Back

Wax modeling wax Hard 1 kilo

  • Wax modeling wax Hard 1 kilo
  • Wax modeling wax Hard 1 kilo

Not in stock, please contact us.

  • Article code: S10312

✔ Hard modeling wax, not grainy
✔ Bronze colored, Block
✔ No shrinkage
✔ Pour point 66°C
✔ Melting point 70°C
✔ Ash content after combustion <0.03%

€ 19,95
€ 16,49 Excl. tax

Add to wishlist

Buy now Pay in 14 days with Klarna

This product is available in the following variants:

  • Fast shipping! Everything available from stock
  • Buy from the specialist
  • Extended internal Laboratory
  • More than half a million satisfied customers

Product description

Wax modeling wax Hard 1 kilo

Our modeling wax hard has been specifically designed for the arts sector and sculptures. This wax is suitable for the "lost wax".

The wax can be optimally shaped with tools or by hand. The modeling wax does not stick and is neither grainy nor greasy. Due to its resilience, the wax is not or hardly deformed during removal or storage.

  • Solid Modelling
  • Good malleable body
  • Does not stick
  • Not grainy
  • Bronze color
  • Firm

Technical specifications

  • Melting point: 70°C
  • Ideal processing temperature: 30-40°C
  • Color: dark brown / bronze

Processing

Cut the wax in smaller pieces. To make kneading of the wax easier place it in an oven at (maximum) 40 °C. Optionally, the wax can also be placed under a warm lamp or next to a heat source. Make sure that the temperature during heating is not too high, otherwise the wax may be too soft or even liquid.

Special notes

Avoid in any case overheating (> 100°C) the wax , as this might permanantly negatively affect its properties.

Shelf life

At least 5 years.

Safety requirements

Avoid skin contact with the molten (liquid) wax. Released gases / smoke particles should not be inhaled.

Product information

Product information sheet Wax modeling wax hard 

Specifications

Specifications for: Wax modeling wax Hard 1 kilo

  • Melting point 70 °C
  • Congealing point 66 °C
  • Color Brown
  • Application temperature 30-40 °C
  • Ash content after incineration< 0.03%
  • View all specifications
  • Penetration @ 25°C 24 dmm (=2,4 mm )
  • Viscosity @ 100C (cSt) 16
  • Filler %

Product tags

Larger quantity required?

Do you have a question about this product?

Do you have a question about this product?

Our employee is happy to help you find the right product

Related products

Recently viewed

    • Remet  Wax Modeling wax Hard

    Wax Modeling wax Hard

    € 19,95 € 16,49 Excl. tax

    ✔ Hard modeling wax, not grainy
    ✔ Bronze colored, Block
    ✔ No shrinkage
    ✔ Pour point 66°C
    ✔ Melting point 70°C
    ✔ Ash content after combustion <0.03%

    Compare
        • Wacker Silicone condensation HT 60 Set - Hard

        Silicone condensation HT 60 Set - Hard

        € 45,95 € 37,98 Excl. tax

        ✔ Very Hard, Heat resistant up to 380 ° C
        ✔ Red, Liquid, Non-Bleeding
        ✔ Shore (A) 60
        ✔ Low shrinkage (<0.8%)
        ✔ 40 minutes of working time
        ✔ Mixing ratio. (Weight) 100: 2

        Compare
            • Remet  Wax casting wax artcast Red

            Wax casting wax artcast Red

            € 14,90 € 12,31 Excl. tax

            ✔ Slush casting, A lot of detail
            ✔ Pink, Pastilles
            ✔ Low shrinkage
            ✔ Pour point 57 ° C
            ✔ Melting point 63 ° C
            ✔ Ash content after combustion <0.03%

            Compare
              Compare products Delete all products

              You can compare a maximum of 3 products

                Hide compare box
                Wax modeling wax Hard 1 kilo

                Wax modeling wax Hard 1 kilo

                € 19,95

                Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »