Silicone heat transfer for textiles
With a silicone heat transfer you first make the print on a carrier and then transfer it onto the textile with a heat press. This lets you decorate finished garments, make tagless labels and work with small runs or awkward shapes that cannot be screen printed directly.
Not sure what you need?Ask a specialist →
Filters
Sort Most relevant
No products found.
Try using fewer filters, or clear all filters.
⚠️ Temporarily an information page
The products on this page are not yet active in our webshop. They are available on request through Silicones and More. Send us your application, the textile and the quantity you need, and we will prepare a quote or arrange a sample.
How does a silicone heat transfer work?
A silicone transfer consists of several layers printed in mirror image onto a transfer film or transfer paper. First the visible face, then the colour layers and finally an adhesive layer that bonds to the textile during pressing.
The result is an elastic, PVC free print that is just as wash resistant as a direct silicone print and lends itself well to 3D or high density effects.
- →Print the colour and effect layers in mirror image onto the carrier and flash between layers.
- →Finally print a silicone adhesive layer and, if required, sprinkle a hot melt powder onto the wet adhesive.
- →Cure the transfer so it can be stacked and stored.
- →Press the transfer onto the textile with a heat press and remove the carrier as specified.
Suitable products
| Brand | Product | Properties according to manufacturer | Status |
|---|---|---|---|
| CHT | ALPATRANS BOND | 2K silicone adhesive for heat transfers, cured with ALPAPRINT CAT, can be combined with TUBASSIST ELASTOMELT SI hot melt powder and the NG pastes | On request |
| CHT | TUBASSIST ELASTOMELT SI | Hot melt powder sprinkled onto the adhesive layer for bonding during pressing | On request |
| CHT | ALPAPRINT CLEAR NG / WHITE NG / OPAQUE NG + ALPAPRINT CAT | Print pastes for the face and colour layers, OPAQUE NG also for 3D effects | On request |
| CHT | COLORMATCH SI | Silicone colours based on a reactive silicone polymer, dosage 1 to 20 % | On request |
| Nanotech | Silicone Heat Transfer Inks | PVC and phthalate free, highly stretchable and opaque according to the manufacturer. Product codes not published, we match the system to your application | On request |
| Nanotech | SILME-5500 BASE + SILME-6160 CATALYST | Thinner base (approx. 11 Pa·s) for label coating, 100:3 | On request |
| Nanotech | CSILMENT colour pastes | Colour pastes for SILME, white approx. 10 %, up to 25 % on dark substrates | On request |
Benefits of silicone transfers
- ✓Flexible production: make transfers in advance and press them once the order comes in.
- ✓Also for awkward spots: sleeves, collars, bags and finished garments.
- ✓Tagless: a soft, elastic neck label instead of an itchy textile label.
- ✓PVC free and elastic: a cleaner alternative to plastisol transfers, also on stretch and sportswear.
Tips for the best results
- ✓Choose a carrier suitable for silicone and the press temperature. Test that the transfer releases cleanly.
- ✓Keep the adhesive layer even and sprinkle the hot melt powder onto the still wet adhesive. Shake off excess powder.
- ✓Match press temperature, pressure and time to the textile and follow the TDS of the adhesive system.
- ✓Always test on your own fabric, especially coated or finished polyester.
- ✓Only wash and stretch the print after a full cure to judge adhesion.
Frequently asked questions
What is the difference between a silicone transfer and flex film?
Flex film is cut from a roll and has one fixed colour and thickness. A silicone transfer is printed, can have several colours and 3D effects and feels softer and more elastic.
Can I store silicone transfers?
Yes, fully cured transfers can be stacked and pressed later. Store them dry, dust free and out of direct sunlight.
Does a silicone transfer bond to every textile?
It works well on cotton and most polyester and blended fabrics. Fabrics with a water repellent or silicone finish are more difficult. Always test in advance.
Related categories
Request a heat transfer system
Tell us what you want to make, on which textile and with which press. Email info@siliconesandmore.com.
Product information is based on the manufacturers' technical data sheets, brochures and websites (as of September 2026). Values are typical values and not a specification. Always consult the current TDS and test on your own textile and process. ALPATEC, ALPAPRINT and ALPATRANS are trademarks of CHT, SILME and CSILMENT are trademarks of Nano Tech Chemical Brothers.