SilSo Print 21004 – Antistatisch Siliconen Gietrubber voor Pad Printing & Mal Making

Product form

CHT Germany

SilSo Print 21004 – Antistatisch Siliconen Gietrubber voor Pad Printing & Mal Making

Tweecomponenten antistatische addition-cure stempelsilicone voor tampondruk. Mengverhouding 1:1 op gewicht. Pot life 60–90 min, full cure in 12 uur bij kamertemperatuur. Shore A20 / Shore 00: 72. Uitstekende inktbestendigheid en detailweergave. Read more

€122,56 Incl. BTW

SKU: S82130

30-day return period

More than 100,000 satisfied customers

Pay afterwards with Klarna

Lowest Price Guarantee – We match the price +5% extra discount

This product is ordered regularly

Make a choice

1 kg. Set
2 kg. Set
10 kg. Set
50 kg. Set

1 kg. Set

€77,98

€77,98/kg

2 kg. Set

Save €33,40 by volume

€122,56

€61,28/kg

10 kg. Set

Save €250,01 by volume

€529,79

€52,97/kg

50 kg. Set

Save €1.657,34 by volume

€2.241,66

€44,83/kg

✅ Lowest Price Guarantee – Europe
Found this silicone product cheaper elsewhere in Europe? We match the price + 5% extra discount. Terms

Do you have a question about this product?

Contact Us

Share
- WhatsApp
- Deel
- X
- Pin it
- Messenger
- Email
Share

Free pickup in our shop(s)

Compare Added to compare

Tweecomponenten antistatische addition-cure stempelsilicone voor tampondruk. Mengverhouding 1:1 op gewicht. Pot life 60–90 min, full cure in 12 uur bij kamertemperatuur. Shore A20 / Shore 00: 72. Uitstekende inktbestendigheid en detailweergave.

Premium Antistatisch Siliconen Gietrubber voor Professionele Toepassingen

SilSo Print 21004 is een gietbaar, additie-curend twee-componenten siliconen rubber dat uithardt op kamertemperatuur. Het product is speciaal ontwikkeld voor de productie van antistatische siliconen drukpads voor pad-printing toepassingen. Het uitgeharde rubber combineert uitstekende fysische eigenschappen met antistatische eigenschappen – een betrouwbare keuze voor veeleisende druktoepassingen.

Belangrijkste Voordelen

Antistatische eigenschappen: Specifiek geformuleerd voor pad-printing pads die gevoelig zijn voor elektrostatische ontlading.
Minimale krimp (<0,1%): Uiterst nauwkeurige reproductie van fijne details zonder maatafwijking.
Kamertemperatuur uitharding: Geen oven vereist – tack-free na 8–12 uur, volledig uitgehard na 12 uur bij 23°C.
Uitstekende scheurweerstand (3,5 N/mm): Duurzame pads met lange levensduur in productieomgevingen.
Hoge rek bij breuk (350%): Flexibel en veerkrachtig rubber dat complexe vormen nauwkeurig volgt.
Eenvoudige verwerking (1:1 op gewicht): Gelijkmatig mengbaar met de hand of mechanisch bij lage snelheid.

Typische Toepassingen

Productie van antistatische siliconen drukpads voor pad-printing
Mallen voor precisie-gieten in de elektronica-industrie
Reproductie van fijne oppervlaktestructuren in prototyping
Gieten van onderdelen in de automotive sector
Mallen voor decoratieve toepassingen in de kunst- en designsector
Productie van flexibele mallen voor keramiek en gips

Technische Kenmerken

Mengverhouding 1:1 op gewicht. Deel A (translucent) bevat de platinakatalysator; deel B (blauw) is de crosslinker. Uitgehard product: blauw, Shore A 20 / Shore 00 72 / Asker C 43, treksterkte 3,0 N/mm², rek bij breuk 350%, krimp <0,1%. Viscositeit gemengd 6.000–18.000 mPa.s. Pot life 60–90 minuten bij 23°C. Opslagtemperatuur max. 30°C, houdbaarheid 12 maanden in gesloten originele verpakking.

CHT Germany GmbH is een gespecialiseerde fabrikant van hoogwaardige siliconen en functionele chemicaliën, gevestigd in Tübingen, Duitsland. CHT levert technische siliconen voor veeleisende industriële en creatieve toepassingen wereldwijd.

Professionele Ondersteuning

Heeft u vragen over de juiste verwerking, mengapparatuur of specifieke pad-printing toepassingen? Ons technisch team adviseert u graag over de optimale inzet van SilSo Print 21004 in uw productieproces. Neem contact op voor een op maat gemaakt advies.

