🔥 Heat Update Due to the extreme heat, we and our transport partners (such as PostNL) are temporarily adjusting our operations. As a result, the processing and delivery of orders may take slightly longer than usual. More information.
PlatSil FS-00 is a fast-curing 1A:1B platinum-cured silicone with a Shore hardness of OO52/A5. With a pour time of 8 minutes and a demold time of 30 minutes. Ideal for mold making with fast turnaround times.
PlatSil Gels are the industry standard for creating ultra-realistic prosthetics and special effects. These 1A:1B platinum-cured silicones are skin-safe, non-shrinking, and very durable.
PlatSil Gel-0030 is a 1A:1B platinum-cured silicone with a Shore hardness of 0030. It is thinner (6,200 cP) and less tacky after curing than the standard Gel-OO. Ideal for prosthetics, molds, and life-casting. Pot life: 45 minutes; Demold time: 4 hours.
PlatSil Gel-10 is a 1A:1B platinum-cure silicone with a Shore A10 hardness. With a working time of 6 minutes and a demold time of 30 minutes. Suitable for mold making, prosthetics, and lifecasting. Independently certified skin safe.
PlatSil Gel-25 is a 1A:1B platinum-cured silicone with a Shore hardness of A25. It has a 5-minute working time and a 60-minute demold time. Suitable for mold making, prosthetics, and lifecasting. Independently certified skin-safe.
PlatSil Gel-00 is a 1A:1B platinum-cured silicone system with a Shore OO30 hardness. It is highly versatile and used for molds, prosthetics, and life casting. It has a fast demold time of 30 minutes at room temperature.
Two-component platinum silicone rubber with Shore A40 hardness and high tear strength. Ideal for mold making and high-volume production. Mixing ratio 1A:10B, pot life 30 min.
Vloeibare verdikker voor platina-gekatalyseerde PlatSil siliconen. Maakt brush-on toepassing mogelijk voor deketmlallen. Toevoegen aan het mengsel (max. 5% van totaal gewicht). Wacht tot de eerste laag geleert is voordat je een volgende laag aanbrengt.
✔ Flexible, Strong, good resistance to pu and epoxy
✔ White, Good Fluid, Bleeding
✔ Shore (A) 23 ~ 26
✔ Low shrinkage (<0.3%)
✔ 120 minutes working time
✔ Mix ratio (Weight) 100: 5
Gietbare, additie-uithardende 2-componenten siliconenrubber die bij kamertemperatuur uithardt. Specifiek ontwikkeld voor het maken van antistatische siliconen printpads. De uitgeharde rubber vertoont uitstekende fysische en elektrische eigenschappen.
