🔥 Heat Update Due to the extreme heat, we and our transport partners (such as PostNL) are temporarily adjusting our operations. As a result, the processing and delivery of orders may take slightly longer than usual. More information.
✔ Minimal change in physical properties over a wide temperature range
✔ Excellent water-repellent properties
✔ Good dielectric properties
✔ Low surface tension and therefore high surface activity
✔ Highly chemically inert
✔ Low pour point (-60°C)
✔ High flash point (>205°C)
✔ Good solubility in a wide range of solvents
✔ready-to-use, one-component system
✔low module
✔excellent primerless adhesion to many substrates
✔no use of organotin catalysts
✔ Flexible at low (-40 °C) and high temperatures (+180 °C)
✔Flowable
✔Low viscosity
✔Solvent-based
✔ Provides excellent adhesion onto various substrates.
✔ For addition curing silicone
✔ Solvent based
✔ Various application methods (e.g. coating, dipping, brushing, spraying)
✔ Further dilution in organic solvents possible
✔ Recommended service temperature from -45 °C to +230 °C
✔ max. recommended short term peak temperature exposure 250°C
✔ non-thixotropic
✔ Flowable
✔ Heat resistant
✔ Low viscosity
✔ One-component
✔ Solvent-free
✔ Acetoxy-curing RTV-1 silicone
✔Low Shore A hardness
✔ Excellent adhesion without primer on many surfaces
✔ Good heat stability
✔ One component
✔ Immediately ready for use
✔ Also usable for FIPG/ CIPG
✔ Self-levelling
✔ Solvent containing
✔ Excellent adhesion on cured silicone rubber
✔ High-tear grade
✔ Recommended service temperature from -45°C to 180°C
✔ Max. recommended short term peak temperature exposure 200°C
✔ One component acid-based curing system.
✔ Self-leveling.
✔ Excellent adhesion on various surfaces
✔ Colorless transparent or Black
✔ Good mechanical properties
✔ Heat resistant
✔ Resistant to weather influences and aging
✔ Permeable to gas and water vapor
✔ One component acid-based curing system.
✔ Self-leveling.
✔ Excellent adhesion on various surfaces
✔ Colorless transparent or Black
✔ Good mechanical properties
✔ Heat resistant
✔ Resistant to weather influences and aging
✔ Permeable to gas and water vapor
✔ Very Hard, Heat resistant up to 380 ° C
✔ Red, Liquid, Non-Bleeding
✔ Shore (A) 60
✔ Low shrinkage (<0.8%)
✔ 40 minutes of working time
✔ Mixing ratio. (Weight) 100: 2
✔ Recommended operating temperature from -45 °C to +180 °C
✔ Neutral curing (Alkoxy), no acid
✔ Sprayable
✔ Good adhesion to many substrates without primer
✔ One component
✔ Solvent free
✔ Self-Leveling