Epoxy for laminating
Laminating epoxy can be used when laminating polyester is not sufficient. Especially when high water resistance and chemical resistance is required, epoxy is often preferred over polyester.
HT Epoxy Resin, Heat resistant up to 140°C
✔ Heat resistant up to 140 ° C
✔ Can be processed up to 10 kg in one go
✔ Clear, colorless, UV blocker
✔ Liquid as pouring syrup (viscous)
✔ Shore D 90 (hard)
✔ Castings 0.05 mm <> 10 mm
✔ 15 minutes working time *
✔ Mixer. (Weight) 100:50€ 17,65 € 14,59 Excl. tax
CompareUltraCast XT Epoxyresin Crystal Clear heat resistant till 95°C
✔ Heat resistant up to 95 ° C
✔ Crystal clear UV-resistant
✔ Shore D75-80
✔ Casting thickness 0.5 mm <> 5mm
✔ 90 minutes working time
✔ Mixing ratio (Weight) 100: 50€ 29,99 € 24,79 Excl. tax
CompareAll-Round Epoxy Casting Resin
✔ Very strong and impact resistant
✔ Clear and highly UV-resistant
✔ Shore D85
✔ Castings 1mm <> 50mm
✔ 20-25 minutes working time
✔ Mixing ratio (Weight) 100: 50€ 10,50 € 8,68 Excl. tax
CompareLaminating Epoxy Resin, 0.1 to 2 cm thick lamination
✔ Heat resistant up to 80 ° C
✔ Can be processed up to 10 kg * in 1 go
✔ Clear, colorless, UV blocker
✔ Quite liquid
✔ Shore D 90 (hard)
✔ Castings 1 mm <> 20 mm
✔ 30 minutes working time *
✔ Mixer. (Weight) 100:33-20% Sale
23,55 € 18,84 € 15,57 Excl. tax
Compare
Epoxy for laminating gives very durable, strong end results that often last longer than polyester.
The method is the same as that for polyester, so you can use similar rollers etc. However, adhesion of epoxy to itself is better which makes laminating with epoxy a bit easier. Epoxy however is often slower in gelling. Keep this in mind when finding the right epoxy for laminating vertically.
Epoxy can be processed with all glass, aramid and carbon fabrics. Only the powder-bound mats where the powder has to dissolve in the polyester styrene are better not to be used for epoxy. This is because the powder does not dissolve in epoxy.
Epoxy for laminaiting can also be filled to improve or counteract temperature conduction or electrical conduction.
If you have any questions about applications or the required quantity, please contact us. We are happy to help!