Wacker G 795 – Silicone Primer for Metal & Plastic

Wacker Wacker G 795 – Primer voor Siliconen voor Metaal & Kunststof

Wacker G 795 – Silicone Primer for Metal & Plastic

50 Gr.
€22,16
Skip to product information
Wacker Wacker G 795 – Primer voor Siliconen voor Metaal & Kunststof
✔ Improves adhesion of condensation- and addition-cure silicones to various surfaces✔ Works on metals, wood and various plastics, among others✔ Also for silicones with a high oil content, such as pad-printing silicones✔ Allow at least 1 hour at ≥ 40 % RH; apply silicone within 5 hours
€22,16
incl. VAT (21%) €18,31 excl. VAT
S11535
Choose from

Temporarily sold out

Leave your email address and we will let you know as soon as this variant is back in stock.

Variant: 50 Gr.

You will only receive a message about this product, no newsletter.

  • 30-day returns
  • Over 100,000 happy customers
  • Pay later with Klarna
  • Personal advice from material experts
  • AliPay
  • American Express
  • Apple Pay
  • Bancontact
  • Bizum
  • Google Pay
  • iDEAL Wero
  • Klarna
  • Maestro
  • Mastercard
  • MB WAY
  • MobilePay
  • PayPal
  • Satispay
  • Union Pay
  • Visa

Question about this product? Our material experts are happy to help you choose the right product. Contact us

Premium silicone-resin primer for professional bonding and embedding applications

Wacker G 795 is a one-component primer (adhesion promoter) based on reactive siloxanes and silicone resins, dissolved in a mixture of isoalkanes. After the solvent has evaporated, the primer forms a rigid silicone-resin film under the influence of atmospheric humidity that adheres firmly to the substrate. The catalysed silicone rubber applied on top forms a firm bond with this resin film during vulcanisation. The primer is yellowish and clear, has an active substance content of 18% and a density of approximately 0.79 g/cm³. It is preferably used with addition-cure RTV-2 silicones from, among others, the Elastosil M and RT ranges, and also bonds silicones with a high oil content (such as pad-printing silicones) to aluminium or plywood.

Key Benefits

  • ✓ Active substance 18% – thin, even resin film that greatly improves adhesion between substrate and silicone rubber.
  • ✓ Reaction time from 1 hour – at room temperature and at least 40% humidity, or 10 minutes at 100°C on metal substrates.
  • ✓ Density 0.79 g/cm³ – low-viscosity solution (approx. 2 mPa·s) that is easy to apply by brushing, dipping or spraying.
  • ✓ Processing window up to 5 hours – apply silicone rubber within 5 hours of drying to avoid loss of bond strength.
  • ✓ Broad substrate suitability – adheres to metals, wood and various plastics, even under fluctuating temperatures, moisture and mechanical stress.
  • ✓ Maximum bond strength after 4 days – usually sufficient adhesion after just 24 hours for trouble-free demoulding.

Typical Applications

  • → Improving adhesion of RTV-2 addition-cure silicones to aluminium and other metals
  • → Bonding silicone rubber to wood and plywood carrier plates
  • → Pre-treatment of plastics such as acrylate, polyamide, polyester and PVC
  • → Pad-printing silicones with a high oil content on metal or wooden carriers
  • → Embedding and bonding metal parts in silicone rubber
  • → Applications with fluctuating temperatures, moisture or tensile and shear stress
⚠️ Caution – flammable: Wacker G 795 has a flash point of 25°C and is a flammable liquid. Keep away from heat, sparks and open flames, do not smoke, and ensure good ventilation and local exhaust extraction.

Processing Instructions

  1. Make the surface to be primed dry, dust-free and grease-free. First clean with a non-polar solvent (e.g. white spirit, boiling range 80–140°C) and then with a polar solvent, preferably acetone.
  2. Remove loose particles; lightly roughen very smooth surfaces by sanding.
  3. Apply the primer very thinly and free of air bubbles by brushing, dipping or spraying. On smooth, non-absorbent surfaces (such as aluminium) as thinly as possible; on rough or absorbent surfaces (such as plywood) more generously.
  4. Allow to react for at least 1 hour at room temperature and at least 40% relative humidity (check with a hygrometer), or 10 minutes at 100°C (metals only).
  5. Apply the catalysed silicone rubber immediately after drying, within 5 hours at the latest, otherwise the bond strength decreases.
  6. Maximum bond strength is reached after 4 days; usually sufficient adhesion for demoulding has built up after just 24 hours.

Wacker Chemie AG is the world market leader in the development and production of silicones for industrial and technical applications.

Get started

Not sure which primer best suits your substrate and silicone type? The right choice depends on the chemistry and surface properties and sometimes requires a preliminary test. Contact our team for personal advice.

Safety and compliance: always consult the safety data sheet (SDS) for complete hazard, handling and processing information before using this product.

Product Properties

  • ColorYellowColor of the finished product
  • TransparencyTransparentDegree of transparency
  • Viscosity
    2mPa·s
    Viscosity of the uncured silicone
  • Density
    0.79g/cm³
    Density of the cured material

Physical Properties

  • Flash point
    25°C
    Min. temperature at which the product ignites
  • Ignition temperature
    240°C
    Temperature at which the product self-ignites
  • Boiling point
    183°C
    Boiling point at atmospheric pressure

Application

  • Use casePrimer / bonding agent for silicone rubber on metal, wood and plasticIntended use
  • Silicone type["Auxiliary"]Type of silicone or polymer
  • Cure conditionRoom temperature or heatCondition under which the material cures
  • Active substance
    18.0%
    Proportion of active substance
  • SolventIsoalkanenSolvent used
  • Application method["Penseel","Dompelen","Spuiten"]How the product is applied
  • Reaction timeVanaf 1 uur bij kamertemperatuur (min. 40% luchtvochtigheid) of 10 minuten bij 100°C op metaalRequired reaction/flash-off time

Safety Information

Wacker G 795 is classified as hazardous. It is a flammable liquid and vapour (flash point 25 degrees Celsius), may be fatal if swallowed and enters the airways, and causes serious eye damage. Avoid contact with eyes and skin, do not breathe vapours or mist, and keep the product away from heat, sparks and open flames. When using, wear protective gloves, tight-fitting safety goggles and suitable protective clothing. Ensure good ventilation and local extraction; use a respirator with an ABEK filter if ventilation is insufficient. Wash hands thoroughly after use and do not eat, drink or smoke while working with this product. Always consult the full safety data sheet (SDS) before using this product.
Safety PictogramsSafety Data Sheets (SDS)
GHS hazard pictograms
GHS02GHS05GHS08
Required protection (ISO 7010)
ISO 7010 M009ISO 7010 M004ISO 7010 M016ISO 7010 M056
Signal WordH‑codeHazard Statement
Warning H226 Flammable liquid and vapour
Danger H304 May be fatal if swallowed and enters airways
Danger H318 Causes serious eye damage
P‑codePrecautionary statement
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P280 Wear protective gloves/protective clothing/eye protection/face protection
P301 + P310 IF SWALLOWED; immediately call a POISON CENTER/doctor

Technical data sheets

Frequently asked questions

What is the delivery time for my order?

Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.

Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.

What is the return policy?

You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.

How can I track my order?

As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.

I have a problem with my order – how do I reach you?

Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.

Can I order as a business?

Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.

EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.

You might also need this