Silicone Primer Wacker G790 - toluene free
WACKER® PRIMER G 790 TOLUENE FREE is free of toluene and free of other aromatic solvents.
This primer G790 is suitable for all addition curing silicone (Silicone Addition ...) and condensation curing silicones in our webshop. This primer increases the adhesion between the surface and the silicone poured opon it.
Most addition curing silicone does not attach to a surface chemically. In order to promote the adhesion a primer should therefore be used.
- This primer works on:
- Metal (such as aluminum, lead, iron, steel)
- Wood
- and other substrates (such as PETG,Nylon, acrylic, epoxy, PVC)
PLEASE NOTE. The primer has an ignition temperature of 3°C (from 3°C flammable gases will start to evaporate). PLease use caution!
Processing
For proper bonding clean the surface to make it dust and grease free. Use a nonpolar solvent for such as white spirit or turpentine followed by a polar solvent such as acetone.
You can also dissolve the primer in white spirit or alcohol in order to improve the wetting of the surface by the primer.Ratio Primer: solution = from 1: 1 to 1:10
Primers work best in a very thin layer of 1 micrometer. Apply the primer very thin, and bubble free.
The primer builds up a layer using moisture form the system, the surface and surrounding air. Increasing temperature and humidity accelerates this process. At room temperature and 40% humidity you should leave the primer for 1 hour. If it's drier or colder it takes longer.
Do not wait more than 5 hours as the primed layer will start to degrade.
The primer usually instantly provides better adhesion but final results may take up to 4 days and can be enhanced by heating to 100-150°C
Durability
At least 1 year. If stored between 10 and 25°C and out of direct sunlight.
Safety
H-CodeHazard Statements
H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H336 May cause drowsiness or dizziness.
H361d Suspected of damaging the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.
P-Code Precautionary Statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection.
P273 Avoid release to the environment.
P243 Take action to prevent static discharges.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P331 Do NOT induce vomiting.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/ doctor.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P312 Call a POISON CENTER/ doctor if you feel unwell.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P332 + P313 If skin irritation occurs: Get medical advice/ attention.
P391 Collect spillage.
P370 + P378 In case of fire: Use extinguishing powder, alcohol-resistant foam or carbon dioxide to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P501 Dispose of contents/container to waste disposal
Product information
Product information Silicone Primer Wacker G790
Wacker Primer G 790 Toluene Free
