{"title":"Was \u0026 boetseren","description":"\u003ch2\u003eWas en boetseren: van eerste schets tot bronzen beeld\u003c\/h2\u003e\n\u003cp\u003eElk beeld, elke figuur en elke sieradenvorm begint met een model. In deze categorie vind je de materialen waarmee kunstenaars en hobbyisten dat model maken en vermenigvuldigen: \u003cstrong\u003eboetseermassa's om te modelleren, wassen om af te gieten en keramische-schaalmaterialen om zelf brons of ander metaal te gieten\u003c\/strong\u003e. Drie stappen die naadloos op elkaar aansluiten, van de eerste vorm in klei tot het uiteindelijke gietstuk in was, hars of metaal.\u003c\/p\u003e\n\n\u003ch3\u003eBoetseermassa: het model maken\u003c\/h3\u003e\n\u003cp\u003eEen goede boetseerklei moet precies doen wat jouw handen willen. Zachte, oliegebonden kleien zoals Chavant en Monster Clay drogen niet uit, laten zich eindeloos bijwerken en zijn na opwarmen zelfs te gieten. Ze zijn de standaard in de beeldhouwkunst, bij special effects en in de ontwerpstudio. Daarnaast vind je hier boetseerwas en zelfhardende massa's voor wie een model wil maken dat na afloop stevig genoeg is om direct af te vormen. Op elke productpagina staat de hardheid, of de klei zwavelvrij is (belangrijk als je er een platinum siliconen mal van wilt maken) en bij welke temperatuur hij soepel wordt.\u003c\/p\u003e\n\n\u003ch3\u003eWassen: afgieten en reproduceren\u003c\/h3\u003e\n\u003cp\u003eMet \u003cstrong\u003egietwas\u003c\/strong\u003e maak je van een siliconen mal zoveel afgietsels als je wilt. Kunstenaarswassen (ongevulde wassen) zijn soepel en detailrijk; precisiewassen en gevulde wassen krimpen minder en zijn maatvaster, wat telt bij sieraden, tandtechniek en modelbouw. Wasafgietsels zijn op zichzelf al een eindproduct, maar ze zijn vooral de schakel naar metaal: een wasmodel is het uitgangspunt van de verloren-wasmethode. Ook was voor kaarsen en kleurstoffen voor was vind je in deze groep.\u003c\/p\u003e\n\n\u003ch3\u003eKeramische schaal: zelf brons gieten\u003c\/h3\u003e\n\u003cp\u003eWie zijn wasmodel in brons, aluminium of zilver wil zien, zet de volgende stap met \u003cstrong\u003ekeramische-schaalmaterialen voor de verloren-wasmethode\u003c\/strong\u003e (lost wax casting). Het wasmodel wordt laag voor laag gedompeld in een slurry van bindmiddel en keramisch poeder en bestrooid met stuc. Na het uitsmelten van de was blijft een hittebestendige schaal over waarin het metaal wordt gegoten. Je vindt hier de bindmiddelen, poeders, stucmaterialen en hulpstoffen om die schaal op te bouwen, van een enkel beeld in het atelier tot kleine series in de gieterij.\u003c\/p\u003e\n\n\u003ch3\u003eWelke combinatie past bij jou?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeeldhouwen en modelleren:\u003c\/strong\u003e oliegebonden boetseerklei, eventueel gevolgd door een siliconen mal uit onze \u003ca href=\"\/en\/collections\/siliconen-gietrubber\"\u003esiliconencategorie\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReproduceren in was:\u003c\/strong\u003e een siliconen mal plus kunstenaars- of precisiewas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZelf metaal gieten:\u003c\/strong\u003e wasmodel, keramische schaal en een oven om de was uit te smelten.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTwijfel je welke klei of was bij jouw project past? Ons team werkt zelf met deze materialen en helpt je graag met een eerlijk advies.\u003c\/p\u003e","products":[{"product_id":"monster-clay","title":"Monster Clay Brown – Reusable Sulphur-Free Modelling Clay for Sculpting \u0026 Special Effects","description":"\u003ch2\u003eReusable, sulphur-free modelling clay for sculpting and special effects\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMonster Clay® Premium Grade brown\u003c\/strong\u003e is a reusable, sulphur-free, oil-based modelling clay from The Monster Makers. The clay does not dry out, does not stick to skin or tools and has high elasticity, so you can also create unusual shapes. Monster Clay melts at 57.2 °C, so you can also melt and cast it. Up to 46 °C it remains comfortably kneadable. You can choose from Soft, Medium and Hard, in a 2.05 kg (4.5 lbs) oven-safe container.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSulphur-free:\u003c\/strong\u003e compatible with silicone, so suitable for mould making.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not dry out:\u003c\/strong\u003e reuse the clay as often as you like.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow melting point:\u003c\/strong\u003e melts at 57.2 °C, so you can also cast the clay.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not stick:\u003c\/strong\u003e to skin or tools.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh elasticity:\u003c\/strong\u003e for unusual and detailed shapes.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpting and modelling\u003c\/li\u003e\u003cli\u003e✓ Special effects, masks and props\u003c\/li\u003e\u003cli\u003e✓ Master models for moulding with silicone\u003c\/li\u003e\u003cli\u003e✓ Casting the clay in moulds of silicone, alginate or polyurethane\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWarm the clay slightly to soften it, preferably in a bain-marie or in the oven. Up to 46 °C it remains comfortably kneadable.\u003c\/li\u003e\u003cli\u003eModel with your hands or with tools.\u003c\/li\u003e\u003cli\u003eRefine details by warming areas locally, for example with a hair dryer or heat lamp. At room temperature the original hardness returns.\u003c\/li\u003e\u003cli\u003eFor a smooth finish, use alcohol, citrus solvent or turpentine.\u003c\/li\u003e\u003cli\u003eTo cast, melt the clay (melting temperature 57.2 °C) and pour it into a mould of silicone, alginate or polyurethane.\u003c\/li\u003e\u003cli\u003eLet the clay cool and reuse it as often as needed.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Do not use a microwave. The clay melts from the inside, so you do not see the molten clay straight away. This can cause serious burns and a fire hazard.\u003c\/li\u003e\u003cli\u003e✓ Never melt the clay in a pan on a direct heat source such as a gas hob, open fire or induction hob. Use a bain-marie or the oven.\u003c\/li\u003e\u003cli\u003e✓ Do not place the container directly on an oven rack or baking tray, but for example on a silicone baking mat. The container is oven-safe up to 120 °C.\u003c\/li\u003e\u003cli\u003e✓ Not suitable for consumption. Keep the clay out of the reach of children and wash your hands with soap and water after use.\u003c\/li\u003e\u003cli\u003e✓ Store the clay in a closed container in a cool, dry, frost-free place. It then keeps for at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which hardness best suits your project? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"The Monster Makers","offers":[{"title":"Brown Soft 4.5 Lbs \/ 2.05 Kg","offer_id":49489537794389,"sku":"A10374","price":44.95,"currency_code":"EUR","in_stock":false},{"title":"Brown Medium 4.5 Lbs \/ 2,05 Kg","offer_id":49489537827157,"sku":"A10375","price":44.95,"currency_code":"EUR","in_stock":false},{"title":"Brown Hard 4.5 Lbs \/ 2,05 Kg","offer_id":49489537859925,"sku":"A10376","price":44.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/the-monster-makers-monster-clay-bruin-48037917393237.jpg?v=1727352228"},{"product_id":"wax-ontluchtingskanalen","title":"IPCS Wax Vent Rods – Flexible Wax Sprues for Gating \u0026 Venting in Lost Wax Casting","description":"\u003ch2\u003eFlexible wax rods for gating and venting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWax Vent Rods\u003c\/strong\u003e are 60 cm rods made of a soft but firm red wax. You bend them into shape at room temperature without breaking or cracking and use them as vents, gates or sprues in the lost wax process. The rods are available round and square, hollow and solid, in various diameters.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eEasy to bend:\u003c\/strong\u003e bends at room temperature without breaking or cracking.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e does not sag.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBurns out completely:\u003c\/strong\u003e the bronze foundry burns the rods out completely.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMany sizes:\u003c\/strong\u003e round solid from 6.35 to 19.05 mm, round hollow 18.8 and 25 mm, square hollow 14.1 and 37.5 mm.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Vents on wax patterns\u003c\/li\u003e\u003cli\u003e✓ Gates and sprues\u003c\/li\u003e\u003cli\u003e✓ Gating systems for the bronze foundry\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eCut the rods to the required length with a (putty) knife.\u003c\/li\u003e\u003cli\u003eBend the rod into shape, preferably at room temperature (15 to 30 °C).\u003c\/li\u003e\u003cli\u003eAttach the rod to your pattern by carefully melting the end and letting it set on the pattern.\u003c\/li\u003e\u003cli\u003eYou can also bond the rod with sticky wax or superglue.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Below 15 °C the wax may break when bent.\u003c\/li\u003e\u003cli\u003e✓ The rods are sometimes bent for transport. Straighten them again at room temperature.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not inhale the fumes.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 3 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which diameter you need for your gating system? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"IPCS, International Precision Casting Supplies Ltd","offers":[{"title":"10 Wax cords of 6.35 mm. Round Solid.","offer_id":49489538220373,"sku":"A11746","price":4.29,"currency_code":"EUR","in_stock":true},{"title":"1 box Wax cords of 6.35 mm. Round Solid. (+\/- 500 Pieces)","offer_id":49489538253141,"sku":"A11746","price":215.04,"currency_code":"EUR","in_stock":true},{"title":"10 pieces Wax cords 9.53 mm. Round Solid","offer_id":49489538285909,"sku":"A11739","price":7.28,"currency_code":"EUR","in_stock":false},{"title":"10 pieces Wax cords 9.53 mm. Round Solid (+\/- 290 Pieces)","offer_id":49489538318677,"sku":"A11739","price":197.25,"currency_code":"EUR","in_stock":false},{"title":"10 Wax cords of 12.7 mm. Round Solid","offer_id":49489538384213,"sku":"A11736","price":20.0,"currency_code":"EUR","in_stock":true},{"title":"1 box Wax cords of 12.7 mm. Round Solid(+\/- 155 pieces)","offer_id":49489538416981,"sku":"A11736","price":253.0,"currency_code":"EUR","in_stock":true},{"title":"5 Wax cords of 19.05 mm. Round Solid","offer_id":49489538449749,"sku":"A11730","price":13.64,"currency_code":"EUR","in_stock":true},{"title":"1 box Wax cords of 19.05 mm. Round Solid   (+\/- 65 pieces)","offer_id":49489538482517,"sku":"A11730","price":224.0,"currency_code":"EUR","in_stock":true},{"title":"10 pieces of 18.8 mm. Round Cored. (art. 125RC)","offer_id":49489538515285,"sku":"A10070","price":19.25,"currency_code":"EUR","in_stock":true},{"title":"5 pieces of 25 mm. 1\"Round Cored. (art. 131RC)","offer_id":49489538548053,"sku":"A10074","price":14.5,"currency_code":"EUR","in_stock":false},{"title":"5 pieces of 14.1 mm. Square Solid. (art. 217SC)","offer_id":49489538580821,"sku":"A10083","price":7.5,"currency_code":"EUR","in_stock":true},{"title":"2 pieces of 37.5 mm. Square Solid. (art. 236SC)","offer_id":49489538613589,"sku":"A10090","price":18.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/ipcs-international-precision-casting-supplies-ltd-wax-ontluchtingskan-48037918015829.jpg?v=1727352276"},{"product_id":"monster-clay-groen","title":"Monster Clay Green – Reusable Sulphur-Free Modelling Clay for Sculpting \u0026 Special Effects","description":"\u003ch2\u003eReusable, sulphur-free modelling clay for sculpting and special effects\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMonster Clay® Premium Grade green\u003c\/strong\u003e is a reusable, sulphur-free, oil-based modelling clay from The Monster Makers. The clay does not dry out, does not stick to skin or tools and has high elasticity, so you can also create unusual shapes. Monster Clay melts at 57.2 °C, so you can also melt and cast it. Up to 46 °C it remains comfortably kneadable. You can choose from Soft, Medium and Hard, in a 2.05 kg (4.5 lbs) oven-safe container.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSulphur-free:\u003c\/strong\u003e compatible with silicone, so suitable for mould making.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not dry out:\u003c\/strong\u003e reuse the clay as often as you like.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow melting point:\u003c\/strong\u003e melts at 57.2 °C, so you can also cast the clay.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not stick:\u003c\/strong\u003e to skin or tools.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh elasticity:\u003c\/strong\u003e for unusual and detailed shapes.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpting and modelling\u003c\/li\u003e\u003cli\u003e✓ Special effects, masks and props\u003c\/li\u003e\u003cli\u003e✓ Master models for moulding with silicone\u003c\/li\u003e\u003cli\u003e✓ Casting the clay in moulds of silicone, alginate or polyurethane\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWarm the clay slightly to soften it, preferably in a bain-marie or in the oven. Up to 46 °C it remains comfortably kneadable.\u003c\/li\u003e\u003cli\u003eModel with your hands or with tools.\u003c\/li\u003e\u003cli\u003eRefine details by warming areas locally, for example with a hair dryer or heat lamp. At room temperature the original hardness returns.\u003c\/li\u003e\u003cli\u003eFor a smooth finish, use alcohol, citrus solvent or turpentine.\u003c\/li\u003e\u003cli\u003eTo cast, melt the clay (melting temperature 57.2 °C) and pour it into a mould of silicone, alginate or polyurethane.\u003c\/li\u003e\u003cli\u003eLet the clay cool and reuse it as often as needed.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Do not use a microwave. The clay melts from the inside, so you do not see the molten clay straight away. This can cause serious burns and a fire hazard.\u003c\/li\u003e\u003cli\u003e✓ Never melt the clay in a pan on a direct heat source such as a gas hob, open fire or induction hob. Use a bain-marie or the oven.\u003c\/li\u003e\u003cli\u003e✓ Do not place the container directly on an oven rack or baking tray, but for example on a silicone baking mat. The container is oven-safe up to 120 °C.\u003c\/li\u003e\u003cli\u003e✓ Not suitable for consumption. Keep the clay out of the reach of children and wash your hands with soap and water after use.\u003c\/li\u003e\u003cli\u003e✓ Store the clay in a closed container in a cool, dry, frost-free place. It then keeps for at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which hardness best suits your project? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"The Monster Makers","offers":[{"title":"Green Soft 4.5 Lbs \/ 2.05 Kg","offer_id":49531856159061,"sku":"A12042","price":44.95,"currency_code":"EUR","in_stock":true},{"title":"Green Medium 4.5 Lbs \/ 2,05 Kg","offer_id":49531856191829,"sku":"A12043","price":44.95,"currency_code":"EUR","in_stock":true},{"title":"Green Hard 4.5 Lbs \/ 2,05 Kg","offer_id":49531856257365,"sku":"A12044","price":44.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/the-monster-makers-monster-clay-groen-48098032222549.jpg?v=1727352435"},{"product_id":"diy-starterkit-easy-slurry-en-bezanding","title":"Starter kit DIY Easy slurry and sanding","description":"\u003ch3\u003eDIY Easy Slurry\u003c\/h3\u003e\r\n\u003cp\u003eThis set contains all the ingredients to make 30 liters of slurry for the ceramic bowl method yourself.\u003c\/p\u003e\r\n\u003cp\u003eThis slurry does not need to be stirred continuously, but only once a week or every 2 weeks and before use.\u003c\/p\u003e\r\n\u003cp\u003eThis set gives you more control over the ceramic bowl slurry than the JusDip, because you can easily vary the recipe yourself.\u003c\/p\u003e\r\n\u003cp\u003eThe separate ingredients (not mixed) also have a much longer shelf life than ready-made slurries.\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003eThe starter kit contains:\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e\u003ca href=\"https:\/\/www.siliconesandmore.com\/en\/products\/adbond-advantage?id=218798028\"\u003e1 x 25kg. Jerry can Adbond Advantage\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e1 X 25 Kg Fused silica flour 325 mesh\u003c\/li\u003e\r\n\u003cli\u003e1 X pouch of Shellspen powder (suspension powder)\u003c\/li\u003e\r\n\u003cli\u003e1 X bottle drying indicator\u003c\/li\u003e\r\n\u003cli\u003e1 X 25 kg Aluminum silicate sand fine grain (0.2-0.5 mm)\u003c\/li\u003e\r\n\u003cli\u003e1 x 25 kg Aluminum silicate sand coarser grain (0.5-1.0 mm)\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003eAdvantages\u003c\/h3\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eNo rotating slurry tank required - immerse the model directly into a container\u003c\/li\u003e\r\n\u003cli\u003eDo not stir continuously - Stir only before use.\u003c\/li\u003e\r\n\u003cli\u003eMinimal waste - Reclose the container when not in use and store it in a suitable place.\u003c\/li\u003e\r\n\u003cli\u003eExcellent to adapt to your own wishes\u003c\/li\u003e\r\n\u003cli\u003eCan be used as both primary and backup (possibly diluted with demineralized water)\u003c\/li\u003e\r\n\u003cli\u003eExcellent shelf life of the slurry, especially of the unmixed components (more than 3 years)\u003c\/li\u003e\r\n\u003cli\u003eIncludes shell dryness indicator\u003c\/li\u003e\r\n\u003cli\u003ePerforms perfectly under less than ideal environmental and processing conditions\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003ch3\u003eAluminum silicate\u003c\/h3\u003e\r\n\u003cp\u003eAluminum silicate is a good choice for the plastic caster. This product is extracted in Europe and is therefore cheaper and more environmentally friendly. The scales are strong and display the details of your artwork down to the micrometer. Aluminum silicate shell has excellent refractoriness and high temperature stability, with an advantageous ratio.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIncreased heat strength\u003c\/li\u003e\r\n\u003cli\u003eRobust and resilient\u003c\/li\u003e\r\n\u003cli\u003eEasy knockout\u003c\/li\u003e\r\n\u003cli\u003eIncreased strength compared to Fused Silica systems\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"EN- Safety data sheet Remasol Jus-Dip English.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN- Safety data sheet Remasol Jus-Dip English.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"Manual Shellspen with Adbond.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/Manual\/Manual Shellspen with Adbond.pdf\"\u003eManual Shellspen with Adbond.pdf\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca title=\"EN- Safety data sheet Remasol Jus-Dip English.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN- Safety data sheet Remasol Jus-Dip English.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/a\u003e\u003ca title=\"Manual - ceramic shell English V3.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/Manual\/Manual - ceramic shell English V3.pdf\"\u003eManual - ceramic shell English V3.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Nedform","offers":[{"title":"Recieve a quotation","offer_id":49531856781653,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/nedform-starterkit-diy-easy-slurry-en-bezanding-48098032451925.png?v=1727352436"},{"product_id":"gietwas-art-groen","title":"IPCS SculptaCast Earth (Casting Wax Art Green) – Sculpture Wax for Brushing, Slush Casting \u0026 Backup","description":"\u003ch2\u003eGreen sculpture wax for brushing, slush casting and backup\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSculptaCast Earth\u003c\/strong\u003e, also known with us as Casting Wax Art Green, is a green sculpture wax for the lost wax process. You can brush and slush the wax, and it has enough body to serve as a backup wax: one wax for the whole pattern. The formulation reduces bulging and lifting from the mould wall without the need to paint edges. The wax is based on petroleum and natural raw materials, has a melting point of 57.8 °C, contains no filler and leaves a maximum of 0.006 % ash.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLess lifting from the mould wall:\u003c\/strong\u003e less curling and lifting, so the wax pattern stays closer to the original and needs less finishing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOne wax:\u003c\/strong\u003e brushing, slushing and backup with the same product.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBetter dewaxing:\u003c\/strong\u003e greatly improved dewax properties.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasy to shape by hand:\u003c\/strong\u003e easy to touch up and repair.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eClean:\u003c\/strong\u003e unfilled and a maximum of 0.006 % ash.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Brushing detail into a mould\u003c\/li\u003e\u003cli\u003e✓ Slush casting hollow wax patterns\u003c\/li\u003e\u003cli\u003e✓ Backup wax behind a brushed layer\u003c\/li\u003e\u003cli\u003e✓ Wax patterns for the bronze foundry\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax carefully and do not heat it above 100 °C.\u003c\/li\u003e\u003cli\u003eBrush the first layer into the mould for the detail.\u003c\/li\u003e\u003cli\u003eBuild up the wall thickness by slushing, or use the same wax as backup.\u003c\/li\u003e\u003cli\u003eLet the wax cool and demould the pattern.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Do not heat the wax above 100 °C and do not keep it at high temperature for long. Otherwise the product degrades thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not inhale the fumes.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which sculpture wax best suits your pattern and casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"IPCS, International Precision Casting Supplies Ltd","offers":[{"title":"Casting wax Art Green, 1 kg","offer_id":49531863466325,"sku":"S11345","price":15.35,"currency_code":"EUR","in_stock":true},{"title":"Casting wax Art Green, 3 Kg Bucket","offer_id":49531863499093,"sku":"S11346","price":45.63,"currency_code":"EUR","in_stock":true},{"title":"Casting wax Art Green, 20 kg.","offer_id":49531863531861,"sku":"A11754","price":289.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/ipcs-international-precision-casting-supplies-ltd-sculptacast-earth-48098036941141.jpg?v=1732266034"},{"product_id":"limerick-green-slush-casting-wax","title":"IPCS Limerick Green Slush Casting Wax – Casting Wax for Slush Casting, Brushing \u0026 Lost Wax Casting","description":"\u003ch2\u003eGreen casting wax for slush casting, brushing and backup\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eLimerick Green Slush Casting Wax\u003c\/strong\u003e is a green casting wax in pastilles for the lost wax process. You pour or slush the wax into a mould, or brush it in for the first layer of detail. The wax has a melting point of 76 °C, shrinks very little and picks up fine detail. Less than 0.006 % ash remains after burnout, so the bronze foundry can burn out the wax pattern completely.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLow shrinkage:\u003c\/strong\u003e the pattern keeps its shape during demoulding.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e picks up fine details from the mould.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOne wax for brushing and backup:\u003c\/strong\u003e thin enough to brush and firm enough to use as a backup wax.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e does not sag in summer, is not grainy and does not stick.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e easy to measure out.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash:\u003c\/strong\u003e less than 0.006 % ash after burnout.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Slush casting hollow wax patterns for the bronze foundry\u003c\/li\u003e\u003cli\u003e✓ Brushing detail into a mould, with the same wax as backup\u003c\/li\u003e\u003cli\u003e✓ Casting wax patterns for the lost wax process\u003c\/li\u003e\u003cli\u003e✓ Finishing the cast wax pattern with modelling tools\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax and keep it at the working temperature of 70 to 76 °C.\u003c\/li\u003e\u003cli\u003eSlush casting: pour the wax into the open mould, let it set briefly and pour out the wax that is still liquid. A thin wax shell remains.\u003c\/li\u003e\u003cli\u003eRepeat until you reach the required wall thickness.\u003c\/li\u003e\u003cli\u003eBrushing: brush the wax into the mould at melting temperature, then build up a backup at about the same temperature by slushing.\u003c\/li\u003e\u003cli\u003eFinish the demoulded wax pattern with tools if needed.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change its properties.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not inhale the fumes.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your mould and casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"IPCS, International Precision Casting Supplies Ltd","offers":[{"title":"1 kg","offer_id":49531863859541,"sku":"S11387","price":12.37,"currency_code":"EUR","in_stock":true},{"title":"3 kg","offer_id":49531863892309,"sku":"S11334","price":37.34,"currency_code":"EUR","in_stock":true},{"title":"20 kg","offer_id":49531863925077,"sku":"A11760","price":230.32,"currency_code":"EUR","in_stock":true}]},{"product_id":"chavant-le-beau-touche-hm-906-gram","title":"Chavant Le Beau Touché HM (HTR) – Firm Sulphur-Free Plasteline for Warm Studios \u0026 Sculpting","description":"\u003ch2\u003eFirmer sulphur-free plasteline for warm studios\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChavant Le Beau Touché HM\u003c\/strong\u003e is the firmer version of Le Beau Touché, which Chavant itself calls HTR. This sulphur-free, non-drying plasteline has a hardness of Shore 27A and only softens at approx. 46 °C. Chavant recommends it for working environments warmer than 32 °C. The clay is smooth and flexible, with the same high tack as the Original. You receive a 0.907 kg (2 lb) block, individually wrapped in plastic.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFor warm studios:\u003c\/strong\u003e less sensitive to heat than the Original, recommended above 32 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFirmer:\u003c\/strong\u003e Shore 27A, for work that needs to hold its shape better.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSulphur-free:\u003c\/strong\u003e silicone friendly according to Chavant, so suitable for models you mould with silicone rubber.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh tack:\u003c\/strong\u003e layers of clay bond well to each other and to your work.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not dry out:\u003c\/strong\u003e the clay stays workable and is reusable.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpting in warm studios or under lamps\u003c\/li\u003e\u003cli\u003e✓ Figurative work, portraits and fine art\u003c\/li\u003e\u003cli\u003e✓ Models and master models for moulding with silicone rubber\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eFor figurative work, build an armature first. Le Beau Touché HM is not self-supporting.\u003c\/li\u003e\u003cli\u003eSculpt with traditional wooden or metal clay tools.\u003c\/li\u003e\u003cli\u003eSmooth the surface with rakes, spreaders and hand pressure. Naphtha, clear mineral spirits or 99 % isopropyl alcohol help with smoothing.\u003c\/li\u003e\u003cli\u003eClean tools and surfaces with naphtha or 99 % isopropyl alcohol.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Citrus-based solvents such as D-limonene can inhibit the cure of silicone rubber. Do not use them on clay you intend to mould.\u003c\/li\u003e\u003cli\u003e✓ Le Beau Touché HM is sulphur-free. With addition-cure (platinum) silicones, always do a small test first anyway.\u003c\/li\u003e\u003cli\u003e✓ If you want a softer, tackier clay at normal room temperature, choose \u003ca href=\"\/en\/products\/chavant-le-beau-touche\"\u003eLe Beau Touché Original\u003c\/a\u003e.\u003c\/li\u003e\u003cli\u003e✓ Do not overheat the clay: overheated clay can cause serious burns.\u003c\/li\u003e\u003cli\u003e✓ Unopened, at room temperature and away from sunlight or UV, the shelf life is 2 years. Store an opened block airtight or fully wrapped in plastic.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eTorn between the HM and the Original version, or looking for another Chavant clay? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Chavant","offers":[{"title":"HM (High Melt) - Red-Brown","offer_id":49531869364565,"sku":"A10609","price":17.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/chavant-chavant-le-beau-touche-hm-906-gram-48098044707157.jpg?v=1727353138"},{"product_id":"plakwas-copy","title":"Patch wax Red","description":"\u003cp\u003eStickwax has been designed specifically as a \"sticky wax\" for use in the assembly of wax sprue\/ pattern trees in the art casting industry. This material imparts exceptionally high adhesive and cohesive strength tot the sprue\/pattern joint.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003eThis product is intended for the business market. For larger quantities or customized products, you can contact us via info@siliconesandmore.com.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eSoftening point: 71°C (IP. 58)\u003cbr \/\u003ePenetration at 25°C: 18 dmm (ASTM D1321)\u003cbr \/\u003eAsh content: 0.03% w\/w (DCF.2)\u003cbr \/\u003eColour: naturel (DCF.4)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAvoid overheating the wax (140°C max.) or holding it at elevated temperatures for long periods. Doing so will thermally degrade the product. Avoid skin contact with the molten material and avoid inhaling fumes from it. See the relevant Material Safety Data Sheet for more information.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis material is normally applied in the liquid phase to both sections to be assembled. The parts are then quickly and carefully brought together and the bond allowed to cool.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/MSDS\/EN\/MSDS%20- Litefill B559 Blue English.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"EN - Product Information Stick wax.docx\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Stick wax.docx\" target=\"_blank\" rel=\"noopener\"\u003eEN - Product Information Stick wax.docx\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/MSDS\/EN\/MSDS%20- Litefill B559 Blue English.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"EN - Safety data sheet Stick Wax.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - Safety data sheet Stick Wax.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEN - Safety data sheet Stick Wax.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Remet","offers":[{"title":"25 kg.","offer_id":49531869462869,"sku":"A10328","price":300.38,"currency_code":"EUR","in_stock":true}]},{"product_id":"gietwas-b89-gevuld","title":"Remet Casting Wax B89 Hyfill – Filled Precision Wax for Small \u0026 Medium-Sized Patterns","description":"\u003ch2\u003eFilled pattern wax for small and medium-sized patterns\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Casting Wax B89 Hyfill\u003c\/strong\u003e is a filled pattern wax for investment casting. The wax contains 37.5% filler and is intended for small to medium-sized patterns in demanding applications such as aerospace. The melting point is 71 °C, the congealing point 66 °C and the ash content after burnout a maximum of 0.05%.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFilled wax:\u003c\/strong\u003e 37.5% filler for dimensionally stable patterns.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e a maximum of 0.05% after burnout.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHard at room temperature:\u003c\/strong\u003e penetration 3 dmm at 25 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFlows well when molten:\u003c\/strong\u003e viscosity 950 cSt at 99 °C.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Pattern wax for investment casting\u003c\/li\u003e\u003cli\u003e✓ Small and medium-sized patterns\u003c\/li\u003e\u003cli\u003e✓ Demanding applications such as aerospace\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax evenly and do not heat it above 100 °C.\u003c\/li\u003e\u003cli\u003eDo not keep the wax at high temperature for longer than necessary.\u003c\/li\u003e\u003cli\u003eProcess the wax into patterns according to your own process.\u003c\/li\u003e\u003cli\u003eLet the patterns cool completely before assembling them.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003cli\u003e✓ Never heat the wax above 100 °C and do not hold it at high temperature for long periods. Otherwise the product will degrade thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in the fumes.\u003c\/li\u003e\u003cli\u003e✓ Store the wax dry, cool and sealed.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your patterns and casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"25 kg.","offer_id":49531869954389,"sku":"A10475","price":246.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-gietwas-b89-gevuld-48098044772693.jpg?v=1727353138"},{"product_id":"repareer-wax-copy","title":"Utility wax White","description":"\u003cp\u003eStickwax has been designed specifically as a \"sticky wax\" for use in the assembly of wax sprue\/ pattern trees in the art casting industry. This material imparts exceptionally high adhesive and cohesive strength tot the sprue\/pattern joint.\u003c\/p\u003e\r\n\u003cp\u003e\u003cem\u003eThis product is intended for the business market. For larger quantities or customized products, you can contact us via info@siliconesandmore.com.\u003c\/em\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eTechnical data\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eSoftening point: 71°C (IP. 58)\u003cbr \/\u003ePenetration at 25°C: 18 dmm (ASTM D1321)\u003cbr \/\u003eAsh content: 0.03% w\/w (DCF.2)\u003cbr \/\u003eColour: naturel (DCF.4)\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eImportant\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAvoid overheating the wax (140°C max.) or holding it at elevated temperatures for long periods. Doing so will thermally degrade the product. Avoid skin contact with the molten material and avoid inhaling fumes from it. See the relevant Material Safety Data Sheet for more information.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eThis material is normally applied in the liquid phase to both sections to be assembled. The parts are then quickly and carefully brought together and the bond allowed to cool.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/MSDS\/EN\/MSDS%20- Litefill B559 Blue English.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"EN - Product Information Stick wax.docx\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN - Product Information Stick wax.docx\" target=\"_blank\" rel=\"noopener\"\u003eEN - Product Information Stick wax.docx\u003c\/a\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003ca href=\"https:\/\/docs.nedform.com\/MSDS\/EN\/MSDS%20- Litefill B559 Blue English.pdf\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" alt=\"\" width=\"50\" height=\"50\" \/\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca title=\"EN - Safety data sheet Stick Wax.pdf\" href=\"https:\/\/docs.nedform.com\/DOC\/EN\/SDS\/EN - Safety data sheet Stick Wax.pdf\" target=\"_blank\" rel=\"noopener\"\u003eEN - Safety data sheet Stick Wax.pdf\u003c\/a\u003e\u003c\/p\u003e","brand":"Remet","offers":[{"title":"25 kg.","offer_id":49531872248149,"sku":"A10328","price":300.33,"currency_code":"EUR","in_stock":true}]},{"product_id":"burst-rsd-100","title":"Remet Burst 100 Antifoam – Fast Defoamer for Ceramic Shell Slurries \u0026 Binders","description":"\u003ch2\u003eFast defoamer for ceramic shell slurries\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eBurst 100 Antifoam\u003c\/strong\u003e is a non-ionic silicone defoamer for ceramic shell slurries. It breaks down foam quickly and lets trapped air bubbles escape fast. Burst 100 is compatible with many wetting agents and works in both alkaline and acidic binder systems. Before use, you dilute it 1 to 9 with deionised or distilled water. For longer-term foam control, you can combine Burst 100 with Remet's Foamaway.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFast foam breakdown:\u003c\/strong\u003e air bubbles escape from the slurry quickly.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAcidic and alkaline:\u003c\/strong\u003e works in both types of binder system.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBroadly compatible:\u003c\/strong\u003e with most non-ionic, anionic and cationic agents.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSuitable for latex binders:\u003c\/strong\u003e and for slurries with powerful wetting agents.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow dosage:\u003c\/strong\u003e a small amount of diluted emulsion is enough.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ New and existing slurries for the ceramic shell\u003c\/li\u003e\u003cli\u003e✓ Slurries with latex binder and powerful wetting agents\u003c\/li\u003e\u003cli\u003e✓ Investment casting and art casting\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eDilute: by hand or with a very slow-running mixer, add 1 part Burst 100 to 9 parts cold (16 to 32 °C) deionised or distilled water. Do not overmix, or the emulsion may partly break down.\u003c\/li\u003e\u003cli\u003eNew slurry: add up to 0.20 vol.% diluted antifoam to the liquid portion before adding the flour. That is about 2 ml per litre.\u003c\/li\u003e\u003cli\u003eExisting slurry: start with 5 to 20 ml diluted Burst 100 for a total volume of up to about 190 litres, and 10 to 40 ml for larger volumes.\u003c\/li\u003e\u003cli\u003eAdd the diluted antifoam slowly while mixing well. Otherwise it may float as an oily patch on the slurry and reach the wax, which impairs wetting.\u003c\/li\u003e\u003cli\u003eTwo smaller additions a few hours apart are better than one large addition.\u003c\/li\u003e\u003cli\u003eDiscard any diluted emulsion you do not use within 24 to 36 hours.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ The amount needed depends on binder, flour, additives and mixing procedure. Practical experience determines the right dosage.\u003c\/li\u003e\u003cli\u003e✓ Burst 100 is sensitive to temperatures below 5 °C and above 40 °C. Protect it from frost.\u003c\/li\u003e\u003cli\u003e✓ If the product has been frozen, let it thaw, stir it well and test it before use, for example for its effect on the surface tension of colloidal silica.\u003c\/li\u003e\u003cli\u003e✓ Stable for up to 1 year in a closed container at 20 °C.\u003c\/li\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom solutions, email info@siliconesandmore.com.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eStruggling with foam in your slurry or unsure about the dosage? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":" 1 kg.  B2B","offer_id":49531872674133,"sku":"S10927","price":19.95,"currency_code":"EUR","in_stock":false},{"title":"4 Kg B2B","offer_id":49531872739669,"sku":"A10228","price":60.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-burst-rsd-100-48098044674389.jpg?v=1727353138"},{"product_id":"plakwas","title":"Remet Sticktite 271 Sticky Wax – Adhesive Wax for Assembling Sprues \u0026 Casting Trees","description":"\u003ch2\u003eSticky wax for assembling sprues and casting trees\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Sticktite 271\u003c\/strong\u003e is a sticky wax for assembling sprues and vents onto wax patterns and casting trees. The wax gives the joined parts exceptionally high adhesive and cohesive strength. The softening point is 71 °C, the penetration at 25 °C is 18 dmm and the ash content a maximum of 0.03%.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eExceptionally high adhesion:\u003c\/strong\u003e for strong joints between wax parts.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh cohesion:\u003c\/strong\u003e the joint stays intact when handling the casting tree.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e a maximum of 0.03% after burnout.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFast:\u003c\/strong\u003e the joint is hard once cooled.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Assembling sprues and vents\u003c\/li\u003e\u003cli\u003e✓ Building casting trees for art foundries\u003c\/li\u003e\u003cli\u003e✓ Joining wax parts\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the sticky wax and do not heat it above 140 °C.\u003c\/li\u003e\u003cli\u003eApply the liquid wax to both ends you want to join.\u003c\/li\u003e\u003cli\u003ePress the parts together immediately and let the joint cool until it is hard.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003cli\u003e✓ Never heat the wax above 140 °C and do not hold it at high temperature for long periods. Otherwise the product will degrade thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in the fumes.\u003c\/li\u003e\u003cli\u003e✓ Store the wax dry, cool and sealed.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eWould you like advice on building your casting tree or the right wax for your sprues? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg.","offer_id":49531873001813,"sku":"S10426","price":14.5,"currency_code":"EUR","in_stock":false},{"title":"25 kg.","offer_id":49531873034581,"sku":"A10328","price":321.78,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-plakwas-remet-sticktite-271-48098044739925.jpg?v=1768233873"},{"product_id":"victawet","title":"Victawet 12 Wetting Agent – Better Slurry-to-Wax Adhesion for Ceramic Shell","description":"\u003ch2\u003eWetting agent for better slurry adhesion to wax\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eVictawet 12\u003c\/strong\u003e is a non-ionic, low-foaming organic phosphate ester. You use it as a wetting agent in ceramic shell slurries, with both acidic and alkaline binders. Victawet 12 helps the slurry adhere better to the wax surface. It is a 100% active liquid with a specific gravity of 1.12.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eBetter wax adhesion:\u003c\/strong\u003e the slurry wets the wax pattern evenly.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eVersatile:\u003c\/strong\u003e works in acidic and alkaline binders.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow foam:\u003c\/strong\u003e non-ionic and low-foaming.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow dosage:\u003c\/strong\u003e normally below 0.75% by volume.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Primary slurries for ceramic shell\u003c\/li\u003e\u003cli\u003e✓ Investment casting and art casting\u003c\/li\u003e\u003cli\u003e✓ Slurries based on colloidal silica\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eBefore use, measure the pH of a 0.5% solution of Victawet 12.\u003c\/li\u003e\u003cli\u003eAdd 0.25% by volume to primary slurries, based on the total binder liquid (binder plus concentrate plus any dilution water).\u003c\/li\u003e\u003cli\u003eCheck that the slurry wets the wax parts properly. If not, add more in 0.05% increments until wetting is satisfactory.\u003c\/li\u003e\u003cli\u003eNormally stay below 0.75% by volume.\u003c\/li\u003e\u003cli\u003eAlways use Victawet 12 together with an effective anti-foam, such as \u003ca href=\"\/en\/products\/burst-rsd-100\"\u003eBurst 100\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Victawet 12 hydrolyses over time, producing an acid.\u003c\/li\u003e\u003cli\u003e✓ Do not add it to alkaline colloidal silica if the pH of the 0.5% solution has dropped below approx. 3.0 to 3.5. It is still safe to use with LUDOX SK grades.\u003c\/li\u003e\u003cli\u003e✓ Causes serious eye irritation. Wear eye protection and protective clothing.\u003c\/li\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure about the dosage in your own slurry or binder? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"250 Gram B2B","offer_id":49531875754325,"sku":"S10926","price":57.0,"currency_code":"EUR","in_stock":true},{"title":"1 Kg B2B","offer_id":49531875819861,"sku":"A10449","price":114.68,"currency_code":"EUR","in_stock":true},{"title":"4 Kg B2B","offer_id":52583912800597,"sku":null,"price":400.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-victawet-12-48098044641621.jpg?v=1727353138"},{"product_id":"gietwas-b76t","title":"Remet Casting Wax B76 T Lightly Filled – Hard Precision Wax with Good Flow for Injection","description":"\u003ch2\u003eHard, lightly filled precision wax with good flow\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Casting Wax B76 T\u003c\/strong\u003e is a lightly filled pattern wax for investment casting. Its melt viscosity is low (325 cSt at 99 °C), which gives good flow properties and efficient dewaxing. Compared with \u003ca href=\"\/en\/products\/casting-wax-b59\"\u003eCasting Wax B59\u003c\/a\u003e, B76 T contains less filler (23 %), is harder and has a higher melting point of 77.5 °C. The ash content after burnout is a maximum of 0.03 %.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eGood flow:\u003c\/strong\u003e low melt viscosity of 325 cSt at 99 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEfficient dewaxing:\u003c\/strong\u003e the wax melts out of the shell easily.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHard:\u003c\/strong\u003e penetration 5 dmm at 25 °C, harder than B59.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLightly filled:\u003c\/strong\u003e 23 % filler.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e a maximum of 0.03 % after burnout.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Pattern wax for investment casting\u003c\/li\u003e\u003cli\u003e✓ Injection wax for small to medium-sized patterns\u003c\/li\u003e\u003cli\u003e✓ Highly detailed patterns\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax evenly and do not heat it above 100 °C.\u003c\/li\u003e\u003cli\u003eDo not keep the wax at high temperature for longer than necessary.\u003c\/li\u003e\u003cli\u003eProcess the wax into patterns according to your own injection process.\u003c\/li\u003e\u003cli\u003eLet the patterns cool completely before assembling them.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C and do not hold it at high temperature for long. Otherwise the product degrades thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in the fumes.\u003c\/li\u003e\u003cli\u003e✓ Store the wax dry, cool and closed.\u003c\/li\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom solutions, email info@siliconesandmore.com.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure whether B76 T or B59 suits your patterns better? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"25 kg.","offer_id":49531875787093,"sku":"777780","price":250.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-gietwas-b76t-licht-gevuld-48098049360213.jpg?v=1727353390"},{"product_id":"gietwas-28-naturel","title":"Remet Casting Wax 28 Natural (Castylene B528) – Flexible Wax for Brush Work \u0026 Slush Casting","description":"\u003ch2\u003eFlexible casting wax for brush work and slush casting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Casting Wax 28 Natural\u003c\/strong\u003e (Castylene B528) is a flexible, unfilled wax with low viscosity for the art casting industry. You use it as a brush wax and as a melt-pour casting wax in moulds made of natural or synthetic rubber. If required, you can also use it for a wax treatment. The melting point is 68 °C, the congealing point 64 °C and the viscosity at 99 °C just 15 cSt. After burnout, a maximum of 0.03% ash remains.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFlexible:\u003c\/strong\u003e penetration 24 dmm at 25 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFree-flowing:\u003c\/strong\u003e 15 cSt at 99 °C, for fine detail.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eUnfilled:\u003c\/strong\u003e 0% filler, ash content max. 0.03%.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eVersatile:\u003c\/strong\u003e as a brush wax, as a casting wax and for a wax treatment.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Brush wax for the first layer in the mould\u003c\/li\u003e\u003cli\u003e✓ Slush casting in natural or synthetic rubber moulds\u003c\/li\u003e\u003cli\u003e✓ Wax treatment\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax evenly and do not heat it above 100 °C.\u003c\/li\u003e\u003cli\u003eDo not keep the wax at high temperature for longer than necessary.\u003c\/li\u003e\u003cli\u003eApply the wax with a brush or pour it into the rubber mould, according to your own process.\u003c\/li\u003e\u003cli\u003eLet the wax pattern cool completely before removing it from the mould.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003cli\u003e✓ Never heat the wax above 100 °C and do not hold it at high temperature for long periods. Otherwise the product will degrade thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your mould and casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"25 kg. B2B","offer_id":49531876442453,"sku":"A10393","price":346.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-gietwas-28-naturel-48098049458517.jpg?v=1727353390"},{"product_id":"remasil-50","title":"Remet Remasil 50 Aluminosilicate – Stucco \u0026 Flour for Strong Ceramic Shells","description":"\u003ch2\u003eAluminosilicate stucco and flour for strong ceramic shells\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Remasil 50\u003c\/strong\u003e is a refractory aluminosilicate for building ceramic shells in investment and art casting. You can choose stucco in two grain sizes, 16\/30 mesh and 30\/60 mesh, and flour at 200 mesh. The stucco is custom ground into a uniform product with a narrow particle size range and few fines. This improves the permeability of the shell.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eStronger than fused silica:\u003c\/strong\u003e more strength than shells based on fused silica.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh hot strength:\u003c\/strong\u003e robust and resilient during casting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasy knockout:\u003c\/strong\u003e the shell is easy to remove after casting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow dust:\u003c\/strong\u003e narrow particle size range with minimal fines, for better permeability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTwo grain sizes:\u003c\/strong\u003e so you can build the shell efficiently.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Stuccoing ceramic shells\u003c\/li\u003e\u003cli\u003e✓ Flour for making slurry\u003c\/li\u003e\u003cli\u003e✓ Investment casting and art casting\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eDip the wax pattern in the slurry, for example \u003ca href=\"\/en\/products\/jus-dip\"\u003eRemasol Jus-Dip\u003c\/a\u003e, and let the excess drain off.\u003c\/li\u003e\u003cli\u003eStucco the wet coat with the finer 30\/60 mesh stucco.\u003c\/li\u003e\u003cli\u003eLet each coat dry well before applying the next.\u003c\/li\u003e\u003cli\u003eBuild up the shell to the desired thickness with the coarser 16\/30 mesh stucco.\u003c\/li\u003e\u003cli\u003eUse the 200 mesh flour as a refractory filler when making your own slurry.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003cli\u003e✓ Avoid breathing in dust when pouring and stuccoing. Use extraction or wear respiratory protection.\u003c\/li\u003e\u003cli\u003e✓ Store the bags dry and closed.\u003c\/li\u003e\u003cli\u003e✓ Supplied in 25 kg bags.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eWould you like advice on building your shell or choosing between the grain sizes? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"16-30 mesh. 25 kg. B2B","offer_id":49531876737365,"sku":"A10201","price":85.0,"currency_code":"EUR","in_stock":true},{"title":"30-60 mesh. 25 kg. B2B","offer_id":49531876802901,"sku":"A10202","price":85.0,"currency_code":"EUR","in_stock":true},{"title":"Flour 200 mesh. 25 kg.  B2B","offer_id":49531876868437,"sku":"A10203","price":85.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-remasil-50-aluminosilicaat-stukko-en-meel-48098049786197.png?v=1727353414"},{"product_id":"b95","title":"Remet Casting Wax B95 Castylene – Unfilled Injection Wax for Jewellery \u0026 Sprues","description":"\u003ch2\u003eUnfilled injection wax for jewellery and sprues\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Casting Wax B95 Castylene\u003c\/strong\u003e is an unfilled wax for the jewellery industry. You use it to inject highly detailed patterns and as a sprue wax. The melting point is 67 °C, the congealing point 63 °C and the viscosity at 99 °C only 90 cSt. A maximum of 0.03% ash remains after burnout.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eUnfilled:\u003c\/strong\u003e burns out cleanly, ash content max. 0.03%.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eVery fluid:\u003c\/strong\u003e 90 cSt at 99 °C, for fine detail.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSlightly flexible:\u003c\/strong\u003e penetration 8 dmm at 25 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e easy to dose.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Injecting jewellery patterns\u003c\/li\u003e\u003cli\u003e✓ Sprues and casting trees\u003c\/li\u003e\u003cli\u003e✓ Highly detailed patterns\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the pastilles evenly and do not heat them above 100 °C.\u003c\/li\u003e\u003cli\u003eInject or pour the wax according to your own process.\u003c\/li\u003e\u003cli\u003eLet the patterns cool before removing and assembling them.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003cli\u003e✓ Never heat the wax above 100 °C and do not hold it at high temperature for long periods. Otherwise the product will degrade thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in the fumes.\u003c\/li\u003e\u003cli\u003e✓ Store the wax dry, cool and sealed.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your jewellery or casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"25 kg.","offer_id":49531877917013,"sku":"A10288","price":212.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-gietwas-b95-48098049327445.jpg?v=1727353390"},{"product_id":"chavant-monu-melt","title":"Chavant Monu-Melt – Meltable Sulphur-Free Clay for Brushing onto Foam \u0026 Sculpting","description":"\u003ch2\u003eMeltable clay to brush onto foam and sculpt in detail\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChavant Monu-Melt\u003c\/strong\u003e is a sulphur-free, non-hardening clay that is tack-free, odourless and stays flexible. You melt the clay and brush it onto foam, for example a CNC-milled foam core. Once cool, you sculpt fine detail into it. At approx. 77 °C you can spread Monu-Melt with a trowel, at approx. 85 °C it can be brushed. Choose between Medium (softens at 60 °C) and Hard (softens at 63 °C), in dark green.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eBrushable when melted:\u003c\/strong\u003e apply the clay in layers onto foam or an armature.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStays stable:\u003c\/strong\u003e does not oxidise and can be heated and cooled repeatedly without significant change.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not dry out:\u003c\/strong\u003e the clay does not crack and stays reusable.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePleasant to use:\u003c\/strong\u003e tack-free, odourless and flexible.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTwo hardnesses:\u003c\/strong\u003e Medium or Hard, depending on how firm your work needs to be.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Applying clay to CNC-milled foam cores\u003c\/li\u003e\u003cli\u003e✓ Large sculptures and monumental models\u003c\/li\u003e\u003cli\u003e✓ Design and prototype models\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eHeat the clay with temperature control. At approx. 77 °C you spread it with a trowel, at approx. 85 °C you can brush it.\u003c\/li\u003e\u003cli\u003eKeep the temperature below 93 °C. Above that the liquid clay starts to bubble. This is usually only cosmetic and does not affect the cooled clay.\u003c\/li\u003e\u003cli\u003eBrush the clay in layers onto the foam or armature.\u003c\/li\u003e\u003cli\u003eLet the clay cool and then sculpt the details.\u003c\/li\u003e\u003cli\u003eWash your hands with soap and water after use.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Take care with melted clay: hot clay can cause burns.\u003c\/li\u003e\u003cli\u003e✓ Monu-Melt does not work well with addition-cure (platinum) silicones. Always do a test before moulding.\u003c\/li\u003e\u003cli\u003e✓ Looking for a clay you sculpt at room temperature? Take a look at \u003ca href=\"\/en\/products\/chavant-le-beau-touche\"\u003eLe Beau Touché\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure whether Medium or Hard suits your work better? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Chavant","offers":[{"title":"Chavant Monu-Melt Block Medium (dark green)","offer_id":49531879096661,"sku":"A11804","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Chavant Monu-Melt Block Hard (dark green) (906 gr)","offer_id":49531879129429,"sku":"A10607","price":17.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/chavant-chavant-monu-melt-906-gram-48098052604245.jpg?v=1727353541"},{"product_id":"fused-silica-lht-nl","title":"Remet Fused Silica LHT – Low-Expansion Refractory Flour \u0026 Sand for the Ceramic Shell","description":"\u003ch2\u003eLow-expansion refractory flour and sand for the ceramic shell\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Fused Silica LHT\u003c\/strong\u003e is very pure fused silica for building the ceramic shell. The material has low thermal expansion, excellent thermal shock resistance and low thermal conductivity. It is light and highly permeable, and the shell is easy to remove after casting. You use it for bronze, aluminium and steel. It is available as flour in 325, 200 and 120 mesh and as sand in 50\/100, 20\/50 and 10\/20 mesh.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLow thermal expansion:\u003c\/strong\u003e a dimensionally stable shell at high temperature.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExcellent thermal shock resistance:\u003c\/strong\u003e the shell copes well with rapid temperature changes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGood insulator:\u003c\/strong\u003e low thermal conductivity.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLight and permeable:\u003c\/strong\u003e a lightweight shell with high gas permeability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasy knock-out:\u003c\/strong\u003e the shell is easy to remove after casting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eVery pure:\u003c\/strong\u003e for a long slurry life.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Flour for ceramic shell slurries\u003c\/li\u003e\u003cli\u003e✓ Sand for stuccoing the shell coats\u003c\/li\u003e\u003cli\u003e✓ Investment and art casting of bronze, aluminium and steel\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMix the flour with a binder, for example \u003ca href=\"\/en\/products\/adbond-advantage\"\u003eRemasol Adbond Advantage\u003c\/a\u003e, to make a slurry.\u003c\/li\u003e\u003cli\u003eDip the wax pattern into the slurry, let it drain and stucco the wet coat with fused silica sand.\u003c\/li\u003e\u003cli\u003eUse a coarser grain for each subsequent coat. This increases shell strength while keeping good gas permeability.\u003c\/li\u003e\u003cli\u003eLet each coat dry thoroughly before applying the next.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Avoid creating dust when pouring and mixing flour and sand, and do not breathe in the dust.\u003c\/li\u003e\u003cli\u003e✓ Store the material dry and in its closed packaging.\u003c\/li\u003e\u003cli\u003e✓ Other mesh sizes and larger quantities are available on request.\u003c\/li\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom solutions, email info@siliconesandmore.com.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which grain size to use for each coat? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"RG3 Sand  10\/20 Mesh 25 Kg. B2B","offer_id":49531879424341,"sku":"A10117","price":107.65,"currency_code":"EUR","in_stock":true},{"title":"RG2 Sand 20\/50 Mesh 25 Kg. B2B","offer_id":49531879457109,"sku":"A10116","price":83.95,"currency_code":"EUR","in_stock":true},{"title":"RG1 Sand  50\/100 Mesh 25 kg. B2B","offer_id":49531879489877,"sku":"A10115","price":83.95,"currency_code":"EUR","in_stock":true},{"title":"RP2 Flour 120 mesh 25 kg. B2B","offer_id":49531879391573,"sku":"A10114","price":107.65,"currency_code":"EUR","in_stock":true},{"title":"RP1 Flour 200 mesh 25 kg. B2B","offer_id":49531879358805,"sku":"A10113","price":107.65,"currency_code":"EUR","in_stock":true},{"title":"Fused silica flour 325 Mesh [25 kg]","offer_id":49923684532565,"sku":"A11963","price":84.0,"currency_code":"EUR","in_stock":true},{"title":"Quotation for larger quantities or delivery outside BeNeLux and Germany","offer_id":49531879555413,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-fused-silica-lht-meel-en-zand-48098049229141.jpg?v=1727353390"},{"product_id":"chavant-le-beau-touche","title":"Chavant Le Beau Touché – Sulphur-Free Plasteline with High Tack for Sculpting \u0026 Modelling","description":"\u003ch2\u003eSulphur-free plasteline with high tack for fine sculpting\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChavant Le Beau Touché\u003c\/strong\u003e is a sulphur-free, non-drying plasteline from the American manufacturer Chavant. The clay is very smooth, flexible and has a high tack, so new layers stick to your work straight away. The Original version has a hardness of Shore 17A and softens at approx. 38 °C. You receive a 0.907 kg (2 lb) block, individually wrapped in plastic.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSulphur-free:\u003c\/strong\u003e silicone friendly according to Chavant, so suitable for models you mould with silicone rubber.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh tack:\u003c\/strong\u003e layers of clay bond well to each other and to your work.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eVery smooth:\u003c\/strong\u003e the surface can be finished neatly with rakes and a solvent.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not dry out:\u003c\/strong\u003e the clay stays workable and is reusable.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFlexible:\u003c\/strong\u003e the clay bends without cracking.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Figurative sculpting, portraits and fine art\u003c\/li\u003e\u003cli\u003e✓ Models and master models for moulding with silicone rubber\u003c\/li\u003e\u003cli\u003e✓ Education and professional sculpting\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eFor figurative work, build an armature first. Le Beau Touché is not self-supporting.\u003c\/li\u003e\u003cli\u003eSculpt with traditional wooden or metal clay tools.\u003c\/li\u003e\u003cli\u003eSmooth the surface with rakes, spreaders and hand pressure. Naphtha, clear mineral spirits or 99 % isopropyl alcohol help with smoothing.\u003c\/li\u003e\u003cli\u003eClean tools and surfaces with naphtha or 99 % isopropyl alcohol.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Citrus-based solvents such as D-limonene can inhibit the cure of silicone rubber. Do not use them on clay you intend to mould.\u003c\/li\u003e\u003cli\u003e✓ Le Beau Touché is sulphur-free. With addition-cure (platinum) silicones, always do a small test first anyway.\u003c\/li\u003e\u003cli\u003e✓ If you work in a room warmer than 32 °C, choose the firmer \u003ca href=\"\/en\/products\/chavant-le-beau-touche-hm-906-gram\"\u003eLe Beau Touché HM (HTR)\u003c\/a\u003e.\u003c\/li\u003e\u003cli\u003e✓ Do not overheat the clay: overheated clay can cause serious burns.\u003c\/li\u003e\u003cli\u003e✓ Unopened, at room temperature and away from sunlight or UV, the shelf life is 2 years. Store an opened block airtight or fully wrapped in plastic.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which Chavant clay best suits your project and workspace? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Chavant","offers":[{"title":"HTR - Red-Brown","offer_id":49531879522645,"sku":"A10608","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/chavant-chavant-le-beau-touche-906-gram-48494952481109.png?v=1730788718"},{"product_id":"gietwas-b59","title":"Remet Casting Wax B59 Lightly Filled – Precision Wax for Small \u0026 Medium Patterns","description":"\u003ch2\u003eLightly filled precision wax for small and medium patterns\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Casting Wax B59\u003c\/strong\u003e is a lightly filled pattern wax for small to medium-sized patterns in investment casting. The wax contains 28 % filler, is blue and is supplied as pastilles. The melting point is 66 °C, the congealing point 65 °C and the viscosity 420 cSt at 99 °C. A maximum of 0.03 % ash remains after burnout.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLightly filled:\u003c\/strong\u003e 28 % filler for dimensionally stable patterns.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHard at room temperature:\u003c\/strong\u003e penetration 7 dmm at 25 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNarrow melting range:\u003c\/strong\u003e melting point 66 °C and congealing point 65 °C are close together.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e a maximum of 0.03 % after burnout.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Pattern wax for investment casting\u003c\/li\u003e\u003cli\u003e✓ Small and medium-sized patterns\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax evenly and do not heat it above 100 °C.\u003c\/li\u003e\u003cli\u003eDo not keep the wax at high temperature for longer than necessary.\u003c\/li\u003e\u003cli\u003eProcess the wax into patterns according to your own process.\u003c\/li\u003e\u003cli\u003eLet the patterns cool completely before assembling them.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C and do not hold it at high temperature for long. Otherwise the product degrades thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in the fumes.\u003c\/li\u003e\u003cli\u003e✓ Store the wax dry, cool and closed.\u003c\/li\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom solutions, email info@siliconesandmore.com.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your patterns and casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"25 kg.","offer_id":49531879817557,"sku":"A10464","price":295.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-gietwas-b59-licht-gevuld-48098049425749.jpg?v=1727353390"},{"product_id":"jus-dip-starterkit","title":"Remet Jus-Dip Starter Kit – Ready-to-Use Slurry \u0026 Remasil 50 Stucco for Ceramic Shell","description":"\u003ch2\u003eEverything you need to start with ceramic shell\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eRemet Jus-Dip Starter Kit\u003c\/strong\u003e gives you the slurry and the stucco for a ceramic shell in one go. The kit contains a resealable container of \u003ca href=\"\/en\/products\/jus-dip\"\u003eRemasol Jus-Dip\u003c\/a\u003e ready-to-use slurry and three bags of \u003ca href=\"\/en\/products\/remasil-50\"\u003eRemasil 50\u003c\/a\u003e aluminosilicate stucco: two bags of 16\/30 mesh and one bag of 30\/60 mesh.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eReady-to-use slurry:\u003c\/strong\u003e Jus-Dip does not need constant stirring, you dip straight from the container.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDryness indicator:\u003c\/strong\u003e Jus-Dip contains Sci-Dry, which shows when a coat is dry enough.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTwo grain sizes:\u003c\/strong\u003e finer 30\/60 for the first coats, coarser 16\/30 for building up.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStrong shell:\u003c\/strong\u003e Remasil 50 gives more strength than fused silica systems and knocks out easily.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Getting started with the ceramic shell process\u003c\/li\u003e\u003cli\u003e✓ Art foundries and education\u003c\/li\u003e\u003cli\u003e✓ Primary and backup coats of the ceramic shell\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eStir the Jus-Dip slurry thoroughly and bring the slurry and wax pattern to roughly the same temperature.\u003c\/li\u003e\u003cli\u003eDip the pattern in the slurry and let the excess drain off.\u003c\/li\u003e\u003cli\u003eStucco the wet coat with Remasil 50 30\/60 for the first coats.\u003c\/li\u003e\u003cli\u003eLet each coat dry until the Sci-Dry indicator shows the shell is ready for the next coat.\u003c\/li\u003e\u003cli\u003eBuild up the shell to the desired thickness with Remasil 50 16\/30.\u003c\/li\u003e\u003cli\u003eReseal the Jus-Dip container after use.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003cli\u003e✓ We only ship Jus-Dip on a pallet and at temperatures above 5 °C.\u003c\/li\u003e\u003cli\u003e✓ Reseal the Jus-Dip container properly after use and keep the Remasil dry.\u003c\/li\u003e\u003cli\u003e✓ Jus-Dip may cause an allergic skin reaction. Wear gloves and eye protection and avoid breathing in dust when stuccoing.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eStarting out with ceramic shell and would like advice on the number of coats or drying times? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"Shipping to Germany, Netherlands and Belgium","offer_id":49531880309077,"sku":"S11338","price":622.0,"currency_code":"EUR","in_stock":false},{"title":"Quotation for outside BeNeLux and Germany","offer_id":49531880341845,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-jus-dip-starterkit-kant-en-klare-slurry-en-bezandings-kit-48098049589589.jpg?v=1727353414"},{"product_id":"adbond-advantage","title":"Remet Remasol Adbond Advantage – Ready-to-Use Primary Binder for Ceramic Shell \u0026 Investment Casting","description":"\u003ch2\u003eReady-to-use primary binder for the ceramic shell\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet REMASOL® ADBOND® Advantage\u003c\/strong\u003e is a ready-to-use, water-based binder for making the slurry for the ceramic shell. Thanks to its increased adhesion to wax surfaces, it is an ideal primary binder. The silica and polymer levels have been optimised for maximum adhesion, strength and elasticity, and a wetting agent and antifoam have already been added.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eExcellent adhesion to wax:\u003c\/strong\u003e the primary coat bonds well to the wax pattern.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFewer defects:\u003c\/strong\u003e helps prevent common primary coat defects such as cracking and buckling.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReady to use:\u003c\/strong\u003e wetting agent and antifoam are already added.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBroadly compatible:\u003c\/strong\u003e with the refractories commonly used in primary slurries, such as fused silica, zircon and alumina.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStable:\u003c\/strong\u003e stable pH and long slurry life.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBetter permeability:\u003c\/strong\u003e improves the gas permeability of the shell.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRobust:\u003c\/strong\u003e works well under less than ideal drying, environmental and processing conditions.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Primary slurry for the ceramic shell\u003c\/li\u003e\u003cli\u003e✓ Investment casting and art casting\u003c\/li\u003e\u003cli\u003e✓ Slurries with \u003ca href=\"\/en\/products\/fused-silica-lht-en\"\u003efused silica\u003c\/a\u003e, zircon or alumina\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eUse the binder as supplied; you do not need to add wetting agent or antifoam.\u003c\/li\u003e\u003cli\u003eMix the binder with the refractory flour of your choice to make a primary slurry.\u003c\/li\u003e\u003cli\u003eApply the slurry as the first coat on the wax pattern and build up the shell according to your own process.\u003c\/li\u003e\u003cli\u003eFeel free to ask us about mixing ratios and shell build-up.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Store the binder between 5 °C and 30 °C and protect it from frost.\u003c\/li\u003e\u003cli\u003e✓ To prevent frost damage, we only ship this product when the outside temperature is above 5 °C.\u003c\/li\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom solutions, email info@siliconesandmore.com.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure about the composition of your slurry or the build-up of your ceramic shell? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":" 5 kilo \/ 4.27 liter B2B","offer_id":49531880440149,"sku":"S10668","price":37.8,"currency_code":"EUR","in_stock":false},{"title":"25 kilos \/ 21.37 liters B2B","offer_id":49531880472917,"sku":"S10678","price":173.95,"currency_code":"EUR","in_stock":false},{"title":"240 kg. \/ 205.13 liters B2B","offer_id":49531880505685,"sku":"A10353","price":1379.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-adbond-advantage-48098049294677.jpg?v=1727353390"},{"product_id":"gietwas-81-blue","title":"Remet Casting Wax B81 Blue – Unfilled Injection Wax for Liquid \u0026 Paste Injection","description":"\u003ch2\u003eUnfilled injection wax for liquid and paste injection\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Casting Wax B81 Blue\u003c\/strong\u003e is an unfilled pattern wax for investment casting. The wax has a low melt viscosity (85 cSt at 99 °C) and a relatively low melting point of 65 °C. Thanks to its low congealing point of 59 °C, it is suitable for both paste injection and traditional liquid injection. The material is tough and flexible, so patterns do not break or chip during handling and assembly. The ash content after burnout is a maximum of 0.03 %.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eLiquid and paste injection:\u003c\/strong\u003e thanks to the low congealing point of 59 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eTough and flexible:\u003c\/strong\u003e patterns do not break or chip during handling and assembly.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFlows well:\u003c\/strong\u003e low melt viscosity of 85 cSt at 99 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e a maximum of 0.03 % after burnout.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eUnfilled:\u003c\/strong\u003e no filler, supplied as blue pastilles.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Pattern wax for investment casting\u003c\/li\u003e\u003cli\u003e✓ Injection of wax patterns, liquid or as a paste\u003c\/li\u003e\u003cli\u003e✓ Art casting and slush casting\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax evenly and do not heat it above 100 °C.\u003c\/li\u003e\u003cli\u003eLiquid injection: process the wax at 65 to 70 °C.\u003c\/li\u003e\u003cli\u003ePaste injection: process the wax at 54 to 59 °C.\u003c\/li\u003e\u003cli\u003eDo not keep the wax at high temperature for longer than necessary.\u003c\/li\u003e\u003cli\u003eLet the patterns cool completely before assembling them.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C and do not hold it at high temperature for long. Otherwise the product degrades thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in the fumes.\u003c\/li\u003e\u003cli\u003e✓ Store the wax dry, cool and closed.\u003c\/li\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom solutions, email info@siliconesandmore.com.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your patterns and injection process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"Casting wax B81, 1 kg","offer_id":49531880931669,"sku":"S11145","price":9.95,"currency_code":"EUR","in_stock":false},{"title":"Casting wax B81, 3 Kg Bucket","offer_id":49531880964437,"sku":"S11344","price":29.87,"currency_code":"EUR","in_stock":false},{"title":"Casting wax B81, 25 kg.","offer_id":49531880997205,"sku":"A10387","price":248.2,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-gietwas-81-blauw-48098049491285.jpg?v=1727353390"},{"product_id":"wax-allround","title":"Remet Wax Allround – Firm Casting Wax for Patterns, Slush Casting \u0026 Sprues","description":"\u003ch2\u003eVersatile casting wax for patterns and sprues\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Wax Allround\u003c\/strong\u003e is a versatile casting wax with good detail reproduction and shape retention during demoulding. You can cast patterns with it or use it for slush casting, and the wax also works well for sprues. The wax is firm and does not sag, even in summer. The melting point is between 68 and 74 °C and less than 0.2% ash remains after burnout.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eUniversal:\u003c\/strong\u003e for patterns, slush casting and sprues.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e good detail reproduction and shape retention during demoulding.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e does not sag, not even in summer.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWorkable:\u003c\/strong\u003e you can finish the cast pattern with tools.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e easy to dose, not grainy and not sticky.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Casting wax patterns for bronze casting\u003c\/li\u003e\u003cli\u003e✓ Slush casting of hollow wax patterns\u003c\/li\u003e\u003cli\u003e✓ Sprues and casting trees\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax to approx. 74 °C.\u003c\/li\u003e\u003cli\u003ePour the liquid wax into an open mould.\u003c\/li\u003e\u003cli\u003eLet the wax set briefly and pour the still-liquid wax back out. A thin wax shell remains.\u003c\/li\u003e\u003cli\u003eRepeat until the desired wall thickness is reached.\u003c\/li\u003e\u003cli\u003eFinish the pattern with tools after demoulding if needed.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change its properties.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ The colour may vary from batch to batch.\u003c\/li\u003e\u003cli\u003e✓ Shelf life of at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your patterns or casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531881029973,"sku":"S10830","price":7.5,"currency_code":"EUR","in_stock":true},{"title":"3 kg. bucket","offer_id":49531881062741,"sku":"S10626","price":18.0,"currency_code":"EUR","in_stock":true},{"title":"25 kg","offer_id":49531881095509,"sku":"S11403","price":136.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-allround-48098052309333.jpg?v=1727353541"},{"product_id":"lichtgewicht-kneedepoxy","title":"Lightweight kneadable Epoxy","description":"\u003cp\u003eThe lightweight malleable epoxy is a very light and strong kneadable epoxy that is widely used for making models or maquettes. The epoxy paste has a low density and is filled with a filler which makes it easy to work with. This kneading epoxy adheres well to many kinds of surfaces through which the epoxy, alongside models and large models, also is well used as a sealing compound, glue or fixer emulsion.\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSuitable for large and small models\u003c\/li\u003e\r\n\u003cli\u003eVery lightweight\u003c\/li\u003e\r\n\u003cli\u003eEasy to edit after hardening\u003c\/li\u003e\r\n\u003cli\u003eCan be used as filler\u003c\/li\u003e\r\n\u003cli\u003eAdheres permanently to many materials\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003cb\u003eTechnische\u003c\/b\u003e\u003c\/strong\u003e \u003cstrong\u003e\u003cb\u003egegevens\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eMixing ratio in weight: A:B = 1:1\u003c\/li\u003e\r\n\u003cli\u003eHandling time: 20 minutes\u003cstrong\u003e\u003cbr \/\u003e\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003cli\u003eGeltime (15 ml, 5 mm at 25°C): 2-3 hours\u003c\/li\u003e\r\n\u003cli\u003eFully hardened at 25°C: 15-20 hours\u003c\/li\u003e\r\n\u003cli\u003ePostcuring at 60°C (optional): 10-15 hours\u003c\/li\u003e\r\n\u003cli\u003eColor: white\u003c\/li\u003e\r\n\u003cli\u003eDensity at 25°C: 0.45-0.55 g\/ml. \u003c\/li\u003e\r\n\u003cli\u003eMaximum adviced thickness: 30-40 mm.\u003c\/li\u003e\r\n\u003cli\u003eMaximum Temperatur: 70°C\u003c\/li\u003e\r\n\u003cli\u003eHardness: Shore D 70-75\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eProcessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eWear suitable gloves when using \"lightweight kneadable epoxy\". Take equal parts of A and B (both have a pasty consistency) and mix them by hand or machine for 2 minutes to create a homogeneous mass. The paste can may be colored with a small amount of \u003ca href=\"https:\/\/www.siliconesandmore.com\/en\/products\/polyurethane-epoxy-dye\"\u003epigment\u003c\/a\u003e. The kneaded epoxy can now be applied (or processed) for 20 minutes.