Silicone for Making Soap and Candle Molds – Flexible, Precise, and Long-Lasting
Silicone Molds for Soap and Candles – Flexible, Detailed, and Durable Looking for the best silicone materials to create soap molds or candle molds? At Silicones and More, we offer high-quality silicone rubbers that are perfect for casting detailed and long-lasting shapes. Why silicone is ideal for soap and candle molds Silicone rubber...
This hardener works on all condensation silicones. For standard use, the condensation B 5% catalyst is recommended. Processing The silicone Condensation 20, you can easily mix by hand or machine. Mix the A and B component carefully and in the...
Pourable, addition-curing RTV-2 silicone rubber, especially suitable for all molds of models with extensive undercuts. Excellent flowability and self-deaeration High tear strength Low hardness (Shore A 28) Mixing ratio of 1:1 for straightforward processing Fast and non-shrink cure at room...
This casting mix contains 90% paraffin and 10% stearin. A ready-to-use mix for pouring candles. The combination of paraffin and stearin improves the flammability. Paraffin is a "residual" product of the fossil raw material petroleum. This is a saturated hydrocarbon.The...
A colorless, very soft and stretchable silicone ideally suited for masks, robotics and similar projects. Colorless Low shrinkage <0,1%. Good fluidity Self deaerating Usable on skin Very soft Extremely stretchable Fast Description Silicone soft flex 00-35 is a 2-component (Platinum)...
These relatively hard green silicones are ideal for casting silicone molds that need to be robust so that they don't collapse too quickly. Silicone A Green 30 is an (platinum) addition curing 2-component casting silicone that vulcanises at room temperature....
Low shrinkage of <0.1%. Very liquid so self-deaerating Transparent Shore A 50 stable but flexible Suitable for stable but flexible moulds Siliconen Addition Colorless 25 are ideal to make stable flexible moulds. Description The Silicone Addition Colorless 25 is a...
The Silicones A Colorless 5 is a 2-component (Platinum) addition curing silicone which cures at room temperature. Because of the low shrinkage and very low hardness combined with good strength these silicones are suitable for mask making and for molds...
Low shrinkage of <0.1%. Very liquid so self-deaerating Transparent Shore A 50 stable but flexible Suitable for stable but flexible moulds Siliconen Addition Colorless 50 are ideal to make stable flexible moulds. Description The Silicone Addition Colorless 50 is a...
Silicone A Pink 10 is a (platinum) addition curing 2-component casting silicone that vulcanises at room temperature. The silicone is quite fluid and characterized by a good tensile strength. The product is resistant to temperatures from -40°C to +280°C and is suitable...
This medium hard silicone can be used as a casting material. Suitable for fragile and detailed master models. Yellow Shore (A) 25 (medium hard) Quite liquid (self-deaerating) Relative / good resistance with respect to acid / aggressive substances Easy to...
This silicone has a good fluidity and gives great detail while still remaining strong.The silicone Condensation 20 A + B is a 2-component (poly-condensation curing) castable molding silicone which cures at room temperature. Silicone C 20 -A + B are...
Silicone Condensation Starter kit 20 is based on our 2-component (poly-condensation) casting silicone suited for soap, candle and concrete moulds etc. These Silicones are ideal for making soap Moulds, Candle Moulds, Concrete moulds etc. This Starter kit includes:P 1 kg...
This silicone has a good fluidity and gives great detail while still remaining strong.The silicone Condensation 20 A + B is a 2-component (poly-condensation curing) castable molding silicone which cures at room temperature. Silicone C 20 -A + B are...
This silicone has a good fluidity and gives great detail while still remaining strong.The silicone Condensation 20 A + B is a 2-component (poly-condensation curing) castable molding silicone which cures at room temperature. Silicone C 20 -A + B are...
This silicone has a good fluidity and gives great detail while still remaining strong.The silicone Condensation 20 A + B is a 2-component (poly-condensation curing) castable molding silicone which cures at room temperature. Silicone C 20 -A + B are...
These silicones have good fluidity, provide a lot of detail and have a high tensile strength and are soft. The silicone Condensation 35 is a 2-component cast silicone that hardens at room temperature. Excellent for casting molds for detailed and...
These silicones have good fluidity, provide a lot of detail and have a high tensile strength and are soft. The silicone Condensation 5 is a 2-component cast silicone that cures at room temperature. Excellent for casting molds for fragile objects...
This hardener works on all condensation silicones. This T21 hardener from Wacker makes the silicone more resistant to polyurethane and epoxy. This B component may also be mixed with other condensation B components to achieve a speed of your choice...
This hardener works on all condensation silicones and is especially intended for the Wacker M 4503 condensation silicones. The T-35 is easy to mix with the T-47 for shorter curing times. Processing The condensation hardening silicone can be easily mixed...
This hardener works on all condensation silicones. This T37 hardener from Wacker makes the silicone more resistant to polyurethane and epoxy. This B component may also be mixed with other condensation B components to achieve a speed of your choice...
This hardener works on all condensation silicones. This T40 hardener from Wacker, allows the normal condensation silicones to harden a little faster to a generally usable silicone rubber. This T40 can be used with all condensation hardening silicones and is...
This T 40 paste catalyst is primarily intended for the kneadable Wacker Elastosil M 1470. Processing The condensation hardening silicone can be easily mixed by hand. Mix the A and B components carefully and in the specified ratio. T40 mixture...
This hardener works on all condensation silicones. This hardener is extremely fast. If you want to work very quickly, we recommend using this special B component: Wacker T47 (1-2%). This B component may also be mixed with other condensation B...
This hardener works on all condensation silicones. This T51 hardener from Wacker makes the silicone more resistant to polyester. This B component may also be mixed with other condensation B components to achieve a speed of your choice with the...
Wax Paraffin B600 is a good base wax and is used as a casting wax, or mixed with other wax types. Paraffin wax is a little weaker and shrinks more than microcrystalline wax. Paraffin wax is often whiter than microcrystalline...
Zhermack SFX 00-20 – Ultra-flexible silicone for realistic applications Discover Zhermack SFX 00-20, a colorless, biocompatible silicone rubber with exceptional stretchability and softness. This high-quality 2-component platinum-cured addition silicone is specially developed for applications where realistic skin textures, extreme flexibility...
A colorless, very soft and stretchable silicone ideally suited for masks, robotics and similar projects. Colourless Low shrinkage <0.1%. Good fluidity Self-ventilating Usable on the skin Very soft Extremely stretchy 850% Mixing of components 1:1 according to weight ratios very...
Silicone Molds for Soap and Candles – Flexible, Detailed, and Durable
Looking for the best silicone materials to create soap molds or candle molds? At Silicones and More, we offer high-quality silicone rubbers that are perfect for casting detailed and long-lasting shapes.
Why silicone is ideal for soap and candle molds
Silicone rubber is flexible, stretchable, and extremely precise – down to the micrometer. This makes it perfect for crafting delicate and decorative soaps and candles.
You can choose between:
Oil-releasing silicones: easy demolding and extra glossy surface.
Dry silicones: also provide a glossy finish, if the original model is glossy. Ideal for matte effects or oil-free products.
Your choice depends on the desired look and the complexity of your mold.
Recommended silicone products
We offer a wide range of silicone rubbers for both beginners and professionals:
Condensation Silicone 20 – strong and fast-curing, ideal for liquid or spatula-applied molds.
Starter Kit Condensation 20 – everything you need to start making molds.
Addition Silicone Clear 5 – very soft, perfect for fragile objects. No shrinkage, long-lasting.
Addition Silicone Pink 10 – soft but stable, suitable for tall and thin molds.
Addition Silicone Yellow 25 – medium hardness, flexible and strong for upright molds.
Addition Silicone Green 30 – firm yet flexible, ideal for tall candle molds.
Addition Silicone Clear 50 – the hardest pourable silicone, for strong and durable molds.
Need help choosing?
Feel free to contact us – we’re happy to help you find the right silicone for your project.
