{"title":"Food-Safe Silicone - FDA Approved Silicone for Culinary Molds ","description":"\u003cdiv style=\"max-width: 1200px; margin: 0 auto;\"\u003e\n\u003cheader style=\"text-align: center; margin-bottom: 40px; padding: 30px 20px; background: linear-gradient(135deg, #f8f9fa 0%, #e9ecef 100%); border-radius: 12px;\"\u003e\n\u003ch1 style=\"color: #2c3e50; margin-bottom: 15px; font-size: 2.2em;\"\u003eVoedselveilige Siliconen voor Culinaire Mallen\u003c\/h1\u003e\n\u003cp style=\"font-size: 1.2em; color: #6c757d; max-width: 600px; margin: 0 auto;\"\u003eProfessionele \u003cstrong\u003eFDA goedgekeurde siliconen\u003c\/strong\u003e voor het maken van veilige \u003cstrong\u003eculinaire mallen\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/header\u003e\n\u003csection style=\"text-align: center; margin-bottom: 40px;\"\u003e\u003ciframe style=\"border-radius: 8px; box-shadow: 0 4px 15px rgba(0,0,0,0.1); max-width: 100%;\" height=\"315\" width=\"560\" src=\"https:\/\/www.youtube.com\/embed\/mwqAkDa-cv8\"\u003e\u003c\/iframe\u003e\n\u003cp style=\"margin-top: 15px; font-style: italic; color: #6c757d;\"\u003eMaak eenvoudig mallen met deze twee componenten siliconen\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection style=\"background: #fff; padding: 30px; border-radius: 12px; box-shadow: 0 4px 15px rgba(0,0,0,0.1); margin-bottom: 30px;\"\u003e\n\u003ch2 style=\"color: #2c3e50; margin-bottom: 25px; border-bottom: 3px solid #27ae60; padding-bottom: 10px;\"\u003e🍽️ Voedselveiligheid \u0026amp; Kwaliteit\u003c\/h2\u003e\n\u003cp style=\"font-size: 1.1em; line-height: 1.6; margin-bottom: 20px;\"\u003eWe begrijpen dat \u003cstrong\u003evoedselveiligheid\u003c\/strong\u003e essentieel is bij het maken van mallen voor \u003cstrong\u003eculinaire doeleinden\u003c\/strong\u003e. Hier zijn enkele belangrijke punten om rekening mee te houden:\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 30px; margin-bottom: 40px;\"\u003e\n\u003cdiv style=\"background: #fff; padding: 25px; border-radius: 10px; box-shadow: 0 4px 15px rgba(0,0,0,0.1);\"\u003e\n\u003ch3 style=\"color: #27ae60; margin-bottom: 20px; display: flex; align-items: center;\"\u003e\n\u003cspan style=\"margin-right: 10px; font-size: 1.5em;\"\u003e🛡️\u003c\/span\u003eVeiligheid Eerst\u003c\/h3\u003e\n\u003cp\u003eOnze genoemde \u003cstrong\u003esiliconen zijn voedselveilig\u003c\/strong\u003e. Dit betekent dat ze geschikt zijn voor gebruik met voedsel. Houd er echter rekening mee dat het eindproduct ook voedselveiligheid vereist. Dit hangt af van hoe goed de verwerkingsinstructies zijn gevolgd en of er geen vreemde stoffen zijn toegevoegd.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #fff; padding: 25px; border-radius: 10px; box-shadow: 0 4px 15px rgba(0,0,0,0.1);\"\u003e\n\u003ch3 style=\"color: #3498db; margin-bottom: 20px; display: flex; align-items: center;\"\u003e\n\u003cspan style=\"margin-right: 10px; font-size: 1.5em;\"\u003e🥄\u003c\/span\u003eDikte \u0026amp; Consistentie\u003c\/h3\u003e\n\u003cp\u003eAls je de \u003cstrong\u003esiliconen dikker\u003c\/strong\u003e wilt maken, raden we aan om geen thixo (dikmaakmiddelen) te gebruiken. In plaats daarvan kun je het veel veiligere \u003cstrong\u003efumed silica poeder\u003c\/strong\u003e gebruiken voor optimale voedselveiligheid.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection style=\"display: grid; grid-template-columns: 1fr 1fr; gap: 30px; margin-bottom: 40px;\"\u003e\n\u003cdiv style=\"background: #fff; padding: 25px; border-radius: 10px; box-shadow: 0 4px 15px rgba(0,0,0,0.1);\"\u003e\n\u003ch3 style=\"color: #e74c3c; margin-bottom: 20px; display: flex; align-items: center;\"\u003e\n\u003cspan style=\"margin-right: 10px; font-size: 1.5em;\"\u003e🎨\u003c\/span\u003eKleur Toevoegen\u003c\/h3\u003e\n\u003cp\u003eWil je \u003cstrong\u003evoedselveilige siliconen inkleuren\u003c\/strong\u003e? Gebruik dan onze siliconen kleurstoffen met de aanduiding \u003cstrong\u003eFDA\u003c\/strong\u003e achter de naam. Zo kun je creatieve en veilige mallen maken voor professionele culinaire toepassingen.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background: #fff; padding: 25px; border-radius: 10px; box-shadow: 0 4px 15px rgba(0,0,0,0.1);\"\u003e\n\u003ch3 style=\"color: #9b59b6; margin-bottom: 20px; display: flex; align-items: center;\"\u003e\n\u003cspan style=\"margin-right: 10px; font-size: 1.5em;\"\u003e🔧\u003c\/span\u003eVerlijmen \u0026amp; Repareren\u003c\/h3\u003e\n\u003cp\u003eVoor het \u003cstrong\u003everlijmen, plakken of repareren\u003c\/strong\u003e van voedselveilige siliconen raden we \u003ca style=\"color: #9b59b6; text-decoration: none; font-weight: bold;\" href=\"https:\/\/www.siliconesandmore.com\/products\/siliconen-lijm-elastosil-e43n\" title=\"Elastosil E43N\"\u003eElastosil E43N\u003c\/a\u003e aan.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection style=\"background: #f8f9fa; padding: 25px; border-radius: 10px; margin-bottom: 30px; text-align: center;\"\u003e\n\u003ch2 style=\"color: #2c3e50; margin-bottom: 20px;\"\u003e📚 Hulp \u0026amp; Documentatie\u003c\/h2\u003e\n\u003cp style=\"margin-bottom: 20px;\"\u003eHeb je vragen over het maken van mallen? Bekijk onze uitgebreide \u003ca style=\"color: #3498db; text-decoration: none; font-weight: bold;\" href=\"https:\/\/www.siliconesandmore.com\/pages\/informatiecentrum\" title=\"informatiecategorie\"\u003einformatiecategorie\u003c\/a\u003e of neem contact met ons op! We helpen je graag verder.\u003c\/p\u003e\n\u003cdiv style=\"display: flex; justify-content: center; gap: 20px; flex-wrap: wrap;\"\u003e\n\u003cspan style=\"color: #2c3e50;\"\u003e\u003cspan style=\"display: flex; align-items: center; gap: 10px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003e\u003cimg style=\"border-radius: 4px;\" height=\"50\" width=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/NL\/USP%20Class%20VI%20\u0026amp;%20ISO%2010993%20\u0026amp;%20food%20contact%20NL.pdf\" title=\"USP Class VI \u0026amp; ISO 10993 \u0026amp; food contact NL\"\u003e\u003cspan style=\"color: #2c3e50;\"\u003e\u003cspan style=\"display: flex; align-items: center; gap: 10px; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;\"\u003eUSP Class VI \u0026amp; ISO 10993\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003cdiv style=\"background: linear-gradient(135deg, #fff3cd 0%, #ffeaa7 100%); border: 2px solid #ffc107; border-radius: 12px; padding: 25px; margin-bottom: 20px;\"\u003e\n\u003ch3 style=\"color: #856404; margin: 0 0 15px 0; font-size: 1.3em; display: flex; align-items: center;\"\u003e\n\u003cspan style=\"margin-right: 10px; font-size: 1.2em;\"\u003e⚠️\u003c\/span\u003eBelangrijk: Onderhoud van Siliconen Mallen\u003c\/h3\u003e\n\u003cp style=\"color: #856404; margin-bottom: 15px;\"\u003eLet op: siliconen mallen kunnen vuil worden van vetten, oliën en andere producten. Dit kan niet voorkomen worden maar, kunt u vaak wel oplossen. Volg daarvoor deze handleiding:\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\u003ca style=\"display: inline-flex; align-items: center; gap: 10px; text-decoration: none; color: #856404; font-weight: bold;\" rel=\"noreferrer\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/Handleiding\/Het%20gebruik%20van%20siliconen%20mallen%20in%20de%20keuken%20professioneel.pdf\" title=\"Het gebruik van siliconen mallen in de keuken professioneel\"\u003e\u003cimg style=\"border-radius: 4px;\" height=\"50\" width=\"50\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\"\u003eProfessionele Keuken Handleiding\u003c\/a\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","products":[{"product_id":"elastosil-m-4641","title":"Wacker Elastosil M 4641® A\/B – Transparent Addition Silicone Rubber for Prototyping \u0026 Vacuum Casting","description":"\u003ch2\u003ePremium Transparent Addition-Curing Silicone Rubber for Professional Prototyping and Vacuum Casting Applications\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWacker Elastosil M 4641 A\/B\u003c\/strong\u003e is a pourable, addition-curing (platinum-cure) two-component RTV-2 silicone rubber that vulcanizes shrink-free at room temperature and can be considerably accelerated by applying heat. The highly transparent, translucent vulcanizate has a Shore A hardness of approximately 43, a mixing ratio of 10:1 by weight, a pot life of 90 minutes and a curing time of 12 hours at 23 °C. Thanks to its outstanding resistance to polyurethane and epoxy resins and its oil-free, dry surfaces, this product is ideally suited for vacuum casting and rapid prototyping, especially when crystal-clear casting resins are used.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eShore A 43:\u003c\/strong\u003e \u0026rarr; medium-hard flexibility combining dimensional stability with easy demolding of models with undercuts.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePot life 90 minutes:\u003c\/strong\u003e \u0026rarr; ample working time for deairing and casting larger or complex molds.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShrinkage \u0026lt; 0.1 %:\u003c\/strong\u003e \u0026rarr; accurate, dimensionally stable reproductions without chemical shrinkage during curing.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTensile strength \u0026gt; 4.5 N\/mm\u0026sup2; and tear strength \u0026gt; 25 N\/mm:\u003c\/strong\u003e \u0026rarr; high mechanical strength for long service life and many reproductions per mold.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eResistance to polyurethane and epoxy:\u003c\/strong\u003e \u0026rarr; suitable for repeated casting of aggressive resins without degradation of the mold surface.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eFood-safe (FDA and BfR compliant):\u003c\/strong\u003e \u0026rarr; suitable for the manufacture of food contact materials when processed correctly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum casting for rapid prototyping with polyurethane and epoxy resins.\u003c\/li\u003e\n\u003cli\u003eCrystal-clear casting resins requiring an oil-free mold surface.\u003c\/li\u003e\n\u003cli\u003eReproduction of models with undercuts and fine details.\u003c\/li\u003e\n\u003cli\u003eFood-safe molds for culinary applications.\u003c\/li\u003e\n\u003cli\u003ePrototype molds in product development and industrial design.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStir the A and B components separately and thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eMix by weight in a ratio of 10 parts A to 1 part B. Note: only use A and B components with the same batch number.\u003c\/li\u003e\n\u003cli\u003eStir slowly and without introducing air, preferably in a figure-8 motion, until a homogeneous mixture is obtained.\u003c\/li\u003e\n\u003cli\u003ePreferably deair the mixture under vacuum to remove air bubbles.\u003c\/li\u003e\n\u003cli\u003eCast within the pot life of 90 minutes.\u003c\/li\u003e\n\u003cli\u003eAllow to cure for 12 hours at 23 °C. Curing can be accelerated by heating; after demolding, optionally post-cure the mold for 2 to 3 hours at 100 °C to fully degas it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv style=\"background:#fff3cd;border:2px solid #ffc107;color:#856404;padding:15px;border-radius:8px;margin:20px 0;\"\u003e\n\u003cp style=\"margin:0;\"\u003e\u0026#9888;\u0026#65039; \u003cstrong\u003eNote \u0026ndash; inhibition with addition-curing silicones:\u003c\/strong\u003e This is a platinum-cure addition silicone. Curing can be inhibited by sulfur, nitrogen, amino compounds and metal salts. These substances occur, among others, in many latex gloves, some plasticines, paints, adhesives, condensation silicones, one-component silicone sealants, natural rubbers and 3D printing material (especially stereolithography). If you are unsure whether your materials (including gloves, spatulas and cups) contain these substances, first carry out a small test. If you still wish to mold an inhibited surface, first apply a protective layer of polyvinyl alcohol.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cem\u003eThis product is intended for the business market. For larger quantities or custom products, please contact us at info@nedform.com or +31 (0)46-3030989.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWacker Chemie AG is the world market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eDo you have questions about processing the Elastosil M 4641 A\/B, its suitability for your casting resins or preventing inhibition? Our specialists are happy to assist you. Contact us for personal advice.\u003c\/p\u003e\n","brand":"Wacker","offers":[{"title":"22 kg. Set (20 A + 2 B)","offer_id":49489535172949,"sku":"S11227","price":634.95,"currency_code":"EUR","in_stock":true},{"title":"220 kg. Set (200 A + 20 B)","offer_id":49489535271253,"sku":"A10170","price":6598.0,"currency_code":"EUR","in_stock":true},{"title":"5,5 kg. Set ( 5 A + 0,5 B)","offer_id":51884444582229,"sku":"S82080","price":169.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4641-ab-transparant-additie-siliconenrub-48037913395541.jpg?v=1780315478"},{"product_id":"elastosil-wacker-m4601","title":"Wacker ELASTOSIL® M 4601 A\/B – Pourable Addition Silicone for Molds \u0026 Reproduction","description":"\u003ch2\u003ePremium Pourable Addition-Cure Silicone for Professional Mold Making and Reproduction Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® M 4601 A\/B\u003c\/strong\u003e is a pourable, addition-curing two-component silicone rubber that cures at room temperature, featuring a Shore A hardness of 28, a reddish-brown final product, and exceptional resistance to common casting resins. With a pot life of 90 minutes and a curing time of 24 hours at 23°C, this product offers the process reliability professional mold makers require. The mixing ratio is 9:1 (A:B) by weight, with the platinum catalyst located in component B — important: use only components with the same batch number. ELASTOSIL® M 4601 A\/B is ideally suited for applications where shrink-free reproduction, high tear strength, and durable molds are essential.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTear Strength \u0026gt;30 N\/mm:\u003c\/strong\u003e exceptionally high resistance to tearing – molds with deep undercuts can be used multiple times without damage during demolding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElongation at Break 700%:\u003c\/strong\u003e maximum elasticity – complex geometries and fine details demold without deformation or residual stress in the mold.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLinear Shrinkage \u0026lt;0.1%:\u003c\/strong\u003e addition-curing without chemical shrinkage – dimensionally stable copies with micrometer-level reproduction accuracy.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot Life 90 minutes at 23°C:\u003c\/strong\u003e ample processing time – ideal for large molds and vacuum degassing beforehand without time pressure.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA and BfR compliant for food contact:\u003c\/strong\u003e meets European (EC 1935\/2004, BfR XV) and American (FDA 21 CFR §177.2600) food contact standards – suitable for culinary molds and chocolate molds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExcellent resistance to polyurethane:\u003c\/strong\u003e no adhesion issues or degradation with repeated use with PU, epoxy, and gypsum casting resins – no release agent required for well-sealed molds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProduction of precise casting molds for polyurethane, epoxy, and gypsum in art foundries and design studios\u003c\/li\u003e\n  \u003cli\u003eReproduction of sculptures, reliefs, and architectural ornaments in museum and restoration contexts\u003c\/li\u003e\n  \u003cli\u003eManufacturing of food contact molds for chocolate, sugar, and acoustic silicone products\u003c\/li\u003e\n  \u003cli\u003ePrototyping and series production in the automotive sector where dimensional accuracy is critical\u003c\/li\u003e\n  \u003cli\u003eComposite molding for fiber-reinforced materials with complex undercuts\u003c\/li\u003e\n  \u003cli\u003eArtificial stone and decorative concrete casting where repeated molds are required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003eStir component A (white, viscosity 15,000 mPa·s) thoroughly before use. Component B (reddish-brown, 800 mPa·s) should also be mixed well.\u003c\/li\u003e\n  \u003cli\u003eWeigh the components accurately in a ratio of 9 parts A to 1 part B (by weight). Use only components with the same batch number — mixing different batches can lead to curing problems.\u003c\/li\u003e\n  \u003cli\u003eMix slowly and carefully in a figure-8 motion or with a slow-speed mixer to minimize air entrapment. Mix until a completely homogeneous, streak-free mass.\u003c\/li\u003e\n  \u003cli\u003eOptionally degas the mixture in a vacuum chamber for 5–10 minutes to remove residual air bubbles. This is recommended for fine reproduction details.\u003c\/li\u003e\n  \u003cli\u003ePour the mixture slowly and from a single point into the mold within the 90-minute pot life to prevent air entrapment.\u003c\/li\u003e\n  \u003cli\u003eAllow the silicone to cure for 24 hours at 23°C. Curing can be accelerated by applying heat. After full curing, the mold is ready for use.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eManufactured by \u003cstrong\u003eWacker Chemie AG\u003c\/strong\u003e, global market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Warning: Inhibition with Addition-Cure Silicones\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-cure silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the materials you are using (gloves, spatulas, molds) contain these substances, perform a small test first. Inhibiting substances are found in latex gloves, some plasticines, condensation-cure silicones, 1-component silicone sealants, and certain 3D printing materials. If in doubt, apply a layer of polyvinyl alcohol (PVA) as a release layer.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\n\u003cp\u003eELASTOSIL® M 4601 A\/B is a proven choice for professional mold makers who require precisely reproducible results for high volumes and complex geometries. Contact us for technical datasheets, processing manuals, or product advice.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1 Kg Set","offer_id":49489537958229,"sku":"S10032","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5 Kg Set","offer_id":49489537990997,"sku":"S10356","price":199.0,"currency_code":"EUR","in_stock":true},{"title":"25 Kg Set","offer_id":49489538023765,"sku":"S11327","price":932.0,"currency_code":"EUR","in_stock":true},{"title":"Quotation for outside BeNeLux and Germany","offer_id":49489538056533,"sku":"S11347","price":8223.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4600-ab-fda-goedgekeurd-platinum-silicone-52722852364629.jpg?v=1773846332"},{"product_id":"wacker-elastosil-vario-15-catalyst-vario","title":"Wacker Elastosil Vario 15 Normal – Translucent Platinum Silicone for Molds \u0026 Prototyping","description":"\u003ch2\u003ePremium Translucent Silicone for Professional Molds\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eWacker Elastosil Vario 15 Normal\u003c\/strong\u003e is a two-component, platinum-cure (addition-crosslinking) casting silicone with translucent, colorless properties and a Shore A 15 softness rating. This high-performance silicone combines very low viscosity (5,000 mPa s) with minimal shrinkage and excellent mechanical properties, specifically developed for dimensionally accurate copies and reproduction molds. The Normal version (Harder VARIO) offers a processing time of 150 minutes, ideal for larger projects. Food-safe according to BfR and FDA guidelines.