ACHEM SG-1008S Release Spray – Wax-Based Release Agent for Model Making & Mold Making
ACHEM SG-1008S Release Spray – Wax-Based Release Agent for Model Making & Mold Making
Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 500 ml.
You will only receive a message about this product, no newsletter.
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Premium Wax-Based Release Agent for Professional Model Making and Mold Making Applications
ACHEM SG-1008S Release Spray is a wax-containing release agent in a 500 ml aerosol can, developed for model making. The spray forms a strongly adhering, uniform and supple release film with good sliding properties and a very high release reserve. The product is white, silicone-free and is used undiluted. The active material has a density of 0.72 g/cm³ at 20 °C.
Key Benefits
- Very high release reserve – sufficient release performance remains even with demanding models.
- Strongly adhering, uniform film – the release film stays on the surface and covers evenly.
- Good sliding properties – the cast part releases smoothly from model or mold.
- Silicone-free – no silicone residue on model or cast part.
- Active material density 0.72 g/cm³ – sprays thinly and evenly.
- 500 ml aerosol can – undiluted and ready to use.
Typical Applications
- Releasing models in model and mold making.
- Releasing the master model when making a silicone mold.
- Treating slightly porous surfaces to which silicone could otherwise adhere.
- Separating layer on cured silicone when making a two-part mold.
- Older or heavily used models that require a high release reserve.
Instructions for Use
- Ensure good ventilation and clean and dry the surface.
- Use the product undiluted.
- Spray a thin, even layer by hand and make sure all areas of the model are wetted. The casting material may adhere to untreated spots.
- Allow the solvent to evaporate completely before casting.
- Keep in mind that a wax film can give the cast part a slightly matte finish, even if the mold is glossy.
Safety
ACHEM SG-1008S is an extremely flammable aerosol in a pressurized container. Do not spray onto open flames or other ignition sources, do not pierce or burn the can, even after use, and protect it from sunlight and temperatures above 50 °C. Store the can dry, frost-free and well ventilated between 10 and 30 °C, the shelf life is at least 12 months. Consult the safety data sheet for complete information.
About Achem
ACHEM Angewandte Chemie GmbH from Ganderkesee, Germany, specializes in high-quality release agents for practical use in mold and model making.
Professional Support
Producing many cast parts in succession and looking for an abrasion-resistant, polishable film? Take a look at the ACHEM BL-3007S release spray. Unsure which release agent best suits your application? Contact us at info@siliconesandmore.com, we are happy to help.
Product Properties
- ColorWhiteColor of the finished product
- Density0.72g/cm³Density of the cured material
Application
- Use caseWax-based release agent for model and mould makingIntended use
- Silicone type["Auxiliary material"]Type of silicone or polymer
- SolventHydrocarbons (n-alkanes, isoalkanes, cyclics)Solvent used
- Application method["Spraying"]How the product is applied
Safety Information
ACHEM SG-1008S is classified as an extremely flammable aerosol (H222), and the container is under pressure and may burst if heated (H229). Inhaling the vapours may cause drowsiness or dizziness (H336) and the product is toxic to aquatic life with long lasting effects (H411). Repeated exposure may cause skin dryness or cracking (EUH066). Signal word: Danger. Use the spray only in a well-ventilated area and keep the can away from heat, sparks and open flames, no smoking. Wear nitrile gloves, tightly sealed safety glasses and protective clothing. Protect the can from sunlight and temperatures above 50 °C, do not pierce or burn it, even after use, and avoid release to the environment. Always consult the supplied safety data sheet (SDS) for complete information on hazards, handling, storage and first aid.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
GHS hazard pictograms
  
Required protection (ISO 7010)
   |
| Signal Word | H‑code | Hazard Statement | P‑codes | P‑statements |
|---|---|---|---|---|
| Warning | EUH066 | Repeated exposure may cause skin dryness or cracking | P264 P362+P364 |
|
| Warning | H336 | May cause drowsiness or dizziness | P261 P271 P312 |
|
| Warning | H411 | Toxic to aquatic life with long lasting effects | P273 P391 P501 |
|
Technical data sheets
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.