Safety Information

GHS: H412 (schadelijk voor aquatische organismen met langdurige effecten). Bevat octamethylcyclotetrasiloxane (SVHC). Draag butylrubber handschoenen en veiligheidsbril. Gebruik in goed geventileerde ruimte. Vermijd lozing in het milieu.

Safety Pictograms	Safety Data Sheets (SDS)

Signal Word	H‑code	Hazard Statement	P‑codes	P‑statements
Warning	H412		-	-

More information about H and P statements can be found at UK HSE and ECHA.

Product Properties

Hardness
20Shore A
Hardness of the silicone material
Hardness
72Shore 00
Very soft hardness
Shrinkage
0.1%
Linear shrinkage after curing
Color Blauw Color of the finished product
Density
1.1g/cm³
Density of the cured material
Mix ratio 1A : 1B Mixing ratio A : B
Tensile strength
3.0MPa
Maximum tensile force before breaking
Tear strength
3.5kN/m
Resistance against tearing
Elongation at break
350%
Maximum stretch before breaking
Pot life
60minuten
Working time after mixing
Cure time
720minuten
Time until full cure

Component Properties

Color A Doorschijnend Color of component A
Color B Blauw Color of component B
Viscosity A
16000mPa·s
Viscosity of component A
Viscosity B
10000mPa·s
Viscosity of component B
Density A
1.1g/cm³
Density of component A
Density B
1.1g/cm³
Density of component B

Electrical Properties

Certification & Safety

Chemical resistance Goed Resistance to chemicals
Moisture resistant true Resistant to moisture

Application

Use case Antistatische tampondrukstempels / Pad Printing Intended use
Silicone type ["Platina-gekatalyseerd (addition cure) RTV"] Type of silicone
Cure speed Standaard Speed of curing

Our story

Our story began with our father, the founder of Nedform BV. We— Roel, Rutger, and Rob Collaris —are his sons and wanted to bring his passion and knowledge to the online world. That's how SAM (Silicones and More) was born—a creative space for everyone.

Whether you're a beginner, an expert, or an enthusiastic DIYer looking for the right tools, materials, and some guidance, you've come to the right place. We've worked with silicones, resins, and casting materials ourselves for years. That's why we not only deliver quality but also genuine support—based on experience.

Small team with a great love for creating

Honest advice and reliable materials!

We help makers bring their ideas to life.

More about us

FAQs

What is the delivery time of my order?

Orders placed and paid for on business days will be shipped on the same day in most cases. Orders received on weekends will be processed on the next business day.

We always do our best to ship orders as quickly as possible, but actual shipping times may vary due to high volume, stock availability, or carrier circumstances.

Delivery time depends on the destination country and the carrier. Below is a general indication:

Netherlands: usually within 1 business day
Belgium & Germany: typically within 1–2 business days
Other countries: depends on the destination and the local carrier

Please note: these are guidelines, not guarantees. The final delivery time may differ due to factors beyond our control, such as sorting center delays, public holidays, or exceptionally high volume.

What is the return policy?

We offer a 30-day return policy as an added service. If you'd like to return an item or if there's something wrong with your order, please email us at info@siliconesandmore.com with your name and order number within 30 days of delivery. We'll help you quickly. The full terms and conditions can be found on our returns page.

How can I track my order?

Once your order has been processed and shipped, you'll receive a track and trace code by email, allowing you to easily track your package. Please note that it can sometimes take up to 24 hours after processing for the track and trace to be active.

I have a problem with my order, how can I reach you?

If you have any questions or run into any problems, please feel free to contact us via our contact page or email us at info@siliconesandmore.com . We'll be happy to help you quickly.

If you want an immediate answer, ask our chatbot. They have extensive knowledge of all our products and can often help you right away!

Can I also order for business purposes?

Yes, business orders are possible . Customers within the EU outside the Netherlands can order VAT-free with a valid EU VAT number (0 percent intra-Community supply).

Enter your VAT number on the shopping cart page , not at checkout.

Go to the shopping cart via the link below and enter your VAT number and email address, after which the VAT will be automatically removed.

https://siliconesandmore.com/cart

Please note that if you only enter your VAT number at checkout, it will not be processed correctly and VAT may still be charged.

Huismerk - SAMSAM Bodycasting Set

Huismerk - SAMPorcelain Plaster – Premium Casting Plaster for Molds & Detailed Casts

WackerWacker Elastosil Vario 15 Normal – Translucent Platinum Silicone for Molds & Prototyping

SAM - Silicones and MoreSilicone Condensation 20 Universal Set – Molding rubber for universal molds

SilSo Print 21004 – Antistatisch Siliconen Gietrubber voor Pad Printing & Mal Making

SilSo Print 21004 – Antistatisch Siliconen Gietrubber voor Pad Printing & Mal Making

Pairs well with