Aves Apoxie Super White – Bright White Epoxy Clay for Sculpting, Detail Work & Bonding
Aves Apoxie Super White – Bright White Epoxy Clay for Sculpting, Detail Work & Bonding
Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 1/4 lb. (113.4 grams)
You will only receive a message about this product, no newsletter.
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Bright white epoxy clay with a fine grain for visible detail
Aves Apoxie Super White combines the workability of modelling clay with the bonding strength of epoxy. The clay has a firm, fine-grained consistency and a fresh white colour that lets you see details more clearly. You mix equal parts A and B and have about 1 hour of working time. After 24 hours at 20 °C the clay is fully cured, with no shrinkage and a smooth, semi-gloss finish.
Key benefits
- True white: brighter than the Stone White colour of Apoxie Sculpt.
- Fine grain: suitable for fine detail work.
- Bonding strength of epoxy: adheres to most clean surfaces.
- Self-hardening and shrink-free: no oven needed and no shrinkage.
- Water resistant: also water resistant once cured.
- Easy to finish: can be painted, stained and accented.
Typical applications
- ✓ Sculpting
- ✓ Embellishing and accenting
- ✓ Bonding
- ✓ Filling
Processing
- Wear suitable gloves.
- Take equal parts A and B and mix for 2 minutes to a homogeneous mass.
- Let the mixture stand for about 5 minutes before working with it.
- Work within about 1 hour. Smooth the model with your finger and a little water.
- After 24 hours at 20 °C the clay is fully cured. You can paint it wet or dry.
- Remove uncured residue with soap and water.
Points of attention
- ✓ Rub a little olive oil on your hands beforehand and dip your tools in cold water; the clay sticks less and you keep more detail.
- ✓ If the clay is still too sticky after mixing, wait about 5 minutes. It becomes less sticky over time.
- ✓ Wear a dust mask when sanding cured clay.
- ✓ Store closed in a dry place between 6 and 28 °C.
Professional support
Not sure which Apoxie suits your project, or looking for a larger pack size? Email us at info@siliconesandmore.com and we will gladly help.
| Type | two-part epoxy clay |
|---|---|
| Colour | white |
| Density | 1.24 g/cm3 |
| Mix ratio A/B | 1:1 (equal parts) |
| Mixing time | 2 minutes |
| Working time | approx. 1 hour |
| Full cure | 24 hours (20 °C) |
| Shrinkage | 0 % |
| Finish | smooth, semi-gloss |
| Curing method | self-hardening at room temperature |
| Storage | closed, dry, 6 to 28 °C |
Safety Information
This product is classified as a skin sensitiser: it may cause an allergic skin reaction (H317). Signal word: Warning. Wear protective gloves and eye protection when mixing and working. Avoid contact with skin and eyes and wash your hands after work. Wear a dust mask when sanding cured material. Always consult the supplied safety data sheet (SDS) for full information on hazards, handling, storage and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Required protection (ISO 7010)
   |
| Signal Word | H‑code | Hazard Statement | P‑codes | P‑statements |
|---|---|---|---|---|
| Warning | H317 | May cause an allergic skin reaction | P261 P272 P280 P302+P352 P333+P313 P362+P364 |
|
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.