\u003c\/p\u003e\r\n\u003cp\u003eNote: The surface must be grease-free before bonding or filling of materials.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003ePost-treatment (post-cures)\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003ePost-curing of the material (slow baking at 60ºC for a few hours) is recommended to guarantee the stability and best properties of the product. Allow the heated product to cool slowly to prevent cracking.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003cbr \/\u003eThis product is best stored in sealed packaging in a dry place between 6-28°C. The individual components are moisture sensitive. If properly closed, it can be kept for at least 2 years.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety Requirements\u003c\/strong\u003e\u003cbr \/\u003eBoth the A and B components can cause skin hypersensitivity. Only use this product with proper protection: protective gloves, glasses and with adequate ventilation. Also read the safety data sheet for specific information.\u003c\/p\u003e\r\n\u003cp\u003eSkin contact: wash immediately with plenty of soap and water. Consult doctor if irritation persists.\u003cbr \/\u003eIf swallowed, drink plenty of water, DO NOT vomit. Consult a doctor!\u003cbr \/\u003eEye contact: Rinse for at least 15 minutes and consult a physician if irritation persists!\u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"Set 250 gram ","offer_id":49531881259349,"sku":"S10439","price":14.5,"currency_code":"EUR","in_stock":true},{"title":"Set 400 grams","offer_id":49531881292117,"sku":"S11303","price":19.95,"currency_code":"EUR","in_stock":true},{"title":"Set 1 kg.","offer_id":49531881324885,"sku":"S11304","price":36.5,"currency_code":"EUR","in_stock":true},{"title":"Set 5 kg.","offer_id":49531881357653,"sku":"S11305","price":131.0,"currency_code":"EUR","in_stock":false},{"title":"Set 20 kg.","offer_id":49531881423189,"sku":"S10453","price":444.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-lichtgewicht-kneedepoxy-48098053652821.jpg?v=1757509946"},{"product_id":"jus-dip","title":"Remet Remasol Jus-Dip – Ready-to-Use Slurry for Ceramic Shell \u0026 Art Casting","description":"\u003ch2\u003eReady-to-use slurry for ceramic shell\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Remasol Jus-Dip\u003c\/strong\u003e is a pre-blended slurry for building a ceramic shell. It contains optimised levels of refractory, additives and polymer. You do not need a rotating slurry tank: you only stir before use and dip your pattern straight into the resealable container. Jus-Dip contains Remet Sci-Dry, an indicator that shows when a coat is dry enough for the next, plus a wetting agent and an anti-foam.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eReady to go:\u003c\/strong\u003e lid off, stir and dip.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo slurry tank needed:\u003c\/strong\u003e no constant stirring, so no moving parts.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eMinimal waste:\u003c\/strong\u003e reseal the container after use and store it.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExcellent wax adhesion:\u003c\/strong\u003e wetting agent and anti-foam already blended in.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDryness indicator:\u003c\/strong\u003e Sci-Dry shows when the shell is ready for the next coat.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo dust when mixing:\u003c\/strong\u003e you do not add silica powder, so no inhalation of silica dust.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Primary coat of the ceramic shell\u003c\/li\u003e\u003cli\u003e✓ Backup coats, optionally diluted with deionised water\u003c\/li\u003e\u003cli\u003e✓ Art foundries and education\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003ePlace the container where you dip, remove the lid and stir the slurry thoroughly.\u003c\/li\u003e\u003cli\u003eBring the slurry and wax pattern to roughly the same temperature. This prevents cracks in the shell.\u003c\/li\u003e\u003cli\u003eDip the pattern straight into the container and stucco the wet coat, for example with \u003ca href=\"\/en\/products\/remasil-50\"\u003eRemasil 50\u003c\/a\u003e.\u003c\/li\u003e\u003cli\u003eLet each coat dry until the Sci-Dry indicator shows the shell is ready for the next coat.\u003c\/li\u003e\u003cli\u003eFor backup coats you can optionally dilute the slurry with deionised water.\u003c\/li\u003e\u003cli\u003eReseal the container after use. If you use a slurry tank, switch it off and cover the slurry to prevent evaporation.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This product is intended for the business market. For larger quantities or custom requirements, email info@siliconesandmore.com.\u003c\/li\u003e\u003cli\u003e✓ We only ship Jus-Dip on a pallet and at temperatures above 5 °C.\u003c\/li\u003e\u003cli\u003e✓ Reseal the container properly after use and store it in a suitable place.\u003c\/li\u003e\u003cli\u003e✓ May cause an allergic skin reaction. Wear gloves and eye protection.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eWould you like advice on building your ceramic shell or the number of coats? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"43,5 kg. Barrel  within BeNeLux and Germany","offer_id":49531881521493,"sku":"A11788","price":350.0,"currency_code":"EUR","in_stock":false},{"title":"175 kg. Barrel to Germany and BeNeLux","offer_id":49531881554261,"sku":"A10093","price":1069.06,"currency_code":"EUR","in_stock":false},{"title":"Quotation for outside BeNeLux and Germany","offer_id":49531881587029,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-jus-dip-kant-en-klare-slurry-48098049818965.jpg?v=1727353414"},{"product_id":"epoxy-steunkap-carbon-set","title":"Epoxy Support Shell Carbon Set – Lightweight Kneadable Carbon Fibre Epoxy for Silicone Mould Jackets","description":"\u003ch2\u003eKneadable carbon fibre epoxy for a rigid support shell around your silicone mould\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eEpoxy Support Shell Carbon Set\u003c\/strong\u003e is a two-component epoxy with carbon fibre that you use to make a rigid support shell (mother mould) around a silicone mould. Component A is a fibre-rich kneadable paste, component B a blue liquid. After kneading, you roll the mass out into a sheet and press it over the cured silicone mould. The support shell holds the flexible mould in shape during casting, so you can work with a thin layer of silicone. You have 25 to 30 minutes of working time and the epoxy is cured after 10 to 12 hours. Once cured, the support shell is particularly light, with a density of 0.50 to 0.55 g\/cm³.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eKneadable:\u003c\/strong\u003e you shape the mass over the mould by hand.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLightweight:\u003c\/strong\u003e cured density 0.50 to 0.55 g\/cm³.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon fibre reinforced:\u003c\/strong\u003e a rigid shell that keeps the silicone mould in shape.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSaves silicone:\u003c\/strong\u003e a thin silicone mould with a support shell instead of a solid block mould.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSimple mix ratio:\u003c\/strong\u003e 5:1.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Support shells around brush-on silicone moulds\u003c\/li\u003e\u003cli\u003e✓ Moulds of ornaments, decorative concrete and sculptures\u003c\/li\u003e\u003cli\u003e✓ Feet on larger moulds, kneaded from fresh epoxy and attached to the shell\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWeigh component A onto a piece of film and add component B in the correct ratio (5:1).\u003c\/li\u003e\u003cli\u003eWearing gloves, knead thoroughly until you have an even mass without streaks.\u003c\/li\u003e\u003cli\u003ePlace the mass between two layers of film, put a batten on each side and roll the mass out with a rolling pin into a sheet of even thickness.\u003c\/li\u003e\u003cli\u003eRemove the top film, drape the sheet over the cured silicone mould with the film side facing out and press it down everywhere, with no air between silicone and epoxy. Then remove the outer film as well.\u003c\/li\u003e\u003cli\u003eLet the sheets overlap by about 1 cm and massage the seams together well.\u003c\/li\u003e\u003cli\u003eLet the epoxy cure, then carefully remove the support shell from the silicone mould.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Do not mix more epoxy than you can use within the working time of 25 to 30 minutes.\u003c\/li\u003e\u003cli\u003e✓ Always wear gloves. Cured epoxy is difficult to remove from skin and work surfaces.\u003c\/li\u003e\u003cli\u003e✓ Once cured, the support shell withstands temperatures up to approximately 50 °C.\u003c\/li\u003e\u003cli\u003e✓ Store the support shell with the silicone mould so that the mould always keeps its correct shape.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure how best to build up the support shell for your mould? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Trias Chem srl","offers":[{"title":"1.2 Kg Set","offer_id":49531881718101,"sku":"S10326","price":30.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/trias-chem-srl-epoxy-steunkap-carbon-set-2-componenten-koolstofvezel-48098054603093.jpg?v=1758787454"},{"product_id":"apoxie-super-white","title":"Aves Apoxie Super White – Bright White Epoxy Clay for Sculpting, Detail Work \u0026 Bonding","description":"\u003ch2\u003eBright white epoxy clay with a fine grain for visible detail\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAves Apoxie Super White\u003c\/strong\u003e combines the workability of modelling clay with the bonding strength of epoxy. The clay has a firm, fine-grained consistency and a fresh white colour that lets you see details more clearly. You mix equal parts A and B and have about 1 hour of working time. After 24 hours at 20 °C the clay is fully cured, with no shrinkage and a smooth, semi-gloss finish.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eTrue white:\u003c\/strong\u003e brighter than the Stone White colour of \u003ca href=\"\/en\/products\/apoxiesculpt\"\u003eApoxie Sculpt\u003c\/a\u003e.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFine grain:\u003c\/strong\u003e suitable for fine detail work.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBonding strength of epoxy:\u003c\/strong\u003e adheres to most clean surfaces.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSelf-hardening and shrink-free:\u003c\/strong\u003e no oven needed and no shrinkage.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWater resistant:\u003c\/strong\u003e also water resistant once cured.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasy to finish:\u003c\/strong\u003e can be painted, stained and accented.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpting\u003c\/li\u003e\u003cli\u003e✓ Embellishing and accenting\u003c\/li\u003e\u003cli\u003e✓ Bonding\u003c\/li\u003e\u003cli\u003e✓ Filling\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWear suitable gloves.\u003c\/li\u003e\u003cli\u003eTake equal parts A and B and mix for 2 minutes to a homogeneous mass.\u003c\/li\u003e\u003cli\u003eLet the mixture stand for about 5 minutes before working with it.\u003c\/li\u003e\u003cli\u003eWork within about 1 hour. Smooth the model with your finger and a little water.\u003c\/li\u003e\u003cli\u003eAfter 24 hours at 20 °C the clay is fully cured. You can paint it wet or dry.\u003c\/li\u003e\u003cli\u003eRemove uncured residue with soap and water.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints of attention\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Rub a little olive oil on your hands beforehand and dip your tools in cold water; the clay sticks less and you keep more detail.\u003c\/li\u003e\u003cli\u003e✓ If the clay is still too sticky after mixing, wait about 5 minutes. It becomes less sticky over time.\u003c\/li\u003e\u003cli\u003e✓ Wear a dust mask when sanding cured clay.\u003c\/li\u003e\u003cli\u003e✓ Store closed in a dry place between 6 and 28 °C.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which Apoxie suits your project, or looking for a larger pack size? Email us at info@siliconesandmore.com and we will gladly help.\u003c\/p\u003e","brand":"Aves","offers":[{"title":"1\/4 lb. (113.4 grams)","offer_id":49531882930517,"sku":"A11271","price":14.95,"currency_code":"EUR","in_stock":false},{"title":"1 lb (454 grams)","offer_id":49531882963285,"sku":"A11272","price":31.95,"currency_code":"EUR","in_stock":false},{"title":"3 lb (1.36 kg.)","offer_id":49531882996053,"sku":"A11273","price":59.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/aves-apoxie-super-white-48098054144341.jpg?v=1727353665"},{"product_id":"chavant-clay-nsp-906-gram","title":"Chavant NSP – Sulphur-Free Modelling Clay for Sculpting, Special Effects \u0026 Mould Making","description":"\u003ch2\u003eSulphur-free plasteline for fine detail and mould making\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eChavant NSP\u003c\/strong\u003e is a sulphur-free, non-drying, wax-based modelling clay from the American manufacturer Chavant. It stays workable indefinitely, holds very fine detail and, according to Chavant, is silicone and solvent friendly. That means you can make a mould straight off your clay model. NSP can be warmed to soften it and becomes liquid from about 97 °C, so you can also pour it. Available in three grades: Soft, Medium and Hard.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSulphur-free:\u003c\/strong\u003e silicone friendly according to Chavant, so you can mould directly.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not dry out:\u003c\/strong\u003e work on the same model for days or weeks.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e suitable for crisp lines and skin textures.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eReusable and meltable:\u003c\/strong\u003e warm, melt and pour it again.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eThree grades:\u003c\/strong\u003e Soft for fast build-up, Hard for sharp detail.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpting and modelling in the studio\u003c\/li\u003e\u003cli\u003e✓ Special effects, masks and prosthetic design\u003c\/li\u003e\u003cli\u003e✓ Master models for silicone moulding\u003c\/li\u003e\u003cli\u003e✓ Cast copies of a model using molten clay\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWarm the clay to make it more pliable; Soft softens from about 49 °C, Medium from about 52 °C and Hard from about 54 °C.\u003c\/li\u003e\u003cli\u003eModel and finish with sculpting tools. Brushing works at about 85 °C, a trowel or spatula at about 80 °C.\u003c\/li\u003e\u003cli\u003eTo pour, melt the clay to about 97 °C.\u003c\/li\u003e\u003cli\u003eRemove clay residue from tools and surfaces with naphtha or 99 % isopropyl alcohol.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints of attention\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ When working with addition-cure (platinum) silicones, always do a small test on a piece of clay first.\u003c\/li\u003e\u003cli\u003e✓ Do not overheat the clay and do not use an open flame.\u003c\/li\u003e\u003cli\u003e✓ Store opened clay airtight or wrapped in plastic and away from light to prevent oxidation.\u003c\/li\u003e\u003cli\u003e✓ Unopened shelf life is 2 years at room temperature, away from sun and UV light.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which grade or which silicone system suits your model? Email us at info@siliconesandmore.com and we will gladly help.\u003c\/p\u003e","brand":"Chavant","offers":[{"title":"Soft Red-Brown 906  gramm (2 lbs)","offer_id":49531883028821,"sku":"A10276","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Medium Grey-Green 906  grams (2 lbs)","offer_id":49531883061589,"sku":"A10278","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Medium Red-Brown 906  grams (2 lbs)","offer_id":49531883094357,"sku":"A10788","price":17.99,"currency_code":"EUR","in_stock":false},{"title":"Hard Red-Brown 906  grams (2 lbs)","offer_id":49531883127125,"sku":"A10279","price":17.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/chavant-chavant-clay-nsp-906-gram-48098055815509.jpg?v=1727353760"},{"product_id":"monster-clay-gray","title":"Monster Clay Grey – Reusable Sulphur-Free Modelling Clay for Sculpting \u0026 Special Effects","description":"\u003ch2\u003eReusable, sulphur-free modelling clay for sculpting and special effects\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMonster Clay® Premium Grade grey\u003c\/strong\u003e is a reusable, sulphur-free, oil-based modelling clay from The Monster Makers. The clay does not dry out, does not stick to skin or tools and has high elasticity, so you can also create unusual shapes. Monster Clay melts at 57.2 °C, so you can also melt and cast it. Up to 46 °C it remains comfortably kneadable. You can choose from Soft, Medium and Hard, in a 2.05 kg (4.5 lbs) oven-safe container.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eSulphur-free:\u003c\/strong\u003e compatible with silicone, so suitable for mould making.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not dry out:\u003c\/strong\u003e reuse the clay as often as you like.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow melting point:\u003c\/strong\u003e melts at 57.2 °C, so you can also cast the clay.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDoes not stick:\u003c\/strong\u003e to skin or tools.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eHigh elasticity:\u003c\/strong\u003e for unusual and detailed shapes.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpting and modelling\u003c\/li\u003e\u003cli\u003e✓ Special effects, masks and props\u003c\/li\u003e\u003cli\u003e✓ Master models for moulding with silicone\u003c\/li\u003e\u003cli\u003e✓ Casting the clay in moulds of silicone, alginate or polyurethane\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWarm the clay slightly to soften it, preferably in a bain-marie or in the oven. Up to 46 °C it remains comfortably kneadable.\u003c\/li\u003e\u003cli\u003eModel with your hands or with tools.\u003c\/li\u003e\u003cli\u003eRefine details by warming areas locally, for example with a hair dryer or heat lamp. At room temperature the original hardness returns.\u003c\/li\u003e\u003cli\u003eFor a smooth finish, use alcohol, citrus solvent or turpentine.\u003c\/li\u003e\u003cli\u003eTo cast, melt the clay (melting temperature 57.2 °C) and pour it into a mould of silicone, alginate or polyurethane.\u003c\/li\u003e\u003cli\u003eLet the clay cool and reuse it as often as needed.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Do not use a microwave. The clay melts from the inside, so you do not see the molten clay straight away. This can cause serious burns and a fire hazard.\u003c\/li\u003e\u003cli\u003e✓ Never melt the clay in a pan on a direct heat source such as a gas hob, open fire or induction hob. Use a bain-marie or the oven.\u003c\/li\u003e\u003cli\u003e✓ Do not place the container directly on an oven rack or baking tray, but for example on a silicone baking mat. The container is oven-safe up to 120 °C.\u003c\/li\u003e\u003cli\u003e✓ Not suitable for consumption. Keep the clay out of the reach of children and wash your hands with soap and water after use.\u003c\/li\u003e\u003cli\u003e✓ Store the clay in a closed container in a cool, dry, frost-free place. It then keeps for at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which hardness best suits your project? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"The Monster Makers","offers":[{"title":"Gray Soft  4.5 lbs \/ 2.05 kg.","offer_id":49531884077397,"sku":"A11352","price":44.95,"currency_code":"EUR","in_stock":false},{"title":"Gray Medium  4.5 lbs \/ 2.05 kg.","offer_id":49531884110165,"sku":"A10575","price":44.95,"currency_code":"EUR","in_stock":false},{"title":"Gray Hard  4.5 lbs \/ 2.05 kg.","offer_id":49531884142933,"sku":"A10353","price":44.