency_code":"EUR","in_stock":true},{"title":"5 Kg A component (Note: order B separately!)","offer_id":49531857469781,"sku":"S11617","price":90.0,"currency_code":"EUR","in_stock":true},{"title":"20 Kg A component (Note: order B separately!)","offer_id":49531857502549,"sku":"S11618","price":322.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-condensatie-5-a-component-zacht-48098032976213.png?v=1757509637"},{"product_id":"siliconen-schuim-gesloten-cel-3-smeerbaar","title":"Silicone foam Closed Cell 3 - Spreadable","description":"\u003cp\u003eThe Silicone Foam Closed Cell 3 Spreadable is a 2-component (Platinum) Poly-Addition casting silicone\/ spreadable silicone that cures at \u003cstrong\u003eelevated temperature\u003c\/strong\u003e and foams up to 3 times the volume. This silicone can of course also be colored with silicone dye.This is a thicker version of the regular Silicone Foam Closed Cell 3. The increased temperature is necessary for a better foam effect.\u003cbr \/\u003e\u003cbr \/\u003eThis silicone is used for filling seat cushions, for props and decor and for filling flexible objects and bras, pillows and mattresses, etc. Foam plates\/foam mats are also made with this silicone. Silicone foam is also suitable for sealing electronics and lithium batteries (application testing is necessary).\u003c\/p\u003e\r\n\u003cp\u003eThe spreadability makes this silicone better suited for the production of foamed sheets than the more fluid version.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh frothing\u003c\/li\u003e\r\n\u003cli\u003eReturns well to intended shape after pressing\u003c\/li\u003e\r\n\u003cli\u003eHigh temperature and chemical resistance\u003c\/li\u003e\r\n\u003cli\u003eEasy to process\u003c\/li\u003e\r\n\u003cli\u003eUniform\/well distributed density over the entire casting.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio by weight: A:B = 100:100\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (pot life) at 25°C: 3 minutes\u003c\/li\u003e\r\n\u003cli\u003eDemoulding time at 100°C: 50 minutes\u003c\/li\u003e\r\n\u003cli\u003eViscosity at 20°C: 50.000 mPa S\u003c\/li\u003e\r\n\u003cli\u003eColour: Whitish, colourless\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore C 2-50 (Shore A 30-85) depending on foaming\u003c\/li\u003e\r\n\u003cli\u003eDensity at 20°C: 0.352 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eFrothing factor in volume: 3\u003c\/li\u003e\r\n\u003cli\u003eFlame retardant UL94-HB\u003c\/li\u003e\r\n\u003cli\u003eClosed Cells\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003ePlease note: Pot life\/demoulding time is highly dependent on temperature! At a higher temperature, the processing time and demoulding time become shorter. Frothing factor is highly dependent on temperature. Process the product at the indicated temperature to obtain the described properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThese silicones can easily be mixed by hand or machine. Mix the A and B components carefully and in the indicated ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and wait until it has completely hardened before demoulding. The foaming effect only works at elevated temperatures (From 60 o)\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr \/\u003ePlease note, the faster the silicone hardens, the less the foam effect. The silicone hardens faster at higher temperatures, so the foam effect cannot fully occur. Silicone that is too cold also gives a less good result because the foam formation then starts to collapse again.\u003cbr \/\u003eSo preferably process the silicone at the indicated temperature.\u003c\/p\u003e\r\n\u003cp\u003eWorking in a closed mold produces a more uniform foam mass.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can color the silicone intensely with \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-kleurstof\"\u003esilicone dye\u003c\/a\u003e .\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note: This is a silicone addition. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you are using (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and glues, condensation silicone, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e .\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least one year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you frequently work with silicone, it is recommended to wear gloves during processing and to ventilate the area well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"DE - Produktinformationen Silikonzusatz Farblos 5\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Siliconen Additie Kleurloos 5.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Silicone foam Closed Cell 3 - Spreadable.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/EN - Product information Silicone foam Closed Cell 3 - Spreadable.pdf\" rel=\"noreferrer\"\u003eEN - Product information Silicone foam Closed Cell 3 - Spreadable.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49531857731925,"sku":"S11578","price":31.71,"currency_code":"EUR","in_stock":true},{"title":"2 kg set","offer_id":49531857797461,"sku":"S11579","price":56.09,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531857830229,"sku":"S11580","price":272.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-schuim-gesloten-cel-3-smeerbaar-48098033533269.png?v=1757509637"},{"product_id":"siliconen-additie-kleurloos-25","title":"Silicone Addition Colorless 25 – Platinum Silicone for Strong Molds \u0026 Finished Products","description":"\u003cul\u003e\n\n\u003cli\u003e\n\n\u003ch2\u003e Premium Platinum Silicone for Professional Molds and Finished Products\u003c\/h2\u003e\n\n\u003cp\u003e \u003cstrong\u003eSilicone Addition Colorless 25\u003c\/strong\u003e is a two-component, platinum-cure (addition-crosslinking) casting silicone with Shore A 25 hardness and exceptional mechanical properties. This high-performance silicone combines high tensile and tear strength (7 N\/mm² and 30 N\/mm²) with extreme elongation (\u0026gt;420%) and minimal shrinkage (\u0026lt;0.1%), ideal for durable molds and strong end products. It flows easily, vents easily, and is perfectly colored with silicone colorant. Simple 1:1 mixing ratio.\u003c\/p\u003e\n\n\u003ch3\u003e Key Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExceptional mechanical strength:\u003c\/strong\u003e 7 N\/mm² tensile strength and 30 N\/mm tear strength for durable molds that can handle hundreds of castings\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExtreme stretchability:\u003c\/strong\u003e \u0026gt;420% elongation for flexible applications without cracking or permanent deformation\u003c\/li\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eShore A 25 hardness:\u003c\/strong\u003e Optimal balance between flexibility and stability for versatile applications\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePlatinum-cure technology:\u003c\/strong\u003e Minimal shrinkage (\u0026lt;0.1%), no inhibition on most substrates, long service life\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eGood fluidity and self-venting:\u003c\/strong\u003e 3,900 mPa·s viscosity for excellent detail reproduction without vacuum treatment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePerfect coloring:\u003c\/strong\u003e Transparent with a light yellowish glow, excellent for coloring with silicone dye for intense colors.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e Typical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Strong, durable molds for concrete, cement and WetCast precast elements\u003c\/li\u003e\n\n\u003cli\u003e Props, masks and flexible decorative elements for SFX, film and theatre\u003c\/li\u003e\n\n\u003cli\u003e End products and prototypes where high mechanical strength is required\u003c\/li\u003e\n\n\u003cli\u003e Pad printing stamps and flexible printing applications in the graphics industry\u003c\/li\u003e\n\n\u003cli\u003e Podiatry applications and medical models with a balance between softness and firmness\u003c\/li\u003e\n\n\u003cli\u003e Jewelry molds, design objects and industrial applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003e Technical Features\u003c\/h3\u003e\n\n \u003cp\u003e\u003cstrong\u003eBasic specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Type: 2-component platinum-cure silicone (poly-addition)\u003c\/li\u003e\n\n\u003cli\u003e Mixing ratio: A:B = 100:100 (1:1 by weight)\u003c\/li\u003e\n\n\u003cli\u003e Pot life: 30 minutes at 20°C\u003c\/li\u003e\n\n\u003cli\u003e Degrindable: 3-5 hours at 20°C\u003c\/li\u003e\n\n\u003cli\u003e Viscosity: 3,900 mPa·s at 20°C\u003c\/li\u003e\n\n\u003cli\u003e Hardness: Shore A 23-27\u003c\/li\u003e\n\n\u003cli\u003e Tensile strength: 7 ± 2 N\/mm²\u003c\/li\u003e\n\n\u003cli\u003e Tear strength: 30 ± 2 N\/mm\u003c\/li\u003e\n\n\u003cli\u003e Elongation: \u0026gt;420%\u003c\/li\u003e\n\n\u003cli\u003e Shrinkage: \u0026lt;0.1%\u003c\/li\u003e\n\n\u003cli\u003e Density: 1.03 g\/cm³ at 20°C\u003c\/li\u003e\n\n\u003cli\u003e Color: Transparent with a slight yellowish glow\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eProcessing instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Mix components A and B carefully in a ratio of 100:100 (1:1 by weight) by hand or machine.\u003c\/li\u003e\n\n\u003cli\u003e Stir slowly in a figure-8 motion to avoid entraining air.\u003c\/li\u003e\n\n\u003cli\u003e Process the mixture within the pot life of 30 minutes\u003c\/li\u003e\n\n\u003cli\u003e Wait until the whole has completely hardened before de-moulding (3-5 hours at 20°C)\u003c\/li\u003e\n\n\u003cli\u003e Curing can be accelerated by heating - every 10°C increase in temperature roughly halves the time\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003cp\u003e \u003cstrong\u003eCustomization options:\u003cmeta charset=\"UTF-8\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e \n\u003cstrong\u003eReduce hardness:\u003c\/strong\u003e Add \u003ca href=\"https:\/\/siliconesandmore.com\/collections\/siliconen-olie-polydimethylsiloxanen-olie\"\u003esilicone oil\u003c\/a\u003e (note: migrates to surface over time)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eThickening for spatula:\u003c\/strong\u003e Add \u003ca href=\"https:\/\/siliconesandmore.com\/products\/thixo-a?variant=49489539498325\"\u003eSilicone Thixo A\u003c\/a\u003e or \u003ca href=\"https:\/\/siliconesandmore.com\/products\/vulstof-fumed-silica?variant=49531888075093\"\u003efumed silica\u003c\/a\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eColoring:\u003c\/strong\u003e Use \u003ca href=\"https:\/\/siliconesandmore.com\/products\/siliconen-kleurstof\"\u003esilicone colorant\u003c\/a\u003e for intense colors\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003cstrong\u003eSilicones and More\u003c\/strong\u003e supplies high-quality silicones for professional mould making, SFX, industrial applications and strong end products.\u003c\/p\u003e\n\n\u003ch3\u003e Important Warning: Inhibition with Additive Silicones\u003c\/h3\u003e\n\n \u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is an addition silicone (platinum cure). These silicones can be poisoned by sulfur, nitrogen, amino compounds, and metal salts. If you're unsure whether the products you use (including gloves, spatulas, and cups) contain these ingredients, perform a small test first. These substances are found in many latex gloves, some plastilines, paints and adhesives, condensation silicones, one-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography). If you do decide to use it, you will need to apply a protective layer of \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\"\u003epolyvinyl alcohol (PVA)\u003c\/a\u003e .\u003c\/p\u003e\n\n\u003ch3\u003e Professional Support\u003c\/h3\u003e\n\n \u003cp\u003eOur technical specialists advise on material selection, processing techniques, coloring, and optimal results for your specific mold or end product application. Contact us for technical data sheets, processing guidelines, or advice on inhibition prevention with addition silicones.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49531857961301,"sku":"S10727","price":28.95,"currency_code":"EUR","in_stock":true},{"title":"2 kg set","offer_id":49531858026837,"sku":"S10728","price":53.75,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531858059605,"sku":"S11603","price":262.0,"currency_code":"EUR","in_stock":true},{"title":"50 kg set","offer_id":49531858125141,"sku":"S11708","price":1196.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-additie-kleurloos-25-platinum-silicone-voor-49051663204693.png?v=1772190384"},{"product_id":"siliconenschuim-gesloten-cel-5","title":"Silicone foam Closed Cell 5","description":"\u003cp\u003eThe Silicone Foam Closed Cell 5 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 5 times its volume. This silicone can of course also be colored with silicone dye.\u003cbr \/\u003e\u003cbr \/\u003eThis silicone is used for filling seat cushions, for props and decor and for filling flexible objects and bras, pillows and mattresses, etc. Foam plates\/foam mats are also made with this silicone. Silicone foam is also suitable for sealing electronics and Lithium batteries (application testing is necessary).\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh frothing\u003c\/li\u003e\r\n\u003cli\u003eReturns well to intended shape after pressing\u003c\/li\u003e\r\n\u003cli\u003eHigh temperature and chemical resistance\u003c\/li\u003e\r\n\u003cli\u003eEasy to process\u003c\/li\u003e\r\n\u003cli\u003eUniform\/well distributed density over the entire casting.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio by weight: A:B = 100:100\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (pot life) at 25°C: 2 minutes\u003c\/li\u003e\r\n\u003cli\u003eDemoulding time at 25°C: 1 hours\u003c\/li\u003e\r\n\u003cli\u003eViscosity at 20°C: 5.000 mPa S\u003c\/li\u003e\r\n\u003cli\u003eColour: Whitish, colourless\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore C 7 (Shore A 20) depending on foaming\u003c\/li\u003e\r\n\u003cli\u003eDensity at 20°C: 0.175 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eFrothing factor in volume: 5\u003c\/li\u003e\r\n\u003cli\u003eClosed Cells\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003ePlease note: Pot life\/demoulding time is highly dependent on temperature! At a higher temperature, the processing time and demoulding time become shorter. Frothing factor is highly dependent on temperature. Process the product at the indicated temperature to obtain the described properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThese silicones can easily be mixed by hand or machine. Mix the A and B components carefully and in the indicated ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and wait until it has completely hardened before demoulding. You can possibly speed up the curing process by heating the whole thing. Every 10 degrees the time roughly halves. Please note that in this case air bubbles will have less time to escape.\u003cbr \/\u003e\u003cbr \/\u003ePlease note, the faster the silicone hardens, the less the foam effect. The silicone hardens faster at higher temperatures, so the foam effect cannot fully occur. Silicone that is too cold also gives a less good result because the foam formation starts to collapse again.\u003cbr \/\u003eSo preferably process the silicone at room temperature.\u003c\/p\u003e\r\n\u003cp\u003eWorking in a closed mold produces a more uniform foam mass.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can color the silicone intensely with \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-kleurstof\"\u003esilicone dye\u003c\/a\u003e .\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note: This is a silicone addition. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you are using (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and glues, condensation silicone, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e .\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least one year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you frequently work with silicone, it is recommended to wear gloves during processing and to ventilate the area well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"DE - Produktinformationen Silikonzusatz Farblos 5\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Siliconen Additie Kleurloos 5.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Silicone foam Closed Cell 5.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product information Silicone foam Closed Cell 5.pdf\" rel=\"noreferrer\"\u003eEN - Product information Silicone foam Closed Cell 5.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49531858190677,"sku":"S11664","price":34.0,"currency_code":"EUR","in_stock":false},{"title":"2 kg set","offer_id":49531858223445,"sku":"S11662","price":62.17,"currency_code":"EUR","in_stock":false},{"title":"10 kg set","offer_id":49531858256213,"sku":"S11663","price":313.09,"currency_code":"EUR","in_stock":false},{"title":"40 kg (20 kg A + 20 kg B)","offer_id":50636971311445,"sku":"S82029","price":1208.04,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-schuim-gesloten-cel-5-48098033893717.png?v=1757509661"},{"product_id":"siliconen-schuim-gesloten-cel-3","title":"Silicone foam Closed Cell 3","description":"\u003cp\u003eThe Silicone Foam Closed Cell 3 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 3 times the volume. This silicone can of course also be colored with silicone dye.\u003cbr \/\u003e\u003cbr \/\u003eThis silicone is used for filling seat cushions, for props and decor and for filling flexible objects and bras, pillows and mattresses, etc. Foam plates\/foam mats are also made with this silicone. Silicone foam is also suitable for sealing electronics and lithium batteries (application testing is necessary).\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh frothing\u003c\/li\u003e\r\n\u003cli\u003eReturns well to intended shape after pressing\u003c\/li\u003e\r\n\u003cli\u003eHigh temperature and chemical resistance\u003c\/li\u003e\r\n\u003cli\u003eEasy to process\u003c\/li\u003e\r\n\u003cli\u003eUniform\/well distributed density over the entire casting.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio by weight: A:B = 100:100\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (pot life) at 25°C: 3 minutes\u003c\/li\u003e\r\n\u003cli\u003eDemoulding time at 25°C: 50 minutes\u003c\/li\u003e\r\n\u003cli\u003eViscosity at 20°C: 14,000 mPa S\u003c\/li\u003e\r\n\u003cli\u003eColour: Whitish, colourless\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore C 2-50 (Shore A 30-85) depending on foaming\u003c\/li\u003e\r\n\u003cli\u003eDensity at 20°C: 0.352 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eFrothing factor in volume: 3\u003c\/li\u003e\r\n\u003cli\u003eClosed Cells\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003ePlease note: Pot life\/demoulding time is highly dependent on temperature! At a higher temperature, the processing time and demoulding time become shorter. Frothing factor is highly dependent on temperature. Process the product at the indicated temperature to obtain the described properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThese silicones can easily be mixed by hand or machine. Mix the A and B components carefully and in the indicated ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and wait until it has completely hardened before demoulding. You can possibly speed up the curing process by heating the whole thing. Every 10 degrees the time roughly halves. Please note that in this case air bubbles will have less time to escape.\u003cbr \/\u003e\u003cbr \/\u003ePlease note, the faster the silicone hardens, the less the foam effect. The silicone hardens faster at higher temperatures, so the foam effect cannot fully occur. Silicone that is too cold also gives a less good result because the foam formation starts to collapse again.\u003cbr \/\u003eSo preferably process the silicone at room temperature.\u003c\/p\u003e\r\n\u003cp\u003eWorking in a closed mold produces a more uniform foam mass.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can color the silicone intensely with \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-kleurstof\"\u003esilicone dye\u003c\/a\u003e .\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note: This is a silicone addition. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you are using (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and glues, condensation silicone, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e .\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least one year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you frequently work with silicone, it is recommended to wear gloves during processing and to ventilate the area well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"DE - Produktinformationen Silikonzusatz Farblos 5\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Siliconen Additie Kleurloos 5.