Silicones for casting electronics and optical elements
Due to their inertness and good climate resistance, silicones are extremely suitable for the potting of electronics and optical elements.
Elastosil RT 601
✔ Potting automotive and optical parts
✔ Addition hardening
✔ Liquid
✔ Crystal clear
✔ Two-component 9:1
✔ Shore (A) 45€ 104,41 € 86,29 Excl. tax
CompareElastosil RT 625
✔ Easy to process due to low viscosity
✔ Fast and shrink-free curing at room temperature
✔ Low Shore A hardness (approx. 25)
✔ High elongation, excellent tensile strength
✔ Excellent tear strength
✔ Cured rubber is transparent and colourless€ 39,95 € 33,02 Excl. tax
CompareSilicone Addition Clear 25
✔ Flexible, Crystal Clear
✔ Suitable for potting
✔ Shore A 25 (Medium Hard)
✔ Low shrinkage (<0.1%)
✔ 130 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 102,92 € 85,06 Excl. tax
CompareSilicone Addition Clear 5 (very soft)
✔ Flexible, Crystal clear
✔ Suitable for potting
✔ Shore (A) 5 (Very Soft)
✔ Low shrinkage (<0.1%)
✔ 30 minutes working time
✔ Mixing ratio (Weight) 100: 100€ 66,50 € 54,96 Excl. tax
CompareSilicone Addition Gel 840 Water Clear
✔ Gel, Very Clear, Shock Absorbent
✔ Suitable for potting
✔ Shore (OO) 0 (Gel)
✔ Low shrinkage (<0.3%)
✔ 80 minutes of working time
✔ Mixing ratio (Weight) 100: 100€ 26,95 € 22,27 Excl. tax
CompareSilicone foam Closed Cell 2
✔ Foam factor 2
✔ Hardness Shore C 12
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 9 minutes
✔ Curing time 4 hours@25oC
✔ Density 0.54 g/cm³€ 294,95 € 243,76 Excl. tax
CompareSilicone foam Closed Cell 3
✔ Foam factor 3
✔ Hardness Shore C 2-50
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 3 minutes
✔ Curing time 50 minutes
✔ Density 0.352 g/cm³€ 272,92 € 225,55 Excl. tax
CompareSilicone foam Closed Cell 3 - Spreadable
✔ Foam factor 3
✔ Spreadable
✔ Hardness Shore C 2-50
✔ Flame retardant UL94-HB
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 3 minutes
✔ Curing time 50 min @ 60°C
✔ Density 0.352 g/cm³€ 272,92 € 225,55 Excl. tax
CompareSilicone foam Closed Cell 5
✔ Foam factor 5
✔ Hardness Shore C 7
✔ Closed cell structure
✔ Mixing ratio (Weight) 100:100
✔ Processing time 2 minutes
✔ Curing time 1 hours
✔ Density 0,175 g/cm³€ 272,92 € 225,55 Excl. tax
CompareSilicone foam Open Cell 6
✔ Foam factor 6
✔ Hardness Shore C 4
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 2 hours
✔ Density 0.193 g/cm³€ 272,92 € 225,55 Excl. tax
CompareSilicone foam Open Cell 7 - Spreadable
✔ Foam factor 7
✔ Spreadable
✔ Hardness Shore C 5-10
✔ Flame retardant UL94-V0
✔ Open cell structure
✔ Mixing ratio (Weight) 100:100
✔ Working time 2 minutes
✔ Curing time 70 min @ 60°C
✔ Density 0.162 g/cm³€ 272,92 € 225,55 Excl. tax
CompareWACKER SilGel® 612 A/B
✔ two-part, 1 : 1 mixing ratio
✔ low viscosity
✔ rapid heat cure
✔ very low hardness (silicone gel)
✔ crystal clear
✔ pronounced inherent tack
✔ flame retardant, UL listed 94HB€ 87,76 € 72,53 Excl. tax
Compare
