Total Cast is a clear resin suitable for coating, laminating and casting up to 20 mm thick.
totalCAST Art Resin has been ASTM certified, non-hazardous and non-toxic. UV Resistance: totalCAST utilises hybrid technology to inhibit yellowing.
This epoxy resin system is used to coat and seal artwork on canvas, wood, MDF, glass, perspex, concrete, metals etc. The product can be applied by pouring, brush or roller. The excellent clarity and optical transparency makes the resin ideally suited for the protection and decoration of paintings, sculptures & collages, photos & prints, wood & timber artefacts (clocks and puzzles etc), pendants, bangles & other jewellery items, flower setting and paperweights.
This formulation represents cutting edge polymeric technology and was developed to offer unrivalled user friendliness and a crystal clear result every time.
Please be advised although our resins are U.V stabilised this does not mean they are U.V proof. Ultimately all our clear epoxy resins will show signs of U.V degradation over time. We work constantly to improve the U.V protection however resins are plastics and over time the sun will always win that battle.
Tecnical data
- Mixing ratio in weight: A:B = 100:100
- Mixing ratio in volume: A:B = 100:100
- Handling time at 23°C/25°C: 15-20 / 10-12 minutes
- Demould time at 23°C: 3-4 hours
- Fully hardened: 5-7 days
- Color: Clear
- Hardness after curing at 25°C: Shore D 70-75
- Hardness after curing at 60°C: Shore D 30-35
- Heat resistance: up to 50°C (120°F)
- Viscosity at 23°C: 3300 mPa⋅s: 3300
- Density at 23°C: 1.05 g/cm³
Differences between totalCAST and MasterCast 1-2-1:
- Mixed viscosity: totalCAST has a lower mixed viscosity and a thinner consistency than MasterCast.
Both can be used as a clear coating resins over existing artwork made with oil paints, acrylics, enamels, watercolours etc, but MasterCast 1-2-1 is better suited to pigmenting in resin art applications. totalCAST is ideal for pouring in moulds for embedding, potting, encapsulating and jewellery production.
Safety Requirements
Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation.
Toxic to aquatic life with long lasting effects.
Skin contact: Remove all contaminated clothes and footwear immediately unless stuck to skin. Wash
immediately with plenty of soap and water.
Eye contact: Bathe the eye with running water for 15 minutes. Consult a doctor.
Ingestion: Wash out mouth with water. Consult a doctor.
Inhalation: Remove casualty from exposure ensuring one's own safety whilst doing so. Consult a doctor.
For further information consult the safety data sheet.
Product information
EN - Product Information totalCAST Clear Art Casting Resin.pdf
EN - Safety Information TotalCAST.pdf