\u003c\/p\u003e\n\u003ch3\u003e Key Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTranslucent and colorless:\u003c\/strong\u003e Molded objects remain visible for accurate positioning and precision cutting of reproduction molds\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eVery low viscosity:\u003c\/strong\u003e 3,000 mPa s after mixing for excellent flow around components and self-venting properties\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eFlexible processing time:\u003c\/strong\u003e 150 minutes pot life with Härter VARIO (Normal) or 2 minutes with Härter VARIO F (Fast)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eShore A 15 softness:\u003c\/strong\u003e Very flexible and soft for easy demolding and delicate details\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExcellent mechanical properties:\u003c\/strong\u003e 6,5 N\/mm² tensile strength, 900% elongation, weiterreißwiderstand 15 ASTM D 624 B\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSchrumpffreie vulcanization:\u003c\/strong\u003e No chemical shrinkage for dimensionally accurate reproduction\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eModular system:\u003c\/strong\u003e Can be mixed with Elastosil Vario 40 for any desired hardness between 15-40 Shore A\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eFood safe \u0026amp; BfR\/FDA compliant:\u003c\/strong\u003e Suitable for food contact and culinary applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Typical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Prototypenherstellung and rapid prototyping for dimensionally accurate copies\u003c\/li\u003e\n\n\u003cli\u003e Reproduction molds for cast resin, concrete, plaster and all common reproduction materials\u003c\/li\u003e\n\n\u003cli\u003e Food-safe molds for chocolate, sugar, fondant, and culinary creations\u003c\/li\u003e\n\n\u003cli\u003e SFX and prosthetics: skin-friendly molds for masks, facial applications and special effects\u003c\/li\u003e\n\n\u003cli\u003e Podiatry and medical simulation for anatomical models and training phantoms\u003c\/li\u003e\n\n\u003cli\u003e Molds for polyurethane, epoxy, polyester and acrylic resins (Jesmonite, A1)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Technical Features\u003c\/h3\u003e\n\u003cp\u003e Elastosil Vario 15 Normal is supplied as a two-component system with a mixing ratio of 10:1 (base:hardener by weight). The Normal B component (Hardener VARIO) has a pot life of 150 minutes at 23°C and is deformable (demoldable) after 6 hours at room temperature. For faster projects, Harder VARIO F can be used (2-minute pot life, 15 minutes deformable) or a mix of both hardeners for intermediate curing times. Hardness can be adjusted by mixing Vario 15 (Shore A 15) and Vario 40 (Shore A 40) base components—for example, a 50\/50 mix gives approximately Shore A 27.5. Full vulcanization: 24 hours at 23°C. Curing can be accelerated by reheating. Density: 1.06 g\/cm³. Coloring can be done with 1-4% Elastosil Farbpaste FL. Note: The total hardening component must always be 10% of the base component by weight.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for professional molding, prototyping, and industrial applications, with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003e Important Warning: Inhibition with Additive Silicones\u003c\/h3\u003e\n\u003cp\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e This is an addition silicone (addition cross-linking\/platinum cure). These silicones can be poisoned by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you use (including gloves, spatulas, and cups) contain these ingredients, perform a small test first. These substances are found in many latex gloves, some plastilines, paints and adhesives, condensation silicones, one-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography). If you do want to use it, you will need to apply a protective layer of polyvinyl alcohol (PVA).\u003c\/p\u003e\n\u003ch3\u003e Professional Support\u003c\/h3\u003e\n\u003cp\u003e Our technical specialists advise on material selection, processing techniques, hardener selection, hardness adjustments, and optimal results for your specific reproduction molding application. Contact us for technical data sheets, processing guidelines, or advice on inhibition prevention with addition silicones.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"0:55 Kg Set","offer_id":49489539826005,"sku":"S10722","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"1.1 Kg Set","offer_id":49489539858773,"sku":"S10098","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5.5 Kg Set","offer_id":49489539891541,"sku":"S11353","price":174.95,"currency_code":"EUR","in_stock":true},{"title":"22 Kg Set","offer_id":49489539924309,"sku":"S10995","price":619.95,"currency_code":"EUR","in_stock":true},{"title":"220 Kg. Kit","offer_id":49489539957077,"sku":"S11357","price":5999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-vario-15-normaal-translucente-platinum-sil-49320249852245.png?v=1777972001"},{"product_id":"wacker-elastosil-vario-40-catalyst-vario-normaal","title":"Wacker ELASTOSIL® VARIO 40 Normal – Transparent Platinum Silicone for Molds \u0026 Prototyping","description":"\u003ch2\u003ePremium Transparent Platinum Silicone for Professional Mold and Prototyping Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® VARIO 40 Normal\u003c\/strong\u003e is a 2-component, addition-curing (platinum-cure) pourable silicone with Shore A 40 hardness and fully transparent color, specially developed for molds where visibility of the cast object is essential. The \u003cem\u003eNormal\u003c\/em\u003e variant offers a pot life of 60 minutes and a demolding time of 6 hours at 20°C – ideal for careful processing of complex molds without time pressure. This professional silicone combines excellent flowability (10,000 mPa·s), high tensile strength (8 N\/mm²), food safety, and skin-friendliness with unique adaptability via the VARIO system. Mixing ratio 10:1 (A:B).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully transparent:\u003c\/strong\u003e The cast object remains visible in the mold for precise and correctly positioned cutting – ideal for prototyping and complex geometries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 minutes pot life (Normal):\u003c\/strong\u003e Ample processing time for careful pouring, degassing, and positioning of complex molds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable hardness via VARIO system:\u003c\/strong\u003e Mix VARIO 15 and VARIO 40 A-components for any desired Shore A hardness between 15 and 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable curing speed:\u003c\/strong\u003e Combine Normal and Fast B-component for any desired curing time – total B always 10% of A-weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood and skin-friendly:\u003c\/strong\u003e Platinum-cure technology without by-products, suitable for culinary molds, podiatry, and skin contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical strength:\u003c\/strong\u003e 8 N\/mm² tensile strength and 15 N\/mm tear strength for durable, long-lasting molds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrototyping and rapid tooling: transparent molds for precise cutting of complex models\u003c\/li\u003e\n\u003cli\u003eCulinary molds for chocolate, confectionery, and food-safe applications (FDA compliant)\u003c\/li\u003e\n\u003cli\u003eStamps and pad printing industry: high detail reproduction and chemical resistance\u003c\/li\u003e\n\u003cli\u003ePodiatry and medical simulation: skin-friendly molds and anatomical models\u003c\/li\u003e\n\u003cli\u003eMolds for polyurethane, polyester, epoxy, and acrylic resin\u003c\/li\u003e\n\u003cli\u003eRobotics, animatronics, and erotic industry: flexible, skin-friendly silicone objects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix A and B components in a 10:1 ratio by weight\u003c\/li\u003e\n\u003cli\u003eMix slowly in a figure-8 motion to minimize air entrapment\u003c\/li\u003e\n\u003cli\u003eOptional: vacuum immediately after mixing to remove air bubbles\u003c\/li\u003e\n\u003cli\u003ePour within 60 minutes pot life\u003c\/li\u003e\n\u003cli\u003eAllow 6 hours to cure at 20°C (or accelerated in an oven)\u003c\/li\u003e\n\u003cli\u003eRecommended: post-bake at 100°C for 2-3 hours for complete outgassing\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"silicone-mengcalculator\" style=\"max-width: 100%; margin: 30px 0; padding: 20px; background: #f8f9fa; border: 3px solid #0a4a8a; border-radius: 12px; box-shadow: 0 4px 15px rgba(10,74,138,0.12); font-family: inherit;\"\u003e\n\u003cdiv style=\"display: flex; align-items: center; gap: 12px; margin-bottom: 16px; flex-wrap: wrap;\"\u003e\n\u003cdiv style=\"background: #0a4a8a; color: white; padding: 8px 16px; border-radius: 9999px; font-weight: bold; font-size: 1.05rem; white-space: nowrap;\"\u003e🧪 EL ASTOSIL VARIO MIX\u003c\/div\u003e\n\u003ch2 style=\"margin: 0; font-size: 1.55rem; color: #0a4a8a; flex: 1;\"\u003eMixing Calculator for Your Perfect Silicone\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #333; line-height: 1.4; margin-bottom: 20px; max-width: 680px; font-size: 0.98rem;\"\u003eCalculate exactly how much \u003cstrong\u003eElastosil Vario 15\u003c\/strong\u003e, \u003cstrong\u003eVario 40\u003c\/strong\u003e, \u003cstrong\u003eCatalyst Vario F (fast)\u003c\/strong\u003e and \u003cstrong\u003eNormal\u003c\/strong\u003e you need.\u003cbr\u003e\u003csmall style=\"color: #e74c3c;\"\u003eAll values at 20 °C. Temperature has a big influence!\u003c\/small\u003e\u003c\/p\u003e\n\u003c!-- Hoofd-layout: 2 kolommen --\u003e\n\u003cdiv style=\"display: flex; gap: 20px; align-items: flex-start;\"\u003e\n\u003c!-- Kolom 1: 3 inputcellen onder elkaar --\u003e\n\u003cdiv style=\"flex: 1; display: flex; flex-direction: column; gap: 12px;\"\u003e\n\u003c!-- CEL 1: Hardheid --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e1. Desired hardness (Shore A)\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n\u003cinput type=\"number\" id=\"shoreInput\" value=\"40\" min=\"15\" max=\"40\" step=\"0.1\" style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eShore A\u003c\/span\u003e\n\u003c\/div\u003e\n\u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003e15 = very soft • 40 = firm\u003c\/small\u003e\n\u003c\/div\u003e\n\u003c!-- CEL 2: Verwerkingstijd (potlife) --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e2. Desired pot life\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n\u003cinput type=\"number\" id=\"potlifeInput\" value=\"150\" min=\"3\" max=\"150\" step=\"1\" style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eminutes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- CEL 3: Alleen totale gewenste mengwaarde (A + B) – uithardtijd-output verwijderd --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e3. Total desired mix amount (A + B in grams)\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\u003cinput type=\"number\" id=\"totalMix\" value=\"1100\" min=\"110\" step=\"50\" style=\"width: 220px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e\u003c\/div\u003e\n\u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003eB-component = always 10% of A-component\u003c\/small\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Kolom 2: Jouw perfecte menging (rechts) --\u003e\n\u003cdiv id=\"finalResult\" style=\"flex: 1; padding: 20px; background: #0a4a8a; color: white; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.1); min-height: 100%; display: none;\"\u003e\n\u003ch3 style=\"color: white; margin: 0 0 14px 0; font-size: 1.5 rem;\"\u003e✅ Your perfect mix\u003c\/h3\u003e\n\u003cdiv id=\"finalContent\" style=\"display: flex; flex-direction: column; gap: 14px; font-size: 1.3rem;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- DISCLAIMER --\u003e\n\u003cdiv style=\"margin-top: 24px; padding: 14px 20px; background: #fff3cd; border: 1px solid #ffeaa7; border-radius: 8px; color: #856404; font-size: 1.1rem; line-height: 1.45; text-align: center;\"\u003e\n\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e This calculator is merely a tool and provides an estimate based on the graph from the manual. Actual pot life and curing time may vary due to temperature, mixing technique, humidity, or other factors. Siliconesandmore accepts no liability for divergent results. Always perform a small test mix first and consult the official manual.\u003c\/div\u003e\n\u003cdiv style=\"margin-top: 18px; text-align: center; font-size: 0.9rem; color: #555;\"\u003eTip: Buy the kits separately if you want to adjust both hardness and speed.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\n  \/\/ ====================== DATA UIT GRAFIEK (Wacker TDS + jouw screenshot) ======================\n  \/\/ Waarden gecontroleerd aan de hand van de bijgevoegde grafiek:\n  \/\/ Potlife (blauwe lijn): 155 → 60 → 38 → 18 → 8 min\n  \/\/ Curing time (rode lijn): 6.0 → 3.0 → 1.8 → 1.0 → 0.25 uur\n  \/\/ 100% F = 15 min uitharding (0.25 uur) zoals in de grafiek. (Jouw eerdere opmerking over 3 min is niet terug te vinden in de grafiek; we houden ons aan de officiële Wacker-grafiek.)\n  const bMixData = [\n    { p: 0,   pot: 155, dem: 6.0 },\n    { p: 30,  pot:  60, dem: 3.0 },\n    { p: 50,  pot:  38, dem: 1.8 },\n    { p: 70,  pot:  18, dem: 1.0 },\n    { p: 100, pot:   8, dem: 0.25 }\n  ];\n\n  function getPercentFromTime(target, key) {\n    const data = bMixData;\n    if (target \u003e= data[0][key]) return 0;\n    if (target \u003c= data[data.length-1][key]) return 100;\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (target \u003c= data[i][key] \u0026\u0026 target \u003e= data[i+1][key]) {\n        const frac = (data[i][key] - target) \/ (data[i][key] - data[i+1][key]);\n        return data[i].p + frac * (data[i+1].p - data[i].p);\n      }\n    }\n    return 50;\n  }\n\n  function getTimeFromPercent(percent, key) {\n    const data = bMixData;\n    const p = Math.max(0, Math.min(100, percent));\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (p \u003e= data[i].p \u0026\u0026 p \u003c= data[i+1].p) {\n        const frac = (p - data[i].p) \/ (data[i+1].p - data[i].p);\n        return data[i][key] + frac * (data[i+1][key] - data[i][key]);\n      }\n    }\n    return p \u003c= 0 ? data[0][key] : data[data.length-1][key];\n  }\n\n  function updateCalculator() {\n    const totalMix = parseFloat(document.getElementById('totalMix').value) || 1100;\n    const totalA = Math.round(totalMix \/ 1.1);\n    const totalB = Math.round(totalMix - totalA);\n\n    const shore = parseFloat(document.getElementById('shoreInput').value) || 15;\n\n    const frac40 = (shore - 15) \/ 25;\n    const a15 = Math.round((1 - frac40) * totalA);\n    const a40 = Math.round(frac40 * totalA);\n\n    const potTarget = parseFloat(document.getElementById('potlifeInput').value) || 15;\n    const percentFast = getPercentFromTime(potTarget, 'pot');\n    const calculatedDem = getTimeFromPercent(percentFast, 'dem');\n\n    const bFast = Math.round((percentFast \/ 100) * totalB);\n    const bNormal = totalB - bFast;\n\n    const finalHTML = `\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eA-component (total ${totalA} g)\u003c\/strong\u003e\u003cbr\u003e\n        Vario 15: \u003cstrong\u003e${a15} g\u003c\/strong\u003e\u003cbr\u003e\n        Vario 40: \u003cstrong\u003e${a40} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eB-component (total ${totalB} g)\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Vario F: \u003cstrong\u003e${bFast} g\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Normal: \u003cstrong\u003e${bNormal} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eWorking times\u003c\/strong\u003e\u003cbr\u003e\n        Pot life: \u003cstrong\u003e${potTarget.toFixed(0)} min\u003c\/strong\u003e\u003cbr\u003e\n        Demold time: \u003cstrong\u003e${calculatedDem.toFixed(2)} hours\u003c\/strong\u003e\n      \u003c\/div\u003e\n    `;\n    document.getElementById('finalContent').innerHTML = finalHTML;\n    document.getElementById('finalResult').style.display = 'block';\n  }\n\n  function copyMix() {\n    const final = document.getElementById('finalContent').innerText;\n    navigator.clipboard.writeText(final).then(() =\u003e {\n      const btn = document.querySelector('#finalResult button');\n      if (btn) {\n        const orig = btn.innerHTML;\n        btn.innerHTML = '✅ Copied!';\n        setTimeout(() =\u003e { btn.innerHTML = orig; }, 2000);\n      }\n    });\n  }\n\n  function initCalculator() {\n    const elements = ['shoreInput', 'potlifeInput', 'totalMix'];\n    elements.forEach(id =\u003e {\n      const el = document.getElementById(id);\n      if (el) {\n        el.addEventListener('input', updateCalculator);\n        el.addEventListener('change', updateCalculator);\n      }\n    });\n    updateCalculator();\n  }\n\n  if (document.readyState === 'loading') {\n    document.addEventListener('DOMContentLoaded', initCalculator);\n  } else {\n    initCalculator();\n  }\n\u003c\/script\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for professional mold making, prototyping, and food-safe applications with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003eImportant Warning: Inhibition in Addition-Curing Silicones\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-curing (platinum-cure) silicone. These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you are using (including gloves, spatulas, and cups) contain these ingredients, please perform a small test first. These substances can be found in many latex gloves, some plastilines, paints and glues, condensation-curing silicones, 1-component silicone sealants, natural rubbers, and 3D printing material (especially stereolithography). If you wish to use these, you will need to apply a protective layer of polyvinyl alcohol (PVA).\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on hardness mixing, curing speed, vacuum techniques, and optimal results for your specific mold, prototype, or stamp application. Contact us for technical datasheets, processing instructions, or advice on the VARIO system.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"0:55 Kg Set","offer_id":49489540317525,"sku":"S11310","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"1.1 Kg Set","offer_id":49489540350293,"sku":"S11307","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5.5 Kg Set","offer_id":49489540383061,"sku":"S82013","price":174.95,"currency_code":"EUR","in_stock":true},{"title":"22 Kg Set","offer_id":49489540415829,"sku":"S11311","price":619.95,"currency_code":"EUR","in_stock":true},{"title":"220 Kg. Kit","offer_id":49489540448597,"sku":"S82014","price":5999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-vario-40-normaal-transparante-platinum-sil-49320249590101.png?v=1778659609"},{"product_id":"elastosil-vario-15-catalyst-vario-f","title":"Wacker Elastosil Vario 15 Fast – Fast Translucent Platinum Silicone for Prototyping \u0026 Molds","description":"\u003ch2\u003ePremium Fast Translucent Silicone for Professional Prototyping\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Elastosil Vario 15 Fast\u003c\/strong\u003e is a 2-component, platinum-cure (addition-curing) casting silicone with exceptional softness (Shore A 15) and very fast curing (15 minutes demoldable). This high-quality translucent silicone combines very low viscosity (5,000 mPa·s) with minimal shrinkage (\u003c0.1%) and excellent mechanical properties, specifically developed for rapid prototyping where visual control is essential. Food-safe and skin-friendly according to FDA\/TÜV guidelines. Easy 10:1 mixing ratio.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery fast curing:\u003c\/strong\u003e 2 minutes pot life, 15 minutes demoldable at 20°C for rapid production and short lead times\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranslucent for visual control:\u003c\/strong\u003e Cast objects remain visible for precise positioning and precision cutting during prototyping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 15 softness:\u003c\/strong\u003e Very flexible and soft for easy demolding and delicate details\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum-cure technology:\u003c\/strong\u003e Minimal shrinkage (\u003c0.1%), no inhibition with most substrates, food-safe and skin-friendly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery fluid and self-deaerating:\u003c\/strong\u003e 5,000 mPa·s viscosity for perfect detail reproduction without vacuum treatment\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable properties:\u003c\/strong\u003e Hardness and speed adjustable by mixing with Vario 40 and\/or Normal catalyst - see mixing charts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRapid prototyping where visual control during mold cutting is essential\u003c\/li\u003e\n\u003cli\u003eFood-safe molds for chocolate, confectionery, fondant, and culinary creations (after post-curing)\u003c\/li\u003e\n\u003cli\u003eSFX and prosthetics: skin-friendly molds for masks, facial applications, and special effects\u003c\/li\u003e\n\u003cli\u003ePodiatry applications and medical models where softness and speed are required\u003c\/li\u003e\n\u003cli\u003ePad printing pads and flexible printing applications in the graphic industry\u003c\/li\u003e\n\u003cli\u003eMolds for polyurethane, epoxy, polyester, and acrylic resins where transparency is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCarefully mix component A and B in a 10:1 ratio (by weight) manually or mechanically\u003c\/li\u003e\n\u003cli\u003eStir slowly in a figure-8 motion to prevent air entrapment\u003c\/li\u003e\n\u003cli\u003eProcess the mixture within the 2-minute pot life\u003c\/li\u003e\n\u003cli\u003eWait to demold until fully cured (15 minutes at 20°C)\u003c\/li\u003e\n\u003cli\u003eFor food-safe applications: post-cure for 2-3 hours at 100-140°C to fully outgas\u003c\/li\u003e\n\u003cli\u003eCuring can be accelerated by heating - note: air bubbles have less time to escape\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"max-width: 100%; margin: 30px 0; padding: 20px; background: #f8f9fa; border: 3px solid #0a4a8a; border-radius: 12px; box-shadow: 0 4px 15px rgba(10,74,138,0.12); font-family: inherit;\" class=\"silicone-mengcalculator\"\u003e\n  \u003cdiv style=\"display: flex; align-items: center; gap: 12px; margin-bottom: 16px; flex-wrap: wrap;\"\u003e\n    \u003cdiv style=\"background: #0a4a8a; color: white; padding: 8px 16px; border-radius: 9999px; font-weight: bold; font-size: 1.05rem; white-space: nowrap;\"\u003e🧪 EL ASTOSIL VARIO MIX\u003c\/div\u003e\n    \u003ch2 style=\"margin: 0; font-size: 1.55rem; color: #0a4a8a; flex: 1;\"\u003eMixing Calculator for Your Perfect Silicone\u003c\/h2\u003e\n  \u003c\/div\u003e\n  \u003cp style=\"color: #333; line-height: 1.4; margin-bottom: 20px; max-width: 680px; font-size: 0.98rem;\"\u003eCalculate exactly how much \u003cstrong\u003eElastosil Vario 15\u003c\/strong\u003e, \u003cstrong\u003eVario 40\u003c\/strong\u003e, \u003cstrong\u003eCatalyst Vario F (fast)\u003c\/strong\u003e and \u003cstrong\u003eNormal\u003c\/strong\u003e you need.\u003cbr\u003e\u003csmall style=\"color: #e74c3c;\"\u003eAll values at 20 °C. Temperature has a big influence!\u003c\/small\u003e\u003c\/p\u003e\n\n  \u003c!-- Main layout: 2 columns --\u003e\n  \u003cdiv style=\"display: flex; gap: 20px; align-items: flex-start;\"\u003e\n    \u003c!-- Column 1: 3 input cells stacked --\u003e\n    \u003cdiv style=\"flex: 1; display: flex; flex-direction: column; gap: 12px;\"\u003e\n\n      \u003c!-- CELL 1: Hardness --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e1. Desired hardness (Shore A)\u003c\/h3\u003e\n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"0.1\" max=\"40\" min=\"15\" value=\"15\" id=\"shoreInput\" type=\"number\"\u003e \n          \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eShore A\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003e15 = very soft • 40 = firm\u003c\/small\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CELL 2: Pot life --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e2. Desired processing time (pot life)\u003c\/h3\u003e\n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"1\" max=\"150\" min=\"3\" value=\"3\" id=\"potlifeInput\" type=\"number\"\u003e \n          \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eminutes\u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CELL 3: Only total desired mix value (A + B) – curing time output removed --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e3. Total desired mix value (A + B in grams)\u003c\/h3\u003e\n        \n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 220px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"50\" min=\"110\" value=\"1100\" id=\"totalMix\" type=\"number\"\u003e\n        \u003c\/div\u003e\n        \u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003eB-component = always 10% of A-component\u003c\/small\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n\n    \u003c!-- Column 2: Your perfect mix (right) --\u003e\n    \u003cdiv style=\"flex: 1; padding: 20px; background: #0a4a8a; color: white; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.1); min-height: 100%; display: none;\" id=\"finalResult\"\u003e\n      \u003ch3 style=\"color: white; margin: 0 0 14px 0; font-size: 1.5 rem;\"\u003e✅ Your perfect mix\u003c\/h3\u003e\n      \u003cdiv style=\"display: flex; flex-direction: column; gap: 14px; font-size:1.3rem;\" id=\"finalContent\"\u003e\u003c\/div\u003e\n      \n\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- DISCLAIMER --\u003e\n  \u003cdiv style=\"margin-top: 24px; padding: 14px 20px; background: #fff3cd; border: 1px solid #ffeaa7; border-radius: 8px; color: #856404; font-size: 1.1rem; line-height: 1.45; text-align: center;\"\u003e\n    \u003cstrong\u003eDisclaimer:\u003c\/strong\u003e This calculator is merely a tool and provides an estimate based on the graph from the manual. Actual processing time and curing time may vary due to temperature, mixing technique, humidity, or other factors. Siliconesandmore accepts no liability for differing results. Always perform a small test mix first and consult the official manual.\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"margin-top: 18px; text-align: center; font-size: 0.9rem; color: #555;\"\u003eTip: Purchase the kits separately if you want to adjust both hardness and speed.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\n  \/\/ ====================== DATA FROM GRAPH (Wacker TDS + your screenshot) ======================\n  \/\/ Values checked against the attached graph:\n  \/\/ Potlife (blue line): 155 → 60 → 38 → 18 → 8 min\n  \/\/ Curing time (red line): 6.0 → 3.0 → 1.8 → 1.0 → 0.25 hours\n  \/\/ 100% F = 15 min curing (0.25 hours) as in the graph. (Your earlier note about 3 min is not found in the graph; we adhere to the official Wacker graph.)\n  const bMixData = [\n    { p: 0,   pot: 155, dem: 6.0 },\n    { p: 30,  pot:  60, dem: 3.0 },\n    { p: 50,  pot:  38, dem: 1.8 },\n    { p: 70,  pot:  18, dem: 1.0 },\n    { p: 100, pot:   8, dem: 0.25 }\n  ];\n\n  function getPercentFromTime(target, key) {\n    const data = bMixData;\n    if (target \u003e= data[0][key]) return 0;\n    if (target \u003c= data[data.length-1][key]) return 100;\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (target \u003c= data[i][key] \u0026\u0026 target \u003e= data[i+1][key]) {\n        const frac = (data[i][key] - target) \/ (data[i][key] - data[i+1][key]);\n        return data[i].p + frac * (data[i+1].p - data[i].p);\n      }\n    }\n    return 50;\n  }\n\n  function getTimeFromPercent(percent, key) {\n    const data = bMixData;\n    const p = Math.max(0, Math.min(100, percent));\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (p \u003e= data[i].p \u0026\u0026 p \u003c= data[i+1].p) {\n        const frac = (p - data[i].p) \/ (data[i+1].p - data[i].p);\n        return data[i][key] + frac * (data[i+1][key] - data[i][key]);\n      }\n    }\n    return p \u003c= 0 ? data[0][key] : data[data.length-1][key];\n  }\n\n  function updateCalculator() {\n    const totalMix = parseFloat(document.getElementById('totalMix').value) || 1100;\n    const totalA = Math.round(totalMix \/ 1.1);\n    const totalB = Math.round(totalMix - totalA);\n\n    const shore = parseFloat(document.getElementById('shoreInput').value) || 15;\n\n    const frac40 = (shore - 15) \/ 25;\n    const a15 = Math.round((1 - frac40) * totalA);\n    const a40 = Math.round(frac40 * totalA);\n\n    const potTarget = parseFloat(document.getElementById('potlifeInput').value) || 15;\n    const percentFast = getPercentFromTime(potTarget, 'pot');\n    const calculatedDem = getTimeFromPercent(percentFast, 'dem');\n\n    const bFast = Math.round((percentFast \/ 100) * totalB);\n    const bNormal = totalB - bFast;\n\n    const finalHTML = `\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eA-component (total ${totalA} g)\u003c\/strong\u003e\u003cbr\u003e\n        Vario 15: \u003cstrong\u003e${a15} g\u003c\/strong\u003e\u003cbr\u003e\n        Vario 40: \u003cstrong\u003e${a40} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eB-component (total ${totalB} g)\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Vario F: \u003cstrong\u003e${bFast} g\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Normal: \u003cstrong\u003e${bNormal} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eWorking Times\u003c\/strong\u003e\u003cbr\u003e\n        Pot life: \u003cstrong\u003e${potTarget.toFixed(0)} min\u003c\/strong\u003e\u003cbr\u003e\n        Curing time: \u003cstrong\u003e${calculatedDem.toFixed(2)} hours\u003c\/strong\u003e\n      \u003c\/div\u003e\n    `;\n    document.getElementById('finalContent').innerHTML = finalHTML;\n    document.getElementById('finalResult').style.display = 'block';\n  }\n\n  function copyMix() {\n    const final = document.getElementById('finalContent').innerText;\n    navigator.clipboard.writeText(final).then(() =\u003e {\n      const btn = document.querySelector('#finalResult button');\n      if (btn) {\n        const orig = btn.innerHTML;\n        btn.innerHTML = '✅ Copied!';\n        setTimeout(() =\u003e { btn.innerHTML = orig; }, 2000);\n      }\n    });\n  }\n\n  function initCalculator() {\n    const elements = ['shoreInput', 'potlifeInput', 'totalMix'];\n    elements.forEach(id =\u003e {\n      const el = document.getElementById(id);\n      if (el) {\n        el.addEventListener('input', updateCalculator);\n        el.addEventListener('change', updateCalculator);\n      }\n    });\n    updateCalculator();\n  }\n\n  if (document.readyState === 'loading') {\n    document.addEventListener('DOMContentLoaded', initCalculator);\n  } else {\n    initCalculator();\n  }\n\u003c\/script\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjusting Hardness:\u003c\/strong\u003e Mix A-component of Vario 15 with Vario 40 for any desired hardness between Shore A 15-40 (e.g., 50\/50 mix = approx. Shore A 27.5)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjusting Speed:\u003c\/strong\u003e Mix Fast B-component (15 min) with Normal B-component (6 hours) for intermediate curing times - see graph in datasheet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlease note:\u003c\/strong\u003e Total B-component must always be 10% of the weight of the total A-component\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a world leader in silicone technologies for professional mold making, prototyping, and food-safe applications with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003eImportant Warning: Inhibition with Addition-Cure Silicones\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-cure silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you are using (including gloves, spatulas, and cups) contain these ingredients, first conduct a small test. These substances are found, among other things, in many latex gloves, some plasticines, paints and glues, condensation-cure silicones, 1-component silicone sealant, natural rubbers, and 3D printing material (especially stereolithography). If you wish to use these, you will need to apply a protective layer of polyvinyl alcohol (PVA).\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on material selection, hardness adjustments, speed adjustments, and optimal results for your specific rapid prototyping or mold application. Contact us for technical datasheets, processing guidelines, or advice on the Wacker Vario modular system.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"0:55 Kg Set","offer_id":49489540514133,"sku":"S10071","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"1.1 Kg Set","offer_id":49489540546901,"sku":"S10720","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5.5 Kg Set","offer_id":49489540579669,"sku":"S10721","price":174.95,"currency_code":"EUR","in_stock":true},{"title":"22 Kg Set","offer_id":49489540612437,"sku":"S10998","price":619.95,"currency_code":"EUR","in_stock":true},{"title":"220 Kg. Kit","offer_id":49489540645205,"sku":"S11356","price":5999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-vario-15-snel-snelle-translucente-platinum-49320249721173.png?v=1777907165"},{"product_id":"elastosil-m-4642","title":"Wacker Elastosil® M 4642 A\/B – Dark Red Addition Cured Silicone for Molds \u0026 Casting Resins","description":"\u003ch2\u003ePremium shrinkage-free addition-cure silicone for professional mold making and casting resin applications\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWacker Elastosil® M 4642 A\/B\u003c\/strong\u003e is a pourable, addition-curing (platinum cure) two-component silicone rubber (RTV-2) that cures shrinkage-free at room temperature. The silicone has a dark red final color, an average hardness of Shore A 37, and a mixed viscosity of approximately 15,000 mPa·s, allowing the material to flow well and accurately reproduce fine details. With a pot life of 90 minutes and a cure time of 12 hours at 23°C (can be accelerated with heat), a mixing ratio of 10:1 (A:B) by weight, and a linear shrinkage of less than 0.1%, this material is ideally suited for dimensionally accurate reproduction. Its exceptional resistance to common casting resins makes it the standard choice for molds of models with undercuts.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTear strength \u0026gt;30 N\/mm\u003c\/strong\u003e – withstands strong undercuts and repeated demolding without tearing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear shrinkage \u0026lt;0.1%\u003c\/strong\u003e – dimensionally accurate, true-to-size copies thanks to addition curing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength 7 N\/mm²\u003c\/strong\u003e – high mechanical load capacity for long-term mold use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElongation at break 480%\u003c\/strong\u003e – flexible enough to demold complex geometries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShore A 37\u003c\/strong\u003e – average hardness with sufficient inherent stiffness for dimensionally stable molds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed viscosity approx. 15,000 mPa·s\u003c\/strong\u003e – very good flow and detailed reproduction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMolds for casting polyurethane, polyester, and epoxy resins\u003c\/li\u003e\n\u003cli\u003ePrototyping and small series production via vacuum casting\u003c\/li\u003e\n\u003cli\u003eReproduction of models with strong undercuts requiring dimensional accuracy\u003c\/li\u003e\n\u003cli\u003eComposite molding and vacuum bagging for composite materials\u003c\/li\u003e\n\u003cli\u003eReproduction of art and museum objects with high detail fidelity\u003c\/li\u003e\n\u003cli\u003eMolds where inherent stiffness of the form is desired\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eStir component A and component B thoroughly and separately first. The platinum catalyst is in component B.\u003c\/li\u003e\n\u003cli\u003eEnsure that component A and B have the same lot number, then mix in a weight ratio of 10 parts A to 1 part B.\u003c\/li\u003e\n\u003cli\u003eMix slowly and carefully using a figure-8 motion to avoid introducing air; also scrape the walls and bottom of the mixing vessel.\u003c\/li\u003e\n\u003cli\u003ePreferably degas the mixture under vacuum to remove air bubbles.\u003c\/li\u003e\n\u003cli\u003ePour within the 90-minute pot life in a thin stream and from a low height into the mold.\u003c\/li\u003e\n\u003cli\u003eAllow to cure for 12 hours at 23°C. Curing can be accelerated with heat; note that air bubbles will then have less time to escape and the Shore hardness may be slightly higher.\u003c\/li\u003e\n\u003cli\u003eOptionally, after demolding, post-cure for 2 to 3 hours at 100°C to completely degas the mold.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003ePlease note: pot life and demolding time are highly temperature-dependent. At higher temperatures, both are shorter.\u003c\/p\u003e\u003ch3\u003eInhibition Warning\u003c\/h3\u003e\u003cp\u003eThis is an addition-curing (platinum cure) silicone. Curing can be inhibited (inhibition) by sulfur and sulfur compounds, amines and amine-containing substances, organotin and organometallic compounds, and certain plastics. These substances are found in many latex gloves, some plasticines, lacquers and glues, condensation silicones, 1-component silicone sealant, natural rubber, and 3D printing materials (especially stereolithography). If in doubt about gloves, spatulas, cups, or the model, always perform a small test first. If you still want to use an inhibitory surface, apply a release layer of polyvinyl alcohol.\u003c\/p\u003e\u003ch3\u003eShelf Life\u003c\/h3\u003e\u003cp\u003eStore the silicone in a sealed container between 5°C and 25°C. The shelf life is indicated on the packaging.\u003c\/p\u003e\u003ch3\u003eProfessional Support\u003c\/h3\u003e\u003cp\u003eWacker Chemie AG is a global market leader in the development and production of silicones for industrial and technical applications. Do you have questions about the right silicone choice for your mold-making or casting resin application? Contact Silicones and More; we are happy to assist you.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"Elastosil, 4642 Set1.1 kg. (1A + 0.1B)","offer_id":49531856224597,"sku":"S11408","price":58.5,"currency_code":"EUR","in_stock":true},{"title":"Elastosil, 4642 Set5.5 kg. (5A + 0.5B)","offer_id":49531856290133,"sku":"S11670","price":289.95,"currency_code":"EUR","in_stock":true},{"title":"Elastosil, 4642 Set 22 kg. (20A + 2B)","offer_id":49531856322901,"sku":"S11669","price":1107.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4642-ab-donkerrode-additie-silicone-voor-48098032353621.jpg?v=1780056286"},{"product_id":"dimethicone-pdms-1000-cst-siliconen-olie-voor-phar","title":"Dimethicone PDMS 1000 cSt, Silikonöl für Pharma","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003eDimethicone 1000 cSt\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an extra pure PDMS (silicone oil) suitable for pharma and cosmetics.\u003cbr\u003eSilicone oil is made from silicon. Nedform silicone oil can be used for countless purposes.\u003c\/p\u003e\n\u003cp\u003e✔ minimal change in physical properties over a wide temperature range\u003cbr\u003e✔ excellent water-repellent properties\u003cbr\u003e✔ good dielectric properties\u003cbr\u003e✔ low surface tension and therefore high surface activity chemically very non-reactive\u003cbr\u003e✔ low pour point\u003cbr\u003e✔ good solubility in a wide range of solvents\u003c\/p\u003e\n\u003cp\u003eThis very liquid silicone oil 1000 cSt. can be added to molding silicones so that they will become softer and more flexible. By adding the oil, the silicone will also become more fluid and more stretchable. The oil can also be used to smooth out iron-on silicone (in the case of an iron-on spatula mold) by hand.\u003c\/p\u003e\n\u003cp\u003eThis oil can be used in products that come into contact with food or drink according to FDA 21 CFR Par177.2600.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to add\u003c\/li\u003e\n\u003cli\u003eFor addition and condensation silicones\u003c\/li\u003e\n\u003cli\u003eColorless and odorless\u003c\/li\u003e\n\u003cli\u003eHarmless\u003c\/li\u003e\n\u003cli\u003emedium liquid \/ medium viscous (1000 cSt)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eViscosity: 350 cSt\u003c\/li\u003e\n\u003cli\u003eAuto-ignition temperature: about 410°C\u003c\/li\u003e\n\u003cli\u003eFlash point \u0026gt;120 °C in closed cup, \u0026gt; 300°C in open cup\u003c\/li\u003e\n\u003cli\u003eFreezing point: -50°C\u003c\/li\u003e\n\u003cli\u003eDensity at 25°C: 0.97 g\/cm³\u003c\/li\u003e\n\u003cli\u003eSurface tension: 21.3 mN\/m\u003c\/li\u003e\n\u003cli\u003eRefractive index at 25°C: 1.403\u003c\/li\u003e\n\u003cli\u003eThe molecular weight is ~28,000 g\/mol (high molecular).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eshelf life\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAt least 5 years.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/DE\/DE%20-%20Produktinformationen%20Silikonöl%2050%20cSt.pdf\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\"\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Nedform Silicone Oil.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Nedform Siliconen Olie.pdf\"\u003eEN - Product information Nedform Silicone Oil.pdf\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/DE\/DE%20-%20Produktinformationen%20Silikonöl%20350%20cSt.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\"\u003e\u003c\/strong\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Nedform Silicone Oils.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product information Nedform Silicone Oils.pdf\"\u003eEN - Product information Nedform Silicone Oils.pdf\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/DE\/DE%20-%20Produktinformationen%20Silikonöl%20350%20cSt.pdf\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\"\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"BRB Silicone Oils Food Grade.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/BRB Silicone Oils Food Grade.pdf\"\u003eBRB Silicone Oils Food Grade.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Atoro","offers":[{"title":"0.9 Kg DM 1000 cSt","offer_id":49531858846037,"sku":"S11556","price":25.93,"currency_code":"EUR","in_stock":true},{"title":"4.5 Kg DM 1000 cSt","offer_id":49531858878805,"sku":"S11557","price":102.03,"currency_code":"EUR","in_stock":true},{"title":"25 Kg DM 1000 cSt","offer_id":49531858911573,"sku":"S11558","price":519.