Paraffinic Oil HB (White Oil) – Medical-Grade White Mineral Oil for Cosmetics & Plastics Processing
Paraffinic Oil HB (White Oil) – Medical-Grade White Mineral Oil for Cosmetics & Plastics Processing
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Premium Medical-Grade White Mineral Oil for Professional Cosmetics and Plastics Applications
Paraffinic Oil HB, also known to our customers as White Oil, is a highly refined, saturated paraffinic mineral oil of medical grade. It is a colourless, odourless and tasteless liquid that is chemically inert. With a density of 0.85 kg/l at 20 °C, a kinematic viscosity of 15.7 cSt at 40 °C and a flash point of 180 °C, the oil is suitable for the production of medical, pharmaceutical and cosmetic products and as a process oil in the plastics and food industries. The oil complies with FDA 21 CFR 172.878 and 21 CFR 178.3620(a).
Key Benefits
- ✓ Medical grade – highly refined, colourless, odourless and tasteless, suitable for pharmaceutical and cosmetic applications.
- ✓ Chemically inert – stable and non-reactive under normal conditions, preventing unwanted reactions with raw materials.
- ✓ FDA-compliant (21 CFR 172.878 and 178.3620a) – approved for food-contact applications under the stated standards.
- ✓ Low viscosity (15.7 cSt at 40 °C) – flows well and blends easily into formulations and wax.
- ✓ High flash point (180 °C) – safe to process at normal workshop temperatures.
- ✓ Versatile – from cosmetics and pharma to process oil in the plastics and textile industries.
Typical Applications
- → Production of medical, pharmaceutical and cosmetic products
- → Softening and improving the spreadability of wax (advice: add in steps, maximum 10%)
- → Process oil in the plastics industry
- → Applications in the food industry
- → Processing in the textile industry
- → Materials where a medical-grade oil is desired
Processing Instructions
- Determine the desired dosage based on your formulation.
- Add the oil gradually and mix thoroughly until homogeneous.
- When softening wax: add in steps and keep to a maximum of 10% White Oil.
- Store the packaging tightly closed, dry and at room temperature (≤ 40 °C).
Professional Support
Questions about the right dosage of White Oil in your formulation or its suitability for your process? Silicones and More is happy to help. Contact us for personal advice.
Product Properties
- ColorTransparentColor of the finished product
- Viscosity16mPa·sViscosity of the uncured silicone
- Density0.85g/cm³Density of the cured material
Physical Properties
- Flash point180°CMin. temperature at which the product ignites
- Boiling point280°CBoiling point at atmospheric pressure
Certification & Safety
- FDA certifiedYesMeets FDA standards (21 CFR)
Application
- Use caseProcess oil and softener for cosmetics, pharma and plastics processingIntended use
Safety Information
Eurol Paraffinic Oil HB is classified as Aspiration hazard category 1 (H304): may be fatal if swallowed and enters the airways. Signal word Danger, pictogram GHS08. If swallowed, do not induce vomiting and immediately contact a doctor or poison control centre. Keep out of reach of children and store locked up. Prolonged or repeated skin contact may degrease the skin. Recommended personal protective equipment: protective gloves (PVC, neoprene or nitrile), safety goggles in case of splash risk and suitable protective clothing. Ensure good ventilation of the workplace and use a suitable respirator if ventilation is inadequate. Always consult the full Safety Data Sheet (SDS) before working with this product.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
GHS hazard pictograms
Required protection (ISO 7010)
   |
| Signal Word | H‑code | Hazard Statement | P‑codes | P‑statements |
|---|---|---|---|---|
| Danger | H304 | May be fatal if swallowed and enters airways | P301+P310 P331 P405 P501 |
|
Technical data sheets
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.