Back

Elastosil RT 601 very clear

  • Elastosil RT 601 very clear

In stock

  • Article code: S11680

✔ Potting automotive and optical parts
✔ Addition hardening
✔ Liquid
✔ Crystal clear
✔ Two-component 9:1
✔ Shore (A) 45

€ 104,41
€ 86,29 Excl. tax

Add to wishlist

Buy now Pay in 14 days with Klarna

  • Fast shipping! Everything available from stock
  • Buy from the specialist
  • Extended internal Laboratory
  • More than half a million satisfied customers

Product description

Elastosil RT 601 very clear

Pourable, addition-cured, two-component silicone rubber that vulcanizes at room temperature.

Main application:
- Automotive electronics
- Measuring and controlling, Sensor technology
- Optical measuring installations

Application details
- all-round potting compound
- manufacture of cast articles

Characteristics

- two-part, 9:1 mixing ratio
- low viscosity: 3,500 mPa s
- hardness Shore A 45
- excellent tensile strength 6 N/mm²
- crystal clear vulcanizate

Processing

Please note: Only components A and B with the same lot number may be processed together!

Surface preparation:

All surfaces must be clean and free of contaminants that could prevent the curing of ELASTOSIL® RT 601 A/B. Examples of inhibitory contaminants include sulfur-containing materials, plasticizers, urethanes, amine-containing materials and organometallic compounds - especially organotin compounds. If it is not known whether a substrate inhibits cure, a small scale test should be performed to determine compatibility.

To blend :

Component A of ELASTOSIL® RT 601 contains the platinum catalyst, component B the crosslinker. Even trace amounts of the platinum catalyst can lead to gelation of the component containing the crosslinker. Therefore, tools (spatulas, stirrers, etc.) used to handle the platinum-containing component or the catalyzed compound should not come into contact with this component.

The two components should be thoroughly mixed in a weight or volume ratio of 9:1. To eliminate air introduced during dispensing or trapped under components or equipment, vacuum containment is recommended.

Curing :

The curing time of additional curing silicone rubber is highly dependent on the temperature, size and heat sink properties of the part being cast. Reactivity can be adjusted within wide limits by adding Catalyst EP or Inhibitor PT 88, depending on the processing requirements of the specific application. Catalyst EP increases reactivity, i.e. pot life and curing time are shortened. Inhibitor PT 88 is a pot life extender and extends the pot life and curing time. More information can be found in our brochure "Catalyst EP/Inhibitor PT88".

We recommend performing preliminary testing to optimize conditions for the specific application.

Packaging and storage

The 'Best Before' date of each batch is stated on the product label. Storage after the date stated on the label does not necessarily mean that the product is no longer usable. However, in this case, the properties required for the intended use must be checked for quality assurance reasons.

Safety instructions

According to the latest insights, the addition-curing silicone rubber ELASTOSIL® RT 601 A/B does not contain any toxic or corrosive substances that require special precautions when handling.

TDS Technical data sheet EN Elastosil RT 601 A/B

 

SDS Technical data sheet NL Elastosil RT 601 A

SDS Technical data sheet NL Elastosil RT 601 B

Specifications

Specifications for: Elastosil RT 601 very clear

  • Shore (A) 45
  • Color A Comp. colorless, transparent
  • Color B Comp. colorless, transparent
  • end Color colorless, transparent
  • cured density 1.02 g/cm3
  • View all specifications
  • viscosity mixture 3500 mPa·s
  • Mixing ratio A/ B 9:1
  • Working Time 90 Minuten
  • Curing time 24 hours @ 23C
  • tensile strength 6 N/mm²
  • extensibility 100%
  • tear Strength
  • Linear shrinkage<0,1%
  • Curing method Addition curing (Platinum)
  • Volume resistivity 10¹⁵ Ohmcm
  • Permittivity 2.8
  • Heat capacity [Kj/Kg Kelvin] NA
  • Heat conductivity [W/mK] NA
  • Product category

Product tags

Larger quantity required?

Do you have a question about this product?

Do you have a question about this product?

Our employee is happy to help you find the right product

Related products

Recently viewed

    • Wacker Elastosil RT 601

    Elastosil RT 601

    € 104,41 € 86,29 Excl. tax

    ✔ Potting automotive and optical parts
    ✔ Addition hardening
    ✔ Liquid
    ✔ Crystal clear
    ✔ Two-component 9:1
    ✔ Shore (A) 45

    Compare
      Compare products Delete all products

      You can compare a maximum of 3 products

        Hide compare box
        Elastosil RT 601 very clear

        Elastosil RT 601 very clear

        € 104,41

        Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »