Apoxie Sculpt is a self-hardening, waterproof epoxy clay perfect for sculpting, modeling, and repairs. Easy to mix and shape, adheres to most surfaces, and cures rock-hard. Sand, paint or drill after curing. Ideal for artists and professionals alike. Read more
Apoxie Sculpt is a self-hardening, waterproof epoxy clay perfect for sculpting, modeling, and repairs. Easy to mix and shape, adheres to most surfaces, and cures rock-hard. Sand, paint or drill after curing. Ideal for artists and professionals alike.
Size chart
Apoxie Sculpt is a professional-grade two-part epoxy clay that combines the handling qualities of traditional modeling clay with the strength and performance of an industrial epoxy putty. Whether you're restoring, sculpting, crafting jewelry, or building models, this self-hardening epoxy resin clay gives you full control and durable results — no oven required.
Please note: The Apoxie Sculpt (stone) white is not truly white but rather somewhat cream-yellow. For a truly white result choose Apoxie Super White.
Ideal for:
Creating sculptures, figurines, and miniatures
Jewelry making, cosplay, props, and set design
Model restoration and repairs
DIY crafts, home décor & prototypes
Industrial and technical applications
Why Choose Apoxie Sculpt?
✔ Easy to use – Simply mix equal parts A and B ✔ Self-hardening epoxy clay – No baking needed ✔ Waterproof & shrink-free – Strong and durable ✔ Excellent adhesion – Bonds to metal, wood, ceramics, plastics & more ✔ Works like clay – Shape, carve, stamp, or texture ✔ Finishing made easy – Sand, drill, file or paint once cured ✔ Non-toxic & safe – ASTM D4236 certified, safe for hobby and home use ✔ Heat resistant – Up to 160°C, ideal for detailed and technical use
How to Use Apoxie Sculpt
Step 1: Wear gloves and take equal parts of A and B Step 2: Knead and mix until color is uniform (about 2 minutes) Step 3: Apply to your surface and sculpt as desired Step 4: Smooth with a little water for a clean finish Step 5: Let cure for 24 hours before sanding or painting
Tip: Use cold water or olive oil to keep tools and hands clean.
Watch the video below to see how it works!
NOTE:The Apoxy in small packaging (113.4 grams) can often be hard and seem unworkable. The manufacturer indicates that this is not harmful and can be easily solved. This can be done by placing the Apoxy (in original packaging/jar) in the microwave for 5 seconds on the highest setting. The generated heat will soften the Apoxy again. Is the Apoxy still too hard? Then repeat the heating process each time for 5 seconds until the desired hardness has been achieved. Incidentally, this process does not affect the final quality of the epoxy.
Technical Specifications
Characteristic
Value
Mixing ratio
A:B = 1:1
Processing time
2-3 hours
Curing time
24 hours
Density
0.75 g/cm³
High temperature resistance
Up to 160°C
Colour
Various colours available
Electrically insulating
Yes
Non-flammable
Yes
Perfect for precision work & permanent applications!
Useful Tips
Microwave softening: If your Apoxie feels hard (in 113g jars), place the closed jar in the microwave for 5 seconds at max power. Repeat as needed until workable.
Get fine details: Dip tools in cold water for smoother sculpting.
Mix custom colors: Blend different Apoxie Sculpt colors for unique shades.
Clean easily: Use soap and water or Aves® Safety Solvent before the product cures.
Safety First
While Apoxie Sculpt is safe when used correctly, always wear gloves while mixing and a mask when sanding. Work in a ventilated space and avoid direct contact with eyes or prolonged skin exposure. See the Safety Data Sheets (SDS) for full guidelines.
Shelf life
The kneadable epoxy is best stored in closed packaging in a dry place between 6–28°C.
H411 Toxic to aquatic life with long lasting effects.
P-Code precautions
H317 may cause allergic skin reactions
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Safety recommendations: Hazard statements:
P101 - If medical advice is needed, have container or label at hand.
P102 - Keep out of reach of children.
P103 - Read label before use.
