ACHEM BL-3007S Release Spray – Silicone-Free Wax-Based Release Agent for Casting Molds & Series Production
ACHEM BL-3007S Release Spray – Silicone-Free Wax-Based Release Agent for Casting Molds & Series Production
Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 1 spray
You will only receive a message about this product, no newsletter.
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Premium Silicone-Free Release Agent for Professional Mold Making and Series Production Applications
ACHEM BL-3007S Release Spray is a silicone-free, wax-based release agent in a 500 ml aerosol can. The spray was specially developed for the production of cast parts and leaves a strongly adhering, abrasion-resistant release film, allowing multiple demoldings per application. The active material has a density of 0.76 g/cm³ at 20 °C. Once dry, the film can be polished with a soft cloth to a glossy surface.
Key Benefits
- Silicone-free – leaves no silicone residue on mold, model or cast part.
- Abrasion-resistant release film – withstands wear, so you can demold several times before respraying is needed.
- Strong adhesion to the mold surface – the film stays in place during casting and demolding.
- Can be polished to a gloss – a soft cloth produces a smooth, glossy, high-quality surface.
- Active material density 0.76 g/cm³ – a wax film that sprays thinly and evenly.
- 500 ml aerosol can – ready to use for manual application, including hard-to-reach areas.
Typical Applications
- Releasing cast parts in series production with repeated demolding.
- Releasing the master model when making a silicone mold.
- Treating slightly porous surfaces to which silicone could otherwise adhere.
- Separating layer on cured silicone when making a two-part mold.
- Applications that require silicone-free working, for example when the cast part is post-processed.
Instructions for Use
- Allow the can to reach room temperature beforehand and ensure good ventilation.
- Clean and dry the surface.
- Spray a thin, even layer by hand over the entire surface. Do not skip any areas, as the casting material may adhere to untreated spots.
- Allow the solvent to evaporate completely before casting.
- Polish the film with a soft cloth if desired. An unpolished wax film can give the cast part a slightly matte finish.
Safety
ACHEM BL-3007S is an extremely flammable aerosol in a pressurized container. Do not spray onto open flames or other ignition sources, do not pierce or burn the can, even after use, and protect it from sunlight and temperatures above 50 °C. Store the can dry and well ventilated between 10 and 30 °C, the shelf life is at least 12 months. Consult the safety data sheet for complete information.
About Achem
ACHEM Angewandte Chemie GmbH from Ganderkesee, Germany, specializes in high-quality release agents for practical use in mold and model making.
Professional Support
Choosing between ACHEM BL-3007S and the ACHEM SG-1008S release spray, or unsure which release agent suits your casting or mold material? Contact us at info@siliconesandmore.com, we are happy to help.
Product Properties
- ColorWhiteColor of the finished product
- Density0.76g/cm³Density of the cured material
Application
- Use caseSilicone-free wax-based release agent for mould making and series production of cast partsIntended use
- Silicone type["Auxiliary material"]Type of silicone or polymer
- SolventHydrocarbons (n-alkanes, isoalkanes, cyclics)Solvent used
- Application method["Spraying"]How the product is applied
Safety Information
ACHEM BL-3007S is classified as an extremely flammable aerosol (H222), and the container is under pressure and may burst if heated (H229). Inhaling the vapours may cause drowsiness or dizziness (H336) and the product is toxic to aquatic life with long lasting effects (H411). Repeated exposure may cause skin dryness or cracking (EUH066). Signal word: Danger. Use the spray only in a well-ventilated area and keep the can away from heat, sparks and open flames, no smoking. Wear nitrile gloves, tightly sealed safety glasses and protective clothing. Protect the can from sunlight and temperatures above 50 °C, do not pierce or burn it, even after use, and avoid release to the environment. Always consult the supplied safety data sheet (SDS) for complete information on hazards, handling, storage and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
GHS hazard pictograms
  
Required protection (ISO 7010)
   |
| Signal Word | H‑code | Hazard Statement | P‑codes | P‑statements |
|---|---|---|---|---|
| Warning | EUH066 | Repeated exposure may cause skin dryness or cracking | P264 P362+P364 |
|
| Warning | H336 | May cause drowsiness or dizziness | P261 P271 P312 |
|
| Warning | H411 | Toxic to aquatic life with long lasting effects | P273 P391 P501 |
|
Technical data sheets
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.