Silicone glue Wacker ELASTOSIL® E10 RED
Properties Uncured
Property | Condition | Value | Method |
|---|---|---|---|
| Color | - | red | - |
| Density | 23 °C | 1.10 g/cm³ | DIN EN ISO 1183-1 A |
| Viscosity D = 0,5 1/s | 25 °C | 9000 | ISO 3219 |
| Viscosity D = 25 1/s | 25 °C | 6500 | ISO 3219 |
| Skin formation time[1] | - | 10 - 15 min | - |
| Curing time | 23 °C | 50 % r.h | 12 h/mm | - |
1 at 23 °C, 50 % RH
These figures are only intended as a guide and should not be used in preparing specifications.
Properties Cured
Property | Condition | Value | Method |
|---|---|---|---|
| Color | - | red | - |
| Hardness Shore A | - | 25 | DIN ISO 48-4 |
| Tensile strength[1] | - | 2.5 N/mm² | ISO 37 |
| Elongation at break[2] | - | 300 % | ISO 37 |
1 Type 3 / 23°C / 2mm
2 Type 3 / 23°C / 2mm
2 Type 3 / 23°C / 2mm
These figures are only intended as a guide and should not be used in preparing specifications.
Processing
ELASTOSIL® E10 ROT shows good primerless adhesion to many substrates. We recommend running preliminary tests to optimize conditions for the particular application.
Packaging & Storage
Storage
The 'Best use before end' date of each batch is shown on the product label.
Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.
Product Information Elastosil E10
