Chemlease Mold Cleaner EZ
Chemlease® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds. Ideal for preparing composite mold surfaces for the application of Chemlease® Mold Sealers and Releases. Also excellent for cleaning brushes and equipment.
Processing
1. Chemlease® Mold Cleaner EZ should be applied to the mold surface with a clean 100% cotton cloth. While the mold surface is still wet, vigorously wipe the mold dry with a second clean, dry 100% cotton cloth.
2. Frequently exchange saturated cloths with new, clean cloths.
3. Repeat process several times until all residue (dirt, dust, grease, moisture, etc.) is removed (at least two cleanings are recommended.)
Shelf life
Recommended storage temperature is between 10°C and 35°C. Keep container tightly sealed to prevent evaporation and/or contamination. If stored in cold temperatures, allow product to warm to room temperature prior to use.
Safety
H-CodeHazard Statements
H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.
P-Code Precautionary Statements
210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P240 Ground and bond container and receiving equipment.
P261 Avoid breathing mist or vapours.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
Response:
P301 + P330 + P331 + P310 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/ doctor.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P312 IF INHALED: Call a POISON CENTER/ doctor if you feel unwell.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage:
P403 + P235 Store in a well-ventilated place. Keep cool
Product information
Product information sheet Chemlease Mold Cleaner EZ
