Bright white epoxy clay with a fine grain for visible detail

Aves Apoxie Super White combines the workability of modelling clay with the bonding strength of epoxy. The clay has a firm, fine-grained consistency and a fresh white colour that lets you see details more clearly. You mix equal parts A and B and have about 1 hour of working time. After 24 hours at 20 °C the clay is fully cured, with no shrinkage and a smooth, semi-gloss finish.

Key benefits

• True white: brighter than the Stone White colour of Apoxie Sculpt.
• Fine grain: suitable for fine detail work.
• Bonding strength of epoxy: adheres to most clean surfaces.
• Self-hardening and shrink-free: no oven needed and no shrinkage.
• Water resistant: also water resistant once cured.
• Easy to finish: can be painted, stained and accented.

Typical applications

• ✓ Sculpting
• ✓ Embellishing and accenting
• ✓ Bonding
• ✓ Filling

Processing

1. Wear suitable gloves.
2. Take equal parts A and B and mix for 2 minutes to a homogeneous mass.
3. Let the mixture stand for about 5 minutes before working with it.
4. Work within about 1 hour. Smooth the model with your finger and a little water.
5. After 24 hours at 20 °C the clay is fully cured. You can paint it wet or dry.
6. Remove uncured residue with soap and water.

Points of attention

• ✓ Rub a little olive oil on your hands beforehand and dip your tools in cold water; the clay sticks less and you keep more detail.
• ✓ If the clay is still too sticky after mixing, wait about 5 minutes. It becomes less sticky over time.
• ✓ Wear a dust mask when sanding cured clay.
• ✓ Store closed in a dry place between 6 and 28 °C.

Professional support

Not sure which Apoxie suits your project, or looking for a larger pack size? Email us at info@siliconesandmore.com and we will gladly help.