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Silicone foam Closed Cell 3.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product information Silicone foam Closed Cell 3.pdf\" rel=\"noreferrer\"\u003eEN - Product information Silicone foam Closed Cell 3.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49531858288981,"sku":"S11623","price":31.71,"currency_code":"EUR","in_stock":false},{"title":"2 kg set","offer_id":49531858321749,"sku":"S11624","price":56.09,"currency_code":"EUR","in_stock":false},{"title":"10 kg set","offer_id":49531858354517,"sku":"S11625","price":272.92,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-schuim-gesloten-cel-3-48098033860949.png?v=1757509661"},{"product_id":"siliconenschuim-open-cel-7-smeerbaar","title":"Silicone foam Open Cell 7 - Spreadable","description":"\u003cp\u003eThe Silicone Foam Open Cell 7 Spreadable is a 2-component (Platinum) Poly-Addition casting silicone that cures at \u003cstrong\u003eelevated temperature\u003c\/strong\u003e and foams up to 7 times its volume. This silicone can of course also be colored with silicone dye. This is a thicker version of the regular Silicone Foam Open Cell 7. The increased temperature is necessary for a better foam effect.\u003cbr \/\u003e\u003cbr \/\u003eThis silicone is used for filling seat cushions, for props and decor and for filling flexible objects and bras, etc. Foam plates\/foam mats are also made with this silicone. Silicone foam is also suitable for sealing Lithium batteries (application testing is necessary).\u003c\/p\u003e\r\n\u003cp\u003eThe spreadability makes this silicone better suited for the production of foamed sheets than the more fluid version.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh frothing\u003c\/li\u003e\r\n\u003cli\u003eReturns well to intended shape after compression\u003c\/li\u003e\r\n\u003cli\u003eHigh temperature and chemical resistance\u003c\/li\u003e\r\n\u003cli\u003eEasy to process\u003c\/li\u003e\r\n\u003cli\u003eUniform\/well distributed density over the entire casting.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio by weight: A:B = 100:100\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (pot life) at 25°C: 2 minutes\u003c\/li\u003e\r\n\u003cli\u003eDemoulding time at 100°C: 70 minutes\u003c\/li\u003e\r\n\u003cli\u003eViscosity at 20°C: 50.000 mPa s\u003c\/li\u003e\r\n\u003cli\u003eColour: Whitish, colourless\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore C 5-10 (Shore A 20-30) depending on foaming\u003c\/li\u003e\r\n\u003cli\u003eDensity at 20°C: 0.162 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eOpschium factor in volume: 7\u003c\/li\u003e\r\n\u003cli\u003eFlame retardant UL94-V0\u003c\/li\u003e\r\n\u003cli\u003eOpenCell\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003ePlease note: Pot life\/demoulding time is highly dependent on temperature! At a higher temperature, the processing time and demoulding time become shorter. Frothing factor is highly dependent on temperature. Process the product at the indicated temperature to obtain the described properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThese silicones can easily be mixed by hand or machine. Mix the A and B components carefully and in the indicated ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and wait until it has completely hardened before demoulding. The foaming effect only works at elevated temperatures (From 60 \u003csup\u003eo\u003c\/sup\u003eC)\u003c\/p\u003e\r\n\u003cp\u003e\u003cbr \/\u003ePlease note, the faster the silicone hardens, the less the foam effect. The silicone hardens faster at higher temperatures, so the foam effect cannot fully occur. Silicone that is too cold also gives a less good result because the foam formation then starts to collapse again.\u003cbr \/\u003eSo preferably process the silicone at the indicated temperature.\u003c\/p\u003e\r\n\u003cp\u003eWorking in a closed mold produces a more uniform foam mass.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can color the silicone intensely with \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-kleurstof\"\u003esilicone dye\u003c\/a\u003e .\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note: This is a silicone addition. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you are using (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and glues, condensation silicone, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e .\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least one year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you work frequently with silicone, it is recommended to wear gloves during processing and to ventilate the area well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"DE - Produktinformationen Silikonzusatz Farblos 5\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Siliconen Additie Kleurloos 5.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"EN - Product information Silicone foam Open Cell 7 - Spreadable.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product information Silicone foam Open Cell 7 - Spreadable.pdf\" rel=\"noreferrer\"\u003eEN - Product information Silicone foam Open Cell 7 - Spreadable.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49531858583893,"sku":"S11569","price":31.71,"currency_code":"EUR","in_stock":true},{"title":"2 kg set","offer_id":49531858616661,"sku":"S11570","price":56.09,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531858649429,"sku":"S11571","price":272.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-schuim-open-cel-7-smeerbaar-48098033566037.png?v=1757509661"},{"product_id":"siliconenschuim-open-cel-6","title":"Silicone foam Open Cell 6","description":"\u003cp\u003eThe Silicone Foam Open Cell 6 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 6 times its volume. This silicone can of course also be colored with silicone dye.\u003cbr \/\u003e\u003cbr \/\u003eThis silicone is used for filling seat cushions, for props and decor and for filling flexible objects and bras, etc. Foam plates\/foam mats are also made with this silicone. Silicone foam is also suitable for sealing Lithium batteries (application testing is necessary).\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eHigh frothing\u003c\/li\u003e\r\n\u003cli\u003eReturns well to intended shape after compression\u003c\/li\u003e\r\n\u003cli\u003eHigh temperature and chemical resistance\u003c\/li\u003e\r\n\u003cli\u003eEasy to process\u003c\/li\u003e\r\n\u003cli\u003eUniform\/well distributed density over the entire casting.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio by weight: A:B = 100:100\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (pot life) at 25°C: 2 minutes\u003c\/li\u003e\r\n\u003cli\u003eDemoulding time at 25°C: 2 hours\u003c\/li\u003e\r\n\u003cli\u003eViscosity at 20°C: 8.000 mPa S\u003c\/li\u003e\r\n\u003cli\u003eColour: Whitish, colourless\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore C 6 (Shore A 20-30) depending on foaming\u003c\/li\u003e\r\n\u003cli\u003eDensity at 20°C: 0.193 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eFoam factor in volume: 6\u003c\/li\u003e\r\n\u003cli\u003eOpenCell\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003ePlease note: Pot life\/demoulding time is highly dependent on temperature! At a higher temperature, the processing time and demoulding time become shorter. Frothing factor is highly dependent on temperature. Process the product at the indicated temperature to obtain the described properties.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThese silicones can easily be mixed by hand or machine. Mix the A and B components carefully and in the indicated ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and wait until it has completely hardened before demoulding. You can possibly speed up the curing process by heating the whole thing. Every 10 degrees the time roughly halves. Please note that in this case air bubbles will have less time to escape.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003ePlease note, the faster the silicone hardens, the less the foam effect. The silicone hardens faster at higher temperatures, so the foam effect cannot fully occur. Silicone that is too cold also gives a less good result because the foam formation starts to collapse again.\u003cbr \/\u003eSo preferably process the silicone at room temperature.\u003c\/p\u003e\r\n\u003cp\u003eWorking in a closed mold produces a more uniform foam mass.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eYou can color the silicone intensely with \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-kleurstof\"\u003esilicone dye\u003c\/a\u003e .\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note: This is a silicone addition. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you are using (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and glues, condensation silicone, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e .\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least one year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you work frequently with silicone, it is recommended to wear gloves during processing and to ventilate the area well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"DE - Produktinformationen Silikonzusatz Farblos 5\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Siliconen Additie Kleurloos 5.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"EN - Product information Silicone foam Open Cell 6.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product information Silicone foam Open Cell 6.pdf\" rel=\"noreferrer\"\u003eEN - Product information Silicone foam Open Cell 6.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 kg set","offer_id":49531858682197,"sku":"S11675","price":34.08,"currency_code":"EUR","in_stock":false},{"title":"2 kg set","offer_id":49531858714965,"sku":"S11676","price":63.74,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531858747733,"sku":"S11677","price":311.94,"currency_code":"EUR","in_stock":false},{"title":"40 kg (20 kg A + 20 kg B)","offer_id":50636971344213,"sku":"S82027","price":1206.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-schuim-open-cel-6-48098033926485.png?v=1757509661"},{"product_id":"elastosilr-c-1200-ab","title":"Wacker Elastosil® C 1200 A\/B – Blue Addition Silicone for Vacuum Bags \u0026 Composite Mold Making","description":"\u003ch2\u003ePremium Sprayable Addition Silicone for Professional Vacuum Bag and Composite Mold Making Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Elastosil® C 1200 A\/B\u003c\/strong\u003e is a two-component, platinum-catalyzed addition-curing RTV-2 silicone, developed for the industrial production of reusable vacuum bags in the composites industry. The silicone has a low viscosity (8,000 mPa·s mixed) and is shear-thinning: self-leveling on horizontal surfaces, but stays put on vertical walls without running. It can be processed by brushing, spraying, or pouring. With a Shore A hardness of 25, a tensile strength of 5.0 N\/mm², and an elongation at break of 500%, the material combines flexibility with the mechanical strength required for hundreds of vacuum cycles. Mix ratio 1:1 by weight, pot life 20 minutes, demoldable after 60 minutes at room temperature. The blue color of component B provides visual mixing control. Resistant to epoxy and polyester resins.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 25\u003c\/strong\u003e – flexible enough to conform to complex shapes and be repeatedly rolled for transport and reuse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength 5.0 N\/mm² and tear strength 25 N\/mm\u003c\/strong\u003e – high mechanical load capacity for industrial vacuum cycles, measured according to ISO 37 and ASTM D 624 B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life 20 minutes, demoldable after 60 minutes\u003c\/strong\u003e – ample processing time for large surfaces combined with fast production turnaround\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eViscosity 8,000 mPa·s with shear-thinning behavior\u003c\/strong\u003e – self-leveling on horizontal surfaces and stable on vertical walls without sagging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo chemical shrinkage\u003c\/strong\u003e – dimensionally stable molds and bags, critical for reproducible composite production\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistant to epoxy and polyester resins\u003c\/strong\u003e – suitable for common reproduction and infusion materials in the composites industry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReusable vacuum bags for resin infusion of glass and carbon fiber\u003c\/li\u003e\n\u003cli\u003eComposite panels for commercial vehicles, trains, and buses\u003c\/li\u003e\n\u003cli\u003eAircraft and shipbuilding with fiber-reinforced plastics\u003c\/li\u003e\n\u003cli\u003eLarge-scale mold making for serial composite parts\u003c\/li\u003e\n\u003cli\u003eSpray-up production of vacuum bags on large and complex shapes\u003c\/li\u003e\n\u003cli\u003eIndustrial infusion processes with epoxy and polyester systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTarget Audience\u003c\/h3\u003e\n\u003cp\u003eThis product is developed for industrial processors in the composites industry and is not intended for general mold making or hobby applications. The material costs, processing equipment (spray or dosing unit), and post-curing at operating temperature make the product economically viable for serial composite production.\u003c\/p\u003e\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eBriefly stir components A and B separately before processing.\u003c\/li\u003e\n\u003cli\u003eMix A and B in a weight ratio of 1:1. \u003cstrong\u003eImportant:\u003c\/strong\u003e only process components A and B with the same batch number. Component A contains the platinum catalyst. The manufacturer excludes combinations of different batch numbers.\u003c\/li\u003e\n\u003cli\u003eMix slowly and evenly until a homogeneous blue color is achieved, either mechanically or via a static mixer in the dual cartridge.\u003c\/li\u003e\n\u003cli\u003eOptional vacuuming for casting applications to remove air inclusions.\u003c\/li\u003e\n\u003cli\u003eProcess within 20 minutes. Application can be done via a manual or pneumatic cartridge gun with a static mixer, a 2-component mixing and dosing machine, or via compressed air spraying for large surfaces. For small or free-form applications, brush application is also possible.\u003c\/li\u003e\n\u003cli\u003eAllow to cure at room temperature: demoldable after 60 minutes, fully cured after 24 hours at 23 °C.\u003c\/li\u003e\n\u003cli\u003eFor maximum dimensional stability of the vacuum bag: post-cure for 2 to 3 hours at the intended operating temperature, up to a maximum of 220 °C.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv style=\"background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 15px; border-radius: 8px; margin: 20px 0;\"\u003e\n\u003cstrong\u003e⚠️ Inhibition warning for addition silicone\u003c\/strong\u003e\u003cbr\u003ePlatinum-catalyzed addition-curing silicones are sensitive to inhibition. Avoid contact with: condensation silicones or their residues, latex and natural rubber, sulfur-containing clay, uncured polyester resin, tin compounds, and amine-containing substances. If in doubt, always test a small area before starting the full application.\u003c\/div\u003e\n\u003ch3\u003eAbout Wacker Chemie AG\u003c\/h3\u003e\n\u003cp\u003eWacker Chemie AG is a global market leader in the development and production of silicones for industrial and technical applications. The Elastosil® C series is specifically developed for the composites industry and is used worldwide in vacuum bag technology for production processes where reproducibility and long service life are critical.\u003c\/p\u003e\n\u003ch3\u003ePackaging and cartridges\u003c\/h3\u003e\n\u003cp\u003eSilicones and More offers Elastosil® C 1200 A\/B in 10 kg kits, 40 kg kits, and in 1.5 kg dual cartridges. \u003cstrong\u003ePlease note:\u003c\/strong\u003e the dual cartridges we produce are not identical to Wacker's original cartridges. For the cartridge variant, you may need a different \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/dispenser-manueel-mixpac-dm-1500-01\"\u003edispenser gun\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eStorage\u003c\/h3\u003e\n\u003cp\u003eStore cool and dry in the original packaging. The best-before date is on the product label. Storage beyond this date does not automatically mean the product is unusable — in this case, check the critical properties for your application before using the material in production.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you working on a specific composite or vacuum bag application and want to know if Elastosil® C 1200 A\/B is the right choice for your project? Our technical specialists are happy to assist with material selection, process steps, and alternatives within the Wacker portfolio. Contact us via chat, email, or phone.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"10 kg. Set (5 A + 5 B) ","offer_id":49531859108181,"sku":"S11430","price":453.66,"currency_code":"EUR","in_stock":true},{"title":"40 kg. Set (20A + 20B)   ","offer_id":49531859140949,"sku":"S11562","price":1731.44,"currency_code":"EUR","in_stock":false},{"title":"Double cartridge   [1,5 Kg]","offer_id":49531859173717,"sku":"S11600","price":90.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-c-1200-ab-blauwe-additie-silicone-voor-vac-48098033992021.png?v=1779890685"},{"product_id":"elastosil-rt-602","title":"Wacker ELASTOSIL® RT 602 A\/B – Light Gray Addition-Curing Silicone Rubber for Electronics \u0026 Sensor Encapsulation","description":"\u003ch2\u003ePremium Heat-Resistant Potting Silicone for Professional Electronics and Sensor Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® RT 602 A\/B\u003c\/strong\u003e is a pourable, addition-curing two-component silicone rubber (RTV-2) that cures at room temperature or accelerated at elevated temperature. The material has a low mixed viscosity of 3,500 mPa·s, a final hardness of Shore A 30 and a light gray final color. The mixing ratio is 9:1 (A:B) by weight, with the platinum catalyst in component A and the crosslinker in component B — use only components with the same lot number. With a pot life of approximately 80 minutes, a cure time of 24 hours at 23°C (accelerated to 5 minutes at 150°C) and excellent heat stability, this is a reliable all-round potting compound for the encapsulation of electronics and sensors.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow mixed viscosity 3,500 mPa·s:\u003c\/strong\u003e flows well around components and fills fine details – ideal for fully encapsulating circuit boards and sensors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness Shore A 30:\u003c\/strong\u003e flexible yet firm cure – provides mechanical protection without becoming brittle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot life approximately 80 minutes at 23°C:\u003c\/strong\u003e generous working time – sufficient time for pouring and vacuum degassing of larger or complex parts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVolume resistivity 10¹⁵ Ohm·cm:\u003c\/strong\u003e high electrical insulation – exceptionally suitable for insulating and encapsulating electrical circuits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRapid heat cure down to 5 minutes at 150°C:\u003c\/strong\u003e strongly temperature-dependent curing – enables efficient series production.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcellent heat stability:\u003c\/strong\u003e retains its properties under prolonged thermal load – suitable for demanding electronics applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eEncapsulation and potting of electronic circuit boards\u003c\/li\u003e\n  \u003cli\u003eProtection of sensors in automotive electronics\u003c\/li\u003e\n  \u003cli\u003eMeasurement and control technology and sensor technology\u003c\/li\u003e\n  \u003cli\u003eAll-round potting compound for electrical components\u003c\/li\u003e\n  \u003cli\u003eManufacture of cast technical articles\u003c\/li\u003e\n  \u003cli\u003eApplications with combined thermal and mechanical load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003eStir component A (light gray, 5,000 mPa·s) and component B (transparent, 200 mPa·s) thoroughly and separately before use to evenly disperse any settled filler.\u003c\/li\u003e\n  \u003cli\u003eAccurately weigh the components in a ratio of 9 parts A to 1 part B (by weight). Use only components A and B with the same lot number.