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/the-monster-makers-monster-clay-grijs-48098052735317.jpg?v=1727353564"},{"product_id":"wax-gietwas-art","title":"Remet Casting Wax Art Red – Highly Detailed Slush Casting Wax for Art Casting \u0026 Lost Wax","description":"\u003ch2\u003eRed casting wax for slush casting and the lost-wax process\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Casting Wax Art Red\u003c\/strong\u003e is a casting wax for artists and bronze founders. You can easily fill a mould with it yourself or build up a hollow wax shell by slush casting. You then deliver the wax pattern to a foundry for the lost-wax process. The wax picks up fine detail, keeps its shape during demoulding and does not sag in summer. The melting point is 66 °C and you work it at 60 to 70 °C.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e accurately reproduces fine detail from the mould.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e does not sag in summer and can be worked with tools after casting.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBurns out cleanly:\u003c\/strong\u003e ash content max. 0.030%.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e easy to dose, not sticky and not grainy.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Slush casting of hollow wax patterns\u003c\/li\u003e\u003cli\u003e✓ Solid casting of moulds\u003c\/li\u003e\u003cli\u003e✓ Wax patterns for bronze foundries (lost-wax process)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax at approx. 70 °C.\u003c\/li\u003e\u003cli\u003ePour the wax into an open mould.\u003c\/li\u003e\u003cli\u003eLet the wax set briefly and pour back the still-liquid wax. A thin wax shell remains.\u003c\/li\u003e\u003cli\u003eRepeat until the shell has the required thickness.\u003c\/li\u003e\u003cli\u003eFinish the pattern with tools if needed.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your mould or casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531885355349,"sku":"S10315","price":14.9,"currency_code":"EUR","in_stock":true},{"title":"3 kg. bucket","offer_id":49531885388117,"sku":"S10466","price":41.85,"currency_code":"EUR","in_stock":true},{"title":"25 kg","offer_id":49531885420885,"sku":"A10285","price":337.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-gietwas-art-rood-49358449803605.png?v=1739425471"},{"product_id":"wax-penseel-was","title":"Remet Brush Wax Purple – Brushable Detail Wax for the First Layer in Large Moulds","description":"\u003ch2\u003eBrushable wax for a detailed first layer\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Brush Wax\u003c\/strong\u003e is a purple wax that you brush into the mould as the first, detailed layer. It is suitable for small to very large moulds, picks up fine detail and is easy to use. Thanks to its higher melting point of 74 °C, the wax stays firm even in summer. You then reinforce the wax shell with a backing layer, such as \u003ca href=\"\/en\/products\/wax-casting-wax-back-up\"\u003eRemet Backup Wax\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e picks up fine detail from the mould.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBrushable:\u003c\/strong\u003e easy to brush into the mould.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e does not sag, even in summer.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePleasant to work:\u003c\/strong\u003e not sticky and not grainy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e pea-sized, easy to dose.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ First layer (face coat) in small to very large moulds\u003c\/li\u003e\u003cli\u003e✓ Hollow wax patterns for art casting and the lost-wax process\u003c\/li\u003e\u003cli\u003e✓ Combined with a backing layer of backup wax\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax at approx. 75 °C. The ideal processing temperature is 71 to 82 °C.\u003c\/li\u003e\u003cli\u003eBrush the wax into the open mould.\u003c\/li\u003e\u003cli\u003eReinforce the wax layer by pouring a firm backing wax behind it at a slightly lower temperature.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Store the wax cool, dry and frost-free. Stored this way, it keeps for at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure how best to combine brush wax and backing layer? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531885453653,"sku":"S10432","price":19.0,"currency_code":"EUR","in_stock":true},{"title":"3 kg. bucket","offer_id":49531885486421,"sku":"S10471","price":50.0,"currency_code":"EUR","in_stock":true},{"title":"25 kg","offer_id":49531885519189,"sku":"A10212","price":372.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-penseel-was-48098053718357.jpg?v=1727353640"},{"product_id":"plasticine","title":"Plasticine","description":"\u003cp\u003eA synthetic putty which remains soft in contrast to normal clay. Plasticine is used, among other things, as a replacement for clay or wax, in order to model, but also to seal seams and cracks in a casting mold or to fill up dents caused by air bubbles\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eRemains soft\u003c\/li\u003e\r\n\u003cli\u003eAvailable in many colors\u003c\/li\u003e\r\n\u003cli\u003eChild Friendly\u003c\/li\u003e\r\n\u003cli\u003eIn oven completely meltable\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003eFor platinum curing silicone, we recommend to use \"Plasticine for platinum\".\u003c\/p\u003e\r\n\u003cp\u003eNormal plasticine can prevent hardening of addition curing (platinum) silicone. For addition curing silicones we recommend  the use of the plasticine for platinum. You can find this version of plasticine in the drop down box denoted as grey addition.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eprocessing\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePutty: as modeling mass it is best to use this produt at room temperature (20-25°C)\u003c\/li\u003e\r\n\u003cli\u003eSeal: to seal gaps or seams it is best to use the plasticine at 25 ot 30°C so it is nice and soft and easy to push into cracks and holes.\u003c\/li\u003e\r\n\u003cli\u003eRepair: for repairing or sealing of air bubbles, for example in a wax model, one can best process the plasticine at 35-40°C.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eDurability\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eProvided that the plasticine is kept in closed containers under cool and dry conditions, the shelf life is at least 5 years.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003eAs far as we know now the dough is harmless to humans and the environment.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eProduct Information\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Product%20Information%20Plasticine.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003eInformatieblad plasticine\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/docs.nedform.com\/DOC\/EN\/EN%20-%20Manual%20Making%20a%20two%20piece%20mould.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/pdf-download-small-v2.png?v=1726531275\" width=\"50\" height=\"50\" \/\u003eManual for making a two-piece mould\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Huismerk - SAM","offers":[{"title":"1 Kg. Gray (Addition)","offer_id":49531885683029,"sku":"A10185","price":9.5,"currency_code":"EUR","in_stock":true},{"title":"1 Kg. Purple","offer_id":49531885715797,"sku":"A10192","price":9.5,"currency_code":"EUR","in_stock":true},{"title":"1 Kg. Red","offer_id":49531885748565,"sku":"A10189","price":9.5,"currency_code":"EUR","in_stock":true},{"title":"1 Kg. Blue","offer_id":49531885781333,"sku":"A10186","price":9.5,"currency_code":"EUR","in_stock":true},{"title":"1 Kg. Yellow","offer_id":49531885814101,"sku":"A10187","price":9.5,"currency_code":"EUR","in_stock":true},{"title":"1 Kg. Green","offer_id":49531885846869,"sku":"A10188","price":9.5,"currency_code":"EUR","in_stock":true},{"title":"1 Kg. White","offer_id":49531885912405,"sku":"A10190","price":9.5,"currency_code":"EUR","in_stock":true},{"title":"1 Kg. Black","offer_id":49531885977941,"sku":"A10191","price":9.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/huismerk-sam-plasticine-48098058895701.jpg?v=1757510034"},{"product_id":"wax-boetseerwas-matig-hard","title":"Remet Modelling Wax Medium Hard – Kneadable Modelling Wax for Sculpture \u0026 the Lost-Wax Process","description":"\u003ch2\u003eMedium-hard modelling wax for sculpture and the lost-wax process\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Modelling Wax Medium Hard\u003c\/strong\u003e is a medium-hard modelling wax for art and sculpture. You shape the wax by hand or work it with modelling tools. The wax does not stick and is neither grainy nor greasy. Because it is firm, it hardly deforms during demoulding or storage. It is also suitable for the lost-wax process. The melting point is 65 °C and it is best worked at 30 to 40 °C.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e hardly deforms during demoulding or storage.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePleasant to work:\u003c\/strong\u003e does not stick and is neither grainy nor greasy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eKneadable at low temperature:\u003c\/strong\u003e easy to shape around body temperature, ideal at 30 to 40 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFor the lost-wax process:\u003c\/strong\u003e you model directly in wax.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpture\u003c\/li\u003e\u003cli\u003e✓ Wax patterns for the lost-wax process and art casting\u003c\/li\u003e\u003cli\u003e✓ Detail work with modelling tools\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eDivide the wax into smaller pieces if needed.\u003c\/li\u003e\u003cli\u003eWarm the wax in an oven at a maximum of 40 °C so that it is easier to knead. A warm lamp or another nearby heat source also works.\u003c\/li\u003e\u003cli\u003eMake sure the wax does not get too warm. Otherwise it becomes too soft or even liquid.\u003c\/li\u003e\u003cli\u003eShape the wax by hand or work it with modelling tools.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 5 years.\u003c\/li\u003e\u003cli\u003e✓ If you want a firmer wax, choose \u003ca href=\"\/en\/products\/wax-modeling-hard\"\u003eRemet Modelling Wax Hard\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which hardness best suits your sculpture or casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531886207317,"sku":"S10311","price":19.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-boetseerwas-matig-hard-48098058699093.jpg?v=1727353886"},{"product_id":"epoxy-steunkap-glasfiber-set","title":"Epoxy Support Shell Glass Fibre Set – Kneadable Epoxy for Rigid Jackets around Brush-on Silicone Moulds","description":"\u003ch2\u003eKneadable glass fibre epoxy for a rigid support shell around your silicone mould\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eEpoxy Support Shell Glass Fibre Set\u003c\/strong\u003e is a two-component epoxy with glass fibre that you use to make a rigid support shell (mother mould) around a silicone mould. Component A is a grey-white kneadable paste, component B a blue liquid. After kneading, you roll the mass out into a sheet and press it over the cured silicone mould. The support shell holds the flexible mould in shape during casting, so you can work with a thin layer of silicone. You have 20 to 30 minutes of working time and the epoxy is cured after 10 to 12 hours.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eKneadable:\u003c\/strong\u003e you shape the mass over the mould by hand.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eGlass fibre reinforced:\u003c\/strong\u003e a rigid shell that keeps the silicone mould in shape.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEven thickness:\u003c\/strong\u003e rolls out between battens to a sheet of approximately 3 to 5 mm.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSaves silicone:\u003c\/strong\u003e a thin brush-on mould with a support shell instead of a solid block mould.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCan be finished:\u003c\/strong\u003e you can sand the cured shell for a smoother surface.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Support shells around brush-on silicone moulds\u003c\/li\u003e\u003cli\u003e✓ Moulds of ornaments, decorative concrete and sculptures\u003c\/li\u003e\u003cli\u003e✓ Feet on larger moulds, kneaded from fresh epoxy and attached to the shell\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWeigh component A onto a piece of film and add component B in the correct ratio.\u003c\/li\u003e\u003cli\u003eWearing gloves, knead thoroughly until you have an even mass without streaks.\u003c\/li\u003e\u003cli\u003ePlace the mass between two layers of film, put a batten on each side and roll the mass out with a rolling pin into a sheet of even thickness.\u003c\/li\u003e\u003cli\u003eRemove the top film, drape the sheet over the cured silicone mould with the film side facing out and press it down everywhere, with no air between silicone and epoxy. Then remove the outer film as well.\u003c\/li\u003e\u003cli\u003eLet the sheets overlap by about 1 cm and massage the seams together well.\u003c\/li\u003e\u003cli\u003eLet the epoxy cure, then carefully remove the support shell from the silicone mould.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Do not mix more epoxy than you can use within the working time of 20 to 30 minutes.\u003c\/li\u003e\u003cli\u003e✓ Always wear gloves. Cured epoxy is difficult to remove from skin and work surfaces.\u003c\/li\u003e\u003cli\u003e✓ Once cured, the support shell withstands temperatures up to approximately 50 °C.\u003c\/li\u003e\u003cli\u003e✓ Store the support shell with the silicone mould so that the mould always keeps its correct shape.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure how best to build up the support shell for your mould? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Trias Chem srl","offers":[{"title":"1,050 Kg Set","offer_id":49979080737109,"sku":"S11674","price":46.05,"currency_code":"EUR","in_stock":true},{"title":"9.5 kg Set","offer_id":49531886534997,"sku":"S10324","price":199.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/trias-chem-srl-epoxy-steunkap-glasvezel-set-professionele-2-componen-48098054570325.jpg?v=1758787454"},{"product_id":"wax-microcrystalline-pastilles","title":"Remet Microcrystalline Wax LMP Pastilles – Flexible Base \u0026 Blending Wax for Art Casting","description":"\u003ch2\u003eFlexible microcrystalline wax in pastilles\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMicrocrystalline Wax LMP\u003c\/strong\u003e in pastilles is a flexible base wax for art casters. You use it as a casting wax or as a blending wax: blending it into other waxes lets you adjust their melting temperature and plasticity. Blended with \u003ca href=\"\/en\/products\/wax-casting-wax-artcast\"\u003eRemet Casting Wax Art Red\u003c\/a\u003e, it makes that red casting wax more flexible. The melting point is 68 °C.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFlexible:\u003c\/strong\u003e also makes a blend with other waxes more flexible.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBase wax:\u003c\/strong\u003e can be used on its own as a casting wax.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBlending wax:\u003c\/strong\u003e adjusts the melting temperature and plasticity of other waxes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e easy to dose.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e less than 0.03% after burnout.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Casting wax for art casting and the lost-wax process\u003c\/li\u003e\u003cli\u003e✓ Blending wax to make Casting Wax Art Red and other casting waxes more flexible\u003c\/li\u003e\u003cli\u003e✓ Your own wax formulations\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax at approx. 70 °C.\u003c\/li\u003e\u003cli\u003ePour the wax into an open mould. As a professional caster, you do this under pressure or vacuum to prevent air bubbles.\u003c\/li\u003e\u003cli\u003eUse the wax pattern in the lost-wax process.\u003c\/li\u003e\u003cli\u003eIf you want to blend, add the wax to other casting waxes according to your own recipe.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure about the blending ratio with other waxes? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531887124821,"sku":"S10396","price":14.5,"currency_code":"EUR","in_stock":false},{"title":"3 kg. bucket","offer_id":49531887157589,"sku":"S10469","price":41.0,"currency_code":"EUR","in_stock":false},{"title":"20 kg","offer_id":49531887190357,"sku":"A10393","price":261.91,"currency_code":"EUR","in_stock":false},{"title":"1000 kg","offer_id":49531887255893,"sku":"A10393","price":5808.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-microcrystalline-pastilles-lmp-48098058600789.jpg?v=1727353886"},{"product_id":"wax-microcrystalline-lmp","title":"Remet Microcrystalline Wax LMP Slab – Flexible Base Wax for Casting \u0026 Blending","description":"\u003ch2\u003eFlexible microcrystalline base wax for casting and blending\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eMicrocrystalline Wax LMP\u003c\/strong\u003e is a flexible base wax in slabs, developed as an alternative to Shellwax LMP. Art casters use it as a casting wax or as a blending wax. Blending it into other waxes lets you adjust their melting temperature and plasticity. For example, it makes \u003ca href=\"\/en\/products\/wax-casting-wax-artcast\"\u003eRemet Casting Wax Art Red\u003c\/a\u003e more flexible. The melting point is between 64 and 71 °C.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFlexible:\u003c\/strong\u003e even after blending with other waxes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBase wax:\u003c\/strong\u003e can be used on its own as a casting wax.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBlending wax:\u003c\/strong\u003e adjusts the melting temperature and plasticity of other waxes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e suitable for detailed wax patterns.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e less than 0.03% after burnout.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Casting wax for art casting and the lost-wax process\u003c\/li\u003e\u003cli\u003e✓ Blending wax to make other casting waxes more flexible\u003c\/li\u003e\u003cli\u003e✓ Your own wax formulations\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax at approx. 70 °C.\u003c\/li\u003e\u003cli\u003ePour the wax into an open mould. As a professional caster, you do this under pressure or vacuum to prevent air bubbles.\u003c\/li\u003e\u003cli\u003eUse the wax pattern in the lost-wax process.\u003c\/li\u003e\u003cli\u003eIf you want to blend, add the wax to other casting waxes according to your own recipe.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure about the blending ratio with other waxes? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531888959829,"sku":"S10460","price":9.15,"currency_code":"EUR","in_stock":false},{"title":"500 kg","offer_id":49531888992597,"sku":"A10135","price":4116.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-microcrystalline-lmp-plaat-48098058535253.jpg?v=1727353886"},{"product_id":"wax-boetseerwas-hard","title":"Remet Modelling Wax Hard – Firm Modelling Wax for Sculpture \u0026 the Lost-Wax Process","description":"\u003ch2\u003eHard modelling wax for sculpture and the lost-wax process\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Modelling Wax Hard\u003c\/strong\u003e is a hard modelling wax for art and sculpture. You shape the wax by hand or work it with modelling tools. The wax does not stick and is neither grainy nor greasy. Because it is firm, it hardly deforms during demoulding or storage. It is also suitable for the lost-wax process. The melting point is 70 °C and it is best worked at 30 to 40 °C.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e hardly deforms during demoulding or storage.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePleasant to work:\u003c\/strong\u003e does not stick and is neither grainy nor greasy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eKneadable at low temperature:\u003c\/strong\u003e easy to shape around body temperature, ideal at 30 to 40 °C.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFor the lost-wax process:\u003c\/strong\u003e you model directly in wax.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpture\u003c\/li\u003e\u003cli\u003e✓ Wax patterns for the lost-wax process and art casting\u003c\/li\u003e\u003cli\u003e✓ Detail work with modelling tools\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eDivide the wax into smaller pieces if needed.