Various additives, so that you can adjust the silicone as desired. Read the product information carefully before use. If you have questions you can always contact us at info@siliconesandmore.com or +31 (0)46 303 0989.
With this filler you get a lighter cast and consume less resin. Glass beads are very small perls of glass. The beads are so small that they can not be distinguish with the naked eye. The material looks like flour....
Fumed Silica is a powder suitable for making liquid materials, thick or paste like. When mixed properly without air entrapment this powder will disolve colorless. This powder can also be used in Siliconen Culinair® because the result is still food safe....
These ceramic microspheres are used to reduce the density of resins and other casting materials. These micro granules can be used in polyurethane, silicone, epoxy, polyester, plaster, concrete, cement and similar products. Technical data Melting point: 1200-1350°C Bulk density:...
Retarder to prolong working time of addition curing silicone Platinum curing silicone / addition curing silicone hardens slower at lower temperatures (below 20 degrees Celsius. In case this is not an option for you, you can also use this product...
Description Talcum Powder is a multifunctional material that can be used for many purposes. The powder is ideal to eliminate the non-slipping character of silicone, but can also be used for a fine discharge between two layers of addition silicones....
Moisture Curing Silicone Rubber (RTV-1) Properties ready-to-use, one-component system low module excellent primerless adhesion to many substrates no use of organotin catalysts Specific features Flexible at low (-40 °C) and high temperatures (+180 °C) Flowable Low viscosity Solvent-based...
Wacker silicone adhesive N2010 Neutral curing silicone adhesive, suitable for electronics. Translucent Sprayable Adheres to many surfaces, even without pre-treatment Solvent-free Recommended exposure temperature after curing: -45 °C to +180 °C 1 component system Self-levelling/self-flattening Applications For (small) household appliances....
Properties Uncured Property Condition Value Method Color - red - Density 23 °C 1.10 g/cm³ DIN EN ISO 1183-1 A Viscosity D = 0,5 1/s 25 °C 9000 ISO 3219 Viscosity D = 25 1/s 25...
Works fast Very fluid Long shelf life Description The best way to remove non cured silicone. Silicone remover is a liquid which dissolves uncured silicone which facilitates cleaning of uncured silicone spills. Technical data This liquid dissolves fluid silicones, meaning...
This primer G795 is suitable for all addition curing silicone (Silicone Addition ...) and condensation curing silicones in our webshop. This primer increases the adhesion between the surface and the silicone poured opon it. Most addition curing silicone does not...
WACKER® PRIMER G 791 A/B is a two-component, addition-curing primering system diluted in an organic solvent. The primer is applied to the substrate and after curing forms a primer film which firmly adheres to the substrate. Application of a silicone...
WACKER® PRIMER G 790 TOLUENE FREE is free of toluene and free of other aromatic solvents. This primer G790 is suitable for all addition curing silicone (Silicone Addition ...) and condensation curing silicones in our webshop. This primer increases the...
ELASTOSIL® AUX G 3243 is a solution of a siloxanes and reactive silanes in organic solvents. It is used to pretreat metallic, ceramic, glass or other polymeric substrate surfaces to enable excellent adhesion towards subsequently vulcanized ELASTOSIL® R solid silicone elastomers (HCR/HTV, peroxide...
The mixture forms a rigid film of silicone resin when exposed to humidity at ambient or elevated temperature and adheres firmly to the substrate. The catalyzed silicone rubber applied to it then forms a tight bond with this resin film...
Elastosil E43N is a self-leveling one component silicone for sealing, gluing or coating silicone. The Elastosil E43N retains its elasticity at different temperatures and after curing has a very long shelf life and is UV resistant. E43 N contains no...
Elastosil E43 Black is a self-leveling one component silicone for sealing, gluing or coating silicone. The Elastosil E43 Black retains its elasticity at different temperatures and after curing has a very long shelf life and is UV resistant. E43 Black...
Elastosil E43 is a self-leveling one component silicone for sealing, gluing or coating silicone. The Elastosil E43 retains its elasticity at different temperatures and after curing has a very long shelf life and is UV resistant. E43 contains no solvents...
This Silicone Glue Set is ideal for bonding cured silicone to a wide variety of substrates. If you want to glue cured silicones (condensation and addition) to a surface you can use this set. It even works to glue together...
Silicone Condensation Accelerator speeds up the curing process and shortens the demoulding time. This 1 component of whitish emulsion is added to the A component of condensation silicone to shorten the processing time and demal time of silicone. The operation...
Silicone Thixo C is a thickening agent for all condensation curing silicone. Thixo C allows you to thicken the otherwise fluid silicone. Silicone Thixo C (condensation-curing) is a viscous component that can be added to the pourable condensation curing silicone, to make...
Silicone Addition Thixo A is a thickener for all addition-/ platinum curing silicones. Thixo allows you to thicken the otherwise fluid silicone. Silicone Thixo A (addition-curing) is a viscous component that can be added to the pourable addition curing /...
This silicone deadener makes your platinum curing silicone softer, more flexible, more stretchable and above all less like elastic and more like skin tissue. This deadener actively contributes to the polymer network and thus will not migrate to the surface....
Platinum catalyst to activate or speed up the reaction of addition curing (platinum) silicone. Especially suited when working in colder environments or working with curin inhibiting materials. Usage Add in very small amounts. The exact amount depends on the silicone...
Description BRB PTM 20 is a polyphenylmethylsiloxane that improves the performance of many types of cosmetic formulations. It has excellent solubility in alcohol. Application Used as a water-repellent additive and to reduce the tack and stickiness of organic ingredients in...
This silicone coating is applied to cured silicone to mattify and reduce friction. LSR Top Coat HE is a two-component translucent matt coating with high elongation for spraying technology. It has been developed as an abrasion resistant coating for printed...
Isopropanol is widely used in health care, but also for example for cleaning lenses. Isopropanol is also found in many disinfectants and detergents. Isopropanol IPA is a non-potable alcohol. Very versatile Strong disinfectant Very good degreaser Cleaning silicone A degreaser...
Description Cyclopentasiloxane is a variant from the cyclomethicone category. A base fluid in a number of personal care products, with excellent spreading, easy rub-out and lubrication properties together with unique volatility characteristics. Application Antiperspirants, deodorants, hair sprays, cleansing creams, skin...
Chemlease® 15 Sealer EZ is a high performance sealer developed to condition and seal mold surfaces, reduce mold porosity and act as a base for new or reconditioned molds. Benefits Reduces porosity problems. Provides an excellent base coat for all...
Chemlease® Mold Cleaner EZ is a special blend of solvents designed to dissolve and remove wax and dirt from composite molds. Ideal for preparing composite mold surfaces for the application of Chemlease® Mold Sealers and Releases. Also excellent for cleaning...
Various additives, so that you can adjust the silicone as desired. Read the product information carefully before use. If you have questions you can always contact us at info@siliconesandmore.com or +31 (0)46 303 0989.