\u003c\/li\u003e\n  \u003cli\u003eMix both components thoroughly into a homogeneous mass. Tools that have been in contact with the platinum-containing component A must not come into contact with the crosslinker component B, as even traces of platinum can cause component B to gel.\u003c\/li\u003e\n  \u003cli\u003eOptionally degas the mixture under vacuum to remove trapped air. This is recommended when encapsulating components.\u003c\/li\u003e\n  \u003cli\u003ePour the mixture within the pot life of approximately 80 minutes (at 23°C).\u003c\/li\u003e\n  \u003cli\u003eAllow to cure: approximately 24 hours at 23°C, or accelerated 20 minutes at 70°C, 10 minutes at 100°C or 5 minutes at 150°C (layer thickness 1 cm). Cure time depends strongly on the temperature, size and heat-sink properties of the potted part; run preliminary tests to optimize conditions.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eManufactured by \u003cstrong\u003eWacker Chemie AG\u003c\/strong\u003e, the world market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Warning: Inhibition of Addition-Curing Silicones\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is an addition-curing silicone (platinum cure). All surfaces must be clean and free of contaminants that inhibit curing. Inhibiting substances include sulfur-containing materials, plasticizers, urethanes, amine-containing materials and organometallic compounds — particularly organotin compounds. If a substrate's ability to inhibit cure is unknown, run a small-scale test first to determine compatibility.\u003c\/p\u003e\n\n\u003ch3\u003ePackaging and Storage\u003c\/h3\u003e\n\n\u003cp\u003eThe 'best use before end' date of each batch is shown on the product label. Storage beyond this date does not automatically mean the product is no longer usable; in that case, check the required properties for quality assurance reasons. Store in a dry and cool place.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\n\u003cp\u003eELASTOSIL® RT 602 A\/B is a proven all-round potting compound for professionals who require reliable, heat-resistant encapsulation of electronics and sensors. Unsure about the right curing conditions or dosage for your application? Contact us for technical data sheets, processing guides or product advice.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1kg. Set (0.9 kg. A + 0.1 kg. B)","offer_id":49531859239253,"sku":"S11689","price":74.0,"currency_code":"EUR","in_stock":false},{"title":"5 kg. Set (4.5 kg. A + 0.5 kg. B)","offer_id":49531859304789,"sku":"S11690","price":358.61,"currency_code":"EUR","in_stock":false},{"title":"20 kg. Set (18A + 2 B)","offer_id":49531859370325,"sku":"S11691","price":1419.9,"currency_code":"EUR","in_stock":true},{"title":"30kg. Set (27A + 3 B) Quotation request","offer_id":49531859435861,"sku":"A10179 + A10180","price":2087.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-rt-602-ab-lichtgrijs-additie-siliconenrubb-48098034450773.jpg?v=1780995921"},{"product_id":"stensil-eco-60-orange","title":"Silconic Stencil ECO 60 Orange – Kneadable Silicone for Mold Making \u0026 Jewelry","description":"\u003ch2\u003ePremium Medium-Hard Kneadable Silicone for Professional Mold Making and Jewelry Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eStensil ECO 60\u003c\/strong\u003e is a 2-component platinum addition kneadable silicone (Shore A 60) that cures at room temperature. The orange paste is easily mixed by hand in a 1:1 weight ratio and offers a fast production cycle with a pot life of 1.5 minutes and a demolding time of 5 minutes. Its Shore A 60 hardness makes this variant extremely suitable for firmer molds, jewelry production, model making, and industrial reproduction where more rigidity is desired than with the softer ECO 30 or 50 variants.\u003c\/p\u003e\n\n\u003ch3\u003eKey Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 60 – \u003c\/strong\u003e medium-hard version that offers more pressure resistance for hard objects and heavier casting materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemolding time 5 minutes – \u003c\/strong\u003e fast curing at 20°C for high production speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage \u0026lt;0.1% – \u003c\/strong\u003e dimensionally accurate reproductions for precision applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 1.64 g\/cm³ – \u003c\/strong\u003e stable paste for vertical models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:1 mixing ratio by weight – \u003c\/strong\u003e easy manual mixing without equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance – \u003c\/strong\u003e reasonably resistant to acidic and more aggressive substances for repeated use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry production – \u003c\/strong\u003e sturdy molds for metal and resin casting of rings, pendants, and miniatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMold making – \u003c\/strong\u003e durable reproduction molds for medium-hard to hard materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel making \u0026amp; prototyping – \u003c\/strong\u003e accurate reproductions with good dimensional stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestoration \u0026amp; reproduction – \u003c\/strong\u003e ornaments, fittings, and historical details.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDental technology – \u003c\/strong\u003e firm control bites and insulation layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial small series – \u003c\/strong\u003e reproduction of technical parts with more rigidity.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTake equal parts of A and B components by weight (1:1).\u003c\/li\u003e\n\u003cli\u003eKnead both components carefully by hand until a uniform orange color is achieved.\u003c\/li\u003e\n\u003cli\u003eProcess the mixed paste within the 1.5-minute pot life.\u003c\/li\u003e\n\u003cli\u003ePress the silicone over or around the model and wait 5 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eDemold once the silicone has fully cured and no longer feels sticky.\u003c\/li\u003e\n\u003cli\u003eFull strength is reached after 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eAddition-cure silicone warning:\u003c\/strong\u003e Stensil ECO is a platinum-cure silicone that can be poisoned by sulfur, nitrogen, amine compounds, and metal salts. These substances are found, among others, in many latex gloves, some plasticines, varnishes, glues, condensation-cure silicones, 1-component silicone sealant, natural rubbers, and 3D printing materials (especially stereolithography\/SLA). If in doubt, test on a small area first or apply a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilconic GmbH \u0026amp; Co. KG\u003c\/strong\u003e is a German manufacturer of high-quality silicone elastomers with production in Lonsee. Since 2004, the company has been developing dental silicones under its own brands and is one of the leading producers of RTV-2 silicones in Europe.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eDoes your application require Shore A 60, or would a harder ECO 70 be a better fit? Our team is happy to help you make the right choice. Contact us via our website for personalized advice.\u003c\/p\u003e","brand":"Silconic","offers":[{"title":"500 Gr. set","offer_id":49531859698005,"sku":"S11451","price":21.0,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531859730773,"sku":"S11456","price":245.97,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/silconic-silconic-stensil-eco-60-oranje-kneedbare-silicone-voor-mall-48098035073365.png?v=1774965933"},{"product_id":"elastosil-rt-601","title":"Wacker Elastosil® RT 601 A\/B – Transparent Addition Curing Silicone for Electronics \u0026 Potting","description":"\u003ch2\u003ePremium Transparent Addition Silicone for Professional Electronics Encapsulation and Potting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eELASTOSIL® RT 601 A\/B\u003c\/strong\u003e is a pourable, addition-curing (platinum-cure) two-component silicone rubber that vulcanizes at room temperature (RTV-2). The cured rubber is crystal clear and transparent, has a medium hardness of Shore A 45, and a low mixed viscosity of 3,500 mPa·s, giving the material excellent flow properties and good self-deaeration. With a generous working time of approximately 90 minutes, a mixing ratio of 9:1 by weight, and an excellent tensile strength of 6 N\/mm², this is the ideal choice for transparent potting and protection of electronic components, sensors, and optical parts.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrystal clear transparency\u003c\/strong\u003e – fully transparent vulcanizate that maintains visibility of potted components, ideal for optical and inspectable applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness Shore A 45\u003c\/strong\u003e – medium hardness that provides protection while remaining flexible enough to absorb mechanical stresses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength 6 N\/mm² and elongation at break 100%\u003c\/strong\u003e – strong and resilient vulcanizate that tolerates vibrations and thermal expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed viscosity 3,500 mPa·s\u003c\/strong\u003e – low viscosity for excellent flow around fine components and easy deaeration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking time approximately 90 minutes\u003c\/strong\u003e – generous pot life that allows for comfortable work on larger or complex potting tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume resistivity 10¹⁵ Ohm·cm\u003c\/strong\u003e – excellent electrical insulation for the protection of electronic circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eEncapsulation (potting) of electronic components and circuit boards.\u003c\/li\u003e\n\u003cli\u003eProtection of automotive electronics against vibrations and moisture.\u003c\/li\u003e\n\u003cli\u003ePotting of sensors and measurement and control technology.\u003c\/li\u003e\n\u003cli\u003eOptical measuring systems and transparent optical applications.\u003c\/li\u003e\n\u003cli\u003eAll-round potting compound for industrial electronics.\u003c\/li\u003e\n\u003cli\u003eManufacturing of molded articles where transparency is desired.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir component A and component B thoroughly separately before weighing.\u003c\/li\u003e\n\u003cli\u003eWeigh in a weight ratio of 9:1 (A:B). Important: exclusively use A and B components with the same lot number. The platinum catalyst is in component A, the crosslinker in component B.\u003c\/li\u003e\n\u003cli\u003eMix A and B thoroughly until a homogeneous mixture is achieved. Tools that have come into contact with platinum-containing component A should not be introduced into component B, to prevent premature gelling.\u003c\/li\u003e\n\u003cli\u003eDe-aerate the mixture under vacuum to remove trapped air, especially when potting fine components.\u003c\/li\u003e\n\u003cli\u003ePour within the pot life of approximately 90 minutes. Reactivity can be adjusted with Catalyst EP (faster) or Inhibitor PT 88 (slower).\u003c\/li\u003e\n\u003cli\u003eAllow to cure: approximately 24 hours at 23°C, or accelerated 20 minutes at 70°C or 10 minutes at 100°C.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eInhibition in Addition Curing\u003c\/h3\u003e\u003cp\u003eELASTOSIL® RT 601 A\/B is an addition-curing (platinum) silicone and is therefore sensitive to inhibition. Sulfur-containing materials, plasticizers, urethanes, amine-containing materials, and organometallic compounds (especially organotin compounds) can inhibit or prevent curing. If in doubt about a substrate, always perform a small-scale test first.\u003c\/p\u003e\u003ch3\u003eAbout the Manufacturer\u003c\/h3\u003e\u003cp\u003eWacker Chemie AG is a global market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\u003ch3\u003eProfessional Support\u003c\/h3\u003e\u003cp\u003eDo you need advice on the correct processing, curing time, or application for your potting or encapsulation project? Feel free to contact us – our specialists will be happy to assist you.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1kg. Set (0.9 kg. A + 0.1 kg. B)","offer_id":49531859763541,"sku":"S11680","price":125.78,"currency_code":"EUR","in_stock":false},{"title":"5 kg. Set (4.5 kg. A + 0.5 kg. B)","offer_id":49531859796309,"sku":"S11681","price":598.95,"currency_code":"EUR","in_stock":false},{"title":"20 kg. Set (18A + 2 B)","offer_id":49531859861845,"sku":"S11682","price":2276.0,"currency_code":"EUR","in_stock":false},{"title":"30kg. Set (27A + 3 B) Quotation request","offer_id":49531859894613,"sku":"A10179 + A10180","price":3242.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-rt-601-ab-transparante-additie-silicone-vo-48098034516309.jpg?v=1779959166"},{"product_id":"wacker-elastosil-n2010","title":"Wacker ELASTOSIL® N2010 – Neutral Silicone Adhesive for Electronics \u0026 Industrial Assembly","description":"\u003ch2\u003ePremium Silicone Adhesive for Professional Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eELASTOSIL® N2010\u003c\/strong\u003e is a ready-to-use, neutral (alkoxy) RTV-1 silicone rubber from Wacker Chemie AG. This one-component system bonds primer-free to a wide range of substrates and offers lasting elasticity over a temperature range of -50 °C to +180 °C — ideal for demanding electronics and industrial applications.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeutral curing (alkoxy):\u003c\/strong\u003e No acidic by-products, safe for sensitive electronics and metal contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimerless adhesion:\u003c\/strong\u003e Adheres directly to plastics, metals, glass, and ceramics without pre-treatment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e Remains elastic from -50 °C to +180 °C after curing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSprayable and dispensable:\u003c\/strong\u003e Liquid consistency allows processing via spraying, dipping, and dispensing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free:\u003c\/strong\u003e No hazardous solvents; safe for use in enclosed spaces and with sensitive components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV and weather resistant:\u003c\/strong\u003e Excellent resistance to aging, moisture, and UV radiation for long-lasting performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics:\u003c\/strong\u003e Bonding and sealing of printed circuit boards, sensors, and measurement and control equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive electronics:\u003c\/strong\u003e Sealing of connectors, housings, and electronic modules in vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousehold appliances:\u003c\/strong\u003e Assembly and sealing of (small) household appliances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial assembly:\u003c\/strong\u003e Connecting components in production and assembly lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrototyping \u0026amp; R\u0026amp;D:\u003c\/strong\u003e Flexible adhesive for test setups and laboratory applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing \u0026amp; caulking:\u003c\/strong\u003e Watertight sealing of connections and penetrations in industrial environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Characteristics\u003c\/h3\u003e\n\u003cp\u003eELASTOSIL® N2010 is a 1-component RTV silicone rubber (condensation cure, alkoxy) with a Shore A hardness of 25 after curing. The viscosity is approximately 10,000 mPa·s (D=0.5 1\/s), with a skin formation time of about 20 minutes at 23 °C and 50% relative humidity. Tensile strength: 1 N\/mm²; elongation: 200%. Cured density: 1.01 g\/cm³. Curing occurs through moisture from the air; full curing depends on layer thickness and ambient conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie AG \u003c\/strong\u003eis a globally leading manufacturer of silicones and polymer chemicals, with decades of expertise in high-performance silicone solutions for industry, electronics, and automotive. ELASTOSIL® is a proven product line for professional bonding and sealing applications.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you unsure about the correct application or processing method? Our technical team is ready to advise you on substrate compatibility, processing conditions, and optimal results for your specific project. Contact us for personalized advice.\u003c\/p\u003e\n\u003cdiv class=\"footnote tableFooterText\"\u003e\n\u003cdiv class=\"footnote tableFooterText\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Wacker","offers":[{"title":"Cartridge 310 ml ","offer_id":49531859829077,"sku":"A11900","price":39.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-n2010-neutrale-siliconenlijm-voor-elektroni-48098034614613.jpg?v=1778508344"},{"product_id":"siliconen-additie-flexosil-475-heldere-ingiet-sili","title":"Silicone Additive Flexosil 475","description":"\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/5ws9NXbYDs4?t=13s\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Silicone Gel 840 is a 2-component (Platinum) Poly-Addition molding silicone that cures at room temperature to a clear colorless gel. The silicones are very fluid after mixing. The silicone can take on a very faint yellowish glow over time at temperatures above 30°C, but will remain transparent.\u003c\/p\u003e\r\n\u003cp\u003eDue to the gel shape you can still reach the measuring pins of the electronics, after which the gel (if you work carefully) closes again sufficiently against moisture.\u003c\/p\u003e\r\n\u003cp\u003eThe very good fluidity ensures good self-venting.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eVery clear\u003c\/li\u003e\r\n\u003cli\u003eExtremely fluid\u003c\/li\u003e\r\n\u003cli\u003eGel like\u003c\/li\u003e\r\n\u003cli\u003eSelf venting\u003c\/li\u003e\r\n\u003cli\u003eSuitable for potting\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio: A:B = 1:1\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (pot life) at 22°C: 80 minutes\u003c\/li\u003e\r\n\u003cli\u003eFunctional cross-linking at 20°C: after 24 hours\u003c\/li\u003e\r\n\u003cli\u003eFully cured at 20°C: after 2 days\u003c\/li\u003e\r\n\u003cli\u003eViscosity at 22°C: 125 cSt\u003c\/li\u003e\r\n\u003cli\u003eColor: clear\u003c\/li\u003e\r\n\u003cli\u003ePenetration: 60mm x 10 \u003csup\u003e-1\u003cbr \/\u003e\u003c\/sup\u003e\u003c\/li\u003e\r\n\u003cli\u003eDielectric value: 15 kV\/mm\u003c\/li\u003e\r\n\u003cli\u003eVolume resistance: 3X10 \u003csup\u003e15\u003c\/sup\u003e Ohm.cm\u003c\/li\u003e\r\n\u003cli\u003eDensity: 0.94 g\/cm³\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eNote: Pot life \/ de-mould time is strongly dependent on temperature! At a higher temperature, the processing time and de-molding time become shorter.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe Silicone gel 840 can be easily mixed by hand or by machine. Mix the A and B components carefully and in the specified ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and wait with demoulding until the whole has hardened completely. You can possibly speed up the curing process by placing the whole in an oven. Please note that air bubbles will have less time to escape in that case.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe trapping of air bubbles can best be prevented by applying a vacuum to the silicone immediately after mixing. To avoid air bubbles, stir the A and B component well but slowly without engulfing air. It is best to make a “figure-8” movement.\u003c\/p\u003e\r\n\u003cp\u003eYou can color the silicone intensely or permanently with silicone dye.\u003c\/p\u003e\r\n\u003cp\u003eThe silicone can get a very weak yellowish haze at higher temperatures. However, for most potting applications this won't hurt.\u003cbr \/\u003e\u003cbr \/\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: This is an addition silicone. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you use (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances are found in many latex gloves, some plastilines, lacquers and adhesives, condensation silicones, 1-component silicone sealants, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of poly vinyl alcohol.