\u003c\/li\u003e\u003cli\u003eWarm the wax in an oven at a maximum of 40 °C so that it is easier to knead. A warm lamp or another nearby heat source also works.\u003c\/li\u003e\u003cli\u003eMake sure the wax does not get too warm. Otherwise it becomes too soft or even liquid.\u003c\/li\u003e\u003cli\u003eShape the wax by hand or work it with modelling tools.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 5 years.\u003c\/li\u003e\u003cli\u003e✓ If you want a slightly softer wax, choose \u003ca href=\"\/en\/products\/wax-modeling-wax-medium-hard\"\u003eRemet Modelling Wax Medium Hard\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which hardness best suits your sculpture or casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531889123669,"sku":"S10312","price":23.95,"currency_code":"EUR","in_stock":true},{"title":"box [28 kg]","offer_id":50043486568789,"sku":"","price":624.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-boetseerwas-hard-48098058731861.jpg?v=1727353886"},{"product_id":"wax-parafine-b600","title":"Remet Paraffin Wax B600 – White Base Wax for Casting \u0026 Blending with Other Waxes","description":"\u003ch2\u003eWhite paraffin wax as a base and blending wax\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Paraffin Wax B600\u003c\/strong\u003e is a white base wax in pastilles. You use it as a casting wax or blend it with other waxes to adjust their melting temperature and plasticity. Paraffin wax is somewhat weaker and shrinks more than microcrystalline wax, and is often whiter. The melting point is 64 °C.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eBase wax:\u003c\/strong\u003e can be used on its own as a casting wax.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBlending wax:\u003c\/strong\u003e adjusts the melting temperature and plasticity of other waxes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWhite:\u003c\/strong\u003e whiter than microcrystalline wax.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e easy to dose.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e less than 0.03% after burnout.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Casting wax for the lost-wax process\u003c\/li\u003e\u003cli\u003e✓ Blending wax to your own recipe, for example with \u003ca href=\"\/en\/products\/wax-casting-wax-artcast\"\u003eRemet Casting Wax Art Red\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e✓ Your own wax formulations for art casting\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax at approx. 70 °C.\u003c\/li\u003e\u003cli\u003ePour the wax into an open mould. As a professional caster, you do this under pressure or vacuum to prevent air bubbles.\u003c\/li\u003e\u003cli\u003eUse the wax pattern in the lost-wax process.\u003c\/li\u003e\u003cli\u003eIf you want to blend, add the wax to other casting waxes according to your own recipe.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This wax is not suitable for indoor candles.\u003c\/li\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Store the wax cool, dry and frost-free. Stored this way, it keeps for at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure about the blending ratio with other waxes? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531889549653,"sku":"S10191","price":10.62,"currency_code":"EUR","in_stock":true},{"title":"3 kg. bucket","offer_id":49531889582421,"sku":"S10465","price":31.65,"currency_code":"EUR","in_stock":true},{"title":"25 kg","offer_id":49531889615189,"sku":"A10426","price":235.47,"currency_code":"EUR","in_stock":true},{"title":"1000 kg","offer_id":49531889647957,"sku":"A10426","price":8745.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-paraffine-b600-48098058404181.jpg?v=1727353866"},{"product_id":"wax-gietwas-voor-sieraden","title":"Remet Jewellery Casting Wax Blue – Highly Detailed Wax for Rings, Pendants \u0026 Earrings","description":"\u003ch2\u003eBlue casting wax for small jewellery\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eRemet Jewellery Casting Wax\u003c\/strong\u003e is a blue casting wax for small jewellery such as rings, pendants and earrings. The wax reproduces detail very accurately and is suitable for casting in silicone moulds and in small pressure chambers. It sets quickly, so you can keep working, and is flexible enough to remove from a flexible mould without damage. The melting point is 75 °C and the congealing point 66 °C.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e reproduces fine detail very accurately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSets quickly:\u003c\/strong\u003e so you can keep working.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSlightly flexible:\u003c\/strong\u003e penetration 8 dmm at 25 °C, releases well from a flexible mould.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLow ash content:\u003c\/strong\u003e max. 0.03%.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePastilles:\u003c\/strong\u003e easy to dose.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Rings, pendants and earrings\u003c\/li\u003e\u003cli\u003e✓ Casting in silicone moulds\u003c\/li\u003e\u003cli\u003e✓ Casting in small pressure chambers\u003c\/li\u003e\u003cli\u003e✓ Wax patterns for the lost-wax process in flasks\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax at approx. 75 °C.\u003c\/li\u003e\u003cli\u003ePour the wax into an open mould. As a professional caster, you do this under pressure or vacuum to prevent air bubbles.\u003c\/li\u003e\u003cli\u003eLet the wax set and remove the pattern from the flexible mould.\u003c\/li\u003e\u003cli\u003eUse the wax pattern in the lost-wax process in flasks.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Never heat the wax above 100 °C. This can permanently change the properties of the wax.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not breathe in fumes or smoke.\u003c\/li\u003e\u003cli\u003e✓ Shelf life: at least 5 years.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which wax best suits your jewellery or casting process? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Remet","offers":[{"title":"1 kg","offer_id":49531889910101,"sku":"S10381","price":21.59,"currency_code":"EUR","in_stock":false},{"title":"3 kg. bucket","offer_id":49531889942869,"sku":"S10515","price":58.64,"currency_code":"EUR","in_stock":true},{"title":"25 kg","offer_id":49531889975637,"sku":"A10287","price":429.85,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/remet-wax-gietwas-voor-sieraden-49358449901909.png?v=1739425471"},{"product_id":"apoxie-clay","title":"Aves Apoxie Clay – Self-Hardening Epoxy Clay for Sculpting, Restoration \u0026 Model Making","description":"\u003ch2\u003eSelf-hardening epoxy clay with a clay-like texture for sculpting and restoration\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAves Apoxie Clay\u003c\/strong\u003e is a two-part epoxy clay that combines the workability of modelling clay with the strength and adhesion of epoxy. You knead equal parts A and B together for 2 minutes and then have 1 to 3 hours of working time. The clay hardens at room temperature without an oven and is fully cured after 24 hours, with 0 % shrinkage and a semi-gloss finish. Apoxie Clay has a slightly coarser texture than \u003ca href=\"\/en\/products\/apoxiesculpt\"\u003eApoxie Sculpt\u003c\/a\u003e, which makes it well suited to larger objects. You can choose between Native and White.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eClay-like consistency:\u003c\/strong\u003e holds detail and is easy to sculpt and smooth.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSelf-hardening:\u003c\/strong\u003e no oven needed, fully cured after 24 hours.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003e0 % shrinkage:\u003c\/strong\u003e no shrinking or cracking during curing.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStrong adhesion:\u003c\/strong\u003e bonds to itself, other epoxies, porcelain, ceramics, metal, vinyl, hard plastics, foam, fibreglass and wood.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWater resistant:\u003c\/strong\u003e also suitable for outdoor displays and freeze-thaw stable.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasy to finish:\u003c\/strong\u003e once cured it can be sanded, drilled, tapped, sawn, turned and painted.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculpting and embellishing\u003c\/li\u003e\u003cli\u003e✓ Miniatures, models and customising\u003c\/li\u003e\u003cli\u003e✓ Seam filling and restoration\u003c\/li\u003e\u003cli\u003e✓ Outdoor displays\u003c\/li\u003e\u003cli\u003e✓ Mixed media, assemblage and prototyping\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWear suitable gloves, for example nitrile.\u003c\/li\u003e\u003cli\u003eTake equal parts A and B and knead for 2 minutes until the colour is uniform.\u003c\/li\u003e\u003cli\u003eLet the mass rest for about 5 minutes; it will then be easier to handle. If it is still too sticky, wait a little longer. The longer you wait, the less the clay sticks and the sharper the detail.\u003c\/li\u003e\u003cli\u003eSculpt within 1 to 3 hours. Smooth with a wet finger, brush or sculpting tool.\u003c\/li\u003e\u003cli\u003eLet the clay cure at room temperature and do not bake it. After 24 hours it is fully hard.\u003c\/li\u003e\u003cli\u003eThen sand, drill, stain or paint as required.\u003c\/li\u003e\u003cli\u003eRemove uncured residue with soap and water or with Aves Finishing Solution.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints of attention\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Rub a little olive oil on your hands beforehand and dip your tools in cold water; this reduces sticking.\u003c\/li\u003e\u003cli\u003e✓ According to Aves the product contains crystalline silica. Always wear a dust mask when sanding cured clay and do not breathe in the dust.\u003c\/li\u003e\u003cli\u003e✓ The unmixed components may cause an allergic skin reaction. Avoid skin contact.\u003c\/li\u003e\u003cli\u003e✓ Store closed in a dry place between 6 and 28 °C. The product is freeze-thaw stable.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which Apoxie suits your project, or looking for a larger pack size? Email us at info@siliconesandmore.com and we will gladly help.\u003c\/p\u003e","brand":"Aves","offers":[{"title":"1\/4 lb (113.4 grams) \/ 3 lb (1.36 Kg)","offer_id":49631563350357,"sku":"A11447","price":17.75,"currency_code":"EUR","in_stock":false},{"title":"1\/4 lb (113.4 grams) \/ White","offer_id":49631563448661,"sku":"a11444","price":17.75,"currency_code":"EUR","in_stock":false},{"title":"1 lb (454 grams) \/ 3 lb (1.36 Kg)","offer_id":49631563546965,"sku":"A11448","price":33.5,"currency_code":"EUR","in_stock":false},{"title":"1 lb (454 grams) \/ White","offer_id":49631563645269,"sku":"A11445","price":33.5,"currency_code":"EUR","in_stock":false},{"title":"Native \/ 3 lb (1.36 Kg)","offer_id":49631563710805,"sku":"A11449","price":59.95,"currency_code":"EUR","in_stock":false},{"title":"Native \/ White","offer_id":49631563809109,"sku":"A11446","price":59.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/aves-apoxie-clay-48315183890773.jpg?v=1727856034"},{"product_id":"zirkoon-zand-en-meel-gecalcineerd","title":"Zircon Flour and Sand calcined","description":"\u003cp\u003e\u003cstrong\u003eDiscover the Power of Zircon Sand and Flour for the Ceramic Shell Method!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAre you looking for high-quality materials for your ceramic projects? Look no further! Our zircon sand and flour offer the perfect solution for the ceramic shell method, known for its exceptional durability and aesthetic quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy choose our zircon sand and flour?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eSuperior Quality\u003c\/strong\u003e: Our zircon sand and flour are carefully selected and processed to guarantee the highest purity and consistency.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eExcellent Thermal Stability\u003c\/strong\u003e: Ideal for high-temperature applications, making your ceramic creations resistant to extreme conditions.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncreased Strength and Durability\u003c\/strong\u003e: Strengthen your ceramic products with the robust properties of zircon for a longer lifespan and better performance.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eVersatile Use\u003c\/strong\u003e: Perfect for a wide range of ceramic applications, from artworks to industrial components.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eCeramic Shells\u003c\/strong\u003e: Create beautiful, durable shells that stand the test of time.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eIndustrial Use\u003c\/strong\u003e: Ideal for making refractory materials and other industrial applications.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cp\u003e\u003cstrong\u003eArtistic Projects\u003c\/strong\u003e: Give your artworks a unique look and improved durability.\u003c\/p\u003e\n\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZircon Sand 108-13 Mesh\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTypical chemical analyses\u003cbr\u003eZrO2 66.2 %\u003cbr\u003eSiO2 32%\u003cbr\u003eFe2O3 \u0026lt; 0.06 %\u003cbr\u003eAl2O3 \u0026lt; 0.5 %\u003cbr\u003eTiO2 \u0026lt; 0.15 %\u003cbr\u003eCaO2 \u0026lt; 0.05 %\u003cbr\u003eMgO2 \u0026lt; 0.1 %\u003cbr\u003eNa2O2 \u0026lt; 0.02 %\u003cbr\u003eK2O \u0026lt; 0.02 %\u003c\/p\u003e\n\u003cp\u003ePhysical properties\u003c\/p\u003e\n\u003cp\u003eSpecific gravity [kg\/dm3] 4.6\u003cbr\u003eHardness [mohs] 7.5\u003cbr\u003eMelting point [ ºC ] 2200\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eGrain distribution\u003c\/p\u003e\n\u003cp\u003e\u0026gt; 0.315 mm ---\u003cbr\u003e\u0026gt; 0.250mm 0.04 %\u003cbr\u003e\u0026gt; 0.200mm 0.38 %\u003cbr\u003e\u0026gt; 0.150mm 7.02 %\u003cbr\u003e\u0026gt; 0.125mm 18.19 %\u003cbr\u003e\u0026gt; 0.100mm 54.52 %\u003cbr\u003e\u0026gt; 0.090mm 11.52 %\u003cbr\u003e\u0026lt; 0.090mm 8.58 %\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eZircon Flour 200 mesh\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTypical chemical and physical properties:\u003cbr\u003eChemical Analysis typical guaranteed\u003cbr\u003eProperties\u003cbr\u003eZirconia (incl. Hafnium) ZrO2 (+HfO2) typical 66.40%, guaranteed 64.00% min.\u003cbr\u003eSilicia SiO2 typical 32.60%, guaranteed 34.00% max.\u003cbr\u003eTitania TiO2 typical 0.17%, guaranteed 0.23% max.\u003cbr\u003eAluminia Al2O3 typical 0.62%, guaranteed 1.00% max.\u003cbr\u003eIron Oxide Fe2O3 typical 0.06%, guaranteed 0.10% max.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTypical physical properties:\u003cbr\u003eSpec. gravity 4.65 g\/cm3\u003cbr\u003eHardness (Mohs) 7.5\u003cbr\u003eMelting temperature 2,200° C\u003cbr\u003eMoisture 0.09%\u003cbr\u003eLoss on ignition 0.35%\u003c\/p\u003e","brand":"Nedform","offers":[{"title":"Zircon Sand 108-113 mesh calcined [25 kg]","offer_id":49917163241813,"sku":"A11856","price":138.19,"currency_code":"EUR","in_stock":false},{"title":"Zirconium flour 200 mesh calcined [25 kg]","offer_id":49917163274581,"sku":"A10218","price":118.9,"currency_code":"EUR","in_stock":true},{"title":"Quotation for larger quantities or delivery outside BeNeLux and Germany","offer_id":49917163307349,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/nedform-zirkoon-meel-en-zand-gecalcineerd-48720179265877.jpg?v=1732155988"},{"product_id":"clayrac-aluminosilicaat-stukko-en-meel","title":"Imerys Clayrac Aluminosilicate – Stucco \u0026 Flour for Ceramic Shell Moulds in Art Casting \u0026 Investment Casting","description":"\u003ch2\u003eAluminosilicate stucco and flour for the ceramic shell process\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eImerys Clayrac\u003c\/strong\u003e is a calcined aluminosilicate (chamotte) made from kaolinitic clay from the Charentes basin in France. You use it as stucco and as flour to build highly refractory and creep-resistant ceramic shell moulds, for example in art casting. Clayrac has a reliable particle size distribution and mineralogy and works in both alcohol- and water-based processes. Depending on the grade, it contains up to 45 % alumina.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHighly refractory:\u003c\/strong\u003e with high creep resistance, also for steel and titanium alloys.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDimensionally accurate:\u003c\/strong\u003e valued for its dimensional accuracy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eExcellent backup material:\u003c\/strong\u003e according to Imerys very well suited to the backup coats of the shell.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eConsistent quality:\u003c\/strong\u003e reliable particle size distribution and mineralogy.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAlcohol or water:\u003c\/strong\u003e suitable for both processes.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSeveral grain sizes:\u003c\/strong\u003e lets you build the shell more efficiently.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasy knock-out:\u003c\/strong\u003e the shell is easy to remove after casting.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Ceramic shell moulds for art foundries\u003c\/li\u003e\u003cli\u003e✓ Investment casting, including steel and titanium alloys\u003c\/li\u003e\u003cli\u003e✓ Stucco for building up the shell\u003c\/li\u003e\u003cli\u003e✓ Clayrac P 200 mesh as flour\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eUse Clayrac as stucco when building the shell, or as flour (200 mesh), in an alcohol- or water-based process.\u003c\/li\u003e\u003cli\u003eChoose the right grain size for each coat. Using different grain sizes lets you build the shell more efficiently.\u003c\/li\u003e\u003cli\u003eFor slurry composition, drying times and number of coats, follow the instructions for the binder you use.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Avoid creating dust and work with good extraction.\u003c\/li\u003e\u003cli\u003e✓ Supplied in 25 kg bags. For larger quantities or delivery outside the Benelux and Germany, request a quotation.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which grain size you need for each coat? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Imerys","offers":[{"title":"Clayrac F 45 0.1\/0.3 mm [25 kg]","offer_id":49917163340117,"sku":"A11759","price":42.31,"currency_code":"EUR","in_stock":true},{"title":"Clayrac F 41 0.2\/0.5 mm [25 kg]","offer_id":49917163372885,"sku":"A10421","price":40.0,"currency_code":"EUR","in_stock":true},{"title":"Clayrac F 45 0,5\/1 mm [25 kg]","offer_id":49917163405653,"sku":"A10423","price":47.48,"currency_code":"EUR","in_stock":true},{"title":"Clayrac F 45 P 200 mesh [25 kg]","offer_id":49917163438421,"sku":"A11703","price":49.68,"currency_code":"EUR","in_stock":true},{"title":"Quotation for larger quantities or delivery outside the Benelux and Germany","offer_id":49917163471189,"sku":"","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/imerys-clayrac-aluminosilicaat-stukko-en-meel-48720179200341.png?v=1732155988"},{"product_id":"sculptacast-sedona","title":"IPCS SculptaCast Sedona – Brown Sculpture Wax for Brushing, Slush Casting \u0026 Backup","description":"\u003ch2\u003eBrown sculpture wax for fine detail, slush casting and backup\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePrecizioned SculptaCast Sedona\u003c\/strong\u003e is a general-purpose brown sculpture wax for brushing and slush casting. Its low viscosity and good flow let you brush and slush fine details. The moderate setting speed also makes it suitable as a backup wax. Sedona has moderate stiffness, polishes well and blends easily with other sculpture waxes in the SculptaCast range. The wax is based on petroleum raw materials, has a drop melt point of 64 ± 4 °C and leaves 0.005 % ash.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFine detail:\u003c\/strong\u003e low viscosity of 14.5 cps at 93 °C and good flow.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAlso as backup:\u003c\/strong\u003e thanks to the moderate setting speed.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLess lifting from the mould wall:\u003c\/strong\u003e less curling and flaking from the wall.