Chem-Trend Chemlease PMR EZ – High-Slip Semi-Permanent Release Agent for Composite Moulds
Chem-Trend Chemlease PMR EZ – High-Slip Semi-Permanent Release Agent for Composite Moulds
Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 3.4 kg.
You will only receive a message about this product, no newsletter.
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Semi-permanent release agent for multiple releases per application
Chemlease PMR EZ (PMR-90 EZ) by Chem-Trend is a fast-curing, semi-permanent release agent for composite moulds. One application gives multiple releases, with minimal transfer to the moulded part. It is the highest-slip version in the Chemlease PMR family, mainly intended for closed moulding of abrasive parts or parts with low draft. You apply 4 to 5 coats and can start production after 30 minutes. Available in 3.4 kg.
Key benefits
- Easy to apply: with a cotton cloth, no special equipment needed.
- Multiple releases: per application, with minimal transfer to the part.
- High thermal stability: the release layer is very thermally stable.
- Saves time: less frequent reapplication means less labour time and cost.
- HAP-free: HAPs are not formula constituents. Standard manufacturing may result in trace quantities (less than 0.1%).
Typical applications
- ✓ Composite moulds in closed moulding processes
- ✓ Parts with low draft
- ✓ Abrasive parts that need a lot of slip
Application
- Clean the mould surface thoroughly and remove all traces of wax, release agents and sealers, for example with Chemlease Mold Cleaner EZ.
- Apply the appropriate Chemlease sealer to new or porous moulds first.
- Make sure the surface is dry and free of contaminants.
- Moisten a clean cotton cloth (not dripping wet) and wipe on a smooth, continuous film. Cover no more than 0.6 m² at a time.
- When the film starts to evaporate at the edge, wipe the surface dry with a second clean, dry cotton cloth. Work in circular movements from the outside inwards until the film is dry and clear.
- Repeat until the entire mould surface is covered.
- Apply 4 to 5 coats, allowing 15 minutes between each complete coat.
- Allow 30 minutes after the last coat for full cure, then start production.
Points to note
- ✓ The release agent is highly flammable. Do not use a heat source with this product and keep it away from sparks, open flames and hot surfaces.
- ✓ Work in a well-ventilated area and wear protective gloves and eye protection.
- ✓ Store the product between 10 and 35 °C in a tightly closed container to prevent evaporation and contamination. If it has been stored cold, let it reach room temperature before use.
Professional support
Not sure whether PMR EZ suits your mould and production process? Email us at info@siliconesandmore.com and we will be happy to help.
| Brand | Chem-Trend |
|---|---|
| Product line | Chemlease PMR |
| Type | solvent-based semi-permanent release agent |
| Number of coats | 4 to 5 |
| Time between coats | 15 minutes |
| Cure | 30 minutes after the last coat |
| Maximum area per pass | 0.6 m² |
| Storage temperature | 10 to 35 °C |
| Packaging | 3.4 kg |
Safety Information
Chemlease PMR EZ is a solvent-based release agent and is highly flammable. Keep it away from heat, sparks, open flames and hot surfaces and do not use a heat source with this product. Work in a well-ventilated area and wear protective gloves and eye protection. Eye contact: rinse with running water for 15 minutes and consult a doctor. Skin contact: wash with soap and water. If swallowed: rinse mouth, drink water, do not induce vomiting and consult a doctor. Always consult the supplied safety data sheet (SDS) for full information on hazards, handling, storage and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Required protection (ISO 7010)
  |
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.