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eshelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided that the silicone is stored in closed packaging, cool and frost-free, the shelf life is at least one year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you frequently work with the silicone, it is recommended to wear gloves during processing and to ventilate the area well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFurther important safety information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/licht-ontvlambaar.png?v=1726531270\" alt=\"\" width=\"100\" height=\"99\" \/\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/gevaarlijk.png?v=1726531272\" alt=\"\" width=\"100\" height=\"101\" \/\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/gezondheidsgevaarlijk.png?v=1726531273\" alt=\"\" width=\"100\" height=\"101\" \/\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eH-Code hazard statements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eH315 - Causes skin irritation\u003c\/p\u003e\r\n\u003cp\u003eH319 - Causes serious eye irritation\u003c\/p\u003e\r\n\u003cp\u003eH361f - Suspected of damaging fertility\u003c\/p\u003e\r\n\u003cp\u003eH226 - Flammable liquid and vapour\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/ventilatie.jpg?v=1726531266\" alt=\"\" width=\"100\" height=\"100\" \/\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/handschoenen.png?v=1726531271\" alt=\"\" width=\"100\" height=\"100\" \/\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/handen-wassen.png?v=1726531271\" alt=\"\" width=\"100\" height=\"100\" \/\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/bril.png?v=1726531273\" alt=\"\" width=\"100\" height=\"100\" \/\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eP-Code Precautions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eP201 - Obtain special instructions before use\u003c\/p\u003e\r\n\u003cp\u003eP202 - Do not handle until all safety precautions have been read and understood\u003c\/p\u003e\r\n\u003cp\u003eP210 - Keep away from heat\/sparks\/open flames\/hot surfaces. - Do not smoke\u003c\/p\u003e\r\n\u003cp\u003eP281 - Use personal protective equipment as necessary\u003c\/p\u003e\r\n\u003cp\u003eP308 + P313 - IF exposed or concerned: Get medical advice\/attention\u003c\/p\u003e\r\n\u003cp\u003eP370 + P378 - In case of fire: Use dry soda ash to extinguish\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Productinformatie%20Siliconen%20Additie%20Gel%20Helder%20840.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e information sheet Silicone Addition Gel 840 Clear\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Productinformatie%20Siliconen%20Additie%20Gel%20Helder%20840.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca title=\"EN - Safety data sheet Silicone addition Gel 840 Clear A component.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/SDS\/NL - Veiligheidsblad Siliconen additie Gel 840 Helder A component.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEN - Safety data sheet Silicone addition Gel 840 Clear A component.pdf\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20-%20Productinformatie%20Siliconen%20Additie%20Gel%20Helder%20840.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca title=\"EN - Safety data sheet Silicone addition Gel 840 Clear B component.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/SDS\/NL - Veiligheidsblad Siliconen additie Gel 840 Helder B component.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEN - Safety data sheet Silicone addition Gel 840 Clear B component.pdf\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 Kg Set","offer_id":49531859992917,"sku":"S10091","price":23.76,"currency_code":"EUR","in_stock":true},{"title":"2 Kg Set","offer_id":49531860025685,"sku":"S10092","price":47.01,"currency_code":"EUR","in_stock":true},{"title":"9 kg set","offer_id":49531860058453,"sku":"S10447","price":225.0,"currency_code":"EUR","in_stock":true},{"title":"50 kg set","offer_id":49531860123989,"sku":"S11380","price":325.65,"currency_code":"EUR","in_stock":true},{"title":"400 Kg Set","offer_id":49531860156757,"sku":"S10737","price":4439.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-additie-flexosil-475-48098035171669.jpg?v=1757509661"},{"product_id":"siliconenlijm-wacker-elastosil-a07-translucent","title":"Wacker ELASTOSIL® A07 Translucent – RTV-1 Silicone Coating for Sealing \u0026 Protective Coating","description":"\u003ch2\u003ePremium RTV-1 Silicone Coating for Professional Sealing and Protective Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® A07 Translucent\u003c\/strong\u003e is a ready-to-use, 1-component moisture-curing solvent-based silicone coating (RTV-1), specially developed for multifunctional sealing, coating and protection of electronics and technical components. This professional product combines excellent primerless adhesion to many substrates, low modulus, and flexibility from -40°C to +180°C, ideal for HVAC, electronics, and small household appliances. No organotin catalysts. Apply by dipping, spraying, brushing or coating.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-use 1-component system:\u003c\/strong\u003e No mixing required – directly applicable from the cartridge for fast, efficient processing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent primerless adhesion:\u003c\/strong\u003e Adheres directly to many substrates including metal, glass, ceramics, and most plastics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature resistance:\u003c\/strong\u003e Flexible and stable from -40°C to +180°C for demanding thermal environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow modulus – high flexibility:\u003c\/strong\u003e Shore A 20 hardness with 300% elongation for durable, vibration-resistant bonds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo organotin catalysts:\u003c\/strong\u003e More environmentally friendly formulation in accordance with modern safety standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable layer thickness:\u003c\/strong\u003e Thinnable with toluene\/white spirit for thinner coatings, multi-step coating for thicker layers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eElectronics coating and conformal coating for circuit boards and electronic components\u003c\/li\u003e\n\u003cli\u003eHVAC systems: sealing of heating, ventilation, and air conditioning components\u003c\/li\u003e\n\u003cli\u003eSmall household appliances: sealing and protection of moving parts\u003c\/li\u003e\n\u003cli\u003eProtective coating for metal, glass, and ceramics in industrial environments\u003c\/li\u003e\n\u003cli\u003eSealing of joints and seams in technical constructions\u003c\/li\u003e\n\u003cli\u003eFlexible coating for components subject to vibrations and thermal cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eApply by dipping, spraying, brushing, or coating\u003c\/li\u003e\n\u003cli\u003eFor thinner coatings: dilute with toluene or white spirit\u003c\/li\u003e\n\u003cli\u003eFor thicker coatings: apply multi-step coating\u003c\/li\u003e\n\u003cli\u003eCuring can be accelerated at CO₂ concentration \u003e1% by volume\u003c\/li\u003e\n\u003cli\u003eRemove uncured product with organic solvents (aliphatic or aromatic hydrocarbons)\u003c\/li\u003e\n\u003cli\u003eOnce cured: only mechanical removal is possible (possibly pre-swell with solvent or Wacker Silicone Remover S8)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e Cartridge 88 grams (90 ml). Store in a tightly closed package. See product label for shelf life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for industrial, electronic and construction applications with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on application techniques, layer thicknesses, solvent selection and optimal results for your specific sealing or coating application. Contact us for technical data sheets or the safety data sheet.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"Cartridge 88 grams","offer_id":49531860189525,"sku":null,"price":23.59,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-a07-translucent-rtv-1-siliconencoating-voor-48098034975061.jpg?v=1774516427"},{"product_id":"stensil-eco-20-orange-kneedbare-siliconen-shore-a","title":"Silconic Stencil ECO 20 Orange – Soft Kneadable Silicone for Skin Impressions \u0026 SFX Molds","description":"\u003ch2\u003ePremium Soft Kneadable Silicone for Professional Skin Impression and SFX Mold Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eStensil ECO 20\u003c\/strong\u003e is a 2-component platinum-addition kneadable silicone with a Shore A 20 hardness, which cures at room temperature. The orange paste is easily mixed by hand in a 1:1 weight ratio and, thanks to its 1.5-minute pot life and demolding time of only 5 minutes, is ideal for fast, accurate impressions. The very low shrinkage of \u0026lt;0.1% guarantees high dimensional accuracy for skin impressions, special-effects molds, dental technology, and podiatric applications.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 20 – \u003c\/strong\u003e the softest hardness in the Stensil ECO series, ideal for flexible impressions on skin and complex undercuts without damaging the original.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemolding time 5 minutes – \u003c\/strong\u003e extremely fast curing at 20°C for high throughput in professional working environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage \u0026lt;0.1% – \u003c\/strong\u003e dimensionally accurate reproductions with sharp detail, suitable for reproductions at a micrometer level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 1.68 g\/cm³ – \u003c\/strong\u003e firm paste structure that does not run or sag during processing, even in vertical applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:1 mixing ratio by weight – \u003c\/strong\u003e easy to mix manually without mixing equipment or digital scales necessary for small quantities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance – \u003c\/strong\u003e reasonably resistant to acidic and more aggressive substances for repeated use of the impression.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSkin impressions – \u003c\/strong\u003e hand and face impressions for SFX and body casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial-effects molds – \u003c\/strong\u003e soft molds for flexible prosthetics and makeup appliances in film and theater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDental technology – \u003c\/strong\u003e accurate dental impressions and study models for laboratory work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePodiatry – \u003c\/strong\u003e foot impressions for arch supports and orthopedic aids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry \u0026amp; goldsmithing – \u003c\/strong\u003e molds for delicate details, filigree, and wax models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel making \u0026amp; prototyping – \u003c\/strong\u003e reproductions of small parts with flexible undercuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTake equal parts of A and B components by weight (1:1).\u003c\/li\u003e\n\u003cli\u003eKnead both components thoroughly by hand until a uniform orange color is achieved.\u003c\/li\u003e\n\u003cli\u003eProcess the mixed paste within the 1.5-minute pot life.\u003c\/li\u003e\n\u003cli\u003ePress the silicone over or around the model and wait 5 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eDemold once the silicone is fully cured and no longer feels tacky.\u003c\/li\u003e\n\u003cli\u003eFull strength is achieved after 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eAddition silicone warning:\u003c\/strong\u003e Stensil ECO is a platinum-addition silicone that can be poisoned by sulfur, nitrogen, amine compounds, and metal salts. These substances are found, among others, in many latex gloves, some plastilines, paints, adhesives, condensation silicones, 1-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography\/SLA). If in doubt, first test on a small area or apply a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilconic GmbH \u0026amp; Co. KG\u003c\/strong\u003e is a German manufacturer of high-quality silicone elastomers with production in Lonsee. Since 2004, the company has been developing dental silicones under its own brands and is one of the leading producers of RTV-2 silicones in Europe.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you unsure about the correct hardness for your skin impression or SFX application? Our technical team will be happy to advise you on the optimal Stensil ECO choice for your specific project. Contact us via our website for personalized advice.\u003c\/p\u003e","brand":"Silconic","offers":[{"title":"500 Gr. set","offer_id":49531860615509,"sku":"S11449","price":21.0,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531860648277,"sku":"S11460","price":247.81,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/silconic-silconic-stensil-eco-20-oranje-zachte-kneedbare-silicone-vo-48098035138901.png?v=1774962408"},{"product_id":"stensil-eco-70-blue","title":"Silconic Stensil ECO 70 Blue – Kneadable Silicone for Mold Making \u0026 Industrial Prototyping","description":"\u003ch2\u003ePremium Hard Kneadable Silicone for Professional Mold Making and Industrial Prototyping Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eStensil ECO 70\u003c\/strong\u003e is a 2-component platinum-addition kneadable silicone (Shore A 70) that cures at room temperature. The blue paste is easily mixed by hand in a 1:1 weight ratio and offers an efficient production cycle with a pot life of 1.5 minutes and a demolding time of 6 minutes. Its Shore A 70 hardness makes this variant highly suitable for robust production molds, industrial prototyping, technical reproduction, and applications where high dimensional stability is essential.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 70 – \u003c\/strong\u003e hard version offering high pressure resistance for heavy materials and long production runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemolding time 6 minutes – \u003c\/strong\u003e fast curing at 20°C for industrial efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage \u0026lt;0.1% – \u003c\/strong\u003e excellent dimensional stability for precise technical applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 1.68 g\/cm³ – \u003c\/strong\u003e firm paste structure for vertical and complex model shapes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:1 mixing ratio by weight – \u003c\/strong\u003e easy manual mixing without equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance – \u003c\/strong\u003e reasonably resistant to acidic and more aggressive substances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial prototyping – \u003c\/strong\u003e sturdy molds for technical components and machine parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction molds – \u003c\/strong\u003e hard molds for long production runs of metal or resin casting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry production – \u003c\/strong\u003e molds for heavy metals or large pieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel making – \u003c\/strong\u003e precise reproduction of technical details.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestoration – \u003c\/strong\u003e hard molds for structural ornaments and fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDental technology – \u003c\/strong\u003e firm control bites and hard insulating layers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTake equal parts of A and B components by weight (1:1).\u003c\/li\u003e\n\u003cli\u003eKnead both components thoroughly with clean hands until a uniform blue color is achieved.\u003c\/li\u003e\n\u003cli\u003eProcess the mixed paste within the 1.5-minute pot life.\u003c\/li\u003e\n\u003cli\u003ePress the silicone over or around the model and wait 6 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eDemold once the silicone is fully cured and no longer feels sticky.\u003c\/li\u003e\n\u003cli\u003eFull strength is reached after 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eAddition-cure silicone warning:\u003c\/strong\u003e Stensil ECO is a platinum-addition silicone that can be poisoned by sulfur, nitrogen, amine compounds, and metal salts. These substances are found, among other things, in many latex gloves, some plastilines, paints, adhesives, condensation-cure silicones, 1-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography\/SLA). If in doubt, first test on a small area or apply a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilconic GmbH \u0026amp; Co. KG\u003c\/strong\u003e is a German manufacturer of high-quality silicone elastomers with production in Lonsee. Since 2004, the company has been developing dental silicones under its own brands and is one of the leading producers of RTV-2 silicones in Europe.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eDo you need Shore A 70, or would the harder ECO 95 be more suitable for your production? We are happy to advise you. Please contact us via our website.\u003c\/p\u003e","brand":"Silconic","offers":[{"title":"500 Gr. set","offer_id":49531860681045,"sku":"S11450","price":22.95,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531860746581,"sku":"S11457","price":244.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/silconic-silconic-stensil-eco-70-blauw-kneedbare-silicone-voor-malle-48098035040597.png?v=1774962408"},{"product_id":"zhermack-sfx-00-30","title":"Zhermack SFX 00-30 – Ultra Soft Addition Cure Silicone Shore 00-30 for Masks, Robotics \u0026 SFX","description":"\u003ch2\u003eUltra soft platinum silicone for masks, robotics and dolls\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eZhermack SFX 00-30\u003c\/strong\u003e is a two component addition cure silicone rubber with Shore 00-30 hardness. It is the slightly firmer version of SFX 00-20 and therefore holds its shape better, while remaining ultra soft and highly stretchable. It mixes 1:1 by weight, the working time is 25 minutes and the material is set after about 110 minutes at 23 °C.\u003c\/p\u003e\n\n\u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore 00-30, ultra soft but more dimensionally stable:\u003c\/strong\u003e firmer than SFX 00-20 and therefore better suited to larger masks and parts that need to hold their shape.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighly stretchable:\u003c\/strong\u003e high elongation at break, so thin edges and over stretched parts do not tear easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear strength 4 N\/mm (Die B):\u003c\/strong\u003e resists tearing during repeated putting on and taking off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow viscosity:\u003c\/strong\u003e 6,000 mPa s, free flowing and self de-airing for sharp detail reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranslucent:\u003c\/strong\u003e a neutral base for pigmenting, flocking and skin tones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftened with Deadner:\u003c\/strong\u003e for a gel like consistency without switching product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent release:\u003c\/strong\u003e models demould easily.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style='background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;'\u003e\n\u003ch3 style='color: #856404; margin-top: 0;'\u003e⚠️ No biocompatibility assessment for this product\u003c\/h3\u003e\n\u003cp\u003eZhermack had the ISO 10993-1 biocompatibility study carried out on \u003cstrong\u003eZA SFX 0020\u003c\/strong\u003e and \u003cstrong\u003eZA SFX 10 WT 10\u003c\/strong\u003e. SFX 00-30 was not part of that study. We therefore make no claim about skin or mucosal contact for this product.\u003c\/p\u003e\n\u003cp\u003eIf you need a silicone that has been assessed for contact with intact skin and with mucosal membrane, choose Zhermack SFX 00-20 or Zhermack ZA SFX 10 WT 10. If you are unsure, contact us at info@siliconesandmore.com.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✓ Masks and cosplay\u003c\/li\u003e\n\u003cli\u003e✓ Animatronics, robotics and dolls\u003c\/li\u003e\n\u003cli\u003e✓ Props and set building\u003c\/li\u003e\n\u003cli\u003e✓ Special effects without prolonged direct skin contact\u003c\/li\u003e\n\u003cli\u003e✓ Soap and candle moulds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProcessing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eShake or stir base and catalyst separately before use to redisperse any sediment.\u003c\/li\u003e\n\u003cli\u003eWeigh base and catalyst 1:1. A deviation of up to 5 % does not noticeably change the result.\u003c\/li\u003e\n\u003cli\u003eMix vigorously in a clean, grease free and dry container and scrape the bottom and sides, until the mixture is homogeneous.\u003c\/li\u003e\n\u003cli\u003eAdd Deadner if you want a softer, gel like consistency.\u003c\/li\u003e\n\u003cli\u003ePreferably de-air under vacuum and pour from about 30 cm height into the mould.\u003c\/li\u003e\n\u003cli\u003eAllow about 110 minutes to set at 23 °C, then demould without tools.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eAbove 23 °C working time and setting time drop sharply, at 40 °C roughly by half. Below 23 °C both increase considerably. Heating speeds up the cure, but air bubbles then have less time to escape.