Aves Apoxie Sculpt – Self-Hardening Epoxy Clay for Sculpting, Model Making & Restoration
Aves Apoxie Sculpt – Self-Hardening Epoxy Clay for Sculpting, Model Making & Restoration
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Self-hardening epoxy clay for sculpting, model making and restoration
Aves Apoxie Sculpt is a two-part epoxy clay that combines the mouldability of modelling clay with the strength and adhesion of epoxy. You knead equal parts A and B together for 2 minutes and then have 1 to 3 hours of working time. Apoxie Sculpt hardens at room temperature without an oven and is hard and waterproof after 24 hours, with 0 % shrinkage and a semi-gloss finish. You can choose from various colours, which can also be intermixed.
Key benefits
- Mouldable like clay: sculpt, cut, stamp and add texture.
- Self-hardening: no oven needed, hard and waterproof after 24 hours.
- 0 % shrinkage: no shrinking or cracking.
- Strong adhesion: bonds to itself, other epoxies, ceramics, metal, wood, stone, glass, plastics, foam and fibreglass.
- Easy to finish: once cured it can be sanded, drilled, filed and painted.
- Freeze-thaw stable: also suitable for outdoor displays.
Typical applications
- ✓ Sculptures, miniatures and dolls
- ✓ Jewellery, cosplay, props and set decoration
- ✓ Restoration and repair of ceramics, porcelain and antiques
- ✓ Model making and prototypes
- ✓ Seam filling, bonding and woodworking
- ✓ Aquarium decoration
Processing
- Wear gloves. Measure equal parts A and B, preferably with separate tools.
- Knead for 2 minutes until the colour is uniform.
- Let the mass rest for about 5 minutes; it will then be easier to handle.
- Sculpt within 1 to 3 hours. Smooth with a wet finger or brush. Dip your tools in cold water for fine detail.
- Let the clay cure at room temperature and do not bake it. After 24 hours it is hard and waterproof.
- Then sand, drill or paint as required.
- Remove uncured residue with soap and water or with Aves Finishing Solution.
Points of attention
- ✓ The colour Stone White is not a bright white but rather creamy. For a true white result, choose Apoxie Super White.
- ✓ The small 113.4 gram pack can feel hard. In that case, warm the closed jar for 5 seconds in the microwave on full power and repeat in 5-second steps if necessary. This does not affect the final quality.
- ✓ A little olive oil on your hands stops the clay from sticking.
- ✓ Wear a dust mask when sanding cured clay.
- ✓ Store closed in a dry place between 6 and 28 °C. The product is freeze-thaw stable.
Professional support
Not sure which Apoxie suits your project, or looking for a larger pack size? Email us at info@siliconesandmore.com and we will gladly help.
| Type | two-part epoxy clay |
|---|---|
| Colour | various colours (see options) |
| Mix ratio A/B | 1:1 (equal parts) |
| Mixing time | 2 minutes |
| Working time | 1 to 3 hours |
| Full cure | 24 hours |
| Shrinkage | 0 % |
| Finish | semi-gloss |
| Curing method | self-hardening at room temperature |
| Storage | closed, dry, 6 to 28 °C |
Safety Information
This product is classified as hazardous. Component A may cause an allergic skin reaction (H317), causes serious eye irritation (H319) and is toxic to aquatic life with long lasting effects (H411). Component B causes skin irritation (H315), may cause an allergic skin reaction (H317), causes serious eye damage (H318) and is toxic to aquatic life with long lasting effects (H411). Signal word: Danger. Wear protective gloves and eye protection when mixing and working. Avoid contact with skin and eyes, avoid release to the environment and collect spillage. Wear a dust mask when sanding cured clay. Always consult the supplied safety data sheet (SDS) for full information on hazards, handling, storage and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Required protection (ISO 7010)
     |
| Signal Word | H‑code | Hazard Statement | P‑codes | P‑statements |
|---|---|---|---|---|
| Warning | H315 | Causes skin irritation | P264 P280 P302+P352 P333+P313 |
|
| Warning | H317 | May cause an allergic skin reaction | P261 P272 P280 P302+P352 P333+P313 P362+P364 |
|
| Danger | H318 | Causes serious eye damage | P280 P305+P351+P338 P310 |
|
| Warning | H319 | Causes serious eye irritation | P264 P280 P305+P351+P338 P337+P313 |
|
| Warning | H411 | Toxic to aquatic life with long lasting effects | P273 P391 P501 |
|
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.