Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 50 grams
You will only receive a message about this product, no newsletter.
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Accelerator for a shorter cure time of Elastosil FX silicones
Wacker Elastosil FX Fast is an additive that shortens the standard cure time of Wacker Elastosil FX silicones. It is a highly concentrated platinum solution that you add drop by drop to the already mixed FX silicone. You only need a very small amount: the dosage is calculated in drops per 100 grams of Elastosil FX A/B.
Key benefits
- Shorter cure time: your cast or prosthetic is ready to demould sooner.
- Drop-by-drop dosing: you match the speed precisely to your project.
- Highly concentrated: a small amount is enough.
- Designed for Elastosil FX: intended for Wacker's FX silicones.
Typical applications
- ✓ Working faster with Elastosil FX silicones for special effects
- ✓ Masks, prosthetics and props where you want to shorten the cure time
- ✓ Casts of skin and body parts with Elastosil FX
Processing
- Weigh out Elastosil FX component A and B and mix them according to the processing instructions of the silicone.
- Then add FX Fast drop by drop in the required amount. The dosing chart below applies to drops per 100 grams of Elastosil FX A/B.
- Stir thoroughly again.
- Work within the shortened pot life.

Points to note
- ✓ The more FX Fast you add, the shorter your pot life becomes. Try a new dosage on a small quantity first.
- ✓ Elastosil FX is an addition-cure (platinum) silicone. Curing can be inhibited by substances such as sulphur, tin compounds and latex. Use nitrile gloves and, if in doubt, do a small test first.
- ✓ Store the product between 5 °C and 30 °C in the tightly closed original packaging. Close the packaging immediately after use and use up any remaining material as soon as possible.
- ✓ The best-before date of each batch is on the label. After that date the product is not automatically unusable, but check its properties before you use it.
Professional support
Not sure how much FX Fast you need for your project? Email us at info@siliconesandmore.com and we will help you choose.
Application
- Silicone type["Addition cure","Auxiliary"]Type of silicone or polymer
Safety Information
No hazard classification is stated for this product on this page. Work safely, as with all chemical products: wear protective nitrile gloves (not latex) and safety glasses, ensure good ventilation and do not eat, drink or smoke while working. Wash your hands after use. Always consult the supplied safety data sheet (SDS) for full information on hazards, handling, storage and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Required protection (ISO 7010)
|
Technical data sheets
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.