\u003c\/p\u003e\n\n\u003ch3\u003ePoints to watch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✓ The platinum catalyst is in the CATALYST component. Only use base and catalyst together when they carry the same batch number.\u003c\/li\u003e\n\u003cli\u003e✓ Uncured silicone is irritating to the eyes. Wear eye protection and gloves.\u003c\/li\u003e\n\u003cli\u003e✓ Sulphur bearing clay, latex, PVC, uncured polyurethane and epoxy, cyanoacrylate and many SLA 3D prints can poison platinum silicones. Test on a small scale or use a PVA barrier layer.\u003c\/li\u003e\n\u003cli\u003e✓ Shelf life about 12 months in closed packaging, stored cool and frost free.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProfessional support\u003c\/h3\u003e\n\u003cp\u003eIf you are choosing between SFX 00-20 and SFX 00-30, or you are not sure which hardness suits your application, contact us at info@siliconesandmore.com.\u003c\/p\u003e","brand":"Zhermack","offers":[{"title":"1 kg Set","offer_id":49531860844885,"sku":"S11394","price":49.95,"currency_code":"EUR","in_stock":false},{"title":"2 kg Set","offer_id":49531860877653,"sku":null,"price":95.0,"currency_code":"EUR","in_stock":false},{"title":"10 kg Set ","offer_id":49531860910421,"sku":"A11832","price":452.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/zhermack-zhermack-sfx-00-30-48098035630421.png?v=1727352642"},{"product_id":"siliconen-condensatie-20-voor-polyester-gemiddeld","title":"Silicone Condensation 20 Polyester – Molding Rubber for Polyester Molds \u0026amp; Composite Casting","description":"\u003ch2\u003ePremium Condensation Silicone for Professional Molds\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eSilicone Condensation 20\u003c\/strong\u003e is a tin-cure silicone rubber with a Shore A 20 hardness, specially developed for creating durable molds for polyester, epoxy, and composite casting. This liquid silicone delivers exceptional detail and combines flexibility with very high tensile strength for long-term use.\u003c\/p\u003e\n\u003ch3\u003e Key Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExcellent fluidity:\u003c\/strong\u003e Captures finest details and textures accurately\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVery high tensile strength:\u003c\/strong\u003e Resistant to intensive use and repeated castings\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eOptimal flexibility:\u003c\/strong\u003e Shore A 20 hardness for easy demoulding\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTailored to polyester:\u003c\/strong\u003e Supplied with Wacker hardener T 51, specifically developed for resistance to polyester resins\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eReliable curing:\u003c\/strong\u003e Predictable processing time and consistent results\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCost-effective:\u003c\/strong\u003e Long life and high yield per mold\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Typical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Molds for polyester and composite parts in the automotive and maritime industries\u003c\/li\u003e\n\n\u003cli\u003e Props and set pieces for theatre, film and events\u003c\/li\u003e\n\n\u003cli\u003e Sculptures, ornaments and architectural elements in plaster and concrete\u003c\/li\u003e\n\n\u003cli\u003e Candle molds and soap molds for artisanal production\u003c\/li\u003e\n\n\u003cli\u003e Prototypes and model building for product design\u003c\/li\u003e\n\n\u003cli\u003e Precision foundry and art foundry applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Technical Features\u003c\/h3\u003e\n\u003cp\u003e This condensation silicone is supplied as a two-component system, easy to use at room temperature. Its medium hardness (Shore A 20) offers the ideal balance between flexibility and dimensional stability. Suitable for both brush and pouring applications, depending on the complexity of the model.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e \u003cspan\u003ePot life (processing time) and demold time depend heavily on the mixing ratio and humidity. Adding more silicone B (hardener) or increasing humidity will shorten the pot life and demold time.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e Ironing, Smearing or Spatula\u003c\/h3\u003e\n\u003cp\u003e For spreading, spatulating or smoothing silicone you can use \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/thixo-c\" rel=\"noopener\" target=\"_blank\"\u003eThixo C\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e(0.6%-2%, usually 1%)\u003c\/strong\u003e . This thickener makes the silicone easy to spread. With this processing method, the mold must be provided with a\u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/gips-gipsverband\" rel=\"noopener\" target=\"_blank\"\u003eplaster bandage support cap.\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/epoxy-steunkap.html\" rel=\"noopener\" target=\"_blank\"\u003eepoxy support cap,\u003c\/a\u003e \u003cspan\u003eor\u003c\/span\u003e \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/acryl-hars-set\" rel=\"noopener\" target=\"_blank\"\u003eacrylic resin\u003c\/a\u003e \u003cspan\u003ewith\u003c\/span\u003e \u003ca href=\"https:\/\/www.siliconesandmore.com\/nl\/a1-thixotrope-a.html\" rel=\"noopener\" target=\"_blank\"\u003ethickener\u003c\/a\u003e \u003cspan\u003eand\u003c\/span\u003e \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/triaxiaal-glasvezeldoek\" rel=\"noopener\" target=\"_blank\"\u003eglass fibre.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e Manufactured by \u003cstrong\u003eSilicones and More\u003c\/strong\u003e , specialists in high-quality moulding rubbers and casting materials for professional makers.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e Professional Support\u003c\/h3\u003e\n\u003cp\u003e Questions about processing time, mixing ratios, or application possibilities? Our technical team is happy to advise you on the right material for your project.\u003c\/p\u003e","brand":"SAM - Silicones and More","offers":[{"title":"1 kg A component + 50 grams T51 B component","offer_id":49531861107029,"sku":"S11413","price":24.5,"currency_code":"EUR","in_stock":true},{"title":"5 Kg A component + 250 grams T51 B component","offer_id":49531861139797,"sku":"S11414","price":112.5,"currency_code":"EUR","in_stock":false},{"title":"20 Kg A component + 1 Kg T51 B component","offer_id":49531861172565,"sku":"S11415","price":390.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/sam-silicones-and-more-siliconen-condensatie-20-polyester-vormrubbe-48098035466581.png?v=1768917902"},{"product_id":"t47-snelle-harder-voor-siliconen-condensatie-20-g","title":"Wacker Catalyst T 47® – Curing Agent for Condensation Silicones \u0026 Mold Making","description":"\u003ch2\u003ePremium Fast Catalyst for Professional Mold-Making and Model-Making Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWACKER\u0026reg; Catalyst T 47\u003c\/strong\u003e is a very fast tin catalyst (curing agent) for all condensation-curing RTV-2 silicones. The thin, yellowish liquid (viscosity 1.6 mPa\u0026middot;s, density 1.02 g\/cm\u0026sup3;) strongly accelerates curing and is dosed at 1 to 2\u0026nbsp;% relative to the A component. T 47 can be used neat for maximum speed, or blended with a standard catalyst such as T 21 (polyurethane resin resistance) or T 51 (polyester resin resistance) to set any curing speed while retaining that catalyst's properties. This lets you control pot life and demolding time across a wide range, from a few minutes to over an hour. The catalyst is intended for producing flexible molds and printing pads based on condensation RTV-2 silicones.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eVery fast curing \u0026ndash;\u003c\/strong\u003e as the fastest catalyst in the WACKER T series, T 47 used neat (1.5\u0026nbsp;%) reduces demolding time to 1 to 2 hours.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLow dosage of 1 to 2\u0026nbsp;% \u0026ndash;\u003c\/strong\u003e a small amount is enough, so the properties of the silicone system are largely retained.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFreely blendable \u0026ndash;\u003c\/strong\u003e miscible with T 21 or T 51 (for example 90:10) to fine-tune speed and resin properties exactly to your application.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWide adjustable range \u0026ndash;\u003c\/strong\u003e pot life adjustable from a few minutes up to about 120 minutes and cure time from 1 to 24 hours at room temperature.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUniversally applicable \u0026ndash;\u003c\/strong\u003e suitable for all condensation-curing ELASTOSIL\u0026reg; M\/RT silicones and comparable RTV-2 systems.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eColorable for mixing control \u0026ndash;\u003c\/strong\u003e the yellowish tint and optional color addition make visual control of a homogeneous mix easy.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAccelerating condensation silicones for making flexible molds\u003c\/li\u003e\n\u003cli\u003eMolds for casting polyurethane and polyester resins\u003c\/li\u003e\n\u003cli\u003eModel-making and prototyping where short demolding times are desired\u003c\/li\u003e\n\u003cli\u003eProduction of printing pads (pad printing)\u003c\/li\u003e\n\u003cli\u003eMolds for concrete, plaster, wax and candles\u003c\/li\u003e\n\u003cli\u003eProps, set building and art casting with condensation silicones\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStir the A component (silicone) thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eWeigh the catalyst accurately: 1 to 2\u0026nbsp;% T 47 by weight of the A component (so 1 to 2\u0026nbsp;grams T 47 per 100\u0026nbsp;grams A). For slower curing with more time for air to escape, dose towards 1\u0026nbsp;%; for faster curing, towards 2\u0026nbsp;%. Never use too little catalyst, as the silicone will then cure insufficiently.\u003c\/li\u003e\n\u003cli\u003eFor a controlled speed while retaining resin resistance: blend T 47 with T 21 or T 51 (for example 0.5\u0026nbsp;gram T 47 with 4.5\u0026nbsp;grams T 21 or T 51 per 100\u0026nbsp;grams A).\u003c\/li\u003e\n\u003cli\u003eMix the A component and catalyst thoroughly and homogeneously.\u003c\/li\u003e\n\u003cli\u003ePour the mixture within the pot life and never prepare more than you can process within that time.\u003c\/li\u003e\n\u003cli\u003eAllow the whole to cure completely before demolding. Pot life and demolding time depend strongly on dosage and humidity: more catalyst or higher humidity shortens both.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eWacker Chemie AG is the world market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eUnsure about the right dosage or blend ratio for your condensation silicone? Our specialists are happy to help you find the right balance between pot life and curing speed. Feel free to contact us for tailored advice.\u003c\/p\u003e\n","brand":"Wacker","offers":[{"title":"40 gram bottle of WACKER® Catalyst T-47","offer_id":49531861467477,"sku":"S10012","price":6.05,"currency_code":"EUR","in_stock":true},{"title":"200 gram bottle of WACKER® Catalyst T-47","offer_id":49531861500245,"sku":"S10293","price":15.09,"currency_code":"EUR","in_stock":true},{"title":"800grams bottle WACKER® Catalyst T-47","offer_id":49531861533013,"sku":"S10013","price":48.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-catalyst-t-47-verharder-voor-condensatiesiliconen-m-48098035335509.png?v=1780488282"},{"product_id":"stensil-eco-50-l-roze","title":"Silconic Stencil ECO 50 L Pink – Kneadable Silicone with Long Potlife for Mold Making \u0026 Model Building","description":"\u003ch2\u003ePremium Long-Potlife Kneadable Silicone for Professional Mold Making and Model Building Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eStensil ECO 50 L\u003c\/strong\u003e is a 2-component platinum-addition kneadable silicone (Shore A 50) that stands out for its long pot life of 10 minutes and cure time of 60 minutes at room temperature. The pink paste is easily mixed by hand in a 1:1 weight ratio. The extended processing time makes this variant ideal for larger molds, complex models, and applications where haste is counterproductive. With the same Shore A 50 hardness as the standard ECO 50, the L-variant offers identical physical properties but with more time to apply the paste precisely.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life 10 minutes – \u003c\/strong\u003e six times longer processing time than standard Stensil ECO 50, for complex or large models without time pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure time 60 minutes – \u003c\/strong\u003e full cure within one hour at 20°C, fast enough for production work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 50 – \u003c\/strong\u003e medium hardness that combines flexibility for undercuts with firmness for repeated demolding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage \u0026lt;0.1% – \u003c\/strong\u003e dimensionally accurate reproductions without distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 1.63 g\/cm³ – \u003c\/strong\u003e stable paste for vertical and overhead applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:1 mixing ratio by weight – \u003c\/strong\u003e easy manual mixing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge molds – \u003c\/strong\u003e molds where standard kneadable silicones offer insufficient processing time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel making \u0026amp; prototyping – \u003c\/strong\u003e complex models with multiple undercuts requiring careful application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestoration – \u003c\/strong\u003e historical ornaments and architectural details where accuracy takes precedence over speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry \u0026amp; goldsmithing – \u003c\/strong\u003e large jewelry molds with filigree work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation \u0026amp; workshops – \u003c\/strong\u003e longer processing time gives beginners more room for correction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-part molds – \u003c\/strong\u003e time to carefully build up the first half before the second half follows.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTake equal parts of A and B components by weight (1:1).\u003c\/li\u003e\n\u003cli\u003eKnead both components thoroughly by hand until a uniform pink color is achieved.\u003c\/li\u003e\n\u003cli\u003eProcess the mixed paste within the 10-minute pot life.\u003c\/li\u003e\n\u003cli\u003ePress the silicone over or around the model and wait 60 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eDemold once the silicone has fully cured and no longer feels sticky.\u003c\/li\u003e\n\u003cli\u003eFull strength is reached after 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eAddition-cure silicone warning:\u003c\/strong\u003e Stensil ECO is a platinum-addition silicone that can be inhibited by sulfur, nitrogen, amine compounds, and metal salts. These substances are found in many latex gloves, some plasticines, varnishes, glues, condensation-cure silicones, 1-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography\/SLA). If in doubt, first test on a small area or apply a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilconic GmbH \u0026amp; Co. KG\u003c\/strong\u003e is a German manufacturer of high-quality silicone elastomers with production in Lonsee. Since 2004, the company has been developing dental silicones under its own brands and is among the leading producers of RTV-2 silicones in Europe.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you unsure whether you need the standard ECO 50 or the Long-potlife variant? We are happy to advise you on the right choice based on your project size and complexity. Contact us via our website for personalized advice.\u003c\/p\u003e","brand":"Silconic","offers":[{"title":"500 Gr. set","offer_id":49531861598549,"sku":"S11363","price":21.0,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531861631317,"sku":"S11464","price":245.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/silconic-silconic-stensil-eco-50-l-roze-kneedbare-silicone-met-lange-48098036285781.jpg?v=1774962408"},{"product_id":"zhermack-sfx-00-20","title":"Zhermack SFX 00-20 – Biocompatible Ultra Soft Addition Cure Silicone Shore 00-20 for SFX \u0026 Skin Contact","description":"\u003ch2\u003eBiocompatible ultra soft silicone for skin contact and special effects\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eZhermack SFX 00-20\u003c\/strong\u003e is a two component addition cure silicone rubber with Shore 00-20 hardness, developed for special effects and skin applications. Together with ZA SFX 10 WT 10 it is the only product in our range that Zhermack has had assessed under ISO 10993-1 for contact with intact skin as well as contact with mucosal membrane. It mixes 1:1 by weight, the working time is 25 minutes and the material is set after 70 minutes at 23 °C.\u003c\/p\u003e\n\n\u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAssessed under ISO 10993-1:\u003c\/strong\u003e tested for cytotoxicity (10993-5), sensitisation (10993-10) and skin irritation (10993-23), with no relevant biological effects. Study completed in August 2023.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo organic plasticisers:\u003c\/strong\u003e Zhermack states the product does not contain any.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore 00-20, ultra soft:\u003c\/strong\u003e softer than the Shore A range and therefore close to the feel of tissue, which suits skin, masks and soft appliances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtremely stretchable:\u003c\/strong\u003e 770 % elongation at break, the highest in the Zhermack SFX range, so thin edges and over stretched parts do not tear easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow viscosity:\u003c\/strong\u003e 5,200 mPa s, free flowing and self de-airing for sharp detail reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranslucent:\u003c\/strong\u003e a neutral base for pigmenting, flocking and skin tones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftened with Deadner:\u003c\/strong\u003e for a gel like consistency without switching product.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e the cured material is stable from -40 °C to +200 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv style='background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;'\u003e\n\u003ch3 style='color: #856404; margin-top: 0;'\u003e⚠️ What the biocompatibility assessment does and does not say\u003c\/h3\u003e\n\u003cp\u003eZhermack had this product assessed as a surface medical device in two contact categories:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✓ contact with \u003cstrong\u003eintact skin\u003c\/strong\u003e, prolonged contact of more than 30 days\u003c\/li\u003e\n\u003cli\u003e✓ contact with \u003cstrong\u003emucosal membrane\u003c\/strong\u003e, contact duration up to 24 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOutside that scope the report says nothing. The assessment applies to the material as Zhermack supplies it. Pigment, softener, Deadner, release agent, mix ratio and degree of cure all influence the result of your finished part. If you are making a medical device or a product with prolonged body contact, have the cured end product tested by an accredited laboratory.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✓ Masks, cosplay and props with skin contact\u003c\/li\u003e\n\u003cli\u003e✓ Special effects make-up, appliances and film prosthetics\u003c\/li\u003e\n\u003cli\u003e✓ Animatronics, robotics and dolls\u003c\/li\u003e\n\u003cli\u003e✓ Bodycasting and skin replication\u003c\/li\u003e\n\u003cli\u003e✓ Medical simulation models and training phantoms\u003c\/li\u003e\n\u003cli\u003e✓ Soft prostheses and soft parts with skin contact\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProcessing\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eShake or stir base and catalyst separately before use to redisperse any sediment.\u003c\/li\u003e\n\u003cli\u003eWeigh base and catalyst 1:1. A deviation of up to 5 % does not noticeably change the result.\u003c\/li\u003e\n\u003cli\u003eMix vigorously in a clean, grease free and dry container and scrape the bottom and sides, until the mixture is homogeneous.\u003c\/li\u003e\n\u003cli\u003eAdd Deadner if you want a softer, gel like consistency.\u003c\/li\u003e\n\u003cli\u003ePreferably de-air under vacuum and pour from about 30 cm height into the mould, so air bubbles stretch and break.