Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 50 ml
You will only receive a message about this product, no newsletter.
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Retarder for a longer pot life of Elastosil FX silicones
Wacker Inhibitor PT 88 is a retarder (pot life extender) that lowers the reactivity of addition-cure silicones. It extends both the pot life and the cure time. Wacker recommends PT 88 in the Elastosil FX range user guide to slow down the FX silicones. We previously sold this product as Elastosil FX Slow. You add PT 88 in small amounts to the already mixed silicone. According to Wacker, 0.25 % extends the pot life of Elastosil FX 20 from 8 to about 80 minutes.
Key benefits
- More working time: useful for large pieces, complex moulds and work in a warm room.
- Easy to fine-tune: by the drop or as % of A + B, so you can match the working time to your project.
- Small amount: a few drops per 100 grams is enough.
- Versatile: Wacker also lists PT 88 as a retarder for other addition-cure RTV-2 silicones, such as ELASTOSIL RT 601 and RT 604.
Typical applications
- ✓ More pot life with Elastosil FX 10, FX 20, FX 28 and FX Gel 30
- ✓ Large prosthetics, lifecasts and castings where you need more time to pour or brush
- ✓ Working at higher temperatures, where the silicone would otherwise set too quickly
Processing
- Weigh out Elastosil FX component A and B and mix them thoroughly according to the processing instructions of the silicone.
- Then add PT 88 in the required amount and stir thoroughly again.
- Guide values according to Wacker for Elastosil FX, per 100 g FX A/B at 23 °C: without PT 88 about 8 minutes pot life and 35 minutes cure time, with 8 to 10 drops about 60 and 90 minutes, with 12 to 16 drops about 80 and 120 minutes.
- Dosing by weight: according to Wacker, 0.25 % takes FX 20 from 8 to about 80 minutes pot life and from 45 to about 120 minutes cure time.

⚠️ Food and skin contact
Wacker's statements on skin and food contact apply to the FX silicones as supplied. If you add PT 88, you change the composition and those statements no longer apply automatically. If you are making a product for food or skin contact, check with us first what Wacker states for the combination.
Points to note
- ✓ The more PT 88 you add, the longer the pot life and cure time become. Do not add more than necessary and try a new dosage on a small quantity first.
- ✓ Curing is faster in warm conditions and slower in cold conditions. Take this into account when dosing.
- ✓ Elastosil FX is an addition-cure (platinum) silicone. Curing can be inhibited by substances such as sulphur, tin compounds and latex. Use nitrile gloves.
- ✓ Store the product in the tightly closed original packaging and close it immediately after use. The best-before date of each batch is on the label. After that date the product is not automatically unusable, but check its properties before you use it.
Professional support
Not sure how much PT 88 you need for your project? Email us at info@siliconesandmore.com and we will help you choose.
Application
- Silicone type["Addition cure","Auxiliary"]Type of silicone or polymer
Safety Information
The current safety data sheet for Wacker Inhibitor PT 88 is not yet on this page, so we do not state a hazard classification here. Request the SDS from us at info@siliconesandmore.com before you start working with the product. As with all chemical products, work safely: wear nitrile protective gloves (not latex) and safety glasses, ensure good ventilation and do not eat, drink or smoke while working. Wash your hands after use.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Technical data sheets
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.