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003ePolishes well:\u003c\/strong\u003e moderate stiffness and high polishability.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBlendable:\u003c\/strong\u003e combine with other SculptaCast waxes for your own blend.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eClean burnout:\u003c\/strong\u003e ash content 0.005 %.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Brushing detail into a mould\u003c\/li\u003e\u003cli\u003e✓ Slush casting hollow wax patterns\u003c\/li\u003e\u003cli\u003e✓ Backup wax behind a brushed layer\u003c\/li\u003e\u003cli\u003e✓ Custom wax blends with other SculptaCast waxes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eMelt the wax carefully and do not heat it above 100 °C.\u003c\/li\u003e\u003cli\u003eBrush the first layer into the mould for the detail.\u003c\/li\u003e\u003cli\u003eBuild up the wall thickness by slushing, or use the same wax as backup.\u003c\/li\u003e\u003cli\u003eFor different properties, blend Sedona with another SculptaCast wax and test the blend first.\u003c\/li\u003e\u003cli\u003eLet the wax cool and demould the pattern.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Do not heat the wax above 100 °C and do not keep it at high temperature for long. Otherwise the product degrades thermally.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax and do not inhale the fumes.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which sculpture wax or blend best suits your pattern? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"IPCS, International Precision Casting Supplies Ltd","offers":[{"title":"SculptaCast Sedona [1 kg]","offer_id":49923622207829,"sku":"S11720","price":15.35,"currency_code":"EUR","in_stock":true},{"title":"SculptaCast Sedona [3 kg Bucket]","offer_id":49923622240597,"sku":"S11721","price":45.63,"currency_code":"EUR","in_stock":true},{"title":"SculptaCast Sedona [20 kg]","offer_id":49923622273365,"sku":"A11798","price":289.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/ipcs-international-precision-casting-supplies-ltd-sculptacast-sedona-48730436895061.jpg?v=1732266034"},{"product_id":"shellspen-suspensiepoeder","title":"Shellspen Suspension Powder – Stable Ceramic Slurry for Lost Wax Casting without Constant Stirring","description":"\u003ch2\u003eSuspension powder for a ceramic slurry you do not have to stir constantly\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eShellspen suspension powder\u003c\/strong\u003e has been developed for ceramic slurries in the lost wax process. You dry-mix the powder into the flour and add it to the binder together with the flour. This keeps the solids in suspension much longer, so periodic mixing is enough instead of constant stirring. One 250 g bag is enough for 25 kg of fused silica flour 325 mesh, or a batch of 25 kg Adbond and 25 kg flour. This yields approximately 27 to 33 litres of slurry.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eNo constant stirring:\u003c\/strong\u003e periodic mixing is enough, without a mixer running all year round.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStable slurry:\u003c\/strong\u003e the solids stay in suspension, so the slurry remains homogeneous.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eLong usable life:\u003c\/strong\u003e a slurry with Shellspen can keep for up to six months, provided you mix it briefly every week.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFull control:\u003c\/strong\u003e you make up the slurry yourself from binder, flour and Shellspen.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eBronze and aluminium:\u003c\/strong\u003e the slurry can be used for both metals.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Ceramic shell for the lost wax process\u003c\/li\u003e\u003cli\u003e✓ Smaller foundries and occasional users\u003c\/li\u003e\u003cli\u003e✓ Bronze and aluminium casting\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eTake 25 kg of fused silica flour 325 mesh (or 200 mesh).\u003c\/li\u003e\u003cli\u003eDry-mix the entire contents of one bag of Shellspen into the flour.\u003c\/li\u003e\u003cli\u003ePour 25 kg of Adbond (approximately 21 litres) into a drum of at least 30 litres, preferably 30 to 40 litres.\u003c\/li\u003e\u003cli\u003eAdd the dry mix of flour and Shellspen to the Adbond through a sieve.\u003c\/li\u003e\u003cli\u003eMix with a powerful mixer, for example a drill with a paddle mixer, until everything is homogeneous: approximately 15 to 30 minutes. Check every 5 minutes for dry grains at the bottom.\u003c\/li\u003e\u003cli\u003eLet the slurry rest for at least 1 hour, preferably overnight.\u003c\/li\u003e\u003cli\u003eSieve the slurry once more so that no lumps remain.\u003c\/li\u003e\u003cli\u003eAlways mix the slurry thoroughly before use and close the drum during storage. The full method is described in the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/Handleiding_periodiek_mengen_slurry_shellspen_NL.pdf?v=1783670495\" target=\"_blank\" rel=\"noopener\"\u003eguide to periodically mixed slurry (PDF, in Dutch)\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ This is a separate recipe with finer flour (325 mesh instead of the usual 120 or 200 mesh), not the same slurry stirred less often.\u003c\/li\u003e\u003cli\u003e✓ Start on the thin side (1:1). Thickening by adding flour is much easier than thinning a slurry that is too thick.\u003c\/li\u003e\u003cli\u003e✓ While mixing in, the slurry temporarily needs more volume than the final volume. For 27 to 33 litres of slurry, allow a drum of 30 to 40 litres.\u003c\/li\u003e\u003cli\u003e✓ If you only use part of a bag, homogenise the powder thoroughly before weighing.\u003c\/li\u003e\u003cli\u003e✓ For aluminium we recommend Clayrac (aluminium silicate) as stucco, because a full fused silica shell can be harder to remove.\u003c\/li\u003e\u003cli\u003e✓ You will find an overview of all options on the collection page \u003ca href=\"\/en\/collections\/keramische-schaal-materialen-voor-de-verloren-was-methode\"\u003eCeramic shell materials\u003c\/a\u003e.\u003c\/li\u003e\u003cli\u003e✓ Storage: close the drum of slurry and mix briefly every week; the slurry then remains usable for up to six months.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which ceramic shell build-up suits your casting work? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"Shellspen","offers":[{"title":"250 gram bag for 25 kg flour or 50 kg slurry","offer_id":49923622306133,"sku":"A11995","price":110.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/shellspen-shellspen-suspensiepoeder-48730437058901.jpg?v=1732266034"},{"product_id":"droogindicator-voor-keramische-schaal","title":"Dry indicator for the ceramic shell","description":"\u003cp\u003eAcid Yellow is a dye often used as a dry indicator in the ceramic shell method. This dye changes color when the slurry dries, which helps to monitor the drying process and determine when the next layer can be applied. This is particularly useful in the lost wax method, where multiple layers of slurry and sand are applied to form a strong, heat-resistant shell.\u003c\/p\u003e\n\u003cp\u003eThe dye allows you to visually see when the slurry is completely dry, which is essential for obtaining a uniform and consistent shell. This makes the process more efficient and reduces the chance of errors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTypically, 100 ml of dry indicator is enough for 25 liters of adbond binder or 50 liters of slurry\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis dye is a salt and can affect the stability of the slurry. We advise against its use for beginners.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Nedform","offers":[{"title":"1 bottle yellow dryness indicator liquid [1 Liter]","offer_id":49923622338901,"sku":"S11604","price":42.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/nedform-droogindicator-keramische-schaal-48730436927829.jpg?v=1732266034"},{"product_id":"apoxie-sculpt","title":"Aves Apoxie Sculpt – Self-Hardening Epoxy Clay for Sculpting, Model Making \u0026 Restoration","description":"\u003ch2\u003eSelf-hardening epoxy clay for sculpting, model making and restoration\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAves Apoxie Sculpt\u003c\/strong\u003e is a two-part epoxy clay that combines the mouldability of modelling clay with the strength and adhesion of epoxy. You knead equal parts A and B together for 2 minutes and then have 1 to 3 hours of working time. Apoxie Sculpt hardens at room temperature without an oven and is hard and waterproof after 24 hours, with 0 % shrinkage and a semi-gloss finish. You can choose from various colours, which can also be intermixed.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eMouldable like clay:\u003c\/strong\u003e sculpt, cut, stamp and add texture.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eSelf-hardening:\u003c\/strong\u003e no oven needed, hard and waterproof after 24 hours.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003e0 % shrinkage:\u003c\/strong\u003e no shrinking or cracking.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eStrong adhesion:\u003c\/strong\u003e bonds to itself, other epoxies, ceramics, metal, wood, stone, glass, plastics, foam and fibreglass.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eEasy to finish:\u003c\/strong\u003e once cured it can be sanded, drilled, filed and painted.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eFreeze-thaw stable:\u003c\/strong\u003e also suitable for outdoor displays.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Sculptures, miniatures and dolls\u003c\/li\u003e\u003cli\u003e✓ Jewellery, cosplay, props and set decoration\u003c\/li\u003e\u003cli\u003e✓ Restoration and repair of ceramics, porcelain and antiques\u003c\/li\u003e\u003cli\u003e✓ Model making and prototypes\u003c\/li\u003e\u003cli\u003e✓ Seam filling, bonding and woodworking\u003c\/li\u003e\u003cli\u003e✓ Aquarium decoration\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eWear gloves. Measure equal parts A and B, preferably with separate tools.\u003c\/li\u003e\u003cli\u003eKnead for 2 minutes until the colour is uniform.\u003c\/li\u003e\u003cli\u003eLet the mass rest for about 5 minutes; it will then be easier to handle.\u003c\/li\u003e\u003cli\u003eSculpt within 1 to 3 hours. Smooth with a wet finger or brush. Dip your tools in cold water for fine detail.\u003c\/li\u003e\u003cli\u003eLet the clay cure at room temperature and do not bake it. After 24 hours it is hard and waterproof.\u003c\/li\u003e\u003cli\u003eThen sand, drill or paint as required.\u003c\/li\u003e\u003cli\u003eRemove uncured residue with soap and water or with Aves Finishing Solution.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints of attention\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ The colour Stone White is not a bright white but rather creamy. For a true white result, choose \u003ca href=\"\/en\/products\/apoxie-super-white\"\u003eApoxie Super White\u003c\/a\u003e.\u003c\/li\u003e\u003cli\u003e✓ The small 113.4 gram pack can feel hard. In that case, warm the closed jar for 5 seconds in the microwave on full power and repeat in 5-second steps if necessary. This does not affect the final quality.\u003c\/li\u003e\u003cli\u003e✓ A little olive oil on your hands stops the clay from sticking.\u003c\/li\u003e\u003cli\u003e✓ Wear a dust mask when sanding cured clay.\u003c\/li\u003e\u003cli\u003e✓ Store closed in a dry place between 6 and 28 °C. The product is freeze-thaw stable.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which Apoxie suits your project, or looking for a larger pack size? Email us at info@siliconesandmore.com and we will gladly help.\u003c\/p\u003e","brand":"Aves","offers":[{"title":"Natural \/ 1\/4 lb (113,4 gram)","offer_id":49959825211733,"sku":"A11250","price":14.75,"currency_code":"EUR","in_stock":false},{"title":"Natural \/ 1 lb (454 gram)","offer_id":49959825277269,"sku":"A11251","price":29.5,"currency_code":"EUR","in_stock":false},{"title":"Natural \/ 4 lb (1,8 kilo)","offer_id":49959825375573,"sku":"A11252","price":63.95,"currency_code":"EUR","in_stock":false},{"title":"Black \/ 1\/4 lb (113,4 gram)","offer_id":49959825441109,"sku":"A11235","price":14.75,"currency_code":"EUR","in_stock":false},{"title":"Black \/ 1 lb (454 gram)","offer_id":49959825506645,"sku":"A11236","price":29.5,"currency_code":"EUR","in_stock":false},{"title":"Black \/ 4 lb (1,8 kilo)","offer_id":49959825539413,"sku":"A11237","price":63.95,"currency_code":"EUR","in_stock":false},{"title":"Silver-Grey \/ 1\/4 lb (113,4 gram)","offer_id":49959825604949,"sku":"A11262","price":14.75,"currency_code":"EUR","in_stock":false},{"title":"Silver-Grey \/ 1 lb (454 gram)","offer_id":49959825670485,"sku":"A11263","price":29.5,"currency_code":"EUR","in_stock":false},{"title":"Silver-Grey \/ 4 lb (1,8 kilo)","offer_id":49959825736021,"sku":"A11264","price":59.95,"currency_code":"EUR","in_stock":false},{"title":"Blue \/ 1\/4 lb (113,4 gram)","offer_id":49959825801557,"sku":"A11238","price":14.75,"currency_code":"EUR","in_stock":false},{"title":"Bronze \/ 1\/4 lb (113,4 gram)","offer_id":49959826096469,"sku":"A11241","price":14.75,"currency_code":"EUR","in_stock":false},{"title":"Bronze \/ 1 lb (454 gram)","offer_id":49959826129237,"sku":"A11242","price":29.5,"currency_code":"EUR","in_stock":false},{"title":"Bronze \/ 4 lb (1,8 kilo)","offer_id":49959826227541,"sku":"A11243","price":63.95,"currency_code":"EUR","in_stock":false},{"title":"Brown \/ 4 lb (1,8 kilo)","offer_id":49959826522453,"sku":"A11246","price":59.95,"currency_code":"EUR","in_stock":false},{"title":"Orange \/ 1 lb (454 gram)","offer_id":49959826620757,"sku":"A11254","price":29.5,"currency_code":"EUR","in_stock":false},{"title":"Red \/ 1\/4 lb (113,4 gram)","offer_id":49959826915669,"sku":"A11259","price":14.0,"currency_code":"EUR","in_stock":false},{"title":"Red \/ 1 lb (454 gram)","offer_id":49959826981205,"sku":"A11260","price":28.5,"currency_code":"EUR","in_stock":false},{"title":"Red \/ 4 lb (1,8 kilo)","offer_id":49959827046741,"sku":"A11261","price":63.95,"currency_code":"EUR","in_stock":false},{"title":"Stone White \/ 1\/4 lb (113,4 gram)","offer_id":49959827112277,"sku":"A11265","price":14.75,"currency_code":"EUR","in_stock":false},{"title":"Stone White \/ 1 lb (454 gram)","offer_id":49959827177813,"sku":"A11266","price":29.5,"currency_code":"EUR","in_stock":false},{"title":"Stone White \/ 4 lb (1,8 kilo)","offer_id":49959827243349,"sku":"A11267","price":63.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/aves-apoxie-sculpt-48784872374613.png?v=1732931679"},{"product_id":"sculptaclay-brown-firm","title":"IPCS SculptaClay Brown Firm – Firm Modelling Wax for Sculpting, Detail Work \u0026 Wax Patterns","description":"\u003ch2\u003eFirm modelling wax for rough carving and fine detail\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSculptaClay Brown Firm\u003c\/strong\u003e (PZ-A 3029L) from Precizioned is a wax-based sculpting medium for modelling, detailing and creative design. The firm formulation is made for rough carving and fine detailing. Because the clay is made of wax, you can also use the model as a wax pattern in the lost wax process: the ash content is below 0.015 %. The clay comes in a 4.56 kg block.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eFirm:\u003c\/strong\u003e for rough carving, sharp edges and fine details.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eShapes by hand:\u003c\/strong\u003e softens with hand warmth or controlled heat and gradually firms up as it cools.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdheres to itself and other waxes:\u003c\/strong\u003e easy to build up, add to and repair.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned for casting:\u003c\/strong\u003e ultra-low ash content below 0.015 %.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Modelling wax patterns for the bronze foundry\u003c\/li\u003e\u003cli\u003e✓ Fine details and sharp edges\u003c\/li\u003e\u003cli\u003e✓ Repairing and adding to existing wax patterns\u003c\/li\u003e\u003cli\u003e✓ Sculpture, jewellery and prototypes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eSoften the clay with hand warmth or controlled ambient heat.\u003c\/li\u003e\u003cli\u003eShape and model by hand or with modelling tools.\u003c\/li\u003e\u003cli\u003eLet the clay cool. It gradually firms up so you can continue detailing.\u003c\/li\u003e\u003cli\u003eUse the model as a wax pattern for the lost wax process, or make a mould of it.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Heat the clay in a controlled way and do not use an open flame.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax.\u003c\/li\u003e\u003cli\u003e✓ SculptaClay comes in three grades: Red Soft (soft), Grey Medium (medium) and Brown Firm (firm).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which grade best suits your model? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"IPCS, International Precision Casting Supplies Ltd","offers":[{"title":"Brown Firm 4.56 Kg","offer_id":50767810953557,"sku":"A90527","price":83.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/ipcs-international-precision-casting-supplies-ltd-sculptaclay-brown-50535907393877.jpg?v=1747098083"},{"product_id":"sculptaclay-grey-medium","title":"IPCS SculptaClay Grey Medium – Medium Modelling Wax for Sculpting, Detail Work \u0026 Wax Patterns","description":"\u003ch2\u003eMedium modelling wax for light carving and modelling\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSculptaClay Grey Medium\u003c\/strong\u003e (PZ-A 3028M) from Precizioned is a wax-based sculpting medium for modelling, detailing and creative design. The medium formulation is ideal for light carving: easy to work while the clay keeps its structure. Because the clay is made of wax, you can also use the model as a wax pattern in the lost wax process: the ash content is below 0.015 %. The clay comes in a 4.56 kg block.\u003c\/p\u003e\u003ch3\u003eKey benefits\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eMedium hardness:\u003c\/strong\u003e easy to work yet holds its shape.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eShapes by hand:\u003c\/strong\u003e softens with hand warmth or controlled heat and gradually firms up as it cools.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdheres to itself and other waxes:\u003c\/strong\u003e easy to build up, add to and repair.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned for casting:\u003c\/strong\u003e ultra-low ash content below 0.015 %.\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Modelling wax patterns for the bronze foundry\u003c\/li\u003e\u003cli\u003e✓ Light carving and detail work\u003c\/li\u003e\u003cli\u003e✓ Repairing and adding to existing wax patterns\u003c\/li\u003e\u003cli\u003e✓ Sculpture, jewellery and prototypes\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProcessing\u003c\/h3\u003e\u003col\u003e\u003cli\u003eSoften the clay with hand warmth or controlled ambient heat.\u003c\/li\u003e\u003cli\u003eShape and model by hand or with modelling tools.\u003c\/li\u003e\u003cli\u003eLet the clay cool. It gradually firms up so you can continue detailing.\u003c\/li\u003e\u003cli\u003eUse the model as a wax pattern for the lost wax process, or make a mould of it.\u003c\/li\u003e\u003c\/ol\u003e\u003ch3\u003ePoints to note\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e✓ Heat the clay in a controlled way and do not use an open flame.\u003c\/li\u003e\u003cli\u003e✓ Avoid skin contact with molten wax.\u003c\/li\u003e\u003cli\u003e✓ SculptaClay comes in three grades: Red Soft (soft), Grey Medium (medium) and Brown Firm (firm).\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eProfessional support\u003c\/h3\u003e\u003cp\u003eNot sure which grade best suits your model? Email us at info@siliconesandmore.com and we will be happy to help.\u003c\/p\u003e","brand":"IPCS, International Precision Casting Supplies Ltd","offers":[{"title":"Grey Medium 4.56 Kg","offer_id":50767810920789,"sku":"A90525","price":83.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/ipcs-international-precision-casting-supplies-ltd-sculptaclay-grey-m-50535907459413.jpg?v=1747098084"}],"url":"https:\/\/siliconesandmore.com\/en\/collections\/was-en-boetseren.oembed","provider":"siliconesandmore","version":"1.0","type":"link"}