\u003c\/li\u003e\n\u003cli\u003eAllow 70 minutes to set at 23 °C, then demould without tools. Use compressed air to help release if needed.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you run short, you can top up within 24 hours of the first layer setting. The second layer bonds to the first without altering the final outcome. Above 23 °C working time and setting time drop sharply, at 40 °C roughly by half. Below 23 °C both increase considerably.\u003c\/p\u003e\n\n\u003ch3\u003ePoints to watch\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✓ The platinum catalyst is in the CATALYST component. Only use base and catalyst together when they carry the same batch number.\u003c\/li\u003e\n\u003cli\u003e✓ Work on clean, grease free and dry surfaces and do not swap the caps of base and catalyst.\u003c\/li\u003e\n\u003cli\u003e✓ Vaseline oil can inhibit cure, so test on a small scale first.\u003c\/li\u003e\n\u003cli\u003e✓ Sulphur bearing clay, latex, PVC, uncured polyurethane and epoxy, cyanoacrylate and many SLA 3D prints can also poison platinum silicones.\u003c\/li\u003e\n\u003cli\u003e✓ Shelf life 12 months when stored between 5 °C and 27 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProfessional support\u003c\/h3\u003e\n\u003cp\u003eIf you are unsure whether this product suits your contact duration and application, or you need the Zhermack biocompatibility dossier, get in touch at info@siliconesandmore.com. Tell us what kind of contact is involved and for how long, and we will find out which documentation exists and which does not.\u003c\/p\u003e","brand":"Zhermack","offers":[{"title":"1 kg Set","offer_id":49531861926229,"sku":"S11393","price":49.95,"currency_code":"EUR","in_stock":false},{"title":"2 kg Set","offer_id":49531861958997,"sku":"S82007","price":95.0,"currency_code":"EUR","in_stock":false},{"title":"10 kg Set ","offer_id":49531861991765,"sku":"A11831","price":452.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/zhermack-zhermack-sfx-00-20-48098035663189.png?v=1727352642"},{"product_id":"stensil-eco-95-blue-kneedbare-siliconen-shore-a-95","title":"Silconic Stencil ECO 95 Blue – Kneadable Silicone for Hard Molds \u0026 Industrial Applications","description":"\u003ch2\u003ePremium Extra-Hard Kneadable Silicone for Professional Hard Mold and Industrial Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eStensil ECO 95\u003c\/strong\u003e is a 2-component platinum-addition kneadable silicone (Shore A 95) and the hardest variant in the Stensil ECO series. The blue paste cures at room temperature and is mixed by hand in a 1:1 weight ratio. With a pot life of 1.5 minutes and a demolding time of only 4.5 minutes, this variant offers the fastest curing in the series. The Shore A 95 hardness makes Stensil ECO 95 eminently suitable for industrial production molds, heavy reproduction, pressure-resistant applications, and situations where normal silicone would be too flexible.\u003c\/p\u003e\n\n\u003ch3\u003eKey Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 95 – \u003c\/strong\u003e extra-hard version that approaches rubber but remains kneadable for maximum pressure resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemolding time 4.5 minutes – \u003c\/strong\u003e fastest curing in the Stensil ECO series for high industrial throughput.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage \u0026lt;0.1% – \u003c\/strong\u003e excellent dimensional stability for technical precision applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 1.72 g\/cm³ – \u003c\/strong\u003e highest density in the series for a sturdy, shape-retaining paste structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:1 mixing ratio by weight – \u003c\/strong\u003e easy manual mixing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance – \u003c\/strong\u003e reasonably resistant to acidic and more aggressive substances for industrial reuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial production molds – \u003c\/strong\u003e hard molds for long production runs with pressure-resistant requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy reproduction – \u003c\/strong\u003e molds for heavy metals or large castings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnical prototyping – \u003c\/strong\u003e rigid molds for components where flexibility is undesirable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRestoration – \u003c\/strong\u003e structural ornaments and heavy fittings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie casting – \u003c\/strong\u003e molds that must withstand high internal pressure during filling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTooling – \u003c\/strong\u003e production aids and fixtures where rubber is too soft.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTake equal parts of components A and B by weight (1:1).\u003c\/li\u003e\n\u003cli\u003eKnead both components carefully with clean hands until a uniform blue color is achieved.\u003c\/li\u003e\n\u003cli\u003eProcess the mixed paste within the 1.5-minute pot life.\u003c\/li\u003e\n\u003cli\u003ePress the silicone over or around the model and wait 4.5 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eDemold once the silicone is fully cured and no longer feels sticky.\u003c\/li\u003e\n\u003cli\u003eFull strength is achieved after 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eAddition-cure silicone warning:\u003c\/strong\u003e Stensil ECO is a platinum-addition silicone that can be inhibited by sulfur, nitrogen, amine compounds, and metal salts. These substances are found, among other things, in many latex gloves, some plastilines, paints, adhesives, condensation-cure silicones, 1-component silicone sealant, natural rubbers, and 3D printing materials (especially stereolithography\/SLA). If in doubt, test on a small area first or apply a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilconic GmbH \u0026amp; Co. KG\u003c\/strong\u003e is a German manufacturer of high-quality silicone elastomers with production in Lonsee. Since 2004, the company has developed dental silicones under its own brands and is one of the leading producers of RTV-2 silicones in Europe.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eStensil ECO 95 is the hardest kneadable silicone in our series. For special industrial applications or advice on whether this is the right material for your project, please contact us via our website.\u003c\/p\u003e","brand":"Silconic","offers":[{"title":"500 Gr. set","offer_id":49531862024533,"sku":"S11361","price":21.0,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531862090069,"sku":"S11459","price":247.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/silconic-silconic-stensil-eco-95-blauw-kneedbare-silicone-voor-harde-48098036351317.jpg?v=1774958808"},{"product_id":"elastosil-e10-rood-siliconenlijm-wacker","title":"Wacker ELASTOSIL® E10 RED – Heat-Resistant Silicone Adhesive for High Temperature \u0026 Industrial Sealing","description":"\u003ch2\u003ePremium Heat-Resistant Silicone Adhesive for Professional Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eELASTOSIL® E10 RED\u003c\/strong\u003e is a ready-to-use, acetoxy-curing RTV-1 silicone rubber from Wacker Chemie AG. This one-component system offers exceptional heat resistance up to 230 °C (peak 250 °C) and adheres primer-free to a wide range of substrates — ideal for demanding high-temperature and industrial sealing applications. Its red color makes the product immediately recognizable in professional environments.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh temperature resistance:\u003c\/strong\u003e Permanently elastic from -45 °C to +230 °C; short-term peak load up to 250 °C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimerless adhesion:\u003c\/strong\u003e Adheres directly to metals, glass, ceramics, and most plastics without pre-treatment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh elongation:\u003c\/strong\u003e 300% elongation at break for durable sealing with thermal expansion and vibrations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow viscosity:\u003c\/strong\u003e Liquid consistency (9,000 mPa·s) makes precise dosing and application easy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-free:\u003c\/strong\u003e No hazardous solvents; safe for use in industrial production environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV and ozone resistant:\u003c\/strong\u003e Excellent resistance to aging, moisture, UV, and ozone for long-term outdoor applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeating elements:\u003c\/strong\u003e Sealing of tubular and flat heating elements in industrial equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive:\u003c\/strong\u003e Sealing and bonding of engine components, exhaust systems, and high-temperature components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial assembly:\u003c\/strong\u003e Joining and sealing of components exposed to extreme temperature fluctuations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectronics \u0026amp; sensors:\u003c\/strong\u003e Protection of sensors and electronic modules in high-temperature environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHVAC \u0026amp; installations:\u003c\/strong\u003e Sealing of pipes, penetrations, and connections in heating and ventilation systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrototyping \u0026amp; R\u0026amp;D:\u003c\/strong\u003e Flexible sealing for test setups with thermal loads.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Characteristics\u003c\/h3\u003e\n\u003cp\u003eELASTOSIL® E10 RED is a 1-component RTV silicone rubber (acetoxy-cure) with a Shore A hardness of 25 after curing. Viscosity: approx. 9,000 mPa·s (D=0.5 1\/s); skin-forming time 10–15 minutes at 23 °C. Curing rate: approx. 12 hours per mm thickness at 23 °C and 50% relative humidity. Tensile strength: 2.5 N\/mm²; elongation: 300%; cured density: 1.10 g\/cm³. Note: acetoxy curing produces acetic acid during curing — not suitable for corrosion-sensitive metals or electronics without adequate ventilation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie AG \u003c\/strong\u003eis a globally leading manufacturer of silicones and polymer chemicals, with decades of expertise in high-performance silicone solutions for industry, automotive, and high-temperature applications. ELASTOSIL® E10 is a proven product line for professional bonding, sealing, and coating applications.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you unsure about the correct application, substrate compatibility, or processing conditions? Our technical team will be happy to advise you on the optimal use of ELASTOSIL® E10 RED for your specific project. Contact us for personalized technical advice.\u003c\/p\u003e\n\u003cdiv class=\"footnote tableFooterText\"\u003e\n\u003cdiv class=\"footnote tableFooterText\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Wacker","offers":[{"title":"Cartridge 310 ml ","offer_id":49531862483285,"sku":"A11792","price":28.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-e10-rood-hittebestendige-siliconenlijm-voor-48098035990869.png?v=1778511900"},{"product_id":"stensil-eco-30-zand-kneedbare-siliconen-shore-a-30","title":"Silconic Stencil ECO 30 Sand Color – Kneadable Silicone for Mold Making \u0026 Dental Technology","description":"\u003ch2\u003ePremium Kneadable Silicone for Professional Mold Making and Dental Technology Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eStensil ECO 30\u003c\/strong\u003e is a 2-component platinum-addition kneadable silicone (Shore A 30) that cures at room temperature. The sand-colored paste is easily mixed by hand in a 1:1 weight ratio and, thanks to its 1.5-minute pot life and 5-minute demolding time, is ideal for quick, precise reproductions. The very low shrinkage of \u0026lt;0.1% makes Stensil ECO 30 eminently suitable for dimensionally critical applications in mold making, dental technology, podiatry, and jewelry production.\u003c\/p\u003e\n\n\u003ch3\u003eKey Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 30 – \u003c\/strong\u003e medium-soft hardness that combines flexibility with sufficient firmness for repeated demolding of complex geometries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDemolding Time 5 minutes – \u003c\/strong\u003e rapid curing at 20°C for high throughput in laboratories and workshops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrinkage \u0026lt;0.1% – \u003c\/strong\u003e dimensionally accurate reproductions suitable for precision applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDensity 1.68 g\/cm³ – \u003c\/strong\u003e firm paste structure that adheres to vertical models without sagging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1:1 mixing ratio by weight – \u003c\/strong\u003e simple manual mixing, no equipment required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChemical resistance – \u003c\/strong\u003e reasonably resistant to acidic and more aggressive substances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDental Technology – \u003c\/strong\u003e dental impressions, control bites, study models, and insulating layers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePodiatry – \u003c\/strong\u003e foot impressions for orthopedic insoles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMold Making – \u003c\/strong\u003e reproduction molds for jewelry, miniatures, and small objects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJewelry \u0026amp; Goldsmithing – \u003c\/strong\u003e molds for rings, pendants, and filigree work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel Building \u0026amp; Prototyping – \u003c\/strong\u003e precise reproductions of small technical parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEducation \u0026amp; Workshops – \u003c\/strong\u003e accessible to beginners thanks to simple 1:1 hand mixing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTake equal parts of A and B components by weight (1:1).\u003c\/li\u003e\n\u003cli\u003eKnead both components thoroughly by hand until a uniform sand color is achieved.\u003c\/li\u003e\n\u003cli\u003eProcess the mixed paste within the 1.5-minute pot life.\u003c\/li\u003e\n\u003cli\u003ePress the silicone over or around the model and wait 5 minutes at 20°C.\u003c\/li\u003e\n\u003cli\u003eDemold once the silicone has fully cured and no longer feels sticky.\u003c\/li\u003e\n\u003cli\u003eFull strength is reached after 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eAddition-cure silicone warning:\u003c\/strong\u003e Stensil ECO is a platinum-addition silicone that can be poisoned by sulfur, nitrogen, amino compounds, and metal salts. These substances are found, among other things, in many latex gloves, some plasticines, paints, adhesives, condensation-cure silicones, 1-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography\/SLA). If in doubt, first test on a small area or apply a protective layer of \u003ca href=\"https:\/\/www.siliconesandmore.com\/products\/siliconesandmore-poly-vinyl-alcohol-lossingsmiddel\" target=\"_blank\" rel=\"noopener\"\u003epolyvinyl alcohol\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSilconic GmbH \u0026amp; Co. KG\u003c\/strong\u003e is a German manufacturer of high-quality silicone elastomers with production in Lonsee. Since 2004, the company has been developing dental silicones under its own brands and is among the leading producers of RTV-2 silicones in Europe.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eAre you unsure if Shore A 30 is the correct hardness for your impression application? Our technical team is happy to help you choose between the different Stensil ECO hardnesses. Contact us via our website for personalized advice.\u003c\/p\u003e","brand":"Silconic","offers":[{"title":"500 Gr. set","offer_id":49531862942037,"sku":"S11362","price":21.0,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531862974805,"sku":"S11463","price":247.81,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/silconic-silconic-stensil-eco-30-zandkleurig-kneedbare-silicone-voor-48098036318549.jpg?v=1774958808"},{"product_id":"elastosil-fx-slow","title":"Wacker Elastosil FX - Slow","description":"\u003cp\u003ePlease note, FX Slow is now called PT 88. Slow down the standard curing time of the Wacker Elastosil FX silicone by adding the FX Slow. First weigh and mix the required amount of silicone as described. Then add the Wacker Elastosil FX Slow Cure in the desired amount. Then stir well again.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-elastosil-fx-slow-cure.jpg?v=1726531261\" alt=\"\" width=\"662\" height=\"787\" \/\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eELASTOSIL® FX products are best stored between 5°C and 30°C,  in the tightly closed original packaging. The expiration date of each batch is printed on the label.\u003c\/p\u003e\r\n\u003cp\u003eStorage after the date stated on the label does not necessarily mean that the product is no longer usable. In this case, the properties necessary for the intended use will have to be checked for quality.\u003c\/p\u003e\r\n\u003cp\u003eUse residual material in packaging as soon as possible. Close the package immediately after use.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"SDS Wacker Elastosi FX Softener\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- SDS Wacker Elastosil FX Softener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"EN - Product Information Wacker Elastosil FX Additives.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Wacker Elastosil FX Additives.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct Information Wacker Elastosil FX Additives\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"SDS Wacker Elastosi FX Softener\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - SDS Wacker Elastosil FX Slow.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eSafety Data Sheet Wacker Elastosil FX Slow\u003c\/a\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"50 ml","offer_id":49531864514901,"sku":"A11534","price":25.95,"currency_code":"EUR","in_stock":false},{"title":"500 grams","offer_id":49531864547669,"sku":"A11559","price":165.0,"currency_code":"EUR","in_stock":false},{"title":"1 kilogram","offer_id":49531864580437,"sku":"A11515","price":363.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-fx-slow-48098041332053.jpg?v=1769616353"},{"product_id":"siliconen-lsr-topcoat-he-matterend-en-wrijvingsver","title":"Momentive Silopren LSR Topcoat HE – Matting and Abrasion Resistant Silicone Coating for LSR, HTV \u0026 RTV","description":"\u003ch2\u003eMatting and durable coating for silicone surfaces\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSilopren LSR Topcoat HE\u003c\/strong\u003e is a two-component silicone coating that you apply to cured silicones to mattify the surface and give it a durable finish. Momentive developed the coating as a durable layer for printed silicone elastomers based on LSR. Mixing is done 1:1, the mixed product remains workable for three days at 20 °C, and curing takes place in a ventilated hot air oven at 100 to 180 °C. The HE addition stands for high elongation; the layer stretches with a flexible substrate.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent adhesion to silicones:\u003c\/strong\u003e suitable for LSR, heat-curing silicone rubbers (HTV) and room-temperature vulcanisates (RTV). The surface only needs to be dust and grease-free; no further pretreatment is necessary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh elongation:\u003c\/strong\u003e the layer does not tear immediately when the silicone substrate bends or stretches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion resistant:\u003c\/strong\u003e 100 cycles on the Norman Tool Tester at 175 g and 50 µm dry film thickness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte, colourless finish:\u003c\/strong\u003e removes the gloss from the surface without changing the colour of the underlying material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh reactivity:\u003c\/strong\u003e the coating crosslinks quickly as soon as the layer reaches temperature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeutral odour and taste:\u003c\/strong\u003e the cured layer does not emit its own odour or taste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable and flexible at low temperatures:\u003c\/strong\u003e the layer remains flexible when the part gets cold.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong pot life:\u003c\/strong\u003e three days at 20 °C, so you don't have to mix per charge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdiv style=\"background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;\"\u003e\n\u003ch3\u003e⚠️ Industrial product, not a DIY coating\u003c\/h3\u003e\n\u003cp\u003eTwo reasons why this product does not belong in a hobby workshop:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✓ \u003cstrong\u003eCuring can only be done in an oven.