PlatSil FS-00 is a fast-curing 1A:1B platinum-cured silicone with a Shore hardness of OO52/A5. With a pour time of 8 minutes and a demold time of 30 minutes. Ideal for mold making with fast turnaround times.
PlatSil FS-10 is a fast-curing 1A:1B platinum-cured silicone with a Shore hardness of OO60/A13. With a pour time of 8 minutes and a demold time of just 25 minutes. Ideal for mold making with fast turnaround times.
PlatSil FS-20 is a fast-curing 1A:1B platinum-cured silicone with a Shore hardness of OO66/A20. With an 8-minute pot life and a demold time of just 25 minutes. Ideal for mold making with fast turnaround times.
PlatSil Gel-10 is a 1A:1B platinum-cure silicone with a Shore A10 hardness. With a working time of 6 minutes and a demold time of 30 minutes. Suitable for mold making, prosthetics, and lifecasting. Independently certified skin safe.
PlatSil Gel-25 is a 1A:1B platinum-cured silicone with a Shore hardness of A25. It has a 5-minute working time and a 60-minute demold time. Suitable for mold making, prosthetics, and lifecasting. Independently certified skin-safe.
PlatSil Gel-00 is a 1A:1B platinum-cured silicone system with a Shore OO30 hardness. It is highly versatile and used for molds, prosthetics, and life casting. It has a fast demold time of 30 minutes at room temperature.
Two-component platinum silicone rubber with extreme elongation (>2,000%) and high tear strength. Ideal for mold making, SFX, and high-volume production. Mixing ratio 1A:10B, Shore A25.
Two-component platinum silicone rubber with Shore A40 hardness and high tear strength. Ideal for mold making and high-volume production. Mixing ratio 1A:10B, pot life 30 min.
Vloeibare verdikker voor platina-gekatalyseerde PlatSil siliconen. Maakt brush-on toepassing mogelijk voor deketmlallen. Toevoegen aan het mengsel (max. 5% van totaal gewicht). Wacht tot de eerste laag geleert is voordat je een volgende laag aanbrengt.
✔ Flexible, Strong, good resistance to pu and epoxy
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100: 5
Tweecomponenten antistatische addition-cure stempelsilicone voor tampondruk. Mengverhouding 1:1 op gewicht. Pot life 60–90 min, full cure in 12 uur bij kamertemperatuur. Shore A20 / Shore 00: 72. Uitstekende inktbestendigheid en detailweergave.
Gietbare, additie-uithardende 2-componenten siliconenrubber die bij kamertemperatuur uithardt. Specifiek ontwikkeld voor het maken van antistatische siliconen printpads. De uitgeharde rubber vertoont uitstekende fysische en elektrische eigenschappen.
