Back

Epoxy glue Araldite 2012 (50 ml)

  • Epoxy glue Araldite 2012 (50 ml)
  • Epoxy glue Araldite 2012 (50 ml)
  • Epoxy glue Araldite 2012 (50 ml)

In stock

  • Article code: A107756

ARALDITE® 2012 adhesive has a long history of creating fast-curing, high performance bonds between multiple materials.

€ 198,-
€ 163,64 Excl. tax

Add to wishlist

Buy now Pay in 14 days with Klarna

This product is available in the following variants:

  • Fast shipping! Everything available from stock
  • Buy from the specialist
  • Extended internal Laboratory
  • More than half a million satisfied customers

Product description

Epoxy glue Araldite 2012 (50 ml)

Product Benefits

  • Fast curing
  • Self-levelling
  • Bonds multiple metals and plastics
  • Resistant to dynamic loads

Application Areas

  • Encapsulation of electronic components
  • Assembly for medical instruments
  • Assembly of furniture

Performance Specifications

  • Technology, Two-component Epoxy
  • Pot life at RT, 6 mins
  • Fixture time at RT, 20 mins
  • Mixed viscosity at RT, 30 Pa.s / 30,000 cP
  • Maximum continuous operating temperature*, 70°C / 158°F
  • Tensile strength, 44 MPa / 6,381 psi
  • Tensile modulus, 2500 MPa / 362,595 psi
  • Elongation at break, ca. 4%
 

* For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa.

Safety information
Contact with the skin must be avoided. Causes skin irritation. May cause an allergic skin reaction. Wear protective gloves when handling this product. Always work in a well-ventilated area. Toxic to aquatic life with long lasting effects.

Skin contact: Remove all contaminated clothing and footwear immediately unless stuck to the skin. Wash immediately with plenty of soap and water.

Eye contact: Flush the eye with running water for 15 minutes. Consult a doctor.

Ingestion: rinse mouth with water. Consult a doctor.

Inhalation: Remove victim from exposure, taking care of your own safety. Consult a doctor.

For further information, see the safety data sheet at www.Siliconesandmore.com.

Security requirements

H-CodeHazard Statements

H302+H312 - Harmful if swallowed or in contact with skin.

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H318 - Causes serious eye damage.

H319 Causes serious eye irritation.

H411 ​​Toxic to aquatic life with long lasting effects.

EUH205 - Contains epoxy compounds. May cause an allergic reaction.

P-Code Precautionary Statements

P102 - Keep out of reach of children.

P270 - Do not eat, drink or smoke when using this product.

P271 - Use only outdoors or in a well-ventilated area.

P273 - Avoid release to the environment.

P280 - Wear protective gloves, Protective clothing, Eye protection.

P301+P310 - IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.

P301+P330+P331 - IF SWALLOWED: rinse mouth — DO NOT induce vomiting.

P303+P361+P353 - IF ON SKIN (or hair): Take off immediately all contaminated clothing — rinse skin with water/shower.

P304+P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. remove contact lenses, if possible; keep rinsing.

P501: Dispose of contents and container according to local/regional/national/international regulations.

 

Documentation

EN - Product Information Sheet Araldite 2012

EN - Technical Data Sheet Huntsman Araldite 2012

EN - Safety Data Sheet Huntsman Araldite 2012

 

Larger quantity required?

Do you have a question about this product?

Do you have a question about this product?

Our employee is happy to help you find the right product

Recently viewed

    • Huntsman Epoxy glue Araldite 2012 (50 ml)

    Epoxy glue Araldite 2012 (50 ml)

    € 198,- € 163,64 Excl. tax

    ARALDITE® 2012 adhesive has a long history of creating fast-curing, high performance bonds between multiple materials.

    Compare
        • Silicone foam Closed Cell 2

        Silicone foam Closed Cell 2

        € 294,95 € 243,76 Excl. tax

        ✔ Foam factor 2
        ✔ Hardness Shore C 12
        ✔ Closed cell structure
        ✔ Mixing ratio (Weight) 100:100
        ✔ Processing time 9 minutes
        ✔ Curing time 4 hours@25oC
        ✔ Density 0.54 g/cm³

        Compare
            • Eli-Chem Resins UK LTD MasterCast 1-2-1 Helder Epoxy Resin coating and resin art

            MasterCast 1-2-1 Helder Epoxy Resin coating and resin art

            € 39,95 € 33,02 Excl. tax

            ✔ High gloss, Good liquid
            ✔ Crystal clear, UV resistant
            ✔ Shore D75-78
            ✔ Casting thickness: 1 mm <> 5mm
            ✔ 15-20 minutes working time
            ✔ Mixing ratio by weight: 100: 90

            Compare
                • Wacker Siliconen Primer Wacker G795

                Siliconen Primer Wacker G795

                € 22,16 € 18,31 Excl. tax

                ✔ Increases the adhesion between condensation and addition curing silicone and various surfaces
                ✔ Functions on metals, wood, various plastics such as PETG
                ✔ Soluble in white spirit or alcohol
                ✔ Works with silicones with a high oil content

                Compare
                  Compare products Delete all products

                  You can compare a maximum of 3 products

                    Hide compare box
                    Epoxy glue Araldite 2012 (50 ml)

                    Epoxy glue Araldite 2012 (50 ml)

                    € 198,-

                    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »