- Extreme glue, durable and strong
- 3 hours handling time
- Electrically non-conductive
- 0% shrinkage
- Waterproof
- Adheres permanently to many materials
- Non-flammable
Description
This all-purpose two-part paste is safe and easy to use. Once applied the paste is slightly translucent. Apoxie Paste can be colored with a color paste (epoxy dye). By applying water the paste gets a semi-gloss finish. Working time: 1-3 hours. Fully cured after 24 hours. Can be painted. Waterproof, with 0% shrinkage and flexible grip.
Technical data
|
Mixing Ratio (volume)
|
[A: B]
|
1:1
|
|
Processing time
|
[hour]
|
3
|
|
Fully hardened @20ºC
|
[hour]
|
24
|
|
Color
|
[-]
|
translucent
|
|
Density
|
[g/cm³]
|
1,12
|
Processing
Wear protective gloves when working with Apoxie Paste. Take equal parts of A and B (both have a clay-like consistency) and mix for 2 minutes to create a homogeneous mass. For thinner Part A, you can gently warm it in hot water or in the microwave for 10 seconds. Allow to cool prior to processing. Note: Heated products will cure faster.
Mix with a spatula for 2 minutes until the product feels hot and has a homogeneous color. The paste can be colored with a small amount of pigment (or dye) after mixing. The Apoxie Paste can now be applied for 1-3 hours. Spread the Apoxie with tool / spatula. The Apoxie Paste is fully cured after 24 hours. Clean undesirable present Apoxie with soap and water.
Tips
- Apoxie Paste can be tinted with Polyurethane/epoxy dye while mixing to match or create a desired color. Smoothes and cleans up really easily with Aves® Safety Solvent.
- Apoxie Paste works great in Flexible molds!
- Apply over top of foam for a nice hard surface coat (Apoxie Paste does not eat foam)
Shelf life
The Apoxie Paste is best saved in closed container in a dry place between 6-28°C. Shelf life is at least 1 year if properly sealed.
Safety
Both the A and B component may cause skin sensitization. Only use this product with appropriate protective gloves.
If skin sensitation is caused: wash with soap and water. Consult a physician if marks or irritations remains.
Apoxie Paste
H-Code gevarenaanduidingen
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
P-Code Precautionary Statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P261 Avoid breathing dust/fumes/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + 352 IF ON SKIN: Wash with plenty of water/…
P333 + P313 If skin irritation or a rash occurs: Get medical advice/attention.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P337 + P313 If eye irritation persists get medical advice/attention
Product information
Product information Sheet Apoxie Paste
EN - Safety data sheet Apoxie Paste.pdf
