Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 250 grams
You will only receive a message about this product, no newsletter.
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
Backorder: longer delivery time. Ask us for the current lead time.
Backorder: longer delivery time. Ask us for the current lead time.
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Monovinyl silicone fluid that makes platinum silicones softer
SAM Deadener 1000 makes addition cure (platinum) silicones softer, more flexible and more stretchable. It is a linear polydimethylsiloxane with a vinyl group at only one end and a viscosity of 1000 cSt. During curing, that single end bonds into the silicone network while the rest of the chain hangs free. This lowers the hardness and modulus and also changes the way the silicone moves: no longer springy like an elastic band, but slow and fleshy, more like tissue. Because the deadener is chemically bound, it does not sweat out at the right dosage, unlike silicone oil. That makes it a favourite among special FX specialists.
SAM Deadener 1000 is based on BRB Mono Vinyl Fluid 1000 from BRB International. For larger quantities or a different viscosity, contact us at info@siliconesandmore.com.
Key benefits
- Softer and more stretchable: lowers the hardness and modulus of cured addition silicones, all the way to gel-like consistencies.
- No sweating: the vinyl group reacts into the network, so the deadener does not migrate to the surface like a free silicone oil.
- Skin-like movement: takes the elastic rebound out of the silicone, ideal for realistic skin, prosthetics and animatronics.
- Cures without by-products: reacts by addition (hydrosilylation) with the crosslinker in your silicone, without cleavage products.
- Low volatile content: no more than about 1 %, so hardly any weight loss or shrinkage.
- Very easy to use: colourless, mixes well and can be added to component A, component B or the mixture.
- Powerful: even a small addition has a clearly noticeable effect.
⚠️ More deadener is not always better, watch the balance in your silicone
SAM Deadener 1000 works only in addition cure (platinum) silicones. In condensation cure (tin) silicones it does not react and behaves like a free oil.
Every vinyl group in the deadener uses up part of the Si-H groups of the crosslinker in your silicone. At high dosages there is eventually not enough crosslinker left. The result:
- ✓ the silicone cures more slowly or incompletely and stays tacky;
- ✓ deadener that can no longer bond into the network may still sweat out.
The "no sweating" claim therefore applies within a dosage your silicone can handle. Where that limit lies varies widely between silicones and can only be established with a test casting.
Typical applications
- ✓ Realistic skin and prosthetics for special FX and film
- ✓ Soft silicone masks and cosplay parts
- ✓ Animatronics and robotics, where skin has to move smoothly
- ✓ Soft, gel-like silicones and filling gels for encapsulated parts
- ✓ Props and set building with a soft, lifelike feel
- ✓ Formulating addition cure RTV-2 silicones with lower hardness and modulus
Processing
- Check that your silicone is addition cure (platinum). The deadener does not work in tin silicones.
- Add the deadener to component A, to component B or to the mixture of A and B. The easiest way is to add it to component A and stir well before adding B.
- Usually start with 10 % of the total weight of A and B combined. Example: if you normally use 100 grams of A and 100 grams of B, now use 100 grams of A, 100 grams of B and 20 grams of deadener.
- Increase in small steps until you reach the desired softness. For a gel, up to 200 % deadener is sometimes needed, depending on the silicone.
- Mix thoroughly and preferably degas under vacuum before pouring.
- Test every dosage on a small test casting first. Besides hardness, the working time and cure time usually change as well.
We deliberately do not give a fixed dosage table. How much deadener you need for a given effect depends heavily on the silicone you use, and is best tested yourself.
Points of attention
- ✓ Silicones with a lot of deadener become gel-like or tacky. They are then mainly intended for encapsulation, for example in a thin silicone skin, or for finishing with talcum powder.
- ✓ The product is not classified as hazardous under CLP (Regulation (EC) No 1272/2008) and is not subject to dangerous goods transport regulations.
- ✓ Contains 0.1 to 1 % each of octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6). These substances are on the REACH Candidate List of substances of very high concern.
- ✓ Work in a well-ventilated area, do not eat, drink or smoke while working, wear liquid-tight gloves (EN 374) and safety glasses with side shields, and wash your hands after use.
- ✓ Spilled product makes floors very slippery. Absorb it with sand or another absorbent material.
- ✓ Do not mix with oxidising agents, acids or bases.
- ✓ Shelf life at least 2 years, provided it is stored tightly closed in a dry place at room temperature.



Professional support
Not sure how much deadener your silicone can take, or want to achieve a specific hardness or skin texture? Contact us at info@siliconesandmore.com. Tell us which silicone you use and what result you are after, and we will help you find the right dosage and, if needed, a better suited base material.
Product Properties
- ColorColourlessColor of the finished product
- TransparencyTranslucentDegree of transparency
- Viscosity1000mPa·sViscosity of the uncured silicone
- Density1.0g/cm³Density of the cured material
Physical Properties
- Flash point150°CMin. temperature at which the product ignites
- Boiling point250°CBoiling point at atmospheric pressure
Application
- Use caseSoftener (deadener) for addition cure (platinum) siliconesIntended use
- Silicone type["Addition cure","Auxiliary"]Type of silicone or polymer
Safety Information
SAM Deadener 1000 is not classified as hazardous under Regulation (EC) No 1272/2008 (CLP) and is not subject to dangerous goods transport regulations. The product contains 0.1 to 1 % each of D4, D5 and D6, substances on the REACH Candidate List of substances of very high concern. Work in a well-ventilated area, wear liquid-tight gloves (EN 374) and safety glasses with side shields, and wash your hands after use. Do not eat, drink or smoke while working. Spilled product makes floors slippery, absorb it with absorbent material. Do not mix with oxidising agents, acids or bases. Store tightly closed in a dry, well-ventilated place. Read the safety data sheet before use.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Technical data sheets
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.