Temporarily sold out
Leave your email address and we will let you know as soon as this variant is back in stock.
Variant: 1 kg
You will only receive a message about this product, no newsletter.
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
In stock
Ordered and paid on a working day: usually ships the same day
Delivery to Netherlands: usually within 1 working day
- 30-day returns
- Over 100,000 happy customers
- Pay later with Klarna
- Personal advice from material experts
Question about this product? Our material experts are happy to help you choose the right product. Contact us
Premium Super Hard Porcelain Plaster for Razor-Sharp Casts, Reliefs and Models
Porcelain plaster is a super hard, brilliant white casting plaster based on synthetic alpha gypsum, for casts, reliefs, sculptures and models with a porcelain-like surface. The powder mixes very easily into a free-flowing slurry that reproduces even the finest details from silicone and alginate moulds with razor-sharp precision. You mix 4 parts powder with 1 part water (by weight), have approx. 6 minutes of working time, the plaster sets without additives after approx. 10 minutes and after about 20 minutes you can take the cast out of the mould. No drying or firing is needed. Once fully cured, the surface has a hardness of over 300 N/mm² and can be finished with all common paints.
Key Benefits
- Surface hardness > 300 N/mm²: super hard and break-resistant – casts that can take a knock.
- Razor-sharp details: free-flowing slurry – accurately reproduces even the finest details from silicone and alginate moulds.
- Demould after approx. 20 minutes: fast setting without additives – quickly on to the next cast.
- No drying or firing: cures by itself at room temperature – no oven needed.
- Brilliant white and porcelain-like: smooth, white surface – minimal finishing.
- Easy to finish: can be painted with all common paints – or coloured in the mass with colour powder (pigment).
Typical Applications
- Casts from silicone and alginate moulds, including body casts of hands, feet and faces
- Sculptures, reliefs and ornaments, also for restoration and architectural details
- Model making, prototypes and precision models
- Jewellery and small detailed objects
- Models and master moulds for ceramics
- Decorative objects, interior decoration and art and design projects
- Special effects and props for film, theatre and cosplay
Processing instructions:
- Use only clean water and clean mixing cups and place the mould on a level surface.
- Weigh out powder and water in a 4:1 ratio by weight, for example 400 g powder to 100 g water. Use the calculator below to work out the right quantity for your mould.
- Sprinkle the powder evenly into the water (never water onto the powder) and let it soak for one to two minutes.
- Stir gently for approx. 1 minute into a smooth, homogeneous slurry without stirring in air. Use a mechanical mixer for larger quantities. Never add powder or water once the plaster has started to set.
- Pour within the working time of approx. 6 minutes. First pour a thin stream into the centre of the mould until the whole surface is covered with a bubble-free layer; the rest can be poured in faster.
- Take the cast out of the mould after approx. 20 minutes. The plaster becomes warm as it cures: place it on wooden battens until it has cooled completely so that it does not warp.
- After approx. 8 hours the plaster is fully cured and you can finish the surface as you like, for example with emulsion or opaque paint. To colour the plaster in the mass, use dry colour powders (pigments) suitable for plaster, such as iron oxide pigments. These are available online and will soon be available from us too. Stir approx. 1% pigment (based on the weight of the powder) into the mixing water before sprinkling in the plaster; more than 5% reduces the hardness. Do not use liquid colour pastes, as they make the plaster softer. Always make a test cast first.
How much plaster do I need?
Fill your mould with water, measure how many millilitres it holds and enter that below. The calculator works out exactly how much powder and how much water to weigh out, so you waste as little as possible.
Mixing ratio 4 parts powder to 1 part water, always by weight.
1. Volume of your mould
2. Number of moulds
3. Extra margin
Weigh out this much
How to get the best result
- ✓ Always weigh on kitchen scales. The 4 to 1 ratio is by weight, not by volume. If you measure four jugs of powder against one jug of water, you actually use far too much powder. The mix then becomes too thick, does not flow into the details and traps air.
- ✓ Simply weigh the water too. 1 millilitre of water weighs 1 gram, so you can weigh water and powder on the same scales.
- ✓ Sprinkle the powder into the water, never water onto the powder. Let it soak for one to two minutes without stirring and only then mix until smooth. This alone prevents most air bubbles.
- ✓ Never add powder or water once you have started. The plaster is already setting by then. Topping up causes lumps, weak spots and visible lines in the result.
- ✓ Too little is worse than too much. If you run out halfway through pouring, the cast is lost. So allow at least a 10 per cent margin.
