Back

Silicone Addition Colorless 5 for masks and soft moulds

  • Silicone Addition Colorless 5 for masks and soft moulds
  • Silicone Addition Colorless 5 for masks and soft moulds
  • Silicone Addition Colorless 5 for masks and soft moulds

In stock

  • Article code: S10194

✔ Flexible, Strong
✔ Translucent
✔ Shore (A) 5 (Very soft)
✔ Low shrinkage (<0.1%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 100

€ 28,95
€ 23,93 Excl. tax

Add to wishlist

Buy now Pay in 14 days with Klarna

  • Fast shipping! Everything available from stock
  • Buy from the specialist
  • Extended internal Laboratory
  • More than half a million satisfied customers

Product description

Silicone Addition Colorless 5 for masks and soft moulds

The Silicones A Colorless 5 is a 2-component (Platinum) addition curing silicone which cures at room temperature. 

Because of the low shrinkage and very low hardness combined with good strength these silicones are suitable for mask making and for molds of delicate castings.

  • Low shrinkage of <0.1%.
  • Very liquid so self-deaerating
  • Transparent
  • Shore A 5 very soft
  • Suitable for mask making

Technical data

  • Mixing ratio in weight: A:B = 100:100
  • Pot life at 20°C: 30 minutes
  • De-mold time at 20°C: 3-6 hours
  • Viscosity at 20°C: 1.300 mPa s
  • Color: transparant and slightly yellowish 
  • Hardness: Shore A 4~6
  • Tensile strenght: 3 +/- 0.5 N/mm²
  • Tear strenght: 14 +/- 2 N/mm
  • Elongation at break: >450%
  • Density at 20°C: 1.03 g/cm³

Note: Pot life / de-mould time is highly dependent on temperature! At a higher temperature, the processing time and de-mould time are shorter.

Processing 

The Silicone A and B component can easily be mixed by hand or by machine. Mix the A and B component carefully and in the indicated ratio (100 parts A and 100 parts B by weight). Process the mixture within the pot life and demould only after it is cured complete. Alternatively, you can speed up the curing process by placing the whole mould in an oven. Please note that air bubbles will then have less time to escape the casting.

This shore hardness of this silicone can be adjusted by adding the Silicone Addition Colorless 50.

If you combine a mixture of the Shore 5 with a mixture of the Shore 50 you get a shore hardness between 5 and 50. For example: For 100 grams of Shore 18,5 you need 35 grams of Shore 5 A component 35 grams of Shore 5 B component together with 15 grams of Shore 50 A component and 15 grams of Shore 50 B component.

Extra information 

Trapping of air bubbles can be prevented best by placing the silicone under vacuum immediately after mixing. To prevent air bubbles, stir the A and B component well but slowly without stirring in air. We advise to use a figur of 8 motion. If you want to reduce the Shore (hardness), you can add silicone oil from the shop. Please note that oil does not bind to the silicone network and may over time bleed from the silicone.

If you do not want to pour the silicone spatula but you can add Silicone Thixo A (note: not Silicone Thixo C !!). You can also add fumed silica. You can silicone intense colors with silicon dye.

Please note: This is an addition curing silicone. This type of silicones may experience cure inhibition when coming into contact with sulfer, nitrogen, amino groups and metl salts. If you are not certain that the products you use (including gloves, spatulas and cups) contain these ingredients, please do a little test first! These components are often found in many latex gloves, some platicines, glues, laquers, condensation curing silicones, silicone caulk, natural rubbers and 3D printing materials (mainly stereolithography). If you still want to use such materials you might have to brush on a protective layer of poly vinyl alcohol.

Durability 

Provided that the silicone in sealed packaging, stored cool and frost-free, the shelf life is at least one year.

Safety 

If you use silicone frequently we advice the use of gloves and to work in a properly ventilated area. For safety information see the safety data sheet.

Product information

Product information sheet Silicone Addition Colorless 5

Specifications

Specifications for: Silicone Addition Colorless 5 for masks and soft moulds

  • Shore (A) 5
  • Color A Comp. Colorless
  • Color B Comp. Colorless
  • end Color Colorless
  • cured density 1.03 g/cm3
  • View all specifications
  • viscosity mixture 1.300 mPa s
  • Mixing ratio A/ B 1:1
  • Working Time 30 minutes @ 20 oC
  • Curing time 3-6 hours @ 20 oC
  • tensile strength 3 +/- 0,5 N/mm2
  • extensibility 500%
  • tear Strength > 8 N / mm
  • Linear shrinkage<0,1%
  • Curing method Neutral
  • Volume resistivity Not measured
  • Permittivity Not measured
  • Heat capacity [Kj/Kg Kelvin] NA
  • Heat conductivity [W/mK] NA
  • Product category

Product tags

Larger quantity required?

Do you have a question about this product?

Do you have a question about this product?

Our employee is happy to help you find the right product

Related products

Recently viewed

Compare products Delete all products

You can compare a maximum of 3 products

    Hide compare box
    Silicone Addition Colorless 5 for masks and soft moulds

    Silicone Addition Colorless 5 for masks and soft moulds

    € 28,95

    Please accept cookies to help us improve this website Is this OK? YesNoMore on cookies »