These figures are for guidance only and should not be used in making specifications.

Process

ELASTOSIL® N2010 shows good primerless adhesion to many substrates. We recommend carrying out preliminary tests to optimize conditions for the specific application.

ELASTOSIL® N2010 is a ready-to-use, acid and solvent free, non-corrosive RTV-1 (room temperature vulcanization,
1-component) silicone rubber suitable for many applications. Good adhesion to plastics and metals in combination with elasticity and durability open up a wide range of possible applications.
The consistency of the uncured material allows dipping, spraying and dispensing processing. ELASTOSIL® N2010 shows excellent resistance to weathering, aging, moisture and UV light. The vulcanized silicone rubber remains permanently elastic over a wide temperature range from -50°C to +180°C (-58 to +356°F).
If the removal of silicone rubber from machinery or dispensing equipment is required, turpentine is recommended as a solvent. However, cleaning must take place before the rubber has fully cured.

Packaging and storage

Stored unopened in a dark place between 5 and 25 °C, the product has a shelf life of at least 1 year.

Safety

Signal word: Warning

Hazard statements, H-phrases:

H226 Flammable liquid and damo

EUH208 Contains trimethoxyvinylsilane, 3-(2-Aminoethylamino)propyltriethoxysilane, 3-(triethoxysilane)propylamine. May cause an allergic reaction.

Precautions, P phrases:

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P233 Keep container tightly closed

P243 Take precautions to prevent static electricity discharges.

ELASTOSIL-N-2010-en.pdf

EN - Safety Data Sheet Elastosil N2010.pdf