Double coat Matt Set

Product form

VendorDe IJssel Coatings

Double coat Matt Set

Excellent levelling, easy application by brush, roller or spray; Good resistance to various chemicals; Excellent scratch and mar resistance; Excellent... Read more

Weight

Colour

€63,95€52,85 Incl. VATExcl. VAT

Do you have a question about this product?

Contact Us

Everything available from stock

Buy from the specialist

Extensive internal laboratory

Pay later with Klarna!

Excellent levelling, easy application by brush, roller or spray;
Good resistance to various chemicals;
Excellent scratch and mar resistance;
Excellent gloss and colour retention;
Good adhesion to various materials (even without the use of primers);
Suitable as finishing coat in two component paint systems for properly pre-treated wood, steel,
aluminium, epoxy, GRP, ABS, etc.;
Not suitable for surfaces permanently exposed to water.
Temperature resistant up to 70°C

Basic properties (at 23°C and 50% R.H.)

Density: approx. 1,2 g/cm³ (depending on colour)
Solid content: approx. 52 % (volume)
Recommended d.f.t. : 35 - 70 µm (dry), depending on application, see additional information
Dust dry after: approx. 2 hours
Full cure after: approx. 5 days, see additional information
Recoating interval: min. 24 hours, see additional information
max. unlimited, provided gritpapered, clean and dry
Shelf life: separate components, stored cool and dry in original packaging, minimum
12 months
Flash point (DIN53213): Double Coat base component 44°C
Double Coat hardener 45°C

Spreading Rate

At 35 µm (d.f.t.) : 12,3 m²/kg (14,8 m²/l)
At 50 µm (d.f.t.) : 8,6 m²/kg (10,4 m²/l)
At 70 µm (d.f.t.) : 6,2 m²/kg ( 7,4 m²/l)

The practical spreading rate depends on a number of variables, such as: shape and size of object to
be painted, the condition and profile of the substrate, the method of application, climatologic
conditions and skill of labour.

Substrate condition and temperature

Steel : properly derusted (ISO Sa 2 1/2), pre-treated with IJmopox ZF
primer/IJmopox HB coating and sanded with grit paper P180-220;
Aluminium : clean and dry, in good condition, free from any contamination and loose
particles, degreased with Double Coat Degreaser and pre-treated with IJmopox ZF primer/IJmopox HB coating and sanded with grit paper P180-220;
Wood : moisture content maximum 12%, pre-treated with Variopox Injection resin and sanded with grit paper P120;
GRP : dry, sanded with grit paper P220-280 and degreased with Double Coat Degreaser;
Previous two component coatings: clean and dry, in good condition, free from any contamination and loose particles, sanded with grit paper P120-180 and degreased with Double
Coat Degreaser;
Other substrates : clean and dry, in good condition, free from any contamination and loose particles, pre-treated with IJmopox ZF primer or Variopox Injection resin and sanded with grit paper P180-220

During application and curing a minimum temperature of 15ºC is allowed. The temperature of the substrate should be minimum 3ºC above dew point.

Instructions for use:

Mixing ratio: 67,0 base : 33,0 hardener (by weight)
The mixing ratio by volume depends on colour.
Do not prepare more material than can be applied within the pot life of the
mixture.

Induction time: 30 minutes at 20ºC

Pot life:

2 hours at 25 ºC (depending on colour)
3 hours at 20 ºC (depending on colour)
4 hours at 15 ºC (depending on colour)

Application with:

Brush/roller: brush thinner 3-5%, cleaning with brush thinner
Air spray: spray thinner 5-15%, nozzle orifice 1.2-1.4 mm., nozzel pressure 2-3 bar, cleaning with spray thinner
Airless spray: spray thinner 0-5%, nozzle orifice 0.009-0.011 inch, nozzle pressure 160 bar, cleaning with spray thinner

Safety