{"product_id":"zhermack-za-10-orange-oranje-platina-additiesilicone-voor-matrijzenbouw-casting","title":"Zhermack ZA 10 Orange – Orange Platinum Addition Silicone for Mold Making \u0026 Casting","description":"\u003ch2\u003ePremium Orange Platinum-Addition Silicone for Professional Mold Making and Casting Applications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eZA 10 Orange\u003c\/strong\u003e is a pourable, room-temperature curing, two-component platinum-addition silicone that cures at 23 °C to an orange end product with a Shore A 13 hardness. With a working time of 15 minutes and a curing time of 120 minutes at 23 °C, this product offers a practical combination of detail reproduction, elastic recovery, and demolding. The mixing ratio is 1:1 by weight; the platinum catalyst is contained in the Catalyst component. ZA 10 Orange is suitable for applications where flexibility, tear strength, and reproducible processing are important.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e1:1 Mixing ratio:\u003c\/strong\u003e – Equal amounts of Base and Catalyst simplify weighing.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e15-minute pot life:\u003c\/strong\u003e – At 23 °C, there is time for mixing, degassing, and controlled pouring.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e120-minute curing time:\u003c\/strong\u003e – The mold can be efficiently demolded at 23 °C.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003eShore A 13 hardness:\u003c\/strong\u003e – The flexible mold supports the demolding of complex details.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e14 N\/mm tear strength:\u003c\/strong\u003e – The cured silicone is suitable for repeated use.\u003c\/li\u003e\n\n\u003cli\u003e\n\n\u003cstrong\u003e350% Elongation at break:\u003c\/strong\u003e – The high elongation provides room when releasing cast parts.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eTypical Applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSilicone molds for polyurethane resins in prototyping and product development.\u003c\/li\u003e\n\n\u003cli\u003eReproduction molds for acrylic resins in model making, architectural modeling, and product design.\u003c\/li\u003e\n\n\u003cli\u003eCasting molds for plaster and coatings in set construction, architecture, and craft applications.\u003c\/li\u003e\n\n\u003cli\u003eSFX, prop, and set construction for film, television, theater, and events.\u003c\/li\u003e\n\n\u003cli\u003eIndustrial models and functional prototypes where elastic demolding is required.\u003c\/li\u003e\n\n\u003cli\u003eArt and sculpture reproductions where flexibility and tear resistance are important.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProcessing Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\n\u003cli\u003eStir Base and Catalyst separately before weighing the components.\u003c\/li\u003e\n\n\u003cli\u003eWeigh both components in a 1:1 ratio. Only use Base and Catalyst with the same batch number; a deviation of up to 5% will not change the result according to the provided information.\u003c\/li\u003e\n\n\u003cli\u003eMix vigorously until the color is uniform, scraping the bottom and sides of the mixing container.\u003c\/li\u003e\n\n\u003cli\u003eDegas the mixture if necessary to reduce trapped air.\u003c\/li\u003e\n\n\u003cli\u003ePour within approximately 15 minutes, preferably from a height of about 30 cm.\u003c\/li\u003e\n\n\u003cli\u003eAllow to cure for approximately 120 minutes at 23 °C. At 40 °C, working and curing times are approximately halved; at 4 °C, the working time doubles and curing takes about three times longer.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\u003ch3\u003eTechnical Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe mixture has a viscosity of approximately 4,500 mPa·s and a density of approximately 1.10 g\/cm³. The cured silicone has a tensile strength of approximately 6 N\/mm², an elongation at break of approximately 350%, a tear strength of approximately 14 N\/mm, and an operating temperature range of −40 to 200 °C. These are typical values after 24 hours of vulcanization at 23 °C and are not intended as product specifications.\u003c\/p\u003e\n\u003cp\u003eManufactured by \u003cstrong\u003eZhermack S.p.A.\u003c\/strong\u003e, a specialist in materials for professional model making and mold-making applications.\u003c\/p\u003e\n\u003ch3\u003eImportant Warning: Inhibition in Addition Silicones\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is an addition silicone (platinum-cure). These silicones can be inhibited by sulfur, nitrogen, amino compounds, and metal salts. If you are unsure whether gloves, spatulas, models, or 3D printing materials contain these substances, perform a small test first. Inhibiting substances are found in latex gloves, some plastilines, condensation silicones, one-component silicone sealants, and certain 3D printing materials. If in doubt, apply a layer of polyvinyl alcohol (PVA) as a release layer.\u003c\/p\u003e\n\u003ch3\u003eProfessional Support\u003c\/h3\u003e\n\u003cp\u003eFor ZA 10 Orange, ensure you use the same batch number, a correct 1:1 mix, and a clean, dry, and grease-free surface. Contact us for technical data sheets, processing manuals, or product advice.\u003c\/p\u003e","brand":"Zhermack","offers":[{"title":"Zhermack ZA 10 Orange [2 kg Set]","offer_id":55086626603349,"sku":"S82319","price":89.95,"currency_code":"EUR","in_stock":false},{"title":"Zhermack ZA 10 Orange [10 kg Set]","offer_id":55086626636117,"sku":"S82316","price":379.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0896\/4096\/0341\/files\/Logo_Zhermack.png?v=1762179478","url":"https:\/\/siliconesandmore.com\/en\/products\/zhermack-za-10-orange-oranje-platina-additiesilicone-voor-matrijzenbouw-casting","provider":"siliconesandmore","version":"1.0","type":"link"}