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/atoro-dimethicone-pdms-1000-cst-siliconen-olie-voor-pharma-48098034057557.png?v=1758542700"},{"product_id":"elastosil-rt-602","title":"Wacker Elastosil RT 602","description":"\u003cp\u003ePourable, addition-cured, two-component silicone rubber that vulcanizes at room temperature.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eMain application:\u003c\/strong\u003e\u003cbr \/\u003e- Automotive electronics\u003cbr \/\u003e- Measuring and regulating, Sensor technology\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplication details\u003c\/strong\u003e\u003cbr \/\u003e- all-round potting compound\u003cbr \/\u003e- manufacture of cast articles\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCharacteristics\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio: 9:1 mixing ratio\u003c\/li\u003e\r\n\u003cli\u003eLow viscosity: 3,500 mPa.s, good fluidity\u003c\/li\u003e\r\n\u003cli\u003eAverage hardness: Shore A 30\u003c\/li\u003e\r\n\u003cli\u003eTwo-component platinum hardening.\u003c\/li\u003e\r\n\u003cli\u003eDensity: 1.17 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eVolume resistivity: 10 \u003csup\u003e15\u003c\/sup\u003e Ohm.cm\u003c\/li\u003e\r\n\u003cli\u003ePermitivity: 2.7\u003c\/li\u003e\r\n\u003cli\u003eColor: Light gray\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003ePlease note: Only components A and B with the same lot number may be processed together!\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAll surfaces must be clean and free of contaminants that could prevent the curing of ELASTOSIL® RT 602 A\/B. Examples of inhibitory contaminants include sulfur-containing materials, plasticizers, urethanes, amine-containing materials and organometallic compounds - especially organotin compounds. If it is not known whether a substrate inhibits cure, a small scale test should be performed to determine compatibility.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTo blend\u003c\/strong\u003e :\u003c\/p\u003e\r\n\u003cp\u003eComponent A of ELASTOSIL® RT 602 contains the platinum catalyst, component B the crosslinker. Even trace amounts of the platinum catalyst can lead to gelation of the component containing the crosslinker. Therefore, tools (spatulas, stirrers, etc.) used to handle the platinum-containing component or the catalyzed compound should not come into contact with this component.\u003c\/p\u003e\r\n\u003cp\u003eThe two components should be thoroughly mixed in a weight or volume ratio of 9:1. To eliminate air introduced during dispensing or trapped under components or equipment, vacuum containment is recommended.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e :\u003c\/p\u003e\r\n\u003cp\u003eThe curing time of additional curing silicone rubber is highly dependent on the temperature, size and heat sink properties of the part being cast. Reactivity can be adjusted within wide limits by adding Catalyst EP or Inhibitor PT 88, depending on the processing requirements of the specific application. Catalyst EP increases reactivity, i.e. pot life and curing time are shortened. Inhibitor PT 88 is a pot life extender and extends the pot life and curing time. More information can be found in our brochure \"Catalyst EP\/Inhibitor PT88\".\u003c\/p\u003e\r\n\u003cp\u003eWe recommend performing preliminary testing to optimize conditions for the specific application.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePackaging and storage\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe 'Best Before' date of each batch is stated on the product label. Storage after the date stated on the label does not necessarily mean that the product is no longer usable. However, in this case, the properties required for the intended use must be checked for quality assurance reasons.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety instructions\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAccording to the latest insights, the addition-curing silicone rubber ELASTOSIL® RT 601 A\/B does not contain any toxic or corrosive substances that require special precautions when handling.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e \u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/ELASTOSIL-RT-602-AB-en-2024.06.16.pdf\"\u003eTDS Technical data sheet EN Elastosil RT 602 A\/B\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e \u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/MSDS EL RT 602 A EN.pdf\"\u003eEN - Safety data sheet EL RT 602 A\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e \u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/MSDS EL RT 602 B EN.pdf\"\u003eNL - Safety data sheet EL RT 602 B\u003c\/a\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1kg. Set (0.9 kg. A + 0.1 kg. B)","offer_id":49531859239253,"sku":"S11689","price":74.0,"currency_code":"EUR","in_stock":true},{"title":"5 kg. Set (4.5 kg. A + 0.5 kg. B)","offer_id":49531859304789,"sku":"S11690","price":358.61,"currency_code":"EUR","in_stock":true},{"title":"20 kg. Set (18A + 2 B)","offer_id":49531859370325,"sku":"S11691","price":1419.9,"currency_code":"EUR","in_stock":true},{"title":"30kg. Set (27A + 3 B) Quotation request","offer_id":49531859435861,"sku":"A10179 + A10180","price":2087.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-rt-602-48098034450773.jpg?v=1769616335"},{"product_id":"siliconen-dm-350-cst","title":"PDMS 350 cSt EP, Silikonöl für Pharma","description":"\u003cp\u003e\u003cstrong\u003e\u003cb\u003eDimethicone 350 cSt for Pharma\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis is an extra pure PDMS (silicone oil) suitable for pharma and cosmetics.\u003cbr \/\u003eSilicone oil is made from silicon. Nedform silicone oil can be used for countless purposes.\u003c\/p\u003e\r\n\u003cp\u003e✔ minimal change in physical properties over a wide temperature range\u003cbr \/\u003e✔ excellent water-repellent properties\u003cbr \/\u003e✔ good dielectric properties\u003cbr \/\u003e✔ low surface tension and therefore high surface activity chemically very non-reactive\u003cbr \/\u003e✔ low pour point\u003cbr \/\u003e✔ good solubility in a wide range of solvents\u003c\/p\u003e\r\n\u003cp\u003eThis very liquid silicone oil 350 cSt. can be added to molding silicones so that they will become softer and more flexible. By adding the oil, the silicone will also become more fluid and more stretchable. The oil can also be used to smooth out iron-on silicone (in the case of an iron-on spatula mold) by hand.\u003c\/p\u003e\r\n\u003cp\u003eThis oil can be used in products that come into contact with food or drink according to FDA 21 CFR Par177.2600.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eExtra pure for pharma\u003c\/li\u003e\r\n\u003cli\u003eEasy to add\u003c\/li\u003e\r\n\u003cli\u003eFor addition and condensation silicones\u003c\/li\u003e\r\n\u003cli\u003eColorless and odorless\u003c\/li\u003e\r\n\u003cli\u003eHarmless\u003c\/li\u003e\r\n\u003cli\u003eVery thin liquid \/ Low viscous (350 cSt)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eViscosity: 350 cSt\u003c\/li\u003e\r\n\u003cli\u003eAuto-ignition temperature: about 410°C\u003c\/li\u003e\r\n\u003cli\u003eFlash point 260 °C in closed cup, \u0026gt; 300°C in open cup\u003c\/li\u003e\r\n\u003cli\u003eFreezing point: -50°C\u003c\/li\u003e\r\n\u003cli\u003eDensity at 25°C: 0.97 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eSurface tension: 21.1 mN\/m\u003c\/li\u003e\r\n\u003cli\u003eRefractive index at 25°C: 1.403\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eshelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAt least 5 years.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/DE\/DE%20-%20Produktinformationen%20Silikonöl%2050%20cSt.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Nedform Silicone Oil.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL - Productinformatie Nedform Siliconen Olie.pdf\"\u003eEN - Product information Nedform Silicone Oil.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/DE\/DE%20-%20Produktinformationen%20Silikonöl%20350%20cSt.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e \u003ca title=\"EN - Product information Nedform Silicone Oils.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product information Nedform Silicone Oils.pdf\"\u003eEN - Product information Nedform Silicone Oils.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/DE\/DE%20-%20Produktinformationen%20Silikonöl%20350%20cSt.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"BRB Silicone Oils Food Grade.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/BRB Silicone Oils Food Grade.pdf\"\u003eBRB Silicone Oils Food Grade.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Atoro","offers":[{"title":"0.9 Kg DM 350 cSt Pharma","offer_id":49531859534165,"sku":"S11733","price":36.37,"currency_code":"EUR","in_stock":true},{"title":"4.5 Kg DM 350 cSt Pharma","offer_id":49531859566933,"sku":"S11665","price":142.62,"currency_code":"EUR","in_stock":true},{"title":"25 Kg DM 350 cSt Pharma","offer_id":49531859599701,"sku":"S11532","price":745.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/atoro-dimethicone-pdms-350-cst-ep-siliconen-olie-voor-pharma-48098034352469.png?v=1758542700"},{"product_id":"siliconen-lsr-topcoat-he-matterend-en-wrijvingsver","title":"LSR Topcoat HE","description":"\u003cp\u003eThis silicone coating is applied to cured silicone to mattify and reduce friction.\u003c\/p\u003e\r\n\u003cp\u003eLSR Top Coat HE is a two-component translucent matt coating with high elongation for spraying technology. It has been developed as an abrasion resistant coating for printed silicone elastomer substrates based on LSR. Surfaces to be coated must be free from dust and grease but do not require further pre-treatment. LSR Top Coat HE will vulcanise quickly by heat treatment in a ventilated hot-air oven.\u003c\/p\u003e\r\n\u003cp\u003eLSR Top Coat, offered by Momentive Performance Materials, is a two-component, low-friction, protective, translucent matte coating for use in applications such as respiratory masks or orthopedic devices, industrial seals or keyboards.\u003c\/p\u003e\r\n\u003cp\u003eThis food-safe and skin-friendly silicone coating adheres smoothly to addition silicones (HTV, LSR and RTV) and has a very long processing time. The curing time at elevated temperature is short.\u003c\/p\u003e\r\n\u003cp\u003eThis silicone coating has good stretchability. This prevents too rapid cracking with a flexible substrate.\u003c\/p\u003e\r\n\u003cp\u003eThis coating is easy to color in, making it an ideal base material for permanent painting of silicone.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eKey Features and Benefits\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eLSR Top Coat HE is distinguished by the following properties:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003every good adhesion to silicone substrates\u003c\/li\u003e\r\n\u003cli\u003ehigh elongation\u003c\/li\u003e\r\n\u003cli\u003ehigh reactivity\u003c\/li\u003e\r\n\u003cli\u003eneutral odour and taste\u003c\/li\u003e\r\n\u003cli\u003eexcellent stability and flexibility at low temperatures\u003c\/li\u003e\r\n\u003cli\u003esuitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations *\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e* The ingredients used to formulate this product are compositionally compliant with 21 CFR 177.2600, Rubber articles intended for repeated use and the BfR recommendation XV “Silicone”. It is the responsibility of the user to determine that the finished product complies with the provisions of 21 CFR 177.2600 and BfR recommendation XV under their specific manufacturing procedures. See 21 CFR 177.2600 and BfR recommendation for details of extractive limitations and other requirements.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTypical Physical Properties\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eColour: colourless matt\u003cbr \/\u003eViscosity, mixed 1:1 at 20°C: 400 mPas. (DIN 53 019)\u003cbr \/\u003eAbrasion resistance: 100 cycles (Norman Tool Tester, 175 g, paper, continuous mode, at 50 µm dry film thickness)\u003c\/p\u003e\r\n\u003cp\u003eThe pot-life of the two-component mixture (ratio 1:1) at 20° C is three days. Increased temperature reduces the pot-life.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePotential Applications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eBecause of the outstanding properties LSR Top Coat HE is suitable for LSR, heat cured silicone rubbers as well as room temperature vulcanisates\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing Recommendations\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003eAgitate LSR Top Coat HE well before use!\u003c\/em\u003e\u003cbr \/\u003eThe mixture, consisting of the two components in ratio 1:1, should be mixed approx. 5 minutes by means of suitable mixer with moderate shear rate. For cleaning use non polar solvent. If necessary a continuous mixing device should be provided in the storage container of the mixed Top Coat. The Top Coat should be crosslinked immediately after spraying by heat treatment at 100 - 180 °C in a ventilated hot-air oven. There should be sufficient admission of fresh air, so that no surface disturbance arises.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eStorage \u003c\/strong\u003e\u003cbr \/\u003eLSR Top Coat HE has a warranty period of 6 months from date of manufacture, if stored in the original sealed boxes and stored at dry conditions at room temperature (max. 27 deg. C,\u0026lt; 60 % rel. humidity).\u003c\/p\u003e\r\n\u003cp\u003eThe shelf-life will be indicated by the “use before date” on the associated Certificate of Analysis\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSecurity requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/milieu.png?v=1726531270\" alt=\"\" width=\"100\" height=\"99\" \/\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eH-CodeHazard Statements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eH412: Harmful to aquatic life with long lasting effects.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/handschoenen.png?v=1726531271\" alt=\"\" width=\"100\" height=\"100\" \/\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/bril.png?v=1726531273\" alt=\"\" width=\"100\" height=\"100\" \/\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/handen-wassen.png?v=1726531271\" alt=\"\" width=\"100\" height=\"100\" \/\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eP-Code Precautionary Statements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eP273: Avoid release to the environment.\u003c\/p\u003e\r\n\u003cp\u003eP501: Dispose of contents\/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDocumentation\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"Productinformatieblad SAM HT Epoxy Resin\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- Productinformatie SAM HT Epoxy Resin.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"EN - Product Information LSR Topcoat HE.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information LSR Topcoat HE.pdf\"\u003eEN - Product Information LSR Topcoat HE.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"Productinformatieblad SAM HT Epoxyhars\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- Productinformatie SAM HT Epoxy Resin.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e \u003ca title=\"Brochure LSR Topcoat.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/Brochure LSR Topcoat.pdf\"\u003eBrochure LSR Topcoat.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"Productinformatieblad SAM HT Epoxy Resin\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- Productinformatie SAM HT Epoxy Resin.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"EN - Safety data sheet Silopren LSR Topcoat HE A.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - Safety data sheet Silopren LSR Topcoat HE A.pdf\"\u003eEN - Safety data sheet Silopren LSR Topcoat HE A.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"Productinformatieblad SAM HT Epoxy Resin\" href=\"https:\/\/docs.nedform.com\/DOC\/NL\/NL%20- Productinformatie SAM HT Epoxy Resin.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"EN - Safety data sheet Silopren LSR Topcoat HE B.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - Safety data sheet Silopren LSR Topcoat HE B.pdf\"\u003eEN - Safety data sheet Silopren LSR Topcoat HE B.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Momentive Performance Materials","offers":[{"title":"100 gram Kit","offer_id":49531868184917,"sku":"S11078","price":32.5,"currency_code":"EUR","in_stock":true},{"title":"500 gram Kit","offer_id":49531868217685,"sku":"S11085","price":145.0,"currency_code":"EUR","in_stock":true},{"title":"1 kg. Kit","offer_id":49531868250453,"sku":"S11205","price":282.0,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531868283221,"sku":"S11326","price":2740.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/momentive-performance-materials-lsr-topcoat-he-48098040676693.jpg?v=1727352884"},{"product_id":"siliconen-lijm-elastosil-e43n","title":"Wacker ELASTOSIL® E43 N Transparent – Food-Grade Silicone Adhesive for Addition Silicones \u0026 Industry","description":"\u003ch2\u003ePremium RTV-1 Silicone Adhesive for Professional Food-Grade and Industrial Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® E43 N Transparent\u003c\/strong\u003e is a high-quality 1-component, neutral-cure (oxime-cure) solvent-free silicone adhesive and sealant, specifically developed as a food-safe and addition-silicone-friendly variant of the classic E43. The biggest advantage over E43: E43 N does \u003cem\u003enot\u003c\/em\u003e inhibit the cure of platinum-cure (addition) silicones, making this adhesive indispensable in professional silicone workshops. Transparent color, self-leveling, UV-resistant, and electrically insulating. Available in 90 ml and 310 ml cartridges.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood-Safe:\u003c\/strong\u003e Suitable for use in contact with food – ideal for culinary molds, kitchen applications, and food-grade assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddition-Silicone-Friendly:\u003c\/strong\u003e Does not inhibit the cure of platinum-cure silicones – essential for professional silicone workshops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent-Free:\u003c\/strong\u003e Safer to use than E41 – no solvent fumes, suitable for enclosed spaces with good ventilation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Leveling:\u003c\/strong\u003e Automatically flows smooth for an even, professional finish without post-processing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV and Weather Resistant:\u003c\/strong\u003e Maintains elasticity and transparency during prolonged exposure to UV light and weather conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrically Insulating:\u003c\/strong\u003e Suitable for electronics applications, potting, and sealing components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFood-safe assembly and repair of culinary silicone molds and kitchenware\u003c\/li\u003e\n\u003cli\u003eProfessional silicone workshops: bonding and sealing alongside platinum-cure silicones without inhibition risk\u003c\/li\u003e\n\u003cli\u003eElectronics and potting: sealing of components, sensors, and housings\u003c\/li\u003e\n\u003cli\u003eAutomotive and industry: sealing joints and seams in demanding environments\u003c\/li\u003e\n\u003cli\u003eBattery potting for e-bikes, drones, and electric vehicles\u003c\/li\u003e\n\u003cli\u003eLaboratory and DIY: universal silicone adhesive for repairing and assembling silicone products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Characteristics\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eComparison with E43:\u003c\/strong\u003e E43 N is slightly stronger than the standard \u003ca rel=\"noopener\" href=\"https:\/\/www.siliconesandmore.com\/products\/elastosil-e43\" target=\"_blank\"\u003eE43\u003c\/a\u003e and has the unique advantage of not inhibiting the cure of addition silicones. Choose E43 N when working in combination with platinum-cure silicones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSand the surface, remove dust and contamination\u003c\/li\u003e\n\u003cli\u003eDegrease with thinner or alcohol and allow to evaporate completely\u003c\/li\u003e\n\u003cli\u003eApply E43 N and spread evenly – the product self-levels\u003c\/li\u003e\n\u003cli\u003eAllow 15 minutes for surface drying; full strength after 24 hours\u003c\/li\u003e\n\u003cli\u003eAlways perform a small test on the specific substrate first\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eSafety Information:\u003c\/strong\u003e Approximately 4% of the weight of acetic acid is split off during curing. Work only in well-ventilated areas. Avoid contact with mucous membranes and eyes. In case of eye contact: rinse immediately with water. Consult the safety data sheet for complete information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a world leader in silicone technologies for food-safe applications, industrial sealing, and electronics with over 100 years of expertise in RTV silicones.