\u003c\/strong\u003e The datasheet specifies one route: 100 to 180 °C in a ventilated hot air oven, immediately after spraying. Without this equipment, the coating will not cure as intended.\u003c\/li\u003e\n\u003cli\u003e✓ \u003cstrong\u003eComponent A consists of 90 to 100% decamethylcyclopentasiloxane\u003c\/strong\u003e (D5, CAS 541-02-6). Momentive lists this substance in the safety data sheet under REACH Annex XVII, substances subject to restrictions on placing on the market and use, and on the candidate list of substances of very high concern. We therefore supply this product for industrial processing, including surface treatment of non-metallic parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you are unsure whether your application falls under this, please contact us before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv style=\"background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;\"\u003e\n\u003ch3\u003e⚠️ What FDA and BfR compliance does and does not say\u003c\/h3\u003e\n\u003cp\u003eMomentive declares that the \u003cstrong\u003eingredients\u003c\/strong\u003e with which LSR Topcoat HE is formulated comply with 21 CFR 177.2600, rubber articles intended for repeated use, and with BfR recommendation XV Silicone. This is a statement about the composition, not about your end product.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e✓ Compliance applies to the material as supplied by Momentive\u003c\/li\u003e\n\u003cli\u003e✓ Layer thickness, degree of curing, oven temperature, and the substrate also determine whether your coated part complies\u003c\/li\u003e\n\u003cli\u003e✓ Both regulations set requirements for extractable substances, which you test on the end product\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you manufacture parts for repeated food contact, have the coated end product assessed by an accredited laboratory. There is no USP Class VI or ISO 10993 assessment for LSR Topcoat HE. These tests belong to the standard LSR Topcoat (TP 3719), a different product with different properties.\u003c\/p\u003e\n\u003c\/div\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e✓ Matting of glossy silicone parts\u003c\/li\u003e\n\u003cli\u003e✓ Durable finish for printed LSR parts, such as keypads and control panels\u003c\/li\u003e\n\u003cli\u003e✓ Protective layer on silicones that are mechanically stressed or bent\u003c\/li\u003e\n\u003cli\u003e✓ Finishing of HTV and RTV parts that require a matte appearance\u003c\/li\u003e\n\u003cli\u003e✓ Parts for repeated food contact, within the frameworks mentioned above\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir or shake component A and component B thoroughly and separately before use.\u003c\/li\u003e\n\u003cli\u003eWeigh A and B in a 1:1 ratio.\u003c\/li\u003e\n\u003cli\u003eMix for approximately 5 minutes with a suitable mixer at a moderate shear rate.\u003c\/li\u003e\n\u003cli\u003eEnsure that the surface to be coated is dust and grease-free; no further pretreatment is necessary.\u003c\/li\u003e\n\u003cli\u003eApply the coating by spraying. For longer spraying sessions, use a continuous mixing device in the supply tank to keep the mixture homogeneous.\u003c\/li\u003e\n\u003cli\u003eCure immediately after spraying in a ventilated hot air oven at 100 to 180 °C. Ensure sufficient fresh air supply, otherwise surface disturbances may occur.\u003c\/li\u003e\n\u003cli\u003eClean tools and equipment with a non-polar solvent.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eThe datasheet does not specify a fixed curing time; this depends on the oven temperature and layer thickness. A higher temperature of the mixed product significantly shortens the processing time.\u003c\/p\u003e\u003ch3\u003ePrecautions for use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e✓ This is an addition system. Sulfur-containing clay, latex, PVC, uncured polyurethane and epoxy, cyanoacrylate, and residues of condensation silicones can inhibit curing. If in doubt, test on a sample piece first.\u003c\/li\u003e\n\u003cli\u003e✓ Component A has a flash point of 73 °C and component B of 76 °C. Keep the coating away from open flames and hot surfaces, and ensure good ventilation during spraying.\u003c\/li\u003e\n\u003cli\u003e✓ The product is classified as H412, harmful to aquatic life with long-lasting effects. Prevent release into the environment and dispose of residues and packaging via an authorized processor.\u003c\/li\u003e\n\u003cli\u003e✓ Shelf life 6 months from production date, in the original sealed packaging, stored dry at a maximum of 27 °C and less than 60% relative humidity. The exact date is stated on the analysis certificate.\u003c\/li\u003e\n\u003cli\u003e✓ Use component A and component B only together as supplied and do not interchange caps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eIf you want to know if LSR Topcoat HE adheres to your specific silicone, or if you need documentation on FDA and BfR compliance, please contact us at info@siliconesandmore.com. Please provide information about the base material, the desired layer thickness, and the oven temperature you have available, and we will determine if this is the correct coating or if the standard LSR Topcoat is a better fit.\u003c\/p\u003e","brand":"Momentive Performance Materials","offers":[{"title":"100 gram Kit","offer_id":49531868184917,"sku":"S11078","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"500 gram Kit","offer_id":49531868217685,"sku":"S11085","price":145.0,"currency_code":"EUR","in_stock":true},{"title":"1 kg. Kit","offer_id":49531868250453,"sku":"S11205","price":282.0,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531868283221,"sku":"S11326","price":2740.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/momentive-performance-materials-lsr-topcoat-he-48098040676693.jpg?v=1727352884"},{"product_id":"siliconen-lijm-elastosil-e43n","title":"Wacker ELASTOSIL® E43 N Transparent, Silicone Adhesive for Food Contact and Addition Silicones","description":"\u003ch2\u003eRTV-1 silicone adhesive for food contact and addition cure silicones\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® E43 N Transparent\u003c\/strong\u003e is a one component, condensation curing silicone adhesive based on acetoxy chemistry. It cures at room temperature under the influence of air moisture to form a permanently flexible silicone rubber with very good mechanical properties. The consistency ranges from non slump to self levelling.\u003c\/p\u003e\n\u003cp\u003eThe key difference from the standard \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/en\/products\/elastosil-e43\" target=\"_blank\"\u003eE43\u003c\/a\u003e is that E43 N does not inhibit the cure of platinum cured addition silicones, and that once fully cured and given appropriate processing it is suitable for the manufacture of articles intended to come into contact with food. Available in 90 ml and 310 ml cartridges.\u003c\/p\u003e\n\u003ch3\u003eKey benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eSuitable for food contact:\u003c\/strong\u003e once fully cured and provided appropriate processing, see the conditions below\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNo inhibition of addition cure silicones:\u003c\/strong\u003e does not interfere with platinum cured silicones, essential in silicone workshops\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNon slump to self levelling:\u003c\/strong\u003e thixotropic, stays in place on vertical surfaces and flows out smoothly on horizontal ones\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHigh mechanical strength:\u003c\/strong\u003e tensile strength 7.8 N\/mm² and tear strength 12.5 N\/mm\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUV and weathering resistant:\u003c\/strong\u003e retains elasticity and transparency under prolonged UV exposure and changing climatic conditions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eElectrically insulating:\u003c\/strong\u003e suitable for electronics applications, potting and sealing of components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly and repair of culinary silicone moulds and kitchen utensils\u003c\/li\u003e\n\u003cli\u003eSilicone workshops: bonding and sealing alongside platinum cured silicones without inhibition risk\u003c\/li\u003e\n\u003cli\u003eElectronics and potting: sealing of components, sensors and housings\u003c\/li\u003e\n\u003cli\u003eHousehold appliances, machine building, heating and cooling\u003c\/li\u003e\n\u003cli\u003eFormed in place gaskets\u003c\/li\u003e\n\u003cli\u003eLaboratory and workshop: general purpose silicone adhesive for repair and assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFood contact\u003c\/h3\u003e\n\u003cp\u003eProvided appropriate processing, fully cured ELASTOSIL® E43 N Transparent is suitable for the manufacture of materials and articles intended to come into contact with food according to Regulation (EC) No 1935\/2004. Compliance of the finished article must be ensured by its manufacturer. Regulation (EU) No 10\/2011 does not apply, silicones are excluded from its scope. Regulation (EC) No 2023\/2006 does not apply either, as this product is a starting material.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNational and regional assessments according to the Wacker Regulatory Product Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eGermany, BfR Recommendation XV Silicones:\u003c\/strong\u003e the ingredients comply, with a limit of maximum 0.5 percent volatiles for the cured elastomer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFrance, Arrêté of 25 November 1992:\u003c\/strong\u003e compliant, maximum 0.5 percent volatiles, total migration from the finished article maximum 10 mg\/dm² or 60 mg\/kg\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUnited States:\u003c\/strong\u003e a food contact statement can be provided separately upon request\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBrazil and Mercosur:\u003c\/strong\u003e the ingredients are listed in ANVISA IN 435\/2026 and\/or Mercosur GMC Resolution 34\/2025, maximum 0.5 percent volatiles and maximum 0.5 percent extractables\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eChina:\u003c\/strong\u003e the product does not comply with GB 9685-2016 and does not comply with GB 4806.16-2025\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConditions for food contact use:\u003c\/strong\u003e the product must be fully cured, acetic acid must no longer be released when the product contacts food, and the product contains small amounts of residual solvents that must be removed from the finished article.\u003c\/p\u003e\n\u003cp\u003eThe admissibility of the ingredients does not mean that the final product is considered safe for food contact by regulatory authorities. Responsibility for the finished article and for migration, extraction and volatiles testing rests with the manufacturer of that final product.\u003c\/p\u003e\n\u003ch3\u003eTechnical characteristics\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComparison with E43:\u003c\/strong\u003e E43 N has a higher tensile strength than the standard E43, 7.8 against 6.5 N\/mm², and a lower elongation at break, 450 against 500 percent. Its distinctive advantage is that it does not inhibit the cure of addition silicones. Choose E43 N when working alongside platinum cured silicones or when food contact is involved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eAbrade the substrate and remove dust and contamination\u003c\/li\u003e\n\u003cli\u003eDegrease with white spirit or alcohol and allow to evaporate completely\u003c\/li\u003e\n\u003cli\u003eApply E43 N and spread evenly\u003c\/li\u003e\n\u003cli\u003eSkin formation after 5 to 10 minutes at 23 °C and 50 percent relative humidity\u003c\/li\u003e\n\u003cli\u003eThrough cure approximately 1.6 mm per day. The cure rate is limited by moisture diffusion into the rubber, so free access of air moisture is essential\u003c\/li\u003e\n\u003cli\u003eHeat curing only for layer thicknesses below 0.5 mm, otherwise blistering occurs due to the rapid release of acetic acid\u003c\/li\u003e\n\u003cli\u003eFor food contact applications, allow a full cure until no more acetic acid is released and the residual solvents have left the finished article\u003c\/li\u003e\n\u003cli\u003eAlways run preliminary tests on the actual substrate\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSafety information:\u003c\/strong\u003e during curing a total of approximately 3.5 percent by weight of acetic acid is released. Work only in well ventilated areas. Avoid contact of the uncured product with eyes and mucous membranes. In case of eye contact, rinse immediately with plenty of water. The product is not classified as a hazardous substance or mixture under Regulation (EC) No 1272\/2008. Refer to the safety data sheet for full information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e has more than a hundred years of experience in silicone technology for industrial sealing, electronics and food contact applications.\u003c\/p\u003e\n\u003ch3\u003eTechnical support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on substrate preparation, adhesion properties, the difference between E43 and E43 N, and optimal results for your specific sealing or bonding application. Contact us for the technical data sheet, the safety data sheet or the Regulatory Product Information.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"Cartridge 90 ml","offer_id":50344003731797,"sku":"A90519","price":22.95,"currency_code":"EUR","in_stock":true},{"title":"Cartridge 310 ml ","offer_id":49531868578133,"sku":"A11656","price":38.98,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-e43-n-transparent-voedselveilige-silicone-l-48098043068757.jpg?v=1778159098"},{"product_id":"elastosil-fx-thixo","title":"Wacker Elastosil FX Thixo","description":"\u003cp\u003eThe Wacker FX Thixo is a thickener especially for the Wacker FX silicone. This makes the silicone thicker to pasty.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-elastosil-fx-thixo.jpg?v=1726531260\" alt=\"\" width=\"650\" height=\"265\" \/\u003e\u003c\/p\u003e\r\n\u003cp\u003eRecommended dosing:\u003cbr \/\u003e0% = best fluidity\u003cbr \/\u003e0.2% = medium fluidity\u003cbr \/\u003e0.5% = no fluidity\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eELASTOSIL® FX products are best stored between 5°C and 30°C,  in the tightly closed original packaging. The expiration date of each batch is printed on the label.\u003c\/p\u003e\r\n\u003cp\u003eStorage after the date stated on the label does not necessarily mean that the product is no longer usable. In this case, the properties necessary for the intended use will have to be checked for quality.\u003c\/p\u003e\r\n\u003cp\u003eUse residual material in packaging as soon as possible. Close the package immediately after use.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"SDS Wacker Elastosi FX Softener\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- SDS Wacker Elastosil FX Softener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"EN - Product Information Wacker Elastosil FX Additives.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Wacker Elastosil FX Additives.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct Information Wacker Elastosil FX Additives\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"Sicherheitsdatenblatt Wacker Elastosil FX Thixo\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - SDS Wacker Elastosil FX Thixo.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eSafety Data Sheet Wacker Elastosil FX Thixo\u003c\/a\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"50 grams","offer_id":49531868774741,"sku":"A11533","price":25.95,"currency_code":"EUR","in_stock":false},{"title":"500 grams","offer_id":49531868840277,"sku":null,"price":190.0,"currency_code":"EUR","in_stock":false},{"title":"1 kilogram","offer_id":49531868873045,"sku":"A11513","price":363.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-fx-thixo-48098041397589.jpg?v=1769616375"},{"product_id":"elastosil-fx-fast","title":"Wacker Elastosil FX - Fast","description":"\u003cp\u003eSpeed up the standard curing time of the Wacker Elastosil FX silicone by adding the FX Fast. First weigh and mix the required amount of silicone as described. Then add the Wacker Elastosil FX Fast in the desired amount. Then stir well again.\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-elastosil-fx-fast-cure.jpg?v=1726531261\" alt=\"\" width=\"664\" height=\"756\" \/\u003e\u003c\/p\u003e\r\n\u003cp\u003eHinweis: Der obige Zeitplan gilt für Tropfen pro 100 Gramm Elastosil FX A\/B.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eELASTOSIL® FX products are best stored between 5°C and 30°C,  in the tightly closed original packaging. The expiration date of each batch is printed on the label.\u003c\/p\u003e\r\n\u003cp\u003eStorage after the date stated on the label does not necessarily mean that the product is no longer usable. In this case, the properties necessary for the intended use will have to be checked for quality.\u003c\/p\u003e\r\n\u003cp\u003eUse residual material in packaging as soon as possible. Close the package immediately after use.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"SDS Wacker Elastosi FX Softener\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- SDS Wacker Elastosil FX Softener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"EN - Product Information Wacker Elastosil FX Additives.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Wacker Elastosil FX Additives.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct Information Wacker Elastosil FX Additives\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"SDS Wacker Elastosi FX Softener\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- SDS Wacker Elastosil FX Softener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"Safety Data Sheet Wacker Elastosil FX Fast\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - SDS Wacker Elastosil FX Fast.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet Wacker Elastosil FX Fast\u003c\/a\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"50 grams","offer_id":49531868807509,"sku":"A11535","price":146.0,"currency_code":"EUR","in_stock":true},{"title":"1 kilogram","offer_id":49531868905813,"sku":"A11535","price":2350.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-fx-fast-48098041266517.jpg?v=1769616353"},{"product_id":"elastosil-rt-623","title":"Wacker Elastosil® RT 623 A\/B – Red-Brown Addition Silicone for Pad Printing \u0026 Printing Pads","description":"\u003ch2\u003ePremium Red-Brown Addition Silicone for Professional Pad Printing and Printing Pad Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker Elastosil® RT 623 A\/B\u003c\/strong\u003e is a pourable, addition-curing, two-component platinum-based silicone that vulcanizes at room temperature without chemical shrinkage. Component A is a white paste with a viscosity of 15,000 mPa·s, component B is a liquid red-brown fluid of 800 mPa·s, mixed together in a weight ratio of 9:1 (A:B). The cured rubber has a Shore A hardness of approximately 31, a density of 1.12 g\/cm³, and a remarkably high tear strength of over 30 N\/mm. With a pot life of 30 minutes at 23°C and a tack-free curing time of 5 hours at room temperature — significantly accelerated by heat — the material has been specifically developed as a base material for the production of printing pads for the pad printing industry.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShore A 31\u003c\/strong\u003e – medium hardness that is ideal for pad-printing applications where form elasticity and durability must be balanced.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTear Strength \u0026gt; 30 N\/mm\u003c\/strong\u003e – exceptionally high mechanical strength (ASTM D 624 B) ensures a long service life of printing pads at high production speeds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength 7.5 N\/mm² with 700% Elongation at Break\u003c\/strong\u003e – combination of strength and flexibility to withstand thousands of printing cycles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLinear Shrinkage \u0026lt; 0.1%\u003c\/strong\u003e – dimensionally stable, essential for reproducible printing results and exact detail reproduction.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot Life 30 minutes – Curing Time 5 hours at 23°C\u003c\/strong\u003e – ample processing time with rapid demolding, can be accelerated by heating.