- ✓ With a flexible silicone mould the wall stretches slightly when you fill it with water. The measured volume is then slightly on the generous side, which works in your favour.
Please note
- Plaster becomes warm as it cures. Never pour it directly onto skin; for body casting, first make a mould from alginate or silicone and pour the plaster into that.
- Do not exceed the working time. Plaster that has already started to set cannot be rescued by adding water or powder.
- Avoid creating dust when weighing and sprinkling. Provide extraction if dust forms and wear a dust mask (P1 filter) and safety glasses.
- Do not rinse plaster residues down the drain, as they will harden there. Let leftovers harden and dispose of them with general waste.
- Keep the powder tightly closed, cool and dry. Moisture shortens the shelf life.
Porcelain plaster is supplied under the house brand of Silicones and More, specialists in plaster, silicone and casting materials for makers and professionals.
Professional Support
Questions about the right mixing ratio, choosing your mould or finishing your cast? Email us at info@siliconesandmore.com and we will be happy to help.
Product Properties
- ColorBrilliant whiteColor of the finished product
- TransparencyOpaqueDegree of transparency
- Mix ratio4:1Mixing ratio A : B
- Pot life6minutesWorking time after mixing
- Cure time480minutesTime until full cure
Application
- Use caseCasts, reliefs, sculptures and models from silicone and alginate mouldsIntended use
- Cure speedFastHow quickly the material can be demoulded
- Cure conditionRoom temperatureCondition under which the material cures
- Shelf life12monthsIn unopened original packaging
Processing
- Mix ratio by volume3:1A : B by volume
- Demould time20minutesTime until demoulding
Plaster
- Plaster typeSynthetic alpha gypsumType of gypsum
- Setting time10minutesTime until the plaster sets
- Surface hardness> 300 N/mm²Hardness of the cured surface
- Mixed volume2.4 l per 4 kg powder and 1 l waterVolume of the mixed slurry
- Density of mix2.08g/cm³Density of the mixed plaster
- Powder density2.6g/cm³Density of the plaster powder at 20 °C
- Bulk density of powder1150kg/m³Bulk density of the loose powder
- pH valueapprox. 6.5 (10 g/l, 20 °C)pH of a suspension in water
Safety Information
According to the safety data sheet, porcelain plaster is not classified as hazardous under the CLP Regulation (EC 1272/2008) and is not dangerous goods for transport. The product contains no SVHC substances and is not a skin irritant. The main point to watch is dust when weighing and mixing. Avoid creating dust and provide extraction if dust forms. Wear safety glasses (EN 166) and, if dust forms, a dust mask with a P1 filter. Gloves are not required. After inhalation: fresh air, consult a doctor if symptoms occur. After eye contact: rinse the open eye under running water for 15 minutes. After swallowing: rinse the mouth and drink approx. 500 ml of water. Wash your hands after work. For full information, consult the safety data sheet on this page; the supplied safety data sheet is authoritative.| Safety Pictograms | Safety Data Sheets (SDS) |
|---|---|
Required protection (ISO 7010)
|
Manuals
Technical data sheets
Blogs
3D Printing to Mold - Everything You Need to Know!
Learn how to turn a 3D print into a perfect silicone mold. A complete step-by-step guide with tips for design, printing, post-processing, and casting. Ideal for makers and small producers. Read more…
A first baby hand made of porcelain plaster
A first baby hand made of porcelain plaster from a 3D alginate mold. Read more…
YouTube
Frequently asked questions
What is the delivery time for my order?
Orders placed and paid on working days are in most cases shipped the same day. Weekend orders are processed on the next working day.
Indicative delivery times: Netherlands usually within 1 working day, Belgium and Germany typically 1–2 working days, other countries depending on destination and carrier. These are guidelines, not guarantees: peak periods, public holidays or carrier delays can have an effect.
What is the return policy?
You have 30 days to return after receipt. Email info@siliconesandmore.com within 30 days of delivery with your name and order number. The full conditions are in our return policy.
How can I track my order?
As soon as your order has shipped, you'll receive a track & trace code by email. It can take up to 24 hours before the code is active.
I have a problem with my order – how do I reach you?
Contact us via our contact page or email info@siliconesandmore.com. We're happy to help you quickly.
Can I order as a business?
Yes. Apply for a business account; we review your application within 3 working days. After that you order while logged in and pay on invoice, with payment terms of 14 days after delivery.
EU businesses outside the Netherlands with a valid VAT number order with VAT reverse-charged (0%, intra-community supply). The VAT number is stored in your business account; it cannot be added to an order after it has been placed.