Adjust Your Preferred Hardness by Adding ELASTOSIL® FX Softener.By adding ELASTOSIL® FX Softener, you can bring down the hardness of your ELASTOSIL® FX base rubber to achieve more “flesh-like” textures. The softer you go, the greater the tack will be,...
Pourable, addition-curing RTV-2 silicone rubber, especially suitable for all molds of models with extensive undercuts. Excellent flowability and self-deaeration High tear strength Low hardness (Shore A 28) Mixing ratio of 1:1 for straightforward processing Fast and non-shrink cure at room...
The Silicone Foam Closed Cell 2 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 2 times the volume. This silicone can of course also be colored with silicone dye.This silicone is used...
This hardener works on all condensation silicones. This T51 hardener from Wacker makes the silicone more resistant to polyester. This B component may also be mixed with other condensation B components to achieve a speed of your choice with the...
Zhermack SFX 00-20 – Ultra-flexible silicone for realistic applications Discover Zhermack SFX 00-20, a colorless, biocompatible silicone rubber with exceptional stretchability and softness. This high-quality 2-component platinum-cured addition silicone is specially developed for applications where realistic skin textures, extreme flexibility...
The Silicone Foam Closed Cell 3 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 3 times the volume. This silicone can of course also be colored with silicone dye.This silicone is used...
The Silicone Foam Closed Cell 5 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 5 times its volume. This silicone can of course also be colored with silicone dye.This silicone is used...
Semsil HTV Platinum Silicone Top Quality HTV Platinum Silicone – Your Ultimate Solution for Versatile Applications! Are you in need of high-performance HTV (High Temperature Vulcanized) silicone that meets the stringent requirements of the FDA 21 CFR Section 177.2600? Look...
Castable, Addition curing, 2 component silicone rubber that vulcanizes at room temperature. Main application: mold making, encapsulation of electrical and electronic components, coating, engineering production molded parts • Easy to process due to low viscosity• Fast and shrink-free curing at...
The Silicone Foam Open Cell 6 is a 2-component (Platinum) Poly-Addition casting silicone that cures at room temperature and foams up to 6 times its volume. This silicone can of course also be colored with silicone dye.This silicone is used...
The Silicone Foam Closed Cell 3 Spreadable is a 2-component (Platinum) Poly-Addition casting silicone/ spreadable silicone that cures at elevated temperature and foams up to 3 times the volume. This silicone can of course also be colored with silicone dye.This...
Properties Uncured Property Condition Value Method Color - red - Density 23 °C 1.10 g/cm³ DIN EN ISO 1183-1 A Viscosity D = 0,5 1/s 25 °C 9000 ISO 3219 Viscosity D = 25 1/s 25...
WACKER SilGel® 612 A/B is a pourable, addition-curing, RTV-2 silicone rubber that vulcanizes at room temperature to a very soft silicone gel. Main application:- Electronic Control Unit (ECU)- Electronics- Heating, Ventilation, Air Conditioning (HVAC)- Potting & Encapsulation- Power Control Unit (PCU)...
The Stensil ECO 50 malleable silicone, is a 2 component (Poly-Addition) silicone that cures at room temperature. The silicones are very easy to mix and process by hand. The silicones are ready for use after just 5 minutes. Easy to...
A colorless, very soft and stretchable silicone ideally suited for masks, robotics and similar projects. Colourless Low shrinkage <0.1%. Good fluidity Self-ventilating Usable on the skin Very soft Extremely stretchy 850% Mixing of components 1:1 according to weight ratios very...
The Silicone Foam Open Cell 7 Spreadable is a 2-component (Platinum) Poly-Addition casting silicone that cures at elevated temperature and foams up to 7 times its volume. This silicone can of course also be colored with silicone dye. This is...
This hardener works on all condensation silicones. This T40 hardener from Wacker, allows the normal condensation silicones to harden a little faster to a generally usable silicone rubber. This T40 can be used with all condensation hardening silicones and is...
ELASTOSIL® RT 629 A/BRoom Temperature Curing Silicone Rubber (RTV-2). Castable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.Main application: making antistatic pressure pads also known as printing tampons. Properties• Antistatic finish• Very good fluidity• High reactivity for fast demoulding...
This hardener works on all condensation silicones. This T37 hardener from Wacker makes the silicone more resistant to polyurethane and epoxy. This B component may also be mixed with other condensation B components to achieve a speed of your choice...
This hardener works on all condensation silicones and is especially intended for the Wacker M 4503 condensation silicones. The T-35 is easy to mix with the T-47 for shorter curing times. Processing The condensation hardening silicone can be easily mixed...
Wacker silicone adhesive N2010 Neutral curing silicone adhesive, suitable for electronics. Translucent Sprayable Adheres to many surfaces, even without pre-treatment Solvent-free Recommended exposure temperature after curing: -45 °C to +180 °C 1 component system Self-levelling/self-flattening Applications For (small) household appliances....
ELASTOSIL® C 1200 A/B has been specially developed for the professional production of reusable vacuum bags for the production of composite parts. Due to its shear thinning behavior it is self-levelling, but does not run off vertical surfaces. The medium...
HTV Drives monocomponent Very hard Shore (A) 61/63 Description These silicones are very suitable as a template itself cast pewter miniatures or for making your own fish bobs and fishhooks (fishing lure). These disks are primarily designed for the tin/pewter...
The Wacker Elastosil RT 480 is a spreadable 2-component condensation silicone, which cures at room temperature, with a higher hardness. These silicones are ideal for making molds via a lubrication process and for making seals that need to be made...
Speed up the standard curing time of the Wacker Elastosil FX silicone by adding the FX Fast. First weigh and mix the required amount of silicone as described. Then add the Wacker Elastosil FX Fast in the desired amount. Then...
This T 40 paste catalyst is primarily intended for the kneadable Wacker Elastosil M 1470. Processing The condensation hardening silicone can be easily mixed by hand. Mix the A and B components carefully and in the specified ratio. T40 mixture...
The Silicone Gel 840 is a 2-component (Platinum) Poly-Addition molding silicone that cures at room temperature to a clear colorless gel. The silicones are very fluid after mixing. The silicone can take on a very faint yellowish glow over time...
True Skin 20 - Professional Platinum Silicone Elastomer This is a castable, two-component, addition-curing silicone elastomer system. After mixing parts A and B in the correct proportions, the system will cure at ambient temperature within 24 hours, but the cure...
Description This is a castable, two-component, addition-curing silicone elastomer system. After mixing parts A and B in the correct proportions, the system will cure at ambient temperature within 24 hours, but the cure rate can be accelerated by applying heat....
Wacker Elastosil M 4600 AB - Professional RTV-2 Silicone Elastosil M 4600 AB is a high-quality 2-component RTV silicone rubber from Wacker that cures at room temperature to a flexible, durable rubber. Product features: RTV-2 system - Room Temperature Vulcanizing...
Platinum SiliconeQM 272 – High-quality casting silicone for professional use Key Features Relatively high hardness for silicone rubber Low shrinkage <0.1% for dimensionally stable results Good fluidity and self-venting during processing Suitable for hard but flexible molds Excellent resistance to...
good flow ability and self-deaeration proper tear strength universal hardness (26 Shore A) easy to meter and mix due to 1 : 1 ratio perfect and non-shrink cure at room temperature which can be accelerated considerably by the application of...
