Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
You will only receive a message about this product, no newsletter.
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
The EVD-VE115SV is a compact professional pump at an economical price.
This single- and two-stage oil-lubricated rotary vane pump achieves a very good ultimate vacuum and is easy to work with. Thanks to its compact design and low weight, this pump is used in applications such as:
- Composites industries
- Air-conditioning industry
- Small lifting equipment
- On-site hydraulic repairs
- Vacuum ovens
- Many other applications
Technical data
Vacuum pump EVD-VE115SV
- 2.5 m³/h
- 0.05 mbar
- 200 W
Use
Please note: if you work in a room without good ventilation, we strongly recommend also buying an exhaust filter!
Read the operating manual (below and supplied with the pump) before use.
Before using the pump for the first time, fill it with the oil supplied! Fill with oil up to the level mark in the sight glass.
During use:
1) Set the valve to venting (if you have a system with a 3-way valve, the pump will therefore draw in outside air).
2) Switch the pump on in advance and let it warm up. This is better for the moisture you draw out of the material: it mixes less with the oil and evaporates more readily.
3) Once the product is in the vacuum chamber, you can close the lid and turn the valve so that the pump draws air out of the chamber.
4) Once the product is sufficiently evacuated, it will start to bubble or boil. The product can rise considerably in volume.
5) As soon as the material collapses again or the bubbling subsides, you can hold the vacuum a little longer and then stop by closing the connection to the pump.
6) Let the pump keep running for a while to allow moisture to evaporate, while no more air is being drawn from the vacuum pot.
7) Open the vent to the vacuum chamber slowly so that not too much air rushes in at once, and make sure no dust is drawn into the vacuum chamber. You can also tie a piece of cloth over the inlet for this.
8) When you have finished, you can switch the pump off.
CAUTION: Do not leave the pump switched off while it is still openly connected to an evacuated vacuum vessel! Although all pumps are fitted with a non-return valve, there is a high risk that oil will still be drawn out of the pump.
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.
Technical data sheet EVD-VE115SV