WACKER AK 200® Silicone Spray – Release Agent and Lubricant for Mould and Model Making & Rubber Care
WACKER AK 200® Silicone Spray – Release Agent and Lubricant for Mould and Model Making & Rubber Care
Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 1 spray can 200 ml Wacker Ak
You will only receive a message about this product, no newsletter.
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Premium Release Agent and Lubricant for Professional Mould and Model Making Applications
WACKER AK 200 Silicone Spray is a versatile release agent and lubricant based on pure, undiluted polydimethylsiloxane with a viscosity of approximately 200 mm²/s. The spray leaves a water-clear, hydrophobic silicone film with high release and lubricating performance. The product is odourless and solvent-free and is supplied in a 200 ml aerosol can with an extension tube for both precise and large-area application.
Key Benefits
- Pure raw material, viscosity 200 mm²/s – the undiluted polydimethylsiloxane ensures a stable and predictable property profile.
- Water-clear, hydrophobic film – repels water and leaves no colour residue on the workpiece.
- High release and lubricating performance – makes releasing rubber and plastic parts easy and lubricates plastic bearings and hinges.
- Low surface tension, 0.021 N/m – the film spreads evenly across the surface for high surface activity.
- Odourless and solvent-free – pleasant to use in workshop and model-making environments.
- Extension tube included – targeted dosing for detail work, or wide spraying for larger surfaces.
Typical Applications
- Release agent in mould and model making with rubber and plastics.
- Lubricant for plastic bearings, hinges and rubber parts.
- Care of rubber and plastic, for example as a cockpit spray.
- Sliding aid for textiles and paper in production and processing machinery.
- Water-repellent protective layer on tools and components.
Instructions for Use
- Clean the parts to be treated and ensure good ventilation.
- Shake the can and spray evenly from a maximum distance of 30 cm.
- Use the extension tube for precise, localised applications.
- Remove the extension tube to spray larger surfaces evenly.
Safety
WACKER AK 200 Silicone Spray is an extremely flammable aerosol in a pressurised container. Do not spray onto open flames or other ignition sources, do not pierce or burn the can, even after use, and protect it from sunlight and temperatures above 50 °C. Consult the safety data sheet for full information.
About Wacker
Wacker Chemie AG is a world market leader in the development and production of silicones for industrial and technical applications.
Professional Support
Unsure whether WACKER AK 200 Silicone Spray is suitable as a release or lubricating agent for your application? Get in touch with us; we are happy to help you make the right choice.
Product Properties
- ColorTransparentColor of the finished product
- Viscosity200mPa·sViscosity of the uncured silicone
Physical Properties
- Ignition temperature400°CTemperature at which the product self-ignites
- Surface tension0.021N/mSurface tension at 25°C
- Refractive index1.403Refractive index at 25°C
Application
- Use caseRelease and lubricating agent for mould and model making, rubber and plastic careIntended use
- Silicone type["Auxiliary"]Type of silicone or polymer
- Active substance100.0%Proportion of active substance
- Application method["Spraying"]How the product is applied
Safety Information
WACKER AK 200 Silicone Spray is classified as an extremely flammable aerosol (H222) and the container is pressurized and may burst if heated (H229). Signal word: Danger. Do not spray onto open flames or other ignition sources and do not pierce or burn the can, even after use. Ensure good ventilation during use and avoid inhaling spray mist. Keep the can away from heat, hot surfaces, sparks and open flames and do not smoke during use. Protect from sunlight and do not expose to temperatures above 50 degrees Celsius. Always consult the current safety data sheet (SDS) for complete information on hazards, handling and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
GHS hazard pictograms
Required protection (ISO 7010)
   |
| Signal Word | H‑code | Hazard Statement | P‑codes | P‑statements |
|---|---|---|---|---|
| Warning | H222 | - | - | |
| Warning | H229 | - | - |
Technical data sheets
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.