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on surface preparation, adhesive properties, the difference between E43 and E43 N, and optimal results for your specific sealing or bonding application. Contact us for technical datasheets or the safety data sheet.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Wacker","offers":[{"title":"Cartridge 90 ml","offer_id":50344003731797,"sku":"A90519","price":22.95,"currency_code":"EUR","in_stock":true},{"title":"Cartridge 310 ml ","offer_id":49531868578133,"sku":"A11656","price":38.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-e43-n-transparent-voedselveilige-silicone-l-48098043068757.jpg?v=1778159098"},{"product_id":"elastosil-m-4670","title":"Wacker Elastosil® M 4670 A\/B – Beige Additie Silicone voor Mallen \u0026 Reproductie","description":"\u003cp\u003ePourable, 2-component silicone, with a Shore A 55 (hard) end result. Very suitable for molds for casting resins such as polyurethane and epoxy.\u003cbr \/\u003e\u003cbr \/\u003eMain application: Making shrink-free molds with excellent reproduction accuracy.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003eThis product is intended for the business market. For larger quantities or customized products, you can contact us via info@nedform.com or +31 (0)46-3030989.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio: A\/B = 10\/1\u003c\/li\u003e\r\n\u003cli\u003eColor: beige\u003c\/li\u003e\r\n\u003cli\u003eProcessing time (Pot life) at 23°C: 90 minutes\u003c\/li\u003e\r\n\u003cli\u003eCuring time at 23°C: 12 hours\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore A 55\u003c\/li\u003e\r\n\u003cli\u003eDensity: 1.28 g\/cm³\u003c\/li\u003e\r\n\u003cli\u003eTensile strength: \u0026gt; 5.5 N\/mm²\u003c\/li\u003e\r\n\u003cli\u003eStretchability: \u0026gt; 250 %\u003c\/li\u003e\r\n\u003cli\u003eLinear shrinkage: \u0026lt; 0.1 %\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eMix the A and B components carefully and in the indicated ratio (10 parts A and 1 part B by weight). Process the mixture within the pot life and wait with demoulding until it has completely hardened. You can possibly speed up the curing process by placing the whole in an oven. Please note that in that case air bubbles have less time to escape. After demoulding, we recommend baking the mold for a while at 100°C for 2 to 3 hours to degas it completely.\u003c\/p\u003e\r\n\u003cp\u003eNote: Potlife\/demolding time strongly depends on temperature! At a higher temperature, the processing time and demolding time are shorter.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eExtra information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe best way to avoid trapping air bubbles is to vacuum the silicone immediately after mixing. To avoid air bubbles, stir the A and B components well but slowly without knocking in air. It is best to make a “figure-8” movement.\u003c\/p\u003e\r\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: This is an addition silicone. These silicones can be poisoned by sulfur, nitrogen, amino compounds and metal salts. If you are not sure whether the products you use (including gloves, spatulas and cups) contain these ingredients, do a small test first. These substances can be found in many latex gloves, some plastilines, lacquers and adhesives, condensation silicones, 1-component silicone sealant, natural rubbers and 3D printing material (especially stereolithography). If you still want to use this, you will have to put on a protective layer of poly vinyl alcohol.\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided that the silicone is stored in closed packaging, between 5°C and 25°C, the shelf life is at least 1 year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety requirements\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eIf you often work with the silicone, it is recommended to wear gloves during processing and to ventilate the room well. For safety instructions, please refer to the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"Technisch datablad Wacker Elastosil M 4641\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - MTDS ELASTOSIL M 4670 .pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eTechnichal datasheet Wacker Elastosil M 4670\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"Technisch datablad Wacker Elastosil M 4641\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20- MTDS ELASTOSIL M 4641.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003ca title=\"Technisch datablad Wacker Elastosil M 4641\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - MSDS Elastosil M 4670 A.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet Wacker Elastosil M 4670 A\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca title=\"Technisch datablad Wacker Elastosil M 4641\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20- MTDS ELASTOSIL M 4641.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003ca title=\"Safety data sheet Wacker Elastosil M 4670 B\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - MSDS Elastosil M 4670 B.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety data sheet Wacker Elastosil M 4670 B\u003c\/a\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1.1 Kg Set (1 kg A + 100 grams B)","offer_id":50713544884565,"sku":"S11707","price":57.0,"currency_code":"EUR","in_stock":true},{"title":"5.5 kg. Set (5 A + 0.5 B)","offer_id":49531868938581,"sku":"S11343","price":281.75,"currency_code":"EUR","in_stock":true},{"title":"22 kg. Set (20 A + 2 B)","offer_id":49531868971349,"sku":"S11246","price":1010.12,"currency_code":"EUR","in_stock":true},{"title":"220 kg. Set (200 A + 20 B)","offer_id":49531869004117,"sku":"A10294","price":9518.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4670-ab-beige-additie-silicone-voor-mall-48098039038293.jpg?v=1779973486"},{"product_id":"elastosil-m-4630","title":"Wacker Elastosil® M 4630 A\/B – White Food-Safe Addition-Cure Silicone for Concrete Molds \u0026 Casting Resins","description":"\u003ch2\u003ePremium Food-Safe Addition-Cure Silicone for Professional Concrete and Casting Resin Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Elastosil® M 4630 A\/B\u003c\/strong\u003e is a pourable, addition-curing (platinum-cure) two-component silicone rubber (RTV-2) that cures shrink-free at room temperature. Curing can be considerably accelerated by applying heat. With a low Shore A hardness of approximately 28, a white final cure and outstanding resistance to concrete, this material is designed for making durable molds. The mixing ratio is 10:1 by weight, the pot life is approximately 90 minutes and the product is tack-free after approximately 12 hours. Thanks to its good flow and self-deaeration, the material delivers sharp, accurate reproductions of models with deep undercuts. Core applications are concrete molds and casting reproduction materials such as casting resins.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e✓ \u003cstrong\u003eLow hardness Shore A28\u003c\/strong\u003e – supple mold that demolds easily even with deep undercuts\u003c\/li\u003e\n\u003cli\u003e✓ \u003cstrong\u003eHigh tear strength \u003e 30 N\/mm\u003c\/strong\u003e – long mold service life under repeated use\u003c\/li\u003e\n\u003cli\u003e✓ \u003cstrong\u003eTensile strength 6.5 N\/mm² with 700% elongation\u003c\/strong\u003e – withstands mechanical stress during demolding\u003c\/li\u003e\n\u003cli\u003e✓ \u003cstrong\u003eLinear shrinkage \u003c 0.1%\u003c\/strong\u003e – dimensionally accurate reproductions without chemical shrinkage\u003c\/li\u003e\n\u003cli\u003e✓ \u003cstrong\u003eMixed viscosity 10,000 mPa·s\u003c\/strong\u003e – good flow and self-deaeration for bubble-free molds\u003c\/li\u003e\n\u003cli\u003e✓ \u003cstrong\u003eFood-safe per EC 1935\/2004 (BfR XV)\u003c\/strong\u003e – suitable for food contact when properly processed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e→ Molds for casting concrete reproductions with deep undercuts\u003c\/li\u003e\n\u003cli\u003e→ Casting molds for casting resins (epoxy, polyurethane, polyester)\u003c\/li\u003e\n\u003cli\u003e→ Decorative concrete elements and architectural concrete\u003c\/li\u003e\n\u003cli\u003e→ Reproduction of models in restoration and sculpture\u003c\/li\u003e\n\u003cli\u003e→ Culinary molds where food contact is required\u003c\/li\u003e\n\u003cli\u003e→ Prototyping and small-series production of castings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProcessing Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eFirst stir component A and component B separately and thoroughly.\u003c\/li\u003e\n\u003cli\u003eMix A and B in a 10:1 ratio by weight. Use A and B only with the same batch number.\u003c\/li\u003e\n\u003cli\u003eMix slowly and thoroughly in a figure-8 motion until homogeneous; avoid trapping air.\u003c\/li\u003e\n\u003cli\u003eOptionally degas the mixture under vacuum for an optimally bubble-free result.\u003c\/li\u003e\n\u003cli\u003ePour the mixture within the pot life of approximately 90 minutes.\u003c\/li\u003e\n\u003cli\u003eAllow to cure for approximately 12 hours at room temperature; curing can be accelerated with heat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWacker Chemie AG is the world market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\u003cdiv style=\"background:#fff3cd;border:2px solid #ffc107;color:#856404;padding:15px;border-radius:8px;\"\u003e⚠️ \u003cstrong\u003ePlatinum-cure inhibition:\u003c\/strong\u003e addition-curing silicones can be inhibited by contact with, among others, condensation silicones, latex, sulfur-containing materials, and tin- and amine-containing substances. When in doubt, always test on a small area first.\u003c\/div\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eNot sure whether Elastosil M 4630 A\/B is right for your concrete or resin casting project? We are happy to help you choose the right silicone for your application. Contact us for advice, samples or larger quantities.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"5.5 kg. Set (5 A +0.5 B) B2B","offer_id":49531880866133,"sku":"S11592","price":196.75,"currency_code":"EUR","in_stock":true},{"title":"22 kg. Set (20 A + 2 B) B2B","offer_id":49531880898901,"sku":"S11591","price":734.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4630-ab-witte-voedselveilige-additie-sil-48098050081109.jpg?v=1780308289"},{"product_id":"elastosil-rt-620","title":"Wacker Elastosil® RT 620 A\/B – Very Soft Addition Silicone for Pad Printing \u0026 Industrial Printing","description":"\u003ch2\u003ePremium Very Soft Addition Silicone for Professional Pad Printing and Industrial Printing Applications\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® RT 620 A\/B\u003c\/strong\u003e is a pourable, room temperature-curing addition silicone (platinum-cure) for the production of printing pads. The product cures at room temperature with a Shore A hardness of 17, a translucent end product, and shrinkage of a maximum of 0.1%. With a pot life of 35 minutes and a tack-free cure time of 4 hours at 23°C, this system is suitable for efficient production processes. The mixing ratio is 10:1 (A:B) by weight, with the platinum catalyst located in component B — use only components with the same lot number. ELASTOSIL® RT 620 A\/B is ideally suited for applications where exceptional ink transfer, long mechanical life, and stable softness at high production volumes are essential.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShore A hardness 17 – exceptionally soft:\u003c\/strong\u003e the low hardness ensures optimal adaptation to irregular surfaces and maximum ink absorption and release in pad printing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTear strength ≥ 12 N\/mm – long service life:\u003c\/strong\u003e excellent resistance to tearing and puncturing guarantees a long and stable use of the pad, even at high production volumes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElongation at break 900% – flexible and resilient:\u003c\/strong\u003e the extreme elongation prevents cracking under mechanical stress and makes the pad suitable for complex printing forms.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot life 35 minutes – ample processing time:\u003c\/strong\u003e the high reactivity combined with a workable pot life allows for careful dosing and pouring, even when adding silicone oil thinner.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShrinkage ≤ 0.1% – dimensionally accurate:\u003c\/strong\u003e the almost shrinkage-free curing guarantees dimensionally accurate pads that can be used immediately after demolding without post-processing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFDA and BfR XV compliant – food safe:\u003c\/strong\u003e the product complies with European and American food safety regulations (EC 1935\/2004, BfR XV Silicones), making it also suitable for use in the food industry and culinary applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eProduction of printing pads for pad printing on ceramic, porcelain, and glass surfaces\u003c\/li\u003e\n  \u003cli\u003ePrinting of plastic parts with irregular or curved surfaces, such as electronics and automotive components\u003c\/li\u003e\n  \u003cli\u003ePad printing on promotional and advertising articles with complex 3D geometries\u003c\/li\u003e\n  \u003cli\u003eIndustrial marking and coding on metal parts and tools\u003c\/li\u003e\n  \u003cli\u003eCulinary applications where food safety is required, such as stamping on edible products\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003eStir component A and component B separately and thoroughly before use, so that any settled filler is completely incorporated.\u003c\/li\u003e\n  \u003cli\u003eWeigh component A and component B in a 10:1 (A:B) weight ratio. Note: use only components with the same lot number.\u003c\/li\u003e\n  \u003cli\u003eMix the components slowly and thoroughly for at least 3 minutes with a spatula in a figure-8 motion to minimize air entrapment.\u003c\/li\u003e\n  \u003cli\u003eOptional: degas the mixture in a vacuum chamber for 5–10 minutes for a bubble-free end product.\u003c\/li\u003e\n  \u003cli\u003ePour the mixture into the mold or pad printing form within the 35-minute pot life.\u003c\/li\u003e\n  \u003cli\u003eAllow to cure at room temperature (23°C) for at least 4 hours (tack-free) to 24 hours for full mechanical properties. Curing can be accelerated by applying heat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eThe hardness of the pad can be gradually reduced by adding Wacker Silicone Oil AK 35. With 20 wt.% oil, the Shore A hardness drops to approximately 8; with 50 wt.% to Shore A 1 and Shore 00 35. This offers complete control over the pad properties for each printing application.\u003c\/p\u003e\n\n\u003cp\u003eManufactured by \u003cstrong\u003eWacker Chemie AG\u003c\/strong\u003e, global market leader in the development and production of silicones for industrial and technical applications.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Warning: Inhibition in Addition Silicones\u003c\/h3\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the materials you are using (gloves, spatulas, molds) contain these substances, please do a small test first. Inhibiting substances are found in, among others, latex gloves, some plasticines, condensation silicones, 1-component silicone sealants, and certain 3D printing materials. If in doubt, apply a layer of polyvinyl alcohol (PVA) as a release layer.\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\n\u003cp\u003eELASTOSIL® RT 620 A\/B is available in various packaging sizes and can be combined with Wacker Silicone Oil AK 35 for precise hardness adjustment. Please contact us for technical data sheets, processing manuals, or product advice.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"1.1kg. Set (1 kg. A + 0.1 kg. B)","offer_id":49531881390421,"sku":"S10647","price":49.95,"currency_code":"EUR","in_stock":true},{"title":"5.5kg. Set (5 kg. A + 0.5 kg. B)","offer_id":49531881455957,"sku":"S10648","price":225.0,"currency_code":"EUR","in_stock":true},{"title":"33 kg. Set (30 A + 3 B)","offer_id":49531881488725,"sku":"A10230","price":1329.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-rt-620-ab-zeer-zachte-additie-silicone-voo-48098050441557.jpg?v=1779797082"},{"product_id":"siliconen-culinair","title":"Silicone Culinair® – Food-Safe Platinum Silicone for Chocolate \u0026 Culinary Molds","description":"\u003ch2\u003ePremium Food-Safe Silicone for Professional Culinary Applications\u003c\/h2\u003e\n\u003cp\u003e \u003cstrong\u003eSilicone Culinair®\u003c\/strong\u003e is a two-component, platinum-cure (addition-crosslinking) casting silicone with TÜV and FDA certification, specifically developed for direct contact with food. This high-quality silicone combines extreme temperature resistance (-40°C to +280°C) with minimal shrinkage and excellent detail reproduction, ideal for creating professional molds for chocolate, confectionery, fondant, and other culinary creations. A simple 1:1 mixing ratio ensures reliable results.\u003c\/p\u003e\n\u003ch3\u003e Key Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eTÜV \u0026amp; FDA certified:\u003c\/strong\u003e 100% food safe for direct contact with all foods after proper processing and post-curing\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eExtreme temperature resistance:\u003c\/strong\u003e From -40°C to +280°C - suitable for freezer, refrigerator and oven without degradation\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePlatinum-cure technology:\u003c\/strong\u003e Minimal shrinkage (\u0026lt;0.1%), no inhibition with most materials, long service life\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSimple 1:1 mixing ratio:\u003c\/strong\u003e A:B = 1:1 by weight for error-free processing without complex calculations\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSelf-venting and good flowability:\u003c\/strong\u003e Excellent detail reproduction without vacuum treatment\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eHigh mechanical strength:\u003c\/strong\u003e High tensile strength and durability for hundreds of casts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003e Typical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e Chocolate molds for bonbons, pralines, chocolate figures and artisan chocolatiers\u003c\/li\u003e\n\n\u003cli\u003e Sugarcraft molds for fondant, marzipan, isomalt decorations and pastries\u003c\/li\u003e\n\n\u003cli\u003e Ice cubes and ice molds for unique cocktail creations and catering\u003c\/li\u003e\n\n\u003cli\u003e Pastry decorations, cupcake toppers and cake ornaments for bakeries\u003c\/li\u003e\n\n\u003cli\u003e Heat-resistant molds for caramel, toffee and boiled sugars\u003c\/li\u003e\n\n\u003cli\u003e Freezer-safe moulds for ice cream, sorbet and frozen desserts\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eProcessing instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\n\u003cli\u003e Make sure your model is clean and dry\u003c\/li\u003e\n\n\u003cli\u003e Mix components A and B carefully in a ratio of 1:1 (by weight) by hand or machine\u003c\/li\u003e\n\n\u003cli\u003e Process the mixture within the pot life of 60 minutes\u003c\/li\u003e\n\n\u003cli\u003e Wait until the whole has completely hardened before de-moulding (6 hours at 20°C)\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePost-curing (essential for food safety):\u003c\/strong\u003e Place the mold in an oven at 120-140°C (250-280°F) for 2-3 hours to allow any vapors to degas. Do not allow the mold to come into direct contact with the heating element.\u003c\/li\u003e\n\n\u003cli\u003e Wash the mold thoroughly with dish soap and dry well\u003c\/li\u003e\n\n\u003cli\u003e The mold is now food safe and ready to use\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\u003cp\u003e \u003cstrong\u003eProcessing tips:\u003c\/strong\u003e Pot life and demold time are temperature-dependent; they shorten at higher temperatures. For larger molds, a plaster or plastic support mold is recommended. Store unused silicone in a cool, frost-free place for optimal shelf life (at least 1 year).\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eSilicones and More\u003c\/strong\u003e supplies high-quality, certified silicones for professional culinary applications, patisserie, and food-safe molding.