✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100Read more
✔ Hard, Small to slightly larger castings
✔ Beige, Strong, High details, very impact resistant
✔ Shore D 75 Unfilled
✔ Castings 4mm <>30mm
✔ 5-7 minutes working time
✔ Mixing ratio (Weight) 100:100
Size chart
NOTE: Since August 2023, polyurethane with a diisocyanate content of more than 0.1% may only be used in companies where employees have completed the required training.
Companies can register for an online training via THIS link.
A two-component polyurethane (PU) casting system with an optional filler. This casting system is characterized by its quality, ease of use, and very high impact resistance, even when processed at room temperature. The system is ideal for small castings, mold fixation, foundry models, replicas, and prototypes.
Beige colored two or three-piece system
Designed for fast, high-precision castings with high impact strength
Can be poured up to a layer thickness of 40 mm, provided you use sufficient filler
Filler quantity varies depending on application and can even be omitted completely
De-moldable after 10 hours (with a mixture of 1:1:3)
Can be mixed with up to 600% (of total weight) of filler
Technical data
Without filler
Mixing ratio: A:B = 1:1 Processing time at 25°C: 5 minutes De-moulding time at 25°C: 14 hours Density: 1.08 g/cm³ Linear shrinkage: 0.2% Maximum thickness per casting: 4-5 mm. Glass temperature: 55°C Hardness: Shore D 75 Tensile strength: 32 MPa Stretch: 19% Flexural strength: 48 MPa Flexural modulus: 810 MPa Impact resistance: 50 KJ/m² Impact resistance after post-curing 8 hours at 80 o C: 150 KJ/m²
With filler
Mixing ratio: A:B:Filler = 1:1:3 Processing time at 25°C: 4 minutes De-moulding time at 20°C: 10 hours Density 1.6 g/cm³ Linear shrinkage: 0.2% Maximum thickness per casting: 30-40 mm. Glass temperature: 55°C Hardness: Shore D 85
Processing
Add half of the desired filler to component A and the other half to component B. Now mix the filler thoroughly into the components. You can, of course, skip this previous step if you do not wish to use filler. Pour the components together and mix thoroughly again. Pour the mixed product into the mold at a steady rate, taking care not to entrap any air. Excessive heat buildup in castings thicker than 5 or 40 mm can be prevented by pouring multiple successive layers (allowing each layer to set before pouring the next). Wait until the indicated time has elapsed before demoulding. The thermal and mechanical properties will develop quickly, but it is possible to improve the thermal behavior by "post-baking" the casting for 8 hours at a temperature of 80°C. Do NOT use an oven in which you intend to prepare food later!
Important
The moisture absorbers in these products can settle, requiring remixing before use. This can be achieved by shaking the container vigorously before use. The less filler you add, the greater the heat generated during the casting and the less thickly you can pour at a time. Use a mixing bucket with a large surface area to maximize pot life.
Shelf life
The polyurethane casting system should be stored in a dry place between 6–28°C. The expiration date, which assumes storage within the specified conditions, is indicated on the packaging. Opened packages should be used as soon as possible to ensure product quality. The normal shelf life is 6 months.
Safety requirements
Caution: These are chemical products. Handle with care and follow the safety instructions below and on the safety data sheets.
Wear safety equipment such as impermeable gloves and goggles, and ensure adequate ventilation. Always keep out of reach of children and do not allow children to work with this product, even under supervision.
Further important safety information A component: NEUKADUR MultiCast 11
More information about H and P statements can be found at
UK HSE
and ECHA.
Handleidingen
Geen handleidingen beschikbaar voor dit product.
Blogs
YouTube
Geen YouTube videos gekoppeld aan dit product.
Our story
Our story began with our father, the founder of Nedform BV. We— Roel, Rutger, and RobCollaris —are his sons and wanted to bring his passion and knowledge to the online world. That's how SAM (Silicones and More) was born—a creative space for everyone.
Whether you're a beginner, an expert, or an enthusiastic DIYer looking for the right tools, materials, and some guidance, you've come to the right place. We've worked with silicones, resins, and casting materials ourselves for years. That's why we not only deliver quality but also genuine support—based on experience.
Orders placed and paid for on business days will be shipped on the same day in most cases. Orders received on weekends will be processed on the next business day.
We always do our best to ship orders as quickly as possible, but actual shipping times may vary due to high volume, stock availability, or carrier circumstances.
Delivery time depends on the destination country and the carrier. Below is a general indication:
Netherlands: usually within 1 business day
Belgium & Germany: typically within 1–2 business days
Other countries: depends on the destination and the local carrier
Please note: these are guidelines, not guarantees. The final delivery time may differ due to factors beyond our control, such as sorting center delays, public holidays, or exceptionally high volume.
What is the return policy?
We offer a 30-day return policy as an added service. If you'd like to return an item or if there's something wrong with your order, please email us at info@siliconesandmore.com with your name and order number within 30 days of delivery. We'll help you quickly. The full terms and conditions can be found on our returns page.
How can I track my order?
Once your order has been processed and shipped, you'll receive a track and trace code by email, allowing you to easily track your package. Please note that it can sometimes take up to 24 hours after processing for the track and trace to be active.
I have a problem with my order, how can I reach you?
If you have any questions or run into any problems, please feel free to contact us via our contact page or email us at info@siliconesandmore.com . We'll be happy to help you quickly.
If you want an immediate answer, ask our chatbot. They have extensive knowledge of all our products and can often help you right away!
Can I also order for business purposes?
Yes, business orders are possible . Customers within the EU outside the Netherlands can order VAT-free with a valid EU VAT number (0 percent intra-Community supply).
Enter your VAT number on the shopping cart page , not at checkout.
Go to the shopping cart via the link below and enter your VAT number and email address, after which the VAT will be automatically removed.
NOTE: Since August 2023, polyurethane with a diisocyanate content of more than 0.1% may only be used in companies where employees have completed the required training.
