Wacker Elastosil FX Thixo – Thickener for Paste-like FX Silicones for Masks & Special Effects

Product form

Wacker

Wacker Elastosil FX Thixo – Thickener for Paste-like FX Silicones for Masks & Special Effects

✔ Thickener for Wacker Elastosil FX silicones
✔ From free-flowing to paste-like
✔ 0.2 % gives a medium flow
✔ 0.5 % gives no flow Read more

€363,00 Incl. BTW

SKU: A11513

30-day return period

More than 100,000 satisfied customers

Pay afterwards with Klarna

Lowest Price Guarantee on Silicones– We match the price +5% extra discount

This product is ordered regularly

Make a choice

50 grams
500 grams
1 kilogram

50 grams

€25,95

500 grams

€190,00

1 kilogram

€363,00

✅ Lowest Price Guarantee – Europe
Found this silicone product cheaper elsewhere in Europe? We match the price + 5% extra discount. Terms

Do you have a question about this product?

Contact Us

✔ Thickener for Wacker Elastosil FX silicones
✔ From free-flowing to paste-like
✔ 0.2 % gives a medium flow
✔ 0.5 % gives no flow

Thickener to make Elastosil FX silicones paste-like

Wacker Elastosil FX Thixo is a thickener made specifically for Wacker Elastosil FX silicones. It lets you thicken the silicone, right up to a paste-like mass. You control the flow with the dosage: without Thixo the silicone flows best, with 0.2 % the flow is medium and with 0.5 % the silicone no longer flows.

Key benefits

Flow to suit: from free-flowing to paste-like.
Low dosage: 0.2 to 0.5 % is enough.
Designed for Elastosil FX: intended for Wacker's FX silicones.

Typical applications

✓ Thickening Elastosil FX silicones for masks and special effects
✓ Props and set building where the silicone must not run

Processing

Weigh out Elastosil FX component A and B and mix them according to the processing instructions of the silicone.
Add FX Thixo at the required dosage: 0.2 % for a medium flow, 0.5 % for no flow.
Stir thoroughly again until the mass is even.

Flow behaviour of Elastosil FX with different dosages of FX Thixo

Points to note

✓ Try a new dosage on a small quantity first.
✓ Elastosil FX is an addition-cure (platinum) silicone. Curing can be inhibited by substances such as sulphur, tin compounds and latex. Use nitrile gloves and, if in doubt, do a small test first.
✓ Store the product between 5 °C and 30 °C in the tightly closed original packaging. Close the packaging immediately after use and use up any remaining material as soon as possible.
✓ The best-before date of each batch is on the label. After that date the product is not automatically unusable, but check its properties before you use it.

Professional support

Not sure which dosage suits your application? Email us at info@siliconesandmore.com and we will help you choose.

Safety Information

No hazard classification is stated for this product on this page. Work safely, as with all chemical products: wear protective nitrile gloves (not latex) and safety glasses, ensure good ventilation and do not eat, drink or smoke while working. Wash your hands after use. Always consult the supplied safety data sheet (SDS) for full information on hazards, handling, storage and first aid.

Safety Pictograms	Safety Data Sheets (SDS)

More information about H and P statements: UK HSE &ECHA

Our story

Our story began with our father, the founder of Nedform BV. We— Roel, Rutger, and Rob Collaris —are his sons and wanted to bring his passion and knowledge to the online world. That's how SAM (Silicones and More) was born—a creative space for everyone.

Whether you're a beginner, an expert, or an enthusiastic DIYer looking for the right tools, materials, and some guidance, you've come to the right place. We've worked with silicones, resins, and casting materials ourselves for years. That's why we not only deliver quality but also genuine support—based on experience.

Small team with a great love for creating

Honest advice and reliable materials!

We help makers bring their ideas to life.

More about us

FAQs

What is the delivery time of my order?

Orders placed and paid for on business days will be shipped on the same day in most cases. Orders received on weekends will be processed on the next business day.

We always do our best to ship orders as quickly as possible, but actual shipping times may vary due to high volume, stock availability, or carrier circumstances.

Delivery time depends on the destination country and the carrier. Below is a general indication:

Netherlands: usually within 1 business day
Belgium & Germany: typically within 1–2 business days
Other countries: depends on the destination and the local carrier

Please note: these are guidelines, not guarantees. The final delivery time may differ due to factors beyond our control, such as sorting center delays, public holidays, or exceptionally high volume.

What is the return policy?

We offer a 30-day return policy as an added service. If you'd like to return an item or if there's something wrong with your order, please email us at info@siliconesandmore.com with your name and order number within 30 days of delivery. We'll help you quickly. The full terms and conditions can be found on our returns page.

How can I track my order?

Once your order has been processed and shipped, you'll receive a track and trace code by email, allowing you to easily track your package. Please note that it can sometimes take up to 24 hours after processing for the track and trace to be active.

I have a problem with my order, how can I reach you?

If you have any questions or run into any problems, please feel free to contact us via our contact page or email us at info@siliconesandmore.com . We'll be happy to help you quickly.

If you want an immediate answer, ask our chatbot. They have extensive knowledge of all our products and can often help you right away!

Can I also order for business purposes?

Yes, business orders are possible . Customers within the EU outside the Netherlands can order VAT-free with a valid EU VAT number (0 percent intra-Community supply).

Enter your VAT number on the shopping cart page , not at checkout.

Go to the shopping cart via the link below and enter your VAT number and email address, after which the VAT will be automatically removed.

https://siliconesandmore.com/cart

Please note that if you only enter your VAT number at checkout, it will not be processed correctly and VAT may still be charged.

Huismerk - SAMSAM Bodycasting Set

Huismerk - SAMPorcelain Plaster – Premium Casting Plaster for Molds & Detailed Casts

WackerWacker Elastosil Vario 15 Normal – Translucent Platinum Silicone for Molds & Prototyping

SAM - Silicones and MoreSilicone Condensation 20 Universal Set – Molding rubber for universal molds

Wacker Elastosil FX Thixo – Thickener for Paste-like FX Silicones for Masks & Special Effects

Wacker Elastosil FX Thixo – Thickener for Paste-like FX Silicones for Masks & Special Effects

Pairs well with