\u003c\/p\u003e\n\u003ch3\u003e Important Warning: Inhibition with Additive Silicones\u003c\/h3\u003e\n\u003cp\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e This is an addition silicone (platinum cure). These silicones can be poisoned by sulfur, nitrogen, amino compounds, and metal salts. If you're unsure whether the products you use (including gloves, spatulas, and cups) contain these ingredients, perform a small test first. These substances are found in many latex gloves, some plastilines, lacquers and adhesives, condensation silicones, one-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography). If you do want to use this, you will need to apply a protective layer of polyvinyl alcohol (PVA) to the original.\u003c\/p\u003e\n\u003ch3\u003e Professional Support\u003c\/h3\u003e\n\u003cp\u003e Our technical specialists can advise you on processing techniques, post-curing procedures, food safety requirements, and optimal results for your specific culinary mold application. Contact us for technical data sheets, processing manuals, or advice on TÜV\/FDA compliance.\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 Kg Set","offer_id":49531887812949,"sku":"S15003","price":44.95,"currency_code":"EUR","in_stock":true},{"title":"2 Kg Set","offer_id":49531887845717,"sku":"S15004","price":69.95,"currency_code":"EUR","in_stock":true},{"title":"10 kg set","offer_id":49531887878485,"sku":"S15005","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"40 kg set","offer_id":49531887911253,"sku":"15006","price":1099.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-siliconen-culinair-voedselveilige-platinum-silicone-48098061091157.jpg?v=1772183279"},{"product_id":"vulstof-fumed-silica","title":"Filler Fumed Silica 150 Gr.","description":"\u003cp\u003eFumed Silica is a powder suitable for making liquid materials, thick or paste like.\u0026nbsp;When mixed properly without air entrapment this powder will disolve colorless.\u003c\/p\u003e\n\u003cp\u003eThis powder can also be used in \u003ca href=\"https:\/\/www.siliconesandmore.com\/en\/products\/siliconen-culinair\"\u003eSiliconen Culinair®\u003c\/a\u003e because the result is still food safe. This in contrast to the \u003ca href=\"https:\/\/www.siliconesandmore.com\/en\/products\/thixo-a\"\u003eThixo A\u003c\/a\u003e for addition silicone which can also be used as a fattening but which is not food safe. \u003cbr\u003eAddition of fumed silica may also increase the stiffness \/ hardness of the silicone.\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFumed Silica is a white powder that is suitable for thickening pourable silicone, polyester, epoxy and polyurethane so that they are less fluid or even paste like. Please note that the powder needs time to wet properly in order to bind the fluid well. The final result will therefore require proper mixing and time.\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eNOTE: use small amounts. We recommend that you determine this experimentally. Beginning at 0.5 mass%, and increase in increments of 0.5%\u003c\/p\u003e\n\u003cp\u003eFor silicone often a 1 % addition of fumed silica in weight is enough for a spreadable silicone.\u003c\/p\u003e\n\u003cp\u003eFor Polyurethane,\u0026nbsp;\u003c\/p\u003e\n\u003cp dir=\"auto\"\u003e\u003cstrong\u003eAlways start low:\u003c\/strong\u003e Begin with 0.5% to 1% by weight of the total resin (or of component A, the polyol).\u003c\/p\u003e\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003eIncrease in steps of 0.5% until you reach the right consistency.\u003c\/li\u003e\n\u003cli\u003eTypical amounts for a spatula-applicable (spreadable) result:\n\u003cul dir=\"auto\"\u003e\n\u003cli\u003e0.7–1%: lightly thickened, anti-sag (non-slump) liquid – still easy to pour but stays in place.\u003c\/li\u003e\n\u003cli\u003e2–3%: gel-like, ideal for most spatula applications.\u003c\/li\u003e\n\u003cli\u003e3–5% (or up to 7%): thicker paste (Vaseline- or peanut-butter consistency) for vertical fillings or fillets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003especial instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn contrast to Thixo for addition curing silicones or condensation curing silicones the Fumed Silica may be used in both addition and condensation curing silicone\u0026nbsp;\u003c\/p\u003e\n\u003cp\u003eFumed Silica also increases the hardness (Shore value) of silicone. With normal thixo this that happens to a lesser degree.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf dry stored indefinitely.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Product%20Information%20Filler%20Fumed%20silica.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\"\u003e\u003c\/strong\u003eProduct information sheet Filler Fumed Silica\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u0026nbsp;\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"150 Gr.","offer_id":49531888075093,"sku":"S10206","price":5.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-vulstof-fumed-silica-150-gr-48098059878741.jpg?v=1757510051"},{"product_id":"wacker-elastosil-vario-40-catalyst-vario-snel","title":"Wacker ELASTOSIL® VARIO 40 Fast – Transparent Platinum Silicone for Molds \u0026 Prototyping","description":"\u003ch2\u003ePremium Transparent Platinum Silicone for Professional Mold and Prototyping Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker ELASTOSIL® VARIO 40 Fast\u003c\/strong\u003e is a 2-component, addition-curing (platinum-cure) casting silicone with Shore A 40 hardness and a completely transparent color, specially developed for molds where fast turnaround times and visibility of the cast object are essential. The \u003cem\u003eFast\u003c\/em\u003e variant offers a pot life of only 2 minutes and a demolding time of 15 minutes at 20°C – ideal for production environments where speed is a priority. This professional silicone combines excellent flowability (10,000 mPa·s), high tensile strength (8 N\/mm²), food safety, and skin-friendliness with unique adaptability via the VARIO system. Mixing ratio 10:1 (A:B).\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-fast curing (Fast):\u003c\/strong\u003e Pot life 2 minutes, demoldable after 15 minutes at 20°C – maximum production efficiency for series production\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompletely transparent:\u003c\/strong\u003e The cast object remains visible in the mold for precise and accurate cutting – ideal for prototyping and complex geometries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable hardness via VARIO system:\u003c\/strong\u003e Mix VARIO 15 and VARIO 40 A-components for any desired Shore A hardness between 15 and 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable curing speed:\u003c\/strong\u003e Combine Fast and Normal B-component for any desired curing time – total B always 10% of A-weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFood and skin-friendly:\u003c\/strong\u003e Platinum-cure technology without by-products, suitable for culinary molds, podiatry, and skin contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh mechanical strength:\u003c\/strong\u003e 8 N\/mm² tensile strength and 15 N\/mm tear strength for durable, long-lasting molds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeries production of molds where fast cycle times are required\u003c\/li\u003e\n\u003cli\u003ePrototyping and rapid tooling: transparent molds for precise cutting of complex models\u003c\/li\u003e\n\u003cli\u003eCulinary molds for chocolate, confectionery, and food-safe applications (FDA compliant)\u003c\/li\u003e\n\u003cli\u003eStamps and pad printing industry: high detail reproduction and chemical resistance\u003c\/li\u003e\n\u003cli\u003ePodiatry and medical simulation: skin-friendly molds and anatomical models\u003c\/li\u003e\n\u003cli\u003eRobotics, animatronics, textile, and erotic industry: flexible, skin-friendly silicone objects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMix A and B components in a 10:1 ratio by weight\u003c\/li\u003e\n\u003cli\u003eMix slowly in a figure-8 motion to minimize air entrapment\u003c\/li\u003e\n\u003cli\u003ePour immediately – pot life is only 2 minutes; vacuuming is not recommended for the Fast variant\u003c\/li\u003e\n\u003cli\u003eDemold after 15 minutes at 20°C\u003c\/li\u003e\n\u003cli\u003eRecommended: post-bake at 100°C for 2-3 hours for complete degassing\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"max-width: 100%; margin: 30px 0; padding: 20px; background: #f8f9fa; border: 3px solid #0a4a8a; border-radius: 12px; box-shadow: 0 4px 15px rgba(10,74,138,0.12); font-family: inherit;\" class=\"silicone-mengcalculator\"\u003e\n  \u003cdiv style=\"display: flex; align-items: center; gap: 12px; margin-bottom: 16px; flex-wrap: wrap;\"\u003e\n    \u003cdiv style=\"background: #0a4a8a; color: white; padding: 8px 16px; border-radius: 9999px; font-weight: bold; font-size: 1.05rem; white-space: nowrap;\"\u003e🧪 EL ASTOSIL VARIO MIX\u003c\/div\u003e\n    \u003ch2 style=\"margin: 0; font-size: 1.55rem; color: #0a4a8a; flex: 1;\"\u003eMixing Calculator for Your Perfect Silicone\u003c\/h2\u003e\n  \u003c\/div\u003e\n  \u003cp style=\"color: #333; line-height: 1.4; margin-bottom: 20px; max-width: 680px; font-size: 0.98rem;\"\u003eCalculate exactly how much \u003cstrong\u003eElastosil Vario 15\u003c\/strong\u003e, \u003cstrong\u003eVario 40\u003c\/strong\u003e, \u003cstrong\u003eCatalyst Vario F (Fast)\u003c\/strong\u003e and \u003cstrong\u003eNormal\u003c\/strong\u003e you need.\u003cbr\u003e\u003csmall style=\"color: #e74c3c;\"\u003eAll values at 20 °C. Temperature has a significant influence!\u003c\/small\u003e\u003c\/p\u003e\n\n  \u003c!-- Main layout: 2 columns --\u003e\n  \u003cdiv style=\"display: flex; gap: 20px; align-items: flex-start;\"\u003e\n    \u003c!-- Column 1: 3 input cells stacked --\u003e\n    \u003cdiv style=\"flex: 1; display: flex; flex-direction: column; gap: 12px;\"\u003e\n\n      \u003c!-- CELL 1: Hardness --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e1. Desired Hardness (Shore A)\u003c\/h3\u003e\n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"0.1\" max=\"40\" min=\"15\" value=\"40\" id=\"shoreInput\" type=\"number\"\u003e \n          \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eShore A\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003e15 = very soft • 40 = firm\u003c\/small\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CELL 2: Working time (pot life) --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e2. Desired Working Time (Pot Life)\u003c\/h3\u003e\n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"1\" max=\"150\" min=\"3\" value=\"3\" id=\"potlifeInput\" type=\"number\"\u003e \n          \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eminutes\u003c\/span\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003c!-- CELL 3: Only total desired mix value (A + B) – cure time output removed --\u003e\n      \u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n        \u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e3. Total Desired Mix Value (A + B in grams)\u003c\/h3\u003e\n        \n        \u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n          \u003cinput style=\"width: 220px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\" step=\"50\" min=\"110\" value=\"1100\" id=\"totalMix\" type=\"number\"\u003e\n        \u003c\/div\u003e\n        \u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003eB-component = always 10 % of A-component\u003c\/small\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n\n    \u003c!-- Column 2: Your perfect mix (right) --\u003e\n    \u003cdiv style=\"flex: 1; padding: 20px; background: #0a4a8a; color: white; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.1); min-height: 100%; display: none;\" id=\"finalResult\"\u003e\n      \u003ch3 style=\"color: white; margin: 0 0 14px 0; font-size: 1.5 rem;\"\u003e✅ Your perfect mix\u003c\/h3\u003e\n      \u003cdiv style=\"display: flex; flex-direction: column; gap: 14px; font-size:1.3rem;\" id=\"finalContent\"\u003e\u003c\/div\u003e\n      \n\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003c!-- DISCLAIMER --\u003e\n  \u003cdiv style=\"margin-top: 24px; padding: 14px 20px; background: #fff3cd; border: 1px solid #ffeaa7; border-radius: 8px; color: #856404; font-size: 1.1rem; line-height: 1.45; text-align: center;\"\u003e\n    \u003cstrong\u003eDisclaimer:\u003c\/strong\u003e This calculator is merely a tool and provides an estimate based on the graph from the manual. Actual processing time and curing time may vary due to temperature, mixing technique, humidity, or other factors. Siliconesandmore accepts no liability for differing results. Always perform a small test mix first and consult the official manual.\n  \u003c\/div\u003e\n\n  \u003cdiv style=\"margin-top: 18px; text-align: center; font-size: 0.9rem; color: #555;\"\u003eTip: Purchase the sets separately if you want to adjust both hardness and speed.\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\n  \/\/ ====================== DATA FROM GRAPH (Wacker TDS + your screenshot) ======================\n  \/\/ Values checked against the attached graph:\n  \/\/ Potlife (blue line): 155 → 60 → 38 → 18 → 8 min\n  \/\/ Curing time (red line): 6.0 → 3.0 → 1.8 → 1.0 → 0.25 hours\n  \/\/ 100% F = 15 min curing (0.25 hours) as in the graph. (Your earlier note about 3 min is not found in the graph; we adhere to the official Wacker graph.)\n  const bMixData = [\n    { p: 0,   pot: 155, dem: 6.0 },\n    { p: 30,  pot:  60, dem: 3.0 },\n    { p: 50,  pot:  38, dem: 1.8 },\n    { p: 70,  pot:  18, dem: 1.0 },\n    { p: 100, pot:   8, dem: 0.25 }\n  ];\n\n  function getPercentFromTime(target, key) {\n    const data = bMixData;\n    if (target \u003e= data[0][key]) return 0;\n    if (target \u003c= data[data.length-1][key]) return 100;\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (target \u003c= data[i][key] \u0026\u0026 target \u003e= data[i+1][key]) {\n        const frac = (data[i][key] - target) \/ (data[i][key] - data[i+1][key]);\n        return data[i].p + frac * (data[i+1].p - data[i].p);\n      }\n    }\n    return 50;\n  }\n\n  function getTimeFromPercent(percent, key) {\n    const data = bMixData;\n    const p = Math.max(0, Math.min(100, percent));\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (p \u003e= data[i].p \u0026\u0026 p \u003c= data[i+1].p) {\n        const frac = (p - data[i].p) \/ (data[i+1].p - data[i].p);\n        return data[i][key] + frac * (data[i+1][key] - data[i][key]);\n      }\n    }\n    return p \u003c= 0 ? data[0][key] : data[data.length-1][key];\n  }\n\n  function updateCalculator() {\n    const totalMix = parseFloat(document.getElementById('totalMix').value) || 1100;\n    const totalA = Math.round(totalMix \/ 1.1);\n    const totalB = Math.round(totalMix - totalA);\n\n    const shore = parseFloat(document.getElementById('shoreInput').value) || 15;\n\n    const frac40 = (shore - 15) \/ 25;\n    const a15 = Math.round((1 - frac40) * totalA);\n    const a40 = Math.round(frac40 * totalA);\n\n    const potTarget = parseFloat(document.getElementById('potlifeInput').value) || 15;\n    const percentFast = getPercentFromTime(potTarget, 'pot');\n    const calculatedDem = getTimeFromPercent(percentFast, 'dem');\n\n    const bFast = Math.round((percentFast \/ 100) * totalB);\n    const bNormal = totalB - bFast;\n\n    const finalHTML = `\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eA-component (total ${totalA} g)\u003c\/strong\u003e\u003cbr\u003e\n        Vario 15: \u003cstrong\u003e${a15} g\u003c\/strong\u003e\u003cbr\u003e\n        Vario 40: \u003cstrong\u003e${a40} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eB-component (total ${totalB} g)\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Vario F: \u003cstrong\u003e${bFast} g\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Normal: \u003cstrong\u003e${bNormal} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eWorking Times\u003c\/strong\u003e\u003cbr\u003e\n        Pot life: \u003cstrong\u003e${potTarget.toFixed(0)} min\u003c\/strong\u003e\u003cbr\u003e\n        Curing time: \u003cstrong\u003e${calculatedDem.toFixed(2)} hours\u003c\/strong\u003e\n      \u003c\/div\u003e\n    `;\n    document.getElementById('finalContent').innerHTML = finalHTML;\n    document.getElementById('finalResult').style.display = 'block';\n  }\n\n  function copyMix() {\n    const final = document.getElementById('finalContent').innerText;\n    navigator.clipboard.writeText(final).then(() =\u003e {\n      const btn = document.querySelector('#finalResult button');\n      if (btn) {\n        const orig = btn.innerHTML;\n        btn.innerHTML = '✅ Copied!';\n        setTimeout(() =\u003e { btn.innerHTML = orig; }, 2000);\n      }\n    });\n  }\n\n  function initCalculator() {\n    const elements = ['shoreInput', 'potlifeInput', 'totalMix'];\n    elements.forEach(id =\u003e {\n      const el = document.getElementById(id);\n      if (el) {\n        el.addEventListener('input', updateCalculator);\n        el.addEventListener('change', updateCalculator);\n      }\n    });\n    updateCalculator();\n  }\n\n  if (document.readyState === 'loading') {\n    document.addEventListener('DOMContentLoaded', initCalculator);\n  } else {\n    initCalculator();\n  }\n\u003c\/script\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for professional mold making, food-safe applications, and industrial processes with over 100 years of expertise in platinum-cure silicones.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on hardness-mixing, curing speed, processing techniques, and optimal results for your specific mold, prototype, or stamping application. Contact us for technical datasheets, processing manuals, or advice on the VARIO system.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Wacker","offers":[{"title":"0:55 Kg Set","offer_id":49531888697685,"sku":"S11306","price":27.95,"currency_code":"EUR","in_stock":true},{"title":"1.1 Kg Set","offer_id":49531888730453,"sku":"S11308","price":39.95,"currency_code":"EUR","in_stock":true},{"title":"5.5 Kg Set","offer_id":49531888763221,"sku":"S11309","price":174.95,"currency_code":"EUR","in_stock":true},{"title":"22 Kg Set","offer_id":49531888795989,"sku":"S11312","price":619.95,"currency_code":"EUR","in_stock":true},{"title":"220 Kg. Kit","offer_id":49531888828757,"sku":"S82015","price":5999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-vario-40-snel-transparante-platinum-silico-49320249557333.png?v=1778659609"},{"product_id":"plastique-culinair-snel","title":"Plastique Culinair® Fast","description":"\u003cp\u003ePlastique Culinair® Fast is a quick setting kneadable silicone that is foodsave and skinsave.\u003c\/p\u003e\r\n\u003cp\u003eThe Silicone Plastique Culinair® Fast is a 2-component (poly-addition) silicone which cures at room temperature. Silicones are very easy to process by kneading them by hand. The silicones are ready for use after 10 minutes.\u003c\/p\u003e\r\n\u003cp\u003eSilicone Plastique Culinary when cured is resistant to temperatures from -40°C to + 280°C and is suitable for making foodgrade and skinsafe molds.\u003c\/p\u003e\r\n\u003cp\u003eCaution: Never let you the mold come into direct contact with the heating element in the oven.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eEasy to process. Kneadable\u003c\/li\u003e\r\n\u003cli\u003eFair resistance to acid \/ aggressive substances\u003c\/li\u003e\r\n\u003cli\u003eAfter curing, suitable for food contact (FDA).\u003c\/li\u003e\r\n\u003cli\u003eLow shrinkage (\u0026lt;0.1%)\u003c\/li\u003e\r\n\u003cli\u003eDe-mould time 10 min\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio in weight: A:B = 1:1\u003c\/li\u003e\r\n\u003cli\u003eWorking time at 20°C: 1,4 minutes\u003c\/li\u003e\r\n\u003cli\u003eDe-mould time at 20°C: 10 minutes\u003c\/li\u003e\r\n\u003cli\u003eFull strength after: 1 day\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore A 40\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eNote: Pot life \/ de-mould time is highly dependent on temperature! At a higher temperature, the processing time and de-mould time are shorter.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003cbr \/\u003e\u003cbr \/\u003e\u003c\/strong\u003e The Silicone Plastique Culinair® Fast can easily be mixed by (clean) hand. Knead the A and B component carefully and in the specified ratio (1 A and 1 part B) together. The Plastique Culinair® Fast should be processed within the processing time of \u003cstrong\u003e1.4 minutes\u003c\/strong\u003e. De-mould only after the specified de-moulding time. Since your mold might come into contact with foodstuffs, we recommend post curing the mold for 60 minutes in an oven at 80°C to 100°C. This is meant to release all remaining gasses in the product. Wash the mold clean with detergent and dry it well. The mold is now ready for use.\u003cbr \/\u003e\u003cbr \/\u003e\u003cspan style=\"color: #ff0000;\"\u003ePlease note: This is an addition curing silicone. This type of silicones may experience cure inhibition when coming into contact with sulfer, nitrogen, amino groups and metl salts. If you are not certain that the products you use (including gloves, spatulas and cups) contain these ingredients, please do a little test first! These components are often found in many latex gloves, some platicines, glues, laquers, condensation curing silicones, silicone caulk, natural rubbers and 3D printing materials (mainly stereolithography).\u003c\/span\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePacking \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe products are packed in cups  of 125 grams of A- and 125 grams of B-component. The components cannot be ordered separately. For larger packages we ask you to contact us through the site.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eDurability \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided that the silicone is in closed container and stored in a cool and frost-free place, the shelf life is at least 1 year.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety \u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThe hardened mixture meets the FDA requirements if proper procedure has been followed. If you work with silicone frequently or in large amounts we recommend the use of gloves and to work in a well ventilated area. For safety information see the safety data sheet.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Product%20Information%20Silicone%20Plastique%20Culinair®%20Fast.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003eProduct information sheet Plastique Culinair® Fast\u003c\/a\u003e\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"500 Gr. set","offer_id":49531889189205,"sku":"S10316","price":47.04,"currency_code":"EUR","in_stock":false},{"title":"10 kg set","offer_id":49531889221973,"sku":"S10628","price":854.13,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-plastique-culinair-snel-48098061058389.jpg?v=1757510094"},{"product_id":"htv-platinum-siliconen","title":"HTV platinum curing silicone","description":"\u003cp\u003e\u003cstrong\u003eSemsil HTV Platinum Silicone\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTop Quality HTV Platinum Silicone – Your Ultimate Solution for Versatile Applications!\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAre you in need of high-performance HTV (High Temperature Vulcanized) silicone that meets the stringent requirements of the FDA 21 CFR Section 177.2600? Look no further! Our premium HTV platinum-cured silicone offers exceptional durability and versatility, making it ideal for a wide range of applications.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eWhy Choose Our HTV Platinum Silicone?\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eFDA Compliant: Meets FDA 21 CFR Section 177.2600 standards, ensuring it is safe for food contact applications.\u003c\/li\u003e\r\n\u003cli\u003eAvailable in Multiple Shore Hardnesses: Choose from Shore 40, 60, and 80 to perfectly match your specific needs.\u003c\/li\u003e\r\n\u003cli\u003eColorless and Easy to Pigment: Naturally colorless, our silicone is highly receptive to pigments, allowing you to customize the color to your exact requirements. Use Silicon gum based dyes.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eKey Benefits:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eExcellent Mechanical Properties: Our HTV platinum silicone is known for its outstanding tensile strength and tear resistance, ensuring longevity and reliability in your products.\u003c\/li\u003e\r\n\u003cli\u003eSuperior Temperature Resistance: With the ability to withstand extreme temperatures, it is perfect for both high-heat and low-temperature environments. (-50 to + 180 \u003csup\u003eo\u003c\/sup\u003eC), temperatures outside this range should be tested by the customer.\u003c\/li\u003e\r\n\u003cli\u003eHigh Chemical Resistance: Resistant to many chemicals and solvents, making it suitable for diverse industrial applications.\u003c\/li\u003e\r\n\u003cli\u003eEasy Processing: Designed for user-friendly processing, reducing production time and costs.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eProperties\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eTypical values for the Shore A 40 type\u003c\/p\u003e\r\n\u003ctable\u003e\r\n\u003cthead\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eCharacteristic\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eTest Method\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eValue\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eTolerance\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eUnit\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/thead\u003e\r\n\u003ctbody\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eColour\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eVisual\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eTranslucent\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e-\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e-\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eSpecific gravity\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eASTM D 1217 \/ ISO 1183\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e1.13\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e± 0.03\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e-\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eHardness\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eASTM D 2240 \/ ISO 7619\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e40\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e± 5\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eShore A\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eElongation at break\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eASTM D 412 \/ ISO 37\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e800\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003emini\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e%\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eTensile strength\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eASTM D 412 \/ ISO 37\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e9\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003emini\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eMPa\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eTear strength\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eASTM D 624 \/ ISO 34\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e45\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003emini\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003ekN\/m\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003ctr\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eCompression set\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003eASTM D 395 \/ ISO 815\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e-\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e\r\n\u003cp\u003e-\u003c\/p\u003e\r\n\u003c\/td\u003e\r\n\u003ctd\u003e \u003c\/td\u003e\r\n\u003c\/tr\u003e\r\n\u003c\/tbody\u003e\r\n\u003c\/table\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eImportant: this silicone is NOT liquid and must be cured under pressure using a heated press.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCuring: 10 minutes at 175°C at the correct pressure for your process\u003c\/li\u003e\r\n\u003cli\u003ePost Curing: 4 hours at 200°C\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMedical Devices: Ideal for use in medical tubing, seals, and gaskets due to its biocompatibility and safety. Suitability and certification is to be checked and done by the customer\/ producer of the end product.\u003c\/li\u003e\r\n\u003cli\u003eFood and Beverage Industry: Perfect for baking molds, seals, and gaskets that come into direct contact with food. Food grade of end product is to be certified by the customer\/ producer of such end products!\u003c\/li\u003e\r\n\u003cli\u003eIndustrial Applications: Suitable for creating durable molds, prototypes, and other high-precision industrial components.\u003c\/li\u003e\r\n\u003cli\u003eConsumer Goods: Ideal for creating custom silicone products, including toys, kitchenware, and more.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eDon't compromise on quality! Choose our HTV platinum-cured silicone for unparalleled performance and compliance with the highest industry standards. Contact us today to learn more and place your order.\u003c\/p\u003e\r\n\u003ch2\u003e\u003cstrong\u003eWhat is HCR\/HTV Silicone Rubber?\u003c\/strong\u003e\u003c\/h2\u003e\r\n\u003cp\u003e\u003cstrong\u003eHCR silicone\u003c\/strong\u003e (High Consistency Rubber) is a type of silicone rubber with high viscosity and a paste-like, solid consistency. It is processed using traditional rubber manufacturing techniques such as:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cstrong\u003eExtrusion\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eCompression or transfer molding\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eCalendering\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eHTV silicone\u003c\/strong\u003e (High Temperature Vulcanizing) is a subcategory of HCR silicone that requires high-temperature curing. While HCR refers to the material's consistency, HTV emphasizes the vulcanization process.\u003c\/p\u003e\r\n\u003chr \/\u003e\r\n\u003ch3\u003eKey Features of HCR\/HTV Silicone Rubber\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003cstrong\u003eSolid form\u003c\/strong\u003e: Unlike liquid silicones such as LSR (Liquid Silicone Rubber) or RTV (Room Temperature Vulcanizing).\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eCuring\u003c\/strong\u003e: Typically done with peroxides or platinum catalysts.\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eExcellent mechanical properties\u003c\/strong\u003e after curing.\u003c\/li\u003e\r\n\u003cli\u003e\u003cstrong\u003eHeat-resistant\u003c\/strong\u003e, chemically inert, and biocompatible.\u003c\/li\u003e\r\n\u003cli\u003eWidely used in \u003cstrong\u003emedical applications\u003c\/strong\u003e, \u003cstrong\u003eautomotive\u003c\/strong\u003e, \u003cstrong\u003efood processing\u003c\/strong\u003e, and \u003cstrong\u003eelectrical insulation\u003c\/strong\u003e.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003chr \/\u003e\r\n\u003ch3\u003eAlternative: LSR (Liquid Silicone Rubber)\u003c\/h3\u003e\r\n\u003cp\u003e\u003cstrong\u003eLSR silicone\u003c\/strong\u003e is a liquid material processed via injection molding. It is ideal for complex shapes and high-volume production. Compared to HCR\/HTV, LSR is better suited for fine details and precision parts.\u003c\/p\u003e","brand":"Semsil","offers":[{"title":"1 Kg, Semsil 16040 Shore A 40","offer_id":50272407912789,"sku":"S82004","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"1 Kg, Semsil 16060 Shore A 60","offer_id":50272407945557,"sku":"S82005","price":31.46,"currency_code":"EUR","in_stock":true},{"title":"1 Kg, Semsil 16080 Shore A 80","offer_id":50272407978325,"sku":"S82009","price":31.46,"currency_code":"EUR","in_stock":false},{"title":"10 Kg, Semsil 16040 Shore A 40","offer_id":50272408011093,"sku":"S82012","price":300.0,"currency_code":"EUR","in_stock":true},{"title":"10 Kg, Semsil 16060 Shore A 60","offer_id":50272408043861,"sku":"S82011","price":300.0,"currency_code":"EUR","in_stock":true},{"title":"10 Kg, Semsil 16080 Shore A 80","offer_id":50272408076629,"sku":"S82010","price":300.0,"currency_code":"EUR","in_stock":false},{"title":"Quotation for larger quantities","offer_id":50272408109397,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/semsil-htv-platinum-siliconen-49300553859413.png?v=1740075745"},{"product_id":"wacker-elastosil-m-4600-ab-rtv-2-siliconen","title":"Wacker Elastosil M 4600 A\/B – FDA-Approved Platinum Silicone for Food-Safe Molds \u0026 Potting","description":"\u003ch2\u003ePremium FDA-Approved Platinum RTV-2 Silicone for Professional Food-Safe Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Elastosil M 4600 A\/B\u003c\/strong\u003e is a high-quality platinum-catalyzed RTV-2 silicone rubber with FDA CFR 21 §177.2600 and BfR XV certification, specifically developed for food-safe applications and thermally stressed environments. This professional silicone combines very soft Shore A 20 hardness with extreme elongation (800%), excellent thermal stability (-40°C to +200°C), and minimal shrinkage (\u0026lt;0.1%), making it ideal for culinary molds, medical simulation, potting, and sealing. Easy 10:1 mixing ratio with 90 minutes pot life.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA \u0026amp; BfR certified:\u003c\/strong\u003e Meets FDA CFR 21 §177.2600 and BfR XV standards for direct food-safe contact according to EU Regulation 1935\/2004\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme thermal stability:\u003c\/strong\u003e Usable from -40°C to +200°C for oven, freezer, and high-temperature applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVery soft Shore A 20 hardness:\u003c\/strong\u003e Maximum flexibility with 800% elongation and \u0026gt;20 N\/mm tear strength for durable, flexible molds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum-cure technology:\u003c\/strong\u003e No odor, minimal shrinkage (\u0026lt;0.1%), superior mechanical properties, and long service life\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong pot life:\u003c\/strong\u003e 90 minutes working time at 23°C for careful processing of complex projects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional quality:\u003c\/strong\u003e Wacker Chemie quality for reliable, reproducible results in critical applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFood-safe molds for chocolate, confectionery, fondant, and culinary creations (FDA\/BfR compliant)\u003c\/li\u003e\n\u003cli\u003eMedical simulation and anatomical models where biocompatibility is required\u003c\/li\u003e\n\u003cli\u003ePotting and encapsulation for batteries (e-bikes, cars, drones) with thermal stability\u003c\/li\u003e\n\u003cli\u003eSealing and O-rings for the food processing industry and pharmaceutical applications\u003c\/li\u003e\n\u003cli\u003eRapid prototyping and molds for concrete, WetCast, and precast elements\u003c\/li\u003e\n\u003cli\u003eHorse hoof applications and veterinary applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eEnsure both components are at room temperature (20-25°C)\u003c\/li\u003e\n\u003cli\u003eMix Component A and B in a 10:1 ratio (by weight)\u003c\/li\u003e\n\u003cli\u003eOptional: place mixture in a vacuum chamber to remove air bubbles\u003c\/li\u003e\n\u003cli\u003ePour within the 90-minute pot life\u003c\/li\u003e\n\u003cli\u003eCure for 24 hours at room temperature for optimal properties\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eStorage:\u003c\/strong\u003e Store in original, sealed packaging in a cool, dry place. Shelf life: 12 months from production date.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for food-safe, medical, and industrial applications with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003eCertifications \u0026amp; Safety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFDA CFR 21 §177.2600 certified for food-safe contact\u003c\/li\u003e\n\u003cli\u003eBfR XV compliant (Bundesinstitut für Risikobewertung)\u003c\/li\u003e\n\u003cli\u003eComplies with EU Regulation 1935\/2004 for materials in contact with food\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on processing techniques, FDA compliance, temperature profiles, and optimal results for your specific food-safe or medical application. Contact us for technical datasheets, processing guidelines, or advice on certifications and regulations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore information:\u003c\/strong\u003e \u003ca rel=\"noopener\" href=\"https:\/\/www.wacker.com\/h\/de-nl\/siliconkautschuk\/raumtemperaturvernetzender-siliconkautschuk-rtv-2\/elastosil-m-4600-ab\/p\/000018448\" target=\"_blank\"\u003eWacker Elastosil M 4600 A\/B Product Page\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: This product is intended for professional use. Always read the technical documentation and safety information before using the product.\u003c\/em\u003e\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"5.5 Kg Set (5 Kg A + 0.5 Kg B)","offer_id":51576322392405,"sku":"S82070","price":342.82,"currency_code":"EUR","in_stock":true},{"title":"22 kg set (20 kg A + 2 kg B)","offer_id":51576322425173,"sku":"S82069","price":1304.97,"currency_code":"EUR","in_stock":true},{"title":"33 kg (30 kg A + 3 kg B)","offer_id":51576322457941,"sku":"S82071","price":1859.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-m-4600-ab-fda-goedgekeurd-platinum-silicone-52722852364629.jpg?v=1773846332"},{"product_id":"platina-siliconen-true-skin-30","title":"CHT True Skin 30 – Skin-Friendly Platinum Silicone for SFX \u0026 Prosthetics","description":"\u003ch2\u003ePremium Skin-Friendly Platinum Silicone for Professional SFX and Medical Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCHT True Skin 30\u003c\/strong\u003e is a 2-component, addition-curing (platinum-cure) liquid silicone elastomer with a Shore A 30 hardness, specially developed for skin replication, prosthetics, and special effects applications. This professional silicone combines extreme elasticity (1000%), translucent color for easy pigmentation, and FDA compliance (21CFR 177.2600) with a wide operating temperature range from -55°C to +204°C. Easy 1:1 mixing ratio, curing at room temperature or accelerated with heat.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme elasticity:\u003c\/strong\u003e 1000% elongation at break (ISO 37) for realistic skin movements and durable prosthetics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranslucent for perfect pigmentation:\u003c\/strong\u003e Transparent base for accurate skin tones and color mixing in SFX and bodycasting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA compliant:\u003c\/strong\u003e Meets 21CFR 177.2600 for indirect food-safe contact and skin-friendly applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide operating temperature:\u003c\/strong\u003e Stable from -55°C to +204°C for demanding industrial and medical environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal shrinkage:\u003c\/strong\u003e \u0026lt;0.1% linear shrinkage for dimensionally accurate molds and prosthetics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable cure speed:\u003c\/strong\u003e 20-minute pot life at 23°C, accelerated with heat for production efficiency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpecial effects (SFX) and animatronics: realistic skin textures for film, TV, and theater\u003c\/li\u003e\n\u003cli\u003eProsthetics and medical simulation: anatomically correct models and training phantoms\u003c\/li\u003e\n\u003cli\u003eBodycasting and skin replication for artists and medical applications\u003c\/li\u003e\n\u003cli\u003eMasks and cosplay materials with high detail fidelity\u003c\/li\u003e\n\u003cli\u003eRobotics and animatronics where flexible, skin-like covering is required\u003c\/li\u003e\n\u003cli\u003eCulinary molds and food-safe applications (FDA compliant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStir both components A and B thoroughly before use (filler settling)\u003c\/li\u003e\n\u003cli\u003eMix A and B in a 1:1 ratio by weight in a clean container (3x the volume)\u003c\/li\u003e\n\u003cli\u003eMix until color is uniform\u003c\/li\u003e\n\u003cli\u003ePreferably degas: 30-50 mbar intermittently, 5-10 minutes\u003c\/li\u003e\n\u003cli\u003ePour by gravity or pressure injection within the 20-minute pot life\u003c\/li\u003e\n\u003cli\u003eAllow to cure for 6-8 hours at 23°C, or accelerate with heat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eInhibition Warning:\u003c\/strong\u003e Curing can be inhibited by nitrogen, sulfur, phosphorus, arsenic, organotin catalysts, epoxy resin catalysts, condensation silicones, modeling clay, sulfur-cured rubbers, onion, and garlic. Use clean tools only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHT Germany\u003c\/strong\u003e is a leading specialist in high-quality silicone elastomers for SFX, medical simulation, prosthetics, and industrial applications.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on pigmentation, curing speeds, inhibition prevention, and optimal results for your specific SFX, prosthetic, or medical simulation application. Contact us for technical datasheets, safety data sheets, or advice on packaging options.