Chem-Trend Chemlease Mold Cleaner EZ – Mould Cleaner for Composite Moulds & Tools

Chemtrend Chemlease Mold Cleaner EZ

Chem-Trend Chemlease Mold Cleaner EZ – Mould Cleaner for Composite Moulds & Tools

800 grams
€29,95
Skip to product information
Chemtrend Chemlease Mold Cleaner EZ
✔ Solvent-based mould cleaner✔ Dissolves wax and dirt from composite moulds✔ Leaves the semi-permanent layer intact✔ Wipe on and wipe dry straight away✔ Also for brushes and equipment✔ Packaging 800 g or 3.8 kg
€29,95
incl. VAT (21%) €24,75 excl. VAT
S10877
Choose from

Temporarily sold out

Leave your email address and we will let you know as soon as this variant is back in stock.

Variant: 800 grams

You will only receive a message about this product, no newsletter.

  • 30-day returns
  • Over 100,000 happy customers
  • Pay later with Klarna
  • Personal advice from material experts
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • Google Pay
  • iDEAL Wero
  • Klarna
  • Maestro
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Satispay
  • Union Pay
  • Visa

Question about this product? Our material experts are happy to help you choose the right product. Contact us

Solvent-based cleaner for composite moulds

Chemlease Mold Cleaner EZ by Chem-Trend is a special blend of solvents that dissolves and removes wax and dirt from composite moulds. According to Chem-Trend, the cleaner dissolves waxes and polishes without removing the semi-permanent release layer. This prepares the mould surface for a Chemlease sealer or release agent. You can also use it to clean brushes and equipment. Available in 800 grams and 3.8 kg.

Key benefits

  • Dissolves wax and dirt: removes dirt, dust, grease and wax residue from the mould surface.
  • Spares the release layer: according to Chem-Trend the semi-permanent layer stays intact.
  • Easy: wipe on and wipe dry straight away.
  • Also for tools: suitable for cleaning brushes and equipment.

Typical applications

  • ✓ Cleaning composite moulds before applying a sealer or release agent
  • ✓ Preparing moulds for a semi-permanent release agent such as Chemlease PMR EZ
  • ✓ Cleaning brushes and equipment

Application

  1. Apply the cleaner with a clean 100% cotton cloth.
  2. While the surface is still wet, immediately wipe the mould dry vigorously with a second clean, dry cotton cloth.
  3. Replace saturated cloths regularly with new, clean ones.
  4. Repeat until all residue (dirt, dust, grease, moisture) has been removed. Clean at least twice.

Points to note

  • ✓ Highly flammable. Keep the cleaner away from heat, sparks and open flames and ground containers and equipment.
  • ✓ Work outdoors or in a well-ventilated area and wear gloves, eye protection and respiratory protection if needed.
  • ✓ Store the cleaner between 10 and 35 °C in a tightly closed container to prevent evaporation and contamination. If it has been stored cold, let it reach room temperature before use.

Professional support

Not sure how best to clean and prepare your moulds? Email us at info@siliconesandmore.com and we will be happy to help.

BrandChem-Trend
Product lineChemlease
Typesolvent-based mould cleaner
Usecomposite moulds, brushes and equipment
Applicationclean cotton cloth, wipe dry straight away
Storage temperature10 to 35 °C
Packaging800 g or 3.8 kg

Safety Information

This product is classified as a highly flammable liquid and vapour (H225). It may be fatal if swallowed and enters airways (H304) and may cause damage to organs through prolonged or repeated exposure (H373). It also causes skin irritation (H315) and serious eye irritation (H319), and may cause respiratory irritation (H335) and drowsiness or dizziness (H336). Signal word: Danger. Keep the product away from heat, sparks and open flames and ground containers and equipment. Only use it outdoors or in a well-ventilated area and do not breathe the vapour. Wear protective gloves, eye protection and respiratory protection if needed. If swallowed: rinse mouth, do not induce vomiting and immediately call a poison centre or doctor. Always consult the supplied safety data sheet (SDS) for full information on hazards, handling, storage and first aid.
Safety PictogramsSafety Data Sheets (SDS)
Required protection (ISO 7010)
GHS02GHS07GHS08ISO 7010 M009ISO 7010 M004ISO 7010 M017
Signal WordH‑codeHazard Statement
Danger H225 Highly flammable liquid and vapour
Danger H304 May be fatal if swallowed and enters airways
Warning H315 Causes skin irritation
Warning H319 Causes serious eye irritation
Warning H335 May cause respiratory irritation
Warning H336 May cause drowsiness or dizziness
Warning H373 May cause damage to organs through prolonged or repeated exposure
P‑codePrecautionary statement
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P240 Ground and bond container and receiving equipment
P261 Avoid breathing dust/fume/gas/mist/vapours/spray
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective gloves/protective clothing/eye protection/face protection
P301 + P330 + P331 IF SWALLOWED; rinse mouth. Do NOT induce vomiting
P310 Immediately call a POISON CENTER/doctor
P302 + P352 IF ON SKIN; wash with plenty of water and soap
P312 Call a POISON CENTER/doctor if you feel unwell
P305 + P351 + P338 IF IN EYES; rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing

Frequently asked questions

What is the delivery time for my order?

Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.

Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.

What is the return policy?

You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.

How can I track my order?

As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.

I have a problem with my order – how do I reach you?

Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.

Can I order as a business?

Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.

EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.

You might also need this