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMixing Ratio 9:1 (A:B) by weight\u003c\/strong\u003e – easy to weigh and suitable for mechanical dosing equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eProduction of printing pads for pad-printing on keyboards, toys, and sports equipment\u003c\/li\u003e\n  \u003cli\u003ePrinting on irregular surfaces and multi-level substrates in the automotive industry\u003c\/li\u003e\n  \u003cli\u003eIndustrial printing on electronic components and housings\u003c\/li\u003e\n  \u003cli\u003ePads for high print runs (more than 100,000 prints per pad) at print speeds above 1,000 prints per hour\u003c\/li\u003e\n  \u003cli\u003ePrinting pads where print precision of less than 0.01 mm is required\u003c\/li\u003e\n  \u003cli\u003eReplacement of worn pads in existing pad printing machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThoroughly stir component A and component B separately\u003c\/strong\u003e before use to evenly distribute sedimented fillers and pigments. Component A is a paste and requires more vigorous stirring than component B.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMix components in a weight ratio of 9:1 (A:B).\u003c\/strong\u003e Important: use only A and B components with the same lot number (batch number) — cross-mixing of different batches leads to abnormal curing and mechanical properties.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMix slowly and thoroughly\u003c\/strong\u003e until a homogeneous red-brown color is achieved without streaks or spots. Regularly scrape the walls and bottom of the mixing vessel. Avoid air entrapment by stirring slowly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptionally vacuum the mixture\u003c\/strong\u003e at 10–20 mbar for several minutes to remove entrapped air. For pad production, this is highly recommended to prevent air inclusions in the printing surface.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePour within the 30-minute pot life\u003c\/strong\u003e (at 23°C) in a thin stream and from a low height at one point to minimize air entrapment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAllow to cure for 5 hours at 23°C\u003c\/strong\u003e until tack-free. Full curing and optimal mechanical properties are achieved within 24 hours. The curing time can be significantly reduced by post-curing at elevated temperatures (e.g., 70°C).\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch3\u003eInhibition Warning\u003c\/h3\u003e\n\u003cp\u003eWacker Elastosil® RT 623 A\/B is an addition- (platinum) curing silicone and is sensitive to curing inhibition. Avoid contact with sulfur and sulfur-containing compounds (natural rubber, EPDM, polysulfides), amine-containing substances (amine-cured epoxy resins, polyurethanes), organotin compounds (including condensation silicone catalysts) and uncured latex. If in doubt, test a small amount on the model surface before processing the full amount.\u003c\/p\u003e\n\n\u003ch3\u003eAbout the Manufacturer\u003c\/h3\u003e\n\u003cp\u003eWacker Chemie AG is a world market leader in the development and production of silicones for industrial and technical applications. From Burghausen (Germany), Wacker has been supplying high-quality silicone rubbers to the pad printing, mold making, prototyping, and composites industries since 1947.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eDo you have specific questions about the choice of a printing pad silicone, the correct hardness for your substrate, or the influence of oil dilution (Wacker Silicone Fluid AK 35) on the Shore hardness? Our technical specialists are happy to assist. Contact us via chat, phone, or email — we will be happy to help you select the right material for your production process.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1kg. Set (0.9 kg. A + 0.1 kg. B)","offer_id":49531869692245,"sku":"S11694","price":49.85,"currency_code":"EUR","in_stock":true},{"title":"5 kg. Set (4.5 kg. A + 0.5 kg. B)","offer_id":49531869757781,"sku":"S11382","price":230.61,"currency_code":"EUR","in_stock":false},{"title":"20kg. Set (18 kg. A + 2 kg. B)","offer_id":49531869823317,"sku":"S11630","price":905.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-rt-623-ab-roodbruine-additie-silicone-voor-48098042478933.jpg?v=1779872723"},{"product_id":"elastosil-fx-softener","title":"Wacker Elastosil FX - Softener","description":"\u003cp\u003eAdjust Your Preferred Hardness by Adding ELASTOSIL® FX Softener.\u003cbr \/\u003eBy adding ELASTOSIL® FX Softener, you can bring down the hardness of your \u003cbr \/\u003eELASTOSIL® FX base rubber to achieve more “flesh-like” textures. The softer you go, the greater the tack will be, but the surface will never be oily.\u003c\/p\u003e\n\u003cp\u003eFirst weigh and mix the amount of base material you need as described under Weighing \u0026amp; Mixing.\u003cbr \/\u003eThen add the required amount of ELASTOSIL® FX Softener and again stir thoroughly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is not an inert silicone oil.\u003c\/strong\u003e The FX Softener is a reactive component that is built into the silicone network — which is why the surface never becomes oily. There is an upper limit, though. Dose more than Wacker specifies and the crosslink density drops so far that the material no longer cures properly, leaving a larger extractable fraction. Stay within the stated dosage and make test pieces. If you need softer than the Softener allows, blend with a softer grade of the same chemistry instead of raising the dose.\u003c\/p\u003e\n\u003cp\u003eWacker issues a separate \u003cem\u003eStatement on Biocompatibility\u003c\/em\u003e for the FX Softener: no toxicological tests have been carried out on the Softener itself, but its addition to ELASTOSIL® raw materials is not expected to have an impact on biocompatibility results. Responsibility for the finished article remains with whoever places it on the market. We send the statement on request.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-elastosil-fx-softener.jpg?v=1726531261\" alt=\"\" width=\"1000\" height=\"329\" \/\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eELASTOSIL® FX products are best stored between 5°C and 30°C,  in the tightly closed original packaging. The expiration date of each batch is printed on the label.\u003c\/p\u003e\n\u003cp\u003eStorage after the date stated on the label does not necessarily mean that the product is no longer usable. In this case, the properties necessary for the intended use will have to be checked for quality.\u003c\/p\u003e\n\u003cp\u003eUse residual material in packaging as soon as possible. Close the package immediately after use.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"SDS Wacker Elastosi FX Softener\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- SDS Wacker Elastosil FX Softener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"EN - Product Information Wacker Elastosil FX Additives.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Wacker Elastosil FX Additives.pdf\" target=\"_blank\" rel=\"noopener\"\u003eProduct Information Wacker Elastosil FX Additives\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca title=\"Safety data sheet Wacker Elastosil FX Softener\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - SDS Wacker Elastosil FX Softener.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eSafety data sheet Wacker Elastosil FX Softener\u003c\/a\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"250 grams","offer_id":49531870183765,"sku":"S11135","price":19.5,"currency_code":"EUR","in_stock":false},{"title":"1 kilogram","offer_id":49531870216533,"sku":"S11136","price":68.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-fx-softener-48098041135445.jpg?v=1769616353"},{"product_id":"siliconen-additie-skinform-set","title":"Zhermack SkinForm (ZA 22 Thixo Body) – Brushable Body Silicone for Bodycasting \u0026 SFX Moulds","description":"\u003ch2\u003eBrushable thixotropic silicone for bodycasting and SFX moulds\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eZhermack SkinForm\u003c\/strong\u003e (ZA 22 Thixo Body Silicone) is a two component thixotropic addition cure silicone supplied by Zhermack for moulding body parts. The brushable consistency stays on vertical surfaces without running, picks up fine skin texture accurately and is tear resistant once cured. It mixes 1:1 by weight, the working time is 10 minutes and it can be carefully demoulded after about 25 minutes.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eThixotropic consistency:\u003c\/strong\u003e stays on vertical surfaces without running, ideal for brushable work on the body.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFast cycle:\u003c\/strong\u003e 10 minutes working time and demoulding after about 25 minutes, so your model does not have to sit still for long.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh tear strength:\u003c\/strong\u003e 14 N\/mm, so thin edges and undercuts do not tear easily during demoulding.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh detail reproduction:\u003c\/strong\u003e picks up skin texture and fine detail accurately with minimal distortion.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eShore A 22:\u003c\/strong\u003e firm enough to hold detail, flexible enough to demould over undercuts.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh ageing resistance:\u003c\/strong\u003e moulds and impressions keep their properties over time.\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv style='background: #fff3cd; border: 2px solid #ffc107; color: #856404; padding: 25px; border-radius: 10px; margin: 30px 0;'\u003e\u003ch3 style='color: #856404; margin-top: 0;'\u003e⚠️ What we do and do not claim about skin contact\u003c\/h3\u003e\u003cp\u003eIn the technical data sheet for ZA 22 Thixo Body (December 2022), Zhermack lists \u003cem\u003e“compatibility with skin”\u003c\/em\u003e as a property and body casting as the application. That entry names \u003cstrong\u003eno standard, no test institute, no contact duration and no report\u003c\/strong\u003e. It is therefore a manufacturer statement, not a test report.\u003c\/p\u003e\u003cp\u003eIn addition, this product was \u003cstrong\u003enot part\u003c\/strong\u003e of the ISO 10993-1 biocompatibility study that Zhermack had carried out on ZA SFX 0020 and ZA SFX 10 WT 10. We therefore do not call SkinForm biocompatible.\u003c\/p\u003e\u003cp\u003eFor short duration moulding on intact skin this is a common material. If your application involves prolonged skin contact, an end product that stays on or in the body, or a medical device, choose Zhermack ZA SFX 0020 or ZA SFX 10 WT 10 and have the cured end product tested by an accredited laboratory. If you are unsure, contact us at info@siliconesandmore.com.\u003c\/p\u003e\u003c\/div\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Bodycasting and lifecasting of face, hands, torso and other body parts\u003c\/li\u003e\u003cli\u003e✓ SFX moulds for masks and theatrical prosthetics\u003c\/li\u003e\u003cli\u003e✓ Cosplay and theatre, accurate skin impressions for costumes and character prosthetics\u003c\/li\u003e\u003cli\u003e✓ Orthopaedic and medical models\u003c\/li\u003e\u003cli\u003e✓ Sculpture and lifelike reproductions of body parts\u003c\/li\u003e\u003cli\u003e✓ Education and workshops\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMix the components 1:1 by weight. Preferably by hand, since machine mixing whips in too much air.\u003c\/li\u003e\u003cli\u003eWork with two people and a model. One mixes, the other applies.\u003c\/li\u003e\u003cli\u003eApply petroleum jelly or hair release on lightly haired or short haired areas. We do not recommend this product on long hair, use a \u003ca href='https:\/\/www.siliconesandmore.com\/en\/products\/glatzan-bald-cap' rel='noopener' target='_blank'\u003ebald cap\u003c\/a\u003e instead.\u003c\/li\u003e\u003cli\u003eApply the silicone in even layers and work within the 10 minute working time.\u003c\/li\u003e\u003cli\u003eAlways make a support shell. The silicone picks up very fine detail but is not dimensionally stable on its own. Preferably use \u003ca href='https:\/\/www.siliconesandmore.com\/en\/products\/gips-gipsverband' rel='noopener' target='_blank'\u003eplaster bandage\u003c\/a\u003e, applied once the silicone has set and is still on the body. A two part support shell gives better results. Plaster bandage does not bond to the silicone.\u003c\/li\u003e\u003cli\u003eDemould carefully after about 25 minutes. The mould is fully cured after 24 hours.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eNote: working time and demould time apply at 20 °C and get shorter in a warm environment or on warm skin.\u003c\/p\u003e\u003ch3\u003ePoints to watch\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This is an addition cure silicone. Sulphur, nitrogen, amino compounds and metal salts can poison the cure. These occur in latex gloves, cigarette smoke, some plasticine clays, condensation silicones and 3D printing materials.\u003c\/li\u003e\u003cli\u003e✓ Test on a small scale if in doubt.\u003c\/li\u003e\u003cli\u003e✓ Work on clean, grease free and dry surfaces and do not swap the caps of the components.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eIf you are unsure about the right technique, support shell or application, contact us at info@siliconesandmore.com.\u003c\/p\u003e","brand":"Zhermack","offers":[{"title":"1 kilogram","offer_id":49531873198421,"sku":"S10895","price":54.0,"currency_code":"EUR","in_stock":true},{"title":"10 kilograms","offer_id":49531873231189,"sku":"S11139","price":499.0,"currency_code":"EUR","in_stock":true},{"title":"0.5 Kg Set (0.25 Kg A + 0.25 Kg B)","offer_id":50645739798869,"sku":"S10894","price":32.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/zhermack-zhermack-skinform-spatelbare-huidsilicone-voor-bodycasting-48098045493589.jpg?v=1775031387"},{"product_id":"cenusil-m-830-106930566","title":"Cenusil M 830","description":"\u003cul class=\"checkList\"\u003e\r\n\u003cli\u003egood flow ability and self-deaeration\u003c\/li\u003e\r\n\u003cli\u003eproper tear strength\u003c\/li\u003e\r\n\u003cli\u003euniversal hardness (26 Shore A)\u003c\/li\u003e\r\n\u003cli\u003eeasy to meter and mix due to 1 : 1 ratio\u003c\/li\u003e\r\n\u003cli\u003eperfect and non-shrink cure at room temperature which can be accelerated considerably by the application of heat\u003c\/li\u003e\r\n\u003cli\u003eexcellent long- term stability of the mechanical properties of the vulcanizate\u003c\/li\u003e\r\n\u003cli\u003egood resistance to common reproduction materials\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cem\u003eThis product is intended for the business market. For larger quantities or customized products, you can contact us via info@siliconesandmore.com.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003ca href=\"https:\/\/docs.nedform.com\/MTDS\/MTDS%20- CENUSIL M 830 AB.pdf\"\u003eTecnical data sheet Cenusil M 830 A\/B\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/MSDS\/EN\/MSDS%20-%20Wacker M 830 A.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eSafety Data Sheet Cenusil M 830 A\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/MSDS\/EN\/MSDS%20-%20Wacker M 830 B.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eSafety Data Sheet Cenusil M 830 B\u003c\/a\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"50 kg. Set (25 A + 25 B)","offer_id":49531877163349,"sku":"A10472","price":1100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-cenusil-m-830-48098050113877.jpg?v=1727353433"},{"product_id":"cenusil-m-825","title":"Wacker Cenusil® M 825 A\/B – Pourable Addition Silicone for Concrete Molds \u0026 Reproduction Molds","description":"\u003ch2\u003ePremium Castable Addition Silicone for Professional Concrete Mold and Reproduction Module Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker CENUSIL® M 825 A\/B\u003c\/strong\u003e is a castable, addition-curing 2-component silicone rubber that cures at room temperature with a Shore A hardness of 25, a white end product, and excellent self-deairing properties. With a pot life of 60 minutes and a demolding time of 6 hours at 23°C, this product offers ample processing time for complex molds. The mixing ratio is 1:1 (A:B) by weight — the simplest mixing protocol in its class. CENUSIL M 825 is ideally suited for applications where shrink-free curing, deep undercuts, and excellent resistance to common reproduction materials are essential.\u003c\/p\u003e\n\n\u003ch3\u003eKey Advantages\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1:1 Mixing Ratio by Weight:\u003c\/strong\u003e Easiest processing in its class — no weighing errors, direct application without a calculator\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcellent Self-Deairing:\u003c\/strong\u003e Low viscosity of 8,000 mPa·s and active self-deairing eliminate air bubbles without a vacuum pump\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShrink-Free Curing:\u003c\/strong\u003e No chemical shrinkage — dimensionally accurate reproductions of complex models with deep undercuts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh Tear Strength (20 N\/mm):\u003c\/strong\u003e Molds release easily even with narrow cavities, holes, and gaps without tearing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcellent Long-Term Stability:\u003c\/strong\u003e Mechanical properties remain stable over many casting cycles — ideal for series production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResistant to Common Reproduction Materials:\u003c\/strong\u003e Good resistance to casting resins, concrete, plaster, and wax\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConcrete molds for architectural elements, facade panels, and decorative concrete\u003c\/li\u003e\n  \u003cli\u003eReproduction molds of models with deep undercuts and complex geometries\u003c\/li\u003e\n  \u003cli\u003eMolds for plaster casting, synthetic resin, and restoration work in museums and heritage conservation\u003c\/li\u003e\n  \u003cli\u003ePrototyping and series production in industrial design and engineering\u003c\/li\u003e\n  \u003cli\u003eMolds for decorative objects, relief panels, and architectural ornaments\u003c\/li\u003e\n  \u003cli\u003eReproductions for the art sector and scenographic use in film and theater\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eStir components A and B separately and thoroughly before use\u003c\/li\u003e\n  \u003cli\u003eMix A and B in a 1:1 weight ratio — use only components with the same lot number\u003c\/li\u003e\n  \u003cli\u003eMix slowly and carefully in a figure-8 motion to minimize air entrapment\u003c\/li\u003e\n  \u003cli\u003eOptional: vacuum immediately after mixing (processing is still possible up to 60,000 mPa·s)\u003c\/li\u003e\n  \u003cli\u003ePour within the 60-minute pot life\u003c\/li\u003e\n  \u003cli\u003eAllow to cure for at least 6 hours at 23°C — accelerated curing is possible by increasing the temperature\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker Chemie AG\u003c\/strong\u003e is a world leader in the development and production of silicones for industrial and technical applications. The CENUSIL series is specifically developed for reproduction and concrete mold applications where dimensional accuracy and durability are paramount.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Warning: Inhibition in Addition Silicones\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the materials you are using (gloves, spatulas, molds) contain these substances, first do a small test. Inhibiting substances are found, among others, in latex gloves, some plasticines, condensation silicones, 1-component silicone sealants, and certain 3D printing materials. If in doubt, apply a layer of polyvinyl alcohol (PVA) as a release agent.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on processing techniques, mold design optimization, curing acceleration, and the right choice for your specific concrete mold or reproduction module application. Contact us for technical data sheets, processing manuals, or product advice.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"10 kg. Set (5 A + 5 B) B2B","offer_id":49531878572373,"sku":"S10035","price":290.0,"currency_code":"EUR","in_stock":true},{"title":"50 kg. Set (25 A + 25 B) B2B","offer_id":49531878703445,"sku":"S10036","price":1395.0,"currency_code":"EUR","in_stock":true},{"title":"400kg. Set (200 A + 200 B) B2B","offer_id":49531878801749,"sku":"15000","price":10600.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-cenusil-m-825-ab-gietbare-additie-silicone-voor-beto-48098050277717.png?v=1779361497"}],"url":"https:\/\/siliconesandmore.com\/en\/collections\/all-silicones.oembed?page=3","provider":"siliconesandmore","version":"1.0","type":"link"}