\u003c\/p\u003e","brand":"CHT Germany","offers":[{"title":"Request a quote","offer_id":51607137288533,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Request a quote","offer_id":51608118231381,"sku":null,"price":300.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/cht-germany-cht-true-skin-20-huidvriendelijk-platinum-silicone-voor-52787142394197.jpg?v=1773918839"},{"product_id":"true-skin-20","title":"CHT True Skin 20 – Skin-Friendly Platinum Silicone for SFX \u0026 Prosthetics","description":"\u003ch2\u003ePremium Skin-Friendly Platinum Silicone for Professional SFX and Medical Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCHT True Skin 20\u003c\/strong\u003e is a 2-component, addition-curing (platinum-cure) liquid silicone elastomer with Shore A 20 hardness, specially developed for realistic skin replication, prosthetics, and special effects applications. This professional silicone combines extreme stretchability (1000%), translucent color for accurate pigmentation, and FDA compliance (21CFR 177.2600) with a wide operating temperature of -55°C to +204°C. Softer than True Skin 30, it is ideal for moving prosthetics and delicate skin textures. Easy 1:1 mixing ratio.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExceptionally soft Shore A 20 hardness:\u003c\/strong\u003e Maximum skin-like softness for moving prosthetics, appliances, and realistic skin textures\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme stretchability:\u003c\/strong\u003e 1000% elongation at break (ISO 37) for natural movement and durable SFX applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTranslucent for perfect pigmentation:\u003c\/strong\u003e Transparent base for accurate skin tones and color mixing with silicone-compatible pigments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFDA compliant:\u003c\/strong\u003e Meets 21CFR 177.2600 for indirect food-safe contact and skin-friendly applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide operating temperature:\u003c\/strong\u003e Stable from -55°C to +204°C for demanding industrial and medical environments\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimal shrinkage:\u003c\/strong\u003e \u0026lt;0.1% linear shrinkage for dimensionally accurate molds and prosthetics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSFX prosthetics and appliances for film, TV, and theater with maximum freedom of movement\u003c\/li\u003e\n\u003cli\u003eSkin replication and bodycasting for artists and medical applications\u003c\/li\u003e\n\u003cli\u003eAnimatronics and robotics where soft, skin-like covering is required\u003c\/li\u003e\n\u003cli\u003eMedical simulation and anatomical training models\u003c\/li\u003e\n\u003cli\u003eCosplay masks and character prosthetics with natural movement\u003c\/li\u003e\n\u003cli\u003ePodiatry applications and skin-contact products\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStir both components A and B thoroughly before use (settling of fillers)\u003c\/li\u003e\n\u003cli\u003eMix A and B in a 1:1 ratio by weight in a clean container (3x the volume)\u003c\/li\u003e\n\u003cli\u003eMix until color is uniform\u003c\/li\u003e\n\u003cli\u003ePreferably degas: 30-50 mbar intermittently, 5-10 minutes\u003c\/li\u003e\n\u003cli\u003ePour by gravity or pressure injection within the 20-minute pot life\u003c\/li\u003e\n\u003cli\u003eAllow to cure for 6-8 hours at 23°C, or accelerate with heat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eInhibition Warning:\u003c\/strong\u003e Curing can be inhibited by nitrogen, sulfur, phosphorus, arsenic, organotin catalysts, condensation silicones, modeling clay, sulfur-vulcanized rubbers, onion, and garlic. Use only clean tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCHT Germany\u003c\/strong\u003e is a leading specialist in high-quality silicone elastomers for SFX, medical simulation, prosthetics, and industrial applications, with decades of expertise in platinum-cure technology.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on pigmentation, curing speeds, inhibition prevention, and optimal results for your specific SFX, prosthetic, or medical simulation application. Contact us for technical datasheets, safety data sheets, or advice on packaging options and bulk orders.\u003c\/p\u003e","brand":"CHT Germany","offers":[{"title":"Request a quote","offer_id":51607642800469,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true},{"title":"Request a quote","offer_id":51608115020117,"sku":null,"price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/cht-germany-cht-true-skin-20-huidvriendelijk-platinum-silicone-voor-52787142394197.jpg?v=1773918839"},{"product_id":"catalyst-b-component-voor-transparant-15-40-normaal-of-snel","title":"Wacker ELASTOSIL® Cat. Vario – Curing Agent for Transparent Silicone Molds \u0026 Prototyping","description":"\u003ch2\u003ePremium Platinum-Cure Hardener for Professional Transparent Silicones\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Vario Catalyst B-component\u003c\/strong\u003e is the essential hardener (catalyst) for Wacker Elastosil Vario Transparent 15 and 40 platinum-cure silicones. Available in two cure speeds - Normal (6 hours) and Fast (15 minutes) - for optimal flexibility in processing time. This high-quality catalyst makes it possible to create translucent, food-safe molds with minimal shrinkage and excellent mechanical properties. \u003cstrong\u003ePlease note:\u003c\/strong\u003e This is ONLY the B-component (hardener) - the A-component must be purchased separately.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible cure speed:\u003c\/strong\u003e Choose between Normal (6-hour demolding time) for ample processing time or Fast (15 minutes) for rapid production.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlendable for intermediate speeds:\u003c\/strong\u003e Combine Normal and Fast catalysts for any desired cure time - see mixing ratio chart in datasheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with multiple Shore hardnesses:\u003c\/strong\u003e Works with both Vario 15 (Shore A 15) and Vario 40 (Shore A 40) A-components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatinum-cure quality:\u003c\/strong\u003e Minimal shrinkage (\u0026lt;0.1%), food-safe and skin-friendly according to FDA\/TÜV guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional results:\u003c\/strong\u003e Translucent molds with excellent detail reproduction and high tensile strength.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong shelf life:\u003c\/strong\u003e Minimum 1 year shelf life when stored correctly (5-25°C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRapid prototyping where visual inspection during mold cutting is essential\u003c\/li\u003e\n\u003cli\u003eFood-safe molds for chocolate, confectionery, fondant, and culinary creations\u003c\/li\u003e\n\u003cli\u003eSFX and prosthetics: skin-friendly molds for masks and special effects\u003c\/li\u003e\n\u003cli\u003ePodiatry and medical simulation for anatomical models\u003c\/li\u003e\n\u003cli\u003ePad printing stamps and flexible printing applications\u003c\/li\u003e\n\u003cli\u003eMolds for polyurethane, epoxy, polyester, and acrylic resins where transparency is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/siliconesandmore.com\/products\/wacker-elastosil-vario-15-catalyst-vario\" target=\"_blank\"\u003eWacker Elastosil Vario Transparent 15 (Shore A 15) Normal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/siliconesandmore.com\/products\/elastosil-vario-15-catalyst-vario-f\" target=\"_blank\"\u003eWacker Elastosil Vario Transparent 15 (Shore A 15) Fast\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/siliconesandmore.com\/products\/wacker-elastosil-vario-40-catalyst-vario-normaal\" target=\"_blank\"\u003eWacker Elastosil Vario Transparent 40 (Shore A 40) Normal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/siliconesandmore.com\/products\/wacker-elastosil-vario-40-catalyst-vario-snel\" target=\"_blank\"\u003eWacker Elastosil Vario Transparent 40 (Shore A 40) Fast\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMixing ratio: 10 parts A-component : 1 part B-component (by weight)\u003c\/li\u003e\n\u003cli\u003eEnsure A and B components are from the same batch number for optimal performance\u003c\/li\u003e\n\u003cli\u003eStore between 5-25°C in a closed container for a minimum of 1 year shelf life\u003c\/li\u003e\n\u003cli\u003eUse gloves and work in a well-ventilated area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCustomization Options:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv class=\"silicone-mengcalculator\" style=\"max-width: 100%; margin: 30px 0; padding: 20px; background: #f8f9fa; border: 3px solid #0a4a8a; border-radius: 12px; box-shadow: 0 4px 15px rgba(10,74,138,0.12); font-family: inherit;\"\u003e\n\u003cdiv style=\"display: flex; align-items: center; gap: 12px; margin-bottom: 16px; flex-wrap: wrap;\"\u003e\n\u003cdiv style=\"background: #0a4a8a; color: white; padding: 8px 16px; border-radius: 9999px; font-weight: bold; font-size: 1.05rem; white-space: nowrap;\"\u003e🧪 EL ASTOSIL VARIO MIX\u003c\/div\u003e\n\u003ch2 style=\"margin: 0; font-size: 1.55rem; color: #0a4a8a; flex: 1;\"\u003eMixing Calculator for Your Perfect Silicone\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003cp style=\"color: #333; line-height: 1.4; margin-bottom: 20px; max-width: 680px; font-size: 0.98rem;\"\u003eCalculate exactly how much \u003cstrong\u003eElastosil Vario 15\u003c\/strong\u003e, \u003cstrong\u003eVario 40\u003c\/strong\u003e, \u003cstrong\u003eCatalyst Vario F (fast)\u003c\/strong\u003e and \u003cstrong\u003eNormal\u003c\/strong\u003e you need.\u003cbr\u003e\u003csmall style=\"color: #e74c3c;\"\u003eAll values at 20 °C. Temperature has a significant influence!\u003c\/small\u003e\u003c\/p\u003e\n\u003c!-- Main Layout: 2 columns --\u003e\n\u003cdiv style=\"display: flex; gap: 20px; align-items: flex-start;\"\u003e\n\u003c!-- Column 1: 3 input cells stacked --\u003e\n\u003cdiv style=\"flex: 1; display: flex; flex-direction: column; gap: 12px;\"\u003e\n\u003c!-- CELL 1: Hardness --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e1. Desired Hardness (Shore A)\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n\u003cinput type=\"number\" id=\"shoreInput\" value=\"40\" min=\"15\" max=\"40\" step=\"0.1\" style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eShore A\u003c\/span\u003e\n\u003c\/div\u003e\n\u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003e15 = very soft • 40 = firm\u003c\/small\u003e\n\u003c\/div\u003e\n\u003c!-- CELL 2: Pot life --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e2. Desired Pot life\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\n\u003cinput type=\"number\" id=\"potlifeInput\" value=\"150\" min=\"3\" max=\"150\" step=\"1\" style=\"width: 110px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e \u003cspan style=\"font-size: 1.35rem; font-weight: bold; color: #0a4a8a;\"\u003eminutes\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- CELL 3: Total desired mix quantity (A + B) – curing time output removed --\u003e\n\u003cdiv style=\"background: white; padding: 18px; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.05);\"\u003e\n\u003ch3 style=\"margin: 0 0 12px 0; color: #0a4a8a; font-size: 1.25rem;\"\u003e3. Total Desired Mix Quantity (A + B in grams)\u003c\/h3\u003e\n\u003cdiv style=\"display: flex; align-items: center; justify-content: center; gap: 12px;\"\u003e\u003cinput type=\"number\" id=\"totalMix\" value=\"1100\" min=\"110\" step=\"50\" style=\"width: 220px; font-size: 2rem; font-weight: bold; text-align: center; padding: 10px; border: 3px solid #0a4a8a; border-radius: 12px;\"\u003e\u003c\/div\u003e\n\u003csmall style=\"display: block; text-align: center; margin-top: 8px; color: #666; font-size: 0.9rem;\"\u003eB-component = always 10 % of A-component\u003c\/small\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- Column 2: Your perfect mix (right) --\u003e\n\u003cdiv id=\"finalResult\" style=\"flex: 1; padding: 20px; background: #0a4a8a; color: white; border-radius: 10px; box-shadow: 0 2px 8px rgba(0,0,0,0.1); min-height: 100%; display: none;\"\u003e\n\u003ch3 style=\"color: white; margin: 0 0 14px 0; font-size: 1.5 rem;\"\u003e✅ Your Perfect Mix\u003c\/h3\u003e\n\u003cdiv id=\"finalContent\" style=\"display: flex; flex-direction: column; gap: 14px; font-size: 1.3rem;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- DISCLAIMER --\u003e\n\u003cdiv style=\"margin-top: 24px; padding: 14px 20px; background: #fff3cd; border: 1px solid #ffeaa7; border-radius: 8px; color: #856404; font-size: 1.1rem; line-height: 1.45; text-align: center;\"\u003e\n\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e This calculator is merely a tool and provides an estimate based on the graph from the manual. Actual pot life and cure time may vary due to temperature, mixing technique, humidity, or other factors. Siliconesandmore accepts no liability for divergent results. Always perform a small test mix first and consult the official manual.\u003c\/div\u003e\n\u003cdiv style=\"margin-top: 18px; text-align: center; font-size: 0.9rem; color: #555;\"\u003eTip: Buy the kits separately if you want to adjust both hardness and speed.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cscript\u003e\n  \/\/ ====================== DATA FROM GRAPH (Wacker TDS + your screenshot) ======================\n  \/\/ Values verified against the attached graph:\n  \/\/ Potlife (blue line): 155 → 60 → 38 → 18 → 8 min\n  \/\/ Curing time (red line): 6.0 → 3.0 → 1.8 → 1.0 → 0.25 hours\n  \/\/ 100% F = 15 min cure (0.25 hours) as per the graph. (Your earlier comment about 3 min is not found in the graph; we adhere to the official Wacker graph.)\n  const bMixData = [\n    { p: 0,   pot: 155, dem: 6.0 },\n    { p: 30,  pot:  60, dem: 3.0 },\n    { p: 50,  pot:  38, dem: 1.8 },\n    { p: 70,  pot:  18, dem: 1.0 },\n    { p: 100, pot:   8, dem: 0.25 }\n  ];\n\n  function getPercentFromTime(target, key) {\n    const data = bMixData;\n    if (target \u003e= data[0][key]) return 0;\n    if (target \u003c= data[data.length-1][key]) return 100;\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (target \u003c= data[i][key] \u0026\u0026 target \u003e= data[i+1][key]) {\n        const frac = (data[i][key] - target) \/ (data[i][key] - data[i+1][key]);\n        return data[i].p + frac * (data[i+1].p - data[i].p);\n      }\n    }\n    return 50;\n  }\n\n  function getTimeFromPercent(percent, key) {\n    const data = bMixData;\n    const p = Math.max(0, Math.min(100, percent));\n    for (let i = 0; i \u003c data.length - 1; i++) {\n      if (p \u003e= data[i].p \u0026\u0026 p \u003c= data[i+1].p) {\n        const frac = (p - data[i].p) \/ (data[i+1].p - data[i].p);\n        return data[i][key] + frac * (data[i+1][key] - data[i][key]);\n      }\n    }\n    return p \u003c= 0 ? data[0][key] : data[data.length-1][key];\n  }\n\n  function updateCalculator() {\n    const totalMix = parseFloat(document.getElementById('totalMix').value) || 1100;\n    const totalA = Math.round(totalMix \/ 1.1);\n    const totalB = Math.round(totalMix - totalA);\n\n    const shore = parseFloat(document.getElementById('shoreInput').value) || 15;\n\n    const frac40 = (shore - 15) \/ 25;\n    const a15 = Math.round((1 - frac40) * totalA);\n    const a40 = Math.round(frac40 * totalA);\n\n    const potTarget = parseFloat(document.getElementById('potlifeInput').value) || 15;\n    const percentFast = getPercentFromTime(potTarget, 'pot');\n    const calculatedDem = getTimeFromPercent(percentFast, 'dem');\n\n    const bFast = Math.round((percentFast \/ 100) * totalB);\n    const bNormal = totalB - bFast;\n\n    const finalHTML = `\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eA-component (total ${totalA} g)\u003c\/strong\u003e\u003cbr\u003e\n        Vario 15: \u003cstrong\u003e${a15} g\u003c\/strong\u003e\u003cbr\u003e\n        Vario 40: \u003cstrong\u003e${a40} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eB-component (total ${totalB} g)\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Vario F: \u003cstrong\u003e${bFast} g\u003c\/strong\u003e\u003cbr\u003e\n        Catalyst Normal: \u003cstrong\u003e${bNormal} g\u003c\/strong\u003e\n      \u003c\/div\u003e\n      \u003cdiv style=\"background: rgba(255,255,255,0.15); padding: 14px; border-radius: 8px;\"\u003e\n        \u003cstrong\u003eWorking Times\u003c\/strong\u003e\u003cbr\u003e\n        Pot life: \u003cstrong\u003e${potTarget.toFixed(0)} min\u003c\/strong\u003e\u003cbr\u003e\n        Cure time: \u003cstrong\u003e${calculatedDem.toFixed(2)} hours\u003c\/strong\u003e\n      \u003c\/div\u003e\n    `;\n    document.getElementById('finalContent').innerHTML = finalHTML;\n    document.getElementById('finalResult').style.display = 'block';\n  }\n\n  function copyMix() {\n    const final = document.getElementById('finalContent').innerText;\n    navigator.clipboard.writeText(final).then(() =\u003e {\n      const btn = document.querySelector('#finalResult button');\n      if (btn) {\n        const orig = btn.innerHTML;\n        btn.innerHTML = '✅ Copied!';\n        setTimeout(() =\u003e { btn.innerHTML = orig; }, 2000);\n      }\n    });\n  }\n\n  function initCalculator() {\n    const elements = ['shoreInput', 'potlifeInput', 'totalMix'];\n    elements.forEach(id =\u003e {\n      const el = document.getElementById(id);\n      if (el) {\n        el.addEventListener('input', updateCalculator);\n        el.addEventListener('change', updateCalculator);\n      }\n    });\n    updateCalculator();\n  }\n\n  if (document.readyState === 'loading') {\n    document.addEventListener('DOMContentLoaded', initCalculator);\n  } else {\n    initCalculator();\n  }\n\u003c\/script\u003e\n\u003cp\u003e\u003cstrong\u003eWacker Chemie\u003c\/strong\u003e is a global leader in silicone technologies for professional mold making, prototyping, and food-safe applications with over 100 years of expertise.\u003c\/p\u003e\n\u003ch3\u003eImportant Warning: Inhibition with Addition-Cure Silicones\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e This is an addition-cure silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether the products you are using (including gloves, spatulas, and cups) contain these ingredients, please perform a small test first. These substances can be found in many latex gloves, some plasticines, paints and glues, condensation-cure silicones, 1-component silicone sealants, natural rubbers, and 3D printing materials (especially stereolithography). If you wish to use these, you will need to apply a protective layer of polyvinyl alcohol (PVA).\u003c\/p\u003e\n\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eOur technical specialists advise on hardness mixing, cure speed, vacuum techniques, and optimal results for your specific mold, prototype, or stamp application. Contact us for technical datasheets, processing manuals, or advice on the VARIO system.\u003c\/p\u003e","brand":"Wacker","offers":[{"title":"Normal \/ 50 Gr.","offer_id":52092077277525,"sku":"S10175","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"Normal \/ 100 Gr.","offer_id":52092135276885,"sku":"S10177","price":7.5,"currency_code":"EUR","in_stock":true},{"title":"Normal \/ 500 Gr.","offer_id":52092135309653,"sku":"S10111","price":35.0,"currency_code":"EUR","in_stock":true},{"title":"Normal \/ 1 kg.","offer_id":52092135342421,"sku":"S11119","price":60.0,"currency_code":"EUR","in_stock":true},{"title":"Normal \/ 2 kg.","offer_id":52092135375189,"sku":"S10354","price":100.0,"currency_code":"EUR","in_stock":true},{"title":"Fast \/ 50 Gr.","offer_id":52092077310293,"sku":"S10180","price":5.0,"currency_code":"EUR","in_stock":true},{"title":"Fast \/ 100 Gr.","offer_id":52092135407957,"sku":"S10179","price":7.5,"currency_code":"EUR","in_stock":true},{"title":"Fast \/ 500 Gr.","offer_id":52092135440725,"sku":"S10181","price":35.0,"currency_code":"EUR","in_stock":true},{"title":"Fast \/ 1 kg.","offer_id":52092135473493,"sku":"S11138","price":60.0,"currency_code":"EUR","in_stock":true},{"title":"Fast \/ 2 kg.","offer_id":52092135506261,"sku":"S10573","price":100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/wacker-wacker-elastosil-cat-vario-verharder-voor-transparante-sil-48098062467413.jpg?v=1778659609"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/collections\/cake-of-peace_10253546-185a-4557-ba5d-e98999996a67.jpg?v=1765965616","url":"https:\/\/siliconesandmore.com\/en\/collections\/voedselveilige-siliconen-fda-goedgekeurde-siliconen-voor-culinaire-mallen-kopie.oembed","provider":"siliconesandmore","version":"1.0","type":"link"}