Prevention:
P261 - Avoid breathing dust.
P280 - Wear protective gloves (when joining parts A and B). Wear N95 respirator when sanding cured product.
P273 - Avoid release to the environment
Response:
P302 + 352 - After skin contact: Wash with plenty of water.
P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention.
P305 + P351 + P338- If in eyes: Rinse cautiously with water for several minutes. Remove existing contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 - If eye irritation persists: Get medical advice/attention.
P391 - Collect spilled material.
Apoxie Sculpt B
H-Code hazard statements
H317 - may cause allergic skin reactions
H318 - Causes serious eye damage
H315 - Causes skin irritation
H411 - Toxic to aquatic life with long lasting effects
P-Code precautions
H317 - may cause allergic skin reactions
H318 - Causes serious eye damage
H315 - Causes skin irritation
H411 - Toxic to aquatic life with long lasting effects
Safety recommendations: Hazard statements:
P101 - If medical advice is needed, have container or label at hand.
P102 - Keep out of reach of children.
P103 - Read label before use.
Prevention:
P261 - Avoid breathing dust.
P280 - Wear protective gloves (when joining parts A and B). Wear N95 respirator when sanding cured product.
P273 - Avoid release to the environment
Response:
P302 + 352 - After skin contact: Wash with plenty of water.
P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention.
P305 + P351 + P338- If in eyes: Rinse cautiously with water for several minutes. Remove existing contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 - If eye irritation persists: Get medical advice/attention.
Whether you’re an artist, model maker, jeweler, or repair specialist, Apoxie Sculpt delivers unmatched results for creative and functional applications. With its clay-like workability and high-performance epoxy strength, it’s the smart choice for lasting creations.
Bring your ideas to life — order your Apoxie Sculpt now at Siliconesandmore.com!
Safety Information
Safety Pictograms
Safety Data Sheets (SDS)
Signal Word
H‑code
Hazard Statement
P‑codes
P‑statements
More information about H and P statements can be found at
UK HSE
and
ECHA.
Handleidingen
Geen handleidingen beschikbaar voor dit product.
Blogs
YouTube
Geen YouTube videos gekoppeld aan dit product.
Our story
Our story began with our father, the founder of Nedform BV. We— Roel, Rutger, and RobCollaris —are his sons and wanted to bring his passion and knowledge to the online world. That's how SAM (Silicones and More) was born—a creative space for everyone.
Whether you're a beginner, an expert, or an enthusiastic DIYer looking for the right tools, materials, and some guidance, you've come to the right place. We've worked with silicones, resins, and casting materials ourselves for years. That's why we not only deliver quality but also genuine support—based on experience.
Orders placed and paid for on weekdays before 4:00 PM are usually shipped the same day. Orders placed after 4:00 PM or on weekends are processed the next business day.
Netherlands: usually delivery within 1 working day Belgium and Germany: delivery within 1-2 working days Other countries: depending on destination and carrier
What is the return policy?
We offer a 30-day return policy as an added service. If you'd like to return an item or if there's something wrong with your order, please email us at info@siliconesandmore.com with your name and order number within 30 days of delivery. We'll help you quickly. The full terms and conditions can be found on our returns page.
How can I track my order?
Once your order has been processed and shipped, you'll receive a track and trace code by email, allowing you to easily track your package. Please note that it can sometimes take up to 24 hours after processing for the track and trace to be active.
I have a problem with my order, how can I reach you?
If you have any questions or run into any problems, please feel free to contact us via our contact page or email us at info@siliconesandmore.com . We'll be happy to help you quickly.
If you want an immediate answer, ask our chatbot. They have extensive knowledge of all our products and can often help you right away!
Can I also order for business purposes?
Yes, business orders are possible . Customers within the EU outside the Netherlands can order VAT-free with a valid EU VAT number (0 percent intra-Community supply).
Enter your VAT number on the shopping cart page , not at checkout.
Go to the shopping cart via the link below and enter your VAT number and email address, after which the VAT will be automatically